SP470217Q00360003.pdf

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT

1. CONTRACT ID CODE

2. AMENDMENT/MODIFICATION NO.

See Block 14

4. REQUISITION/PURCHASE REQ. NO. 5. PROJECT NO. (If applicable)

6. ISSUED BY CODE SP4702 7. ADMINISTERED BY (If other than Item 6) CODE

8. NAME AND ADDRESS OF CONTRACTOR (No., street, county, State and ZIP Code)

CODE FACILITY CODE

SP470217Q0036

X

2017 SEP 07

10A. MODIFICATION OF CONTRACT/ORDER NO.

10B. DATED (SEE ITEM 13)

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of OffersX X is extended, is not extended.

or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

1 copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

Offers must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended, by one of the following methods:

12. ACCOUNTING AND APPROPRIATION DATA (If required)

A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE CONTRACT ORDER NO.

IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation date, etc. ) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(b).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

E. IMPORTANT: Contractor is not, is required to sign this document and return copies to issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A NAME AND TITLE OF SIGNER (Type or print)

NSN 7540-01-152-8070

Previous edition unusable

STANDARD FORM 30 (REV. 10-83)

Prescribed by GSA FAR (48 CFR) 53.243

16B. UNITED STATES OF AMERICA15B. CONTRACTOR/OFFEROR

(Signature of Contracting Officer)(Signature of person authorized to sign)

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

(a) By completing Items 8 and 15, and returning

DCSO COLUMBUS

ATTN DCSO-C

PO BOX 3990

COLUMBUS OH 43218-3990

15C. DATE SIGNED 16C. DATE SIGNED

D. OTHER (Specify type of modification and authority)

7 SEP 2017

3. EFFECTIVE DATE

See Attached Continuation Sheet(s).

(X)

CHECK ONE

PAGE OF PAGES

9A. AMENDMENT OF SOLICITATION NO.

9B. DATED (SEE ITEM 11)

13. THIS APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

CONTINUED ON NEXT PAGE

Amendment 0003 has been issued to provide a response to all potential vendors for this solicitation. The below information would provide questions (Q) submitted by the contractors through email in regards to ISO Certification 9001:2015 or SP4702-17-Q-0036. And answers (A) to those questions by the Government.

1. Confirm that the headcount listed for each site as “Associates” includes FTE, PTE, and contracted personnel.

TC Lab: 22.

TM Lab 14.

TE Lab 30.

2. Provide a copy of the current ISO 9001:2008 certificate for the certified organization. Note: please do not respond that this will be provided post-award to the successful offeror. All certification bodies are required to verify that the existing certificate has not been suspended or revoked and is free from suspension or revocation. The Certificate is not a classified document and is not subject to FOIA requests. Three (3) Certificates attached.

3. State what exclusions have been taken to ISO 9001:2008 Section 7.

TC Lab:

- Clause 7.3 Design and Development.

- Clause 7.5.2 Validation of processes for production and service provision.

- Clause 7.5.4 Customer Property.

TM Lab:

- Section 7.3 does not apply.

TE Lab:

- Clause 7.3 Design and Development.

4. State when the organization was first certified to ISO 9001 (i.e. year).

TC Lab: 9001:2000 in 2003. However, The Defense Logistics Agency is not an accredited Certification Body

(CB).

TM Lab: 9001:2000 in 2004. However, The Defense Logistics Agency is not an accredited Certification Body

(CB).

TE Lab: 9001:2000 in 2001. However, The Defense Logistics Agency is not an accredited Certification Body

(CB).

5. Has the current Certification Body issued any MAJOR nonconformance's for either standard to the organization in the previous 3 years?

TC Lab: Yes.

TM Lab: No.

TE Lab: No.

6. State whether the organization has copies of the previous 3 years of audit reports as issued by the current Certification Body (YES OR NO).

TC Lab: Yes, the final audit report for 2015 is available.

TM Lab: Yes, the final audit report for 2016 is available.

TE Lab: Yes.

7. State whether the site has copies of the previous 3 years of corrective actions as issued by the current CB and as accepted by the current CB in their possession (YES OR NO).

TC Lab: Yes.

TM Lab: Yes.

TE Lab: No.

8. Provide the contract/solicitation number for the contract that covered the previous 3 years of certification.

TC Lab: N/A, the previous certification was performed by DLA Land and Maritime VQH (within our organization).

PAGE 2 OF 4 PAGESCONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED:

SP470217Q0036-0003

TM Lab: N/A, the previous certification was performed by DLA Land and Maritime VQH (within our organization).

TE Lab: N/A, the previous certification was performed by DLA Land and Maritime VQH (within our organization).

9. Performance Work Statement, page # 1, section 5, letter b - shall read, "The Certification Body (CB) shall be accredited to ISO 17021". The CB’s Accreditation Body (AB) shall be a member of the International Accreditation Forum (IAF) whose membership includes management system certification. A copy of the CB’s accreditation shall be provided with the offeror’s Technical Proposal.

10. Performance Work Statement, page # 2, section 6 - shall read, "The Certification Bodies auditors shall be certified Lead Auditors for ISO 9001:2015 by Exemplar Global and/or the International Registry of Certificated Auditors (IRCA) and shall provide evidence of this certification with their Technical Proposal.”

11. Performance Work Statement, page # 2, section 7 - shall read, "The Certification Body shall provide each lab with its own ISO 9001:2015 certificate within 30 days of the Certification Body receiving acceptable corrective action requests from each lab or from the date of the audit if no nonconformance's are issued.”

12. Clarify whether each lab has its own quality management system OR if all three labs operate under a single quality management system.

Each lab has its own quality management system.

13. If the answer to #12 is that the labs operate under a single QMS, indicate whether management review, internal audits, and corrective actions are coordinated from a single lab and where that lab is located.

Not applicable.

14. Pre-assessment (i.e. mock audit) referenced on page 5 of the PWS under Section 6 is required for each Lab or not?

Pre-assessment is required and multiple CLIN's will be created for this purpose. Attached solicitation adding multiple CLIN's for the pre-assessment under page # 9.

In addition, solicitation will be extend from September 7, 2017 to September 12, 2017.

PAGE 3 OF 4 PAGESCONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED:

SECTION J - LIST OF ATTACHMENTS

List of Attachments

Description File Name

ATTACH.DLA ISO 9001

Certification

PR 69454719 Re- Certification C

ATTACH.P470217Q0037 PR 69454719 Re- Certification C

PAGE 4 OF 4 PAGESCONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED:

ATTACHMENT # 1

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL ITEMS

OFFEROR TO COMPLETE BLOCKS 12, 17, 23, 24, & 30 0069454719

1. REQUISITION NUMBER

2. CONTRACT NO. 3. AWARD/EFFECTIVE

DATE

4. ORDER NUMBER

SP4702-17-Q-0036

5. SOLICITATION NUMBER

2017 AUG 30

6. SOLICITATION ISSUE

DATE

Ricardo Blanco Soto C012583

a. NAME

Phone: 614-692-5296

b. TELEPHONE NUMBER (No Collect calls)

2017 SEP 7

8. OFFER DUE DATE/

LOCAL TIME

9. ISSUED BY CODE SP4702

DCSO COLUMBUS

ATTN DCSO-C

PO BOX 3990

COLUMBUS OH 43218-3990

USA

10. THIS ACQUISITION IS UNRESTRICTED OR SET ASIDE: % FOR:

SMALL BUSINESS

HUBZONE SMALL

BUSINESS

WOMEN-OWNED SMALL BUSINESS

(WOSB) ELIGIBLE UNDER THE WOMEN-OWNED

SMALL BUSINESS PROGRAM

8 (A)

SERVICE-DISABLED

VETERAN-OWNED

SMALL BUSINESS

541990NAICS:

SIZE STANDARD: $15,000,000.00

11. DELIVERYFOR FOB DESTINA-

TION UNLESS BLOCK IS

MARKED

12. DISCOUNT TERMS

13a. THIS CONTRACT IS A

RATED ORDER UNDER

DPAS (15 CFR 700)

DO-C9

13b. RATING

14. METHOD OF SOLICITATION

RFQ IFB RFP

15. DELIVER TO CODE 16. ADMINISTERED BY CODE

17a. CONTRACTOR/ CODE

OFFEROR

FACILITY

CODE

TELEPHONE NO.

18a. PAYMENT WILL BE MADE BY CODE

17b. CHECK IF REMITTANCE IS DIFFERENT AND PUT SUCH ADDRESS IN

OFFER

18b. SUBMIT INVOICES TO ADDRESS SHOWN IN BLOCK 18a UNLESS BLOCK

BELOW IS CHECKED

19.

ITEM NO.

20.

SCHEDULE OF SUPPLIES/SERVICES

21.

QUANTITY

22.

UNIT

23.

UNIT PRICE

24.

AMOUNT

See Schedule, Section B

(Use Reverse and/or Attach Additional Sheets as Necessary)

25. ACCOUNTING AND APPROPRIATION DATA 26. TOTAL AWARD AMOUNT (For Govt. Use Only)

27a. SOLICITATION INCORPORATES BY REFERENCE FAR 52.212-1, 52.212-4. FAR 52.212-3 AND 52.212-5 ARE ATTACHED. ADDENDA ARE ARE NOT ATTACHED

27b. CONTRACT/PURCHASE ORDER INCORPORATES BY REFERENCE FAR 52.212-4. FAR 52.212-5 IS ATTACHED. ADDENDA ARE ARE NOT ATTACHED

28. CONTRACTOR IS REQUIRED TO SIGN THIS DOCUMENT AND RETURN

COPIES TO ISSUING OFFICE. CONTRACTOR AGREES TO FURNISH AND

DELIVER ALL ITEMS SET FORTH OR OTHERWISE IDENTIFIED ABOVE AND ON ANY

ADDITIONAL SHEETS SUBJECT TO THE TERMS AND CONDITIONS SPECIFIED

29. AWARD OF CONTRACT: REF. OFFER

DATED . YOUR OFFER ON SOLICITATION

(BLOCK 5), INCLUDING ANY ADDITIONS OR CHANGES WHICH ARE

SET FORTH HEREIN, IS ACCEPTED AS TO ITEMS:

30a. SIGNATURE OF OFFEROR/CONTRACTOR 31a. UNITED STATES OF AMERICA (SIGNATURE OF CONTRACTING OFFICER)

30b. NAME AND TITLE OF SIGNER (Type or Print) 30c. DATE SIGNED 31b. NAME OF CONTRACTING OFFICER (Type or Print) 31c. DATE SIGNED

SEE SCHEDULE

7. FOR SOLICITATION

INFORMATION CALL:

SEE SCHEDULE

40PAGE 1 OF

03:00 PM

STANDARD FORM 1449 (REV. 2/2012)

Prescribed by GSA - FAR (48 CFR) 53.212

AUTHORIZED FOR LOCAL REPRODUCTION

PREVIOUS EDITION IS NOT USABLE

SEE ADDENDUM

EDWOSB

ATTACHMENT # 2

32a. QUANTITY IN COLUMN 21 HAS BEEN

ACCEPTED, AND CONFORMS TO THE CONTRACT, EXCEPT AS NOTED:RECEIVED INSPECTED

COMPLETE PARTIAL FINAL

STANDARD FORM 1449 (REV. 2/2012) BACK

36. PAYMENT

PARTIAL FINAL

20.

SCHEDULE OF SUPPLIES/SERVICES

21.

QUANTITY

22.

UNIT

23.

UNIT PRICE

24.

AMOUNT

19.

ITEM NO.

32b. SIGNATURE OF AUTHORIZED GOVERNMENT

REPRESENTATIVE

32c. DATE 32d. PRINTED NAME AND TITLE OF AUTHORIZED GOVERNMENT

REPRESENTATIVE

32f. TELEPHONE NUMBER OF AUTHORIZED GOVERNMENT REPRESENTATIVE

32g. E-MAIL OF AUTHORIZED GOVERNMENT REPRESENTATIVE

33. SHIP NUMBER 34. VOUCHER NUMBER 35. AMOUNT VERIFIED

CORRECT FOR

37. CHECK NUMBER

38. S/R ACCOUNT NO. 39. S/R VOUCHER NUMBER 40. PAID BY

42a. RECEIVED BY (Print) 41b. SIGNATURE AND TITLE OF CERTIFYING OFFICER 41c. DATE

42c. DATE REC'D (YY/MM/DD) 42d. TOTAL CONTAINERS

41a. I CERTIFY THIS ACCOUNT IS CORRECT AND PROPER FOR PAYMENT

32e. MAILING ADDRESS OF AUTHORIZED GOVERNMENT REPRESENTATIVE

42b. RECEIVED AT (Location)

SERVICE REQUIREMENT

PR: 69454719

FR: 200069528

Cost Center: 3000511 Ledger: 31002520 Material Code: U004-V00007697 "Scientific and Management Education", NAICS 541990, Unit of Issues "JB" Firm-Fixed-Price Acquisition Unrestricted Acquisition Period of Performance: One (1) base year and two (2) options years.

FOB Inspection at Destination (DoDAAC# SL0700) Acquisition Authority: Federal Acquisition Regulation (FAR) Part 37 "Service Contracting" and FAR 12 "Acquisition of Commercial Items".

Delivery Location: Defense Logistics Agency Land, Product Test Lab "Columbus, TM & TE" and "Philadelphia, TC".

PLEASE PROVIDE THE FOLLOWING INFORMATION SO YOUR COMPANY CAN BE ENTERED INTO OUR COMPUTER SYSTEM

CAGE Code (Commercial & Government Entity No.) _______________ (SF 1449, 1ST PAGE, BLOCK #17a) DUNS (Dun & Bradstreet) No. _________________________ (SF 1449, 1ST PAGE, BLOCK #17a) SAM (System for Award Management) Yes No (circle one)

TAX ID NO. (TIN)_________________________

The Contractor shall be registered in the SAM database prior to submitting an invoice and through final payment of any contract, basic agreement, basic ordering agreement, or blanket purchasing agreement resulting from this solicitation. The SAM registration shall be for the same name and address identified on the contract, with its associated CAGE code and DUNS or DUNS+4. Contractors may obtain information on registration and annual confirmation requirements via the SAM accessed through https://www.acquisition.gov or by calling 866-606-8220, or 334-206-7828 for international calls.

OFFEROR AUTHORIZED REPRESENTATIVE (S): Offerors shall identify individuals (s) authorized to represent the offeror’s position and commit to the offeror in all exchanges between Government and offeror:

Name:_______________________________________ Title/Position:__________________________________ Phone Number:_________________________________ E-Mail Address:_________________________________ Business size (in accordance with Federal Government Standards) Small ____ Large ____Women-Owned____ Disadvantaged _____ Other_____ If on GSA Contract: [ ] GSA Contract #____________________Expiration Date: ______

SINGLE AWARD – The Government intends to award a single contract resulting from this solicitation. Unless otherwise provided in the Schedule, offers may not be submitted for quantities less than those specified. The Government reserves the right to make an award on any item for a quantity less than the quantity offered, at the unit prices offered, unless the offeror specified otherwise in the offer.

********************Wide Area Workflow (WAWF)******************

Information for Wide Area Workflow (WAWF) Invoicing: Use "2 in 1" document Invoice. To ensure timely payment the vendor should enter the required info in WAWF on the day the supplies/services are deliver to the customer or facility. Contractors/vendors not using WAWF will need to register for WAWF in order to gain access to the new MyInvoice functionality. First, the contractor must request access through the following website https://wawf.eb.mil/.

Wide Area Workflow (WAWF) is a secure web based system for electronic invoicing, receipt, and acceptance.

WAWF allows government vendors to submit and track invoices and receipt/acceptance documents over the web and allows government personnel to process those invoices in a real-time, paperless environment.

WAWF is in accordance with the 2001 National Defense Authorization Act (DFARS 252.232-7003/252.232-7006 Electronic Submission of Payment Requests - January 2004) which requires claims for payment under a Department of Defense Contract to be submitted in electronic form.

As of March 03, 2008, DOD has issued a final rule amending the Defense Federal Acquisition Regulation supplement (DFARS) to require use of the Wide Area Workflow as the only acceptable electronic system for submitting requests for payment (invoices and receiving reports) under DOD contracts.

Government credit card would not be utilized for this purchase request. All payments will be processed and submitted through WAWF "only".

When creating invoice in WAWF Contractor "must" input DoDAAC# SL0700 under Service Acceptor field. Otherwise the payment wouldn’t be process on time.

DLA WAWF Assistance (General Questions) 703-767-1915 wawf@dla.mil

For technical issues with WAWF please contact:

DISA WESTHEM Ogden Customer Service Center

CONUS: 1-866-618-5988

COMMERCIAL: 1-801-605-7095

Email: cscassig@csd.disa.mil

Questions may be addressed to:

Ricardo Blanco Phone: 614-692-5296 Fax: 614-693-1572 ricardo.blancosoto@dla.mil

SECTION B

SUPPLIES/SERVICES: U004-V00007697

ITEM DESCRIPTION:

Performance Work Statement (PWS)

1. Title: ISO 9001-2015 Certification for the DLA Product Test Center.

2. General: This ISO Certification provides quality certification for the DLA Product Test Center. Each lab holds a current registration that is valid through 9/30/2018. Each lab has a current registration and the registration information is as follows:

a. TC Lab, Analytical: VQ-224 (Philadelphia, PA)

b. TE Lab, Electronics: VQ-218 (Columbus, Ohio)

c. TM Lab, Mechanical: VQ-225 (Columbus, Ohio)

3. Period of Performance: 10/01/2017 to 9/30/2018, Option Year One (10/01/2018 to 09/30/2019), and Option Year Two (09/30/2019 to 09/30/2020). Registration/Certification is 3 year term (Base and Two Options Year**).

During the option years, each lab will have the ability to invoke a surveillance option.

4. Objective: Obtain ISO 9001-2015 Quality Management System Certification for Product Test Center. ISO will help to maximize conformance analysis and continuous improvement. The Certification will improve productivity and reduce risk. ISO Certification will provide a competitive advantage and a commitment to quality. ISO will provide robust management system that will provide a return on investment by providing a quality management system as a guideline to ensure top rate service. Clearly defined requirements include a commitment from management and oversight by an accredited certification body to help strengthen the management system.

5. Vendor Requirements: At a minimum, the vendor must demonstrate they are capable to provide continuous improvement and customer service to meet the needs of each lab in the Product Test Center by:

a. Providing a single Point of Contact (POC)

b. Be an accredited ISO 9001 Certification.

Upon request, the vendor must be able to supply evidence of certification, references, experience with government/large corporation operations, and/or demonstrate financial stability.

c. Provide access to updates to changes made to ISO 9001

d. Provide each lab with the most current information as it relates to standard requirements.

e. Cost of surveillance option must be a separate line item within the contract per each lab.

f. All travel costs associated with the duration of the ISO audit process, must be included in the cost of the contract (i.e. hotel, airfare, etc.)

6. Specific Tasks:

a. The vendor will provide a knowledgeable auditor as it relates to the quality of:

• ISO 9001-2015 Standards

• Provide surveillance audits on a minimum of annual basis, as requested by each lab (this will be optional for each lab)

• Perform a practice certification assessment/mock audit

• Preform a review of the customer’s documented information to determine compliance to the standard.

• Each lab (Analytical, Electronics, and Mechanical) will be provided with their own detailed report with any issues that need to be addressed

• Perform an on-site visit to each lab (Analytical, Electronics, and Mechanical) to review and verify other documentation:

SUPPLY/SERVICE: U004-V00007697 CONT'D

o Procedures o Work Instructions o Other

• Each Lab will receive a detailed report of the status of System Manual issues and any new issues from the visit.

• Provide an assessment team to conduct a thorough and objective on-site assessment to determine the degree and effectiveness of the implementation of the management system

• Provide a corrective action and/or follow-up visit depending on the results of the assessment.

• Each lab will provide a point of contact to the vendor

• Each lab will set up a schedule/timeline for the audit process with the vendor 30 days after award of contract.

7. Output Requirements:

a. Upon each lab passing the audit, that specific lab will be certified as an independent organization.

b. Upon passing the audit, each lab will receive their own ISO 9001:2015 registration certificate and any other documents that relates to this process process.

c. The vendor will provide each Lab their own certificate within 30 days of completing the audit.

8. Place of Performance: DLA Product Test Center-

a. TM Lab, Mechanical, Building 9 Section 1, 3990 E Broad St. Columbus, OH 43213. TM Lab has 15 Associates.

b. TE Lab, Electronics, Building 11 Section 7, 3990 E. Broad St. Columbus, OH 43213. TE Lab has 30 Associates.

c. TC Lab, Analytical, 700 Robbins Ave. Building 5D, Philadelphia, PA 19111. TC Lab has 22 Associates.

9. Invoice information: Invoices shall be submitted through Wide Area Workflow (WAWF), See DFARS Clause 252.232-7006 Wide Area Workflow Payment Instructions for detailed instructions on how to submit invoices.

10.DODAACs:

a. TM Lab: SL0702 (Columbus, Ohio)

b. TE Lab: SL0700 (Columbus, Ohio)

c. TC Lab: SL0701 (Philadelphia, PA)

Evaluation Factor for Award:

Contract Award will be made to the responsible vendor that offers the Lowest Priced Technically Acceptable quote.

1. Factor 1 "Technical Service Capability"

2. Factor 2 "Past Performance Acceptability".

ITEM NO. SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT .

0001 1.000 JB $ ________________ $ ________________ U004-V00007697

ISO 9001;2015

TM LAB, MECHANICAL

BUILDING 9, SECTION 1

COLUMBUS, OHIO

15 ASSOCIATES

BASE YEAR

SUPPLY/SERVICE: U004-V00007697 CONT'D

DELIVERY TO:

COLUMBUS LOCATION (TWO SITES):

SITE ONE, COLUMBUS, OHIO

SL0700

DLA PRODUCT TESTING CTR ELECTRONIC

DSCC-TE BLDG 11 SECTION 7

3990 E BROAD STREET PO BOX 3990

COLUMBUS OH 43213-5000

US

(REQUIRES INDIVIDUAL CERTIFICATION)

SITE TWO, COLUMBUS, OHIO

SL0700

DLA PRODUCT TESTING MECHANICAL

DSCC-TM BLDG 9 SECTION 1

3990 E BROAD STREET PO BOX 3990

COLUMBUS OH 43213-5000

US

(REQUIRES INDIVIDUAL CERTIFICATION)

SITE ONE, PHILADELPHIA, PA

PHILADELPHIA LOCATION (ONE PLACE):

DLA PROD TESTING CTR CODE DSCC-VF

DEFENSE SUPPLY CENTER PHILADELPHIA

700 ROBBINS AVENUE BLDG 5D

PHILADELPHIA PA 19111-5008

US

(REQUIRES INDIVIDUAL CERTIFICATION)

MAIN POINT OF CONTACTS

JOSEPH MAY (COLUMBUS SITE-TE LAB, ELECTRONICS)

ELECTRONICS ENGINEER

DEFENSE LOGISTICS AGENCY, PRODUCT TEST CENTER .

3990 E BROAD ST.

BUILDING 11 SECTION 7

COLUMBUS OH 43218

WORK PHONE: 614-692-8913

EMAIL: JOSEPH.MAY@DLA.MIL

TINA JOHNSTON (COLUMBUS, OH SITE- TM LAB, MECHANICAL)

MANAGEMENT ANALYST

DEFENSE LOGISTICS AGENCY, PRODUCT TEST CENTER

3990 E BROAD ST.

BUILDING 11 SECTION 7

COLUMBUS OH 43218

WORK PHONE: 614-692-9587

EMAIL: TINA.JOHNSTON@DLA.MIL

SUPPLY/SERVICE: U004-V00007697 CONT'D

EDWARD FRANCOEUR (PHILADELPHIA, PA - TC LAB, ANALYTICAL)

DEFENSE LOGISTICS AGENCY, PRODUCT TEST CENTER

700 ROBBINS AVENUE BUILDING 5D

PHILADELPHIA, PA 19111-5008

WORK PHONE: 215-737-3244

EMAIL: EDWARD.FRANCOEUR@DLA.MIL

WIDE AREA WORKFLOW REPRESENTATIVE:

JILL SCHMITZ

3990 E BROAD ST.

BUILDING 11 SECTION 7

COLUMBUS OH 43218

WORK PHONE: 614-692-2420

EMAIL: JILL.SCHMITZ@DLA.MIL

CONTRACTING OFFICE

RICARDO BLANCO

3990 E BROAD ST.

BUILDING 11 SECTION 7

COLUMBUS OH 43218

WORK PHONE: 614-692-5296

EMAIL: RICARDO.BLANCOSOTO@DLA.MIL

ITEM NO. SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

0002 D399-V00010347 1.000 JB $ ________________ $ ________________

Travel

ITEM NO. SUPPLIES/SERVICES QUANTITY

0003 1.000

UNIT UNIT PRICE AMOUNTT

$ ________________ $ ________________ JB U004-V00007697

ISO 9001;2015

TE LAB, ELECTRONICS

BUILDING 11, SECTION 7

COLUMBUS, OHIO

30 ASSOCIATES

ITEM NO. SUPPLIES/SERVICES QUANTITY

0004 1.000

UNIT UNIT PRICE AMOUNTT

J B $ ________________ $ ________________ D399-V00010347 Travel

SUPPLY/SERVICE: D399-V00010347

CONT'D .

ITEM NO. SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

0005 1.000 JB $ ________________ $ ________________

D399-V00010347 Travel

ITEM NO. SUPPLIES/SERVICES QUANTITY

ITEM NO. SUPPLIES/SERVICES QUANTITY

1.000

1.000

UNIT UNIT PRICE

UNIT UNIT PRICE

AMOUNT

AMOUNT

JB

JB

U004-V00007697

ISO 9001;2015

TC LAB, ANALYTICAL

BUILDING 5D

PHILADELPHIA, PA

22 ASSOCIATES

UNIT UNIT PRICE

AMOUNT

J B

ITEM NO. SUPPLIES/SERVICES QUANTITY

B550-V00006540 Org/Admin/ PersonneI Studies

TM LAB,

MECHANICAL

BUILDING 9,

SECTION 1

COLUMBUS, OHIO

1.000

B550-V00006540 Org/Admin/ Personnel Studies

TE LAB, ELECTRONICS

BUILDING 11, SECTION 7

COLUMBUS, OHIO

B550-V00006540 Org/Admin/PersonneI Studies

TC LAB, ANALYTICAL

BUILDING 5D

PHILADELPHIA, PA

ITEM NO. SUPPLIES/SERVICES QUANTITY

1.000

UNIT PRICE AMOUNT

UNIT

UNIT

J B

PREASSESSMENT FOR EACH PTC LAB

SUPPLY/SERVICE: D399-V00010347 CONT'D

ITEM NO. SUPPLIES/SERVICES QUANTITY

UNIT UNIT PRICE AMOUNT .

D399-V00010347

1.000 JB $ ________________ $ ________________

Travel

ITEM NO. SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

1002 1.000 JB $ ________________ $ ________________

ITEM NO. SUPPLIES/SERVICES QUANTITY

ITEM NO. SUPPLIES/SERVICES QUANTITY

ITEM NO. SUPPLIES/SERVICES QUANTITY

ITEM NO. SUPPLIES/SERVICES QUANTITY

D399-V00010347 Travel

D399-V00010347 Travel

1.000

1.000

1.000

1.000

JB

UNIT UNIT PRICE

UNIT UNIT PRICE

UNIT UNIT PRICE

UNIT UNIT PRICE

JB

JB

JB

AMOUNT

AMOUNT

AMOUNT

AMOUNT

U004-V00007697

ISO 9001;2015

TC LAB, ANALYTICAL

BUILDING 5D

PHILADELPHIA, PA

22 ASSOCIATES

U004-V00007697

ISO 9001;2015

TE LAB, ELECTRONICS

BUILDING 11, SECTION 7

COLUMBUS, OHIO

30 ASSOCIATES

U004-V00007697

ISO 9001;2015

TM LAB, MECHANICAL

BUILDING 9, SECTION 1

COLUMBUS, OHIO

OPTION YEAR ONE

SECTION BSUPPLY/SERVICE: U004-V00007697 CONT'D

ITEM NO. SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

2001 1.000 JB $ ________________ $ ________________

D399-V00010347 Travel

ITEM NO. SUPPLIES/SERVICES QUANTITY

ITEM NO. SUPPLIES/SERVICES QUANTITY

ITEM NO. SUPPLIES/SERVICES QUANTITY

ITEM NO. SUPPLIES/SERVICES QUANTITY

ITEM NO. SUPPLIES/SERVICES QUANTITY

D399-V00010347 Travel

D399-V00010347 Travel

1.000

1.000

1.000

1.000

1.000

JB $ ________________ $ ________________

JB $ ________________ $ ________________

JB $ ________________ $ ________________

JB $ ________________ $ ________________

JB $ ________________ $ ________________

UNIT UNIT PRICE

UNIT UNIT PRICE

UNIT UNIT PRICE

UNIT UNIT PRICE

UNIT UNIT PRICE

AMOUNT

AMOUNT

AMOUNT

AMOUNT

AMOUNT

U004-V00007697

ISO 9001;2015

TC LAB, ANALYTICAL

BUILDING 5D

PHILADELPHIA, PA

22 ASSOCIATES

U004-V00007697

ISO 9001;2015

TE LAB, ELECTRONICS

BUILDING 11, SECTION 7

COLUMBUS, OHIO

30 ASSOCIATES

U004-V00007697

ISO 9001;2015

TM LAB, MECHANICAL

BUILDING 9, SECTION 1

COLUMBUS, OHIO

OPTION YEAR TWO

SECTION A - SOLICITATION/CONTRACT FORM

SECTION B- PAGES 6 THROUGH 11.

SECTION C - SPECIFICATIONS/SOW/SOO/ORD

C05 CHANGES TO KEY PERSONNEL (OCT 2016)

SECTION D - PACKAGING AND MARKING- NOT APPLICABLE.

SECTION E - INSPECTION AND ACCEPTANCE

52.246-04 INSPECTION OF SERVICES - FIXED PRICE (AUG 1996) FAR

252.246-7000 MATERIAL INSPECTION AND RECEIVING REPORT (MAR 2008) DFARS

SECTION F - DELIVERIES OR PERFORMANCE

52.242-15 STOP-WORK ORDER (AUG 1989) FAR

52.242-17 GOVERNMENT DELAY OF WORK (APR 1984) FAR

52.247-34 F.O.B. DESTINATION (NOV 1991) FAR

52.247-58 LOADING, BLOCKING, AND BRACING OF FREIGHT CAR SHIPMENTS (APR 1984) FAR

SECTION G - CONTRACT ADMINISTRATION DATA

252.232-7006 WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (MAY 2013) DFARS

As prescribed in 232.7004(b), use the following clause:

(a) Definitions. As used in this clause—

“Department of Defense Activity Address Code (DoDAAC)” is a six position code that uniquely identifies a unit, activity, or organization.

“Document type” means the type of payment request or receiving report available for creation in Wide Area WorkFlow (WAWF).

“Local processing office (LPO)” is the office responsible for payment certification when payment certification is done external to the entitlement system.

(b) Electronic invoicing. The WAWF system is the method to electronically process vendor payment requests and receiving reports, as authorized by DFARS 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.

(c) WAWF access. To access WAWF, the Contractor shall—

(1) Have a designated electronic business point of contact in the System for Award Management at https://www.acquisition.gov; and

(2) Be registered to use WAWF at https://wawf.eb.mil/ following the step-by-step procedures for self-registration available at this web site.

(d) WAWF training. The Contractor should follow the training instructions of the WAWF Web-Based Training Course and use the Practice

Training Site before submitting payment requests through WAWF. Both can be accessed by selecting the “Web Based Training” link on the WAWF home page at https://wawf.eb.mil/

(e) WAWF methods of document submission. Document submissions may be via web entry, Electronic Data Interchange, or File Transfer Protocol.

(f) WAWF payment instructions. The Contractor must use the following information when submitting payment requests and receiving reports in WAWF for this contract/order:

(1) Document type. The Contractor shall use the following document type(s).

______2 IN 1_____________________________________________________

(Contracting Officer: Insert applicable document type(s).

Note: If a “Combo” document type is identified but not supportable by the Contractor’s business systems, an “Invoice” (stand-alone) and “Receiving Report” (stand-alone) document type may be used instead.)

(2) Inspection/acceptance location. The Contractor shall select the following inspection/acceptance location(s) in WAWF, as specified by the contracting officer.

_________SL0700__________________________________________________

(Contracting Officer: Insert inspection and acceptance locations or “Not applicable.”)

(3) Document routing. The Contractor shall use the information in the Routing Data Table below only to fill in applicable fields in WAWF when creating payment requests and receiving reports in the system.

Routing Data Table* Field Name in WAWF Data to be entered in WAWF Pay Official DoDAAC SL4701 Issue By DoDAAC SP4702 Admin DoDAAC SP4702 Inspect By DoDAAC SL0700 Ship To Code Ship From Code Mark For Code Service Approver (DoDAAC) Service Acceptor (DoDAAC) SL0700 Accept at Other DoDAAC LPO DoDAAC DCAA Auditor DoDAAC Other DoDAAC(s)

(*Contracting Officer: Insert applicable DoDAAC information or “See schedule” if multiple ship to/acceptance locations apply, or “Not applicable.”)

(4) Payment request and supporting documentation. The Contractor shall ensure a payment request includes appropriate contract line item and subline item descriptions of the work performed or supplies delivered, unit price/cost per unit, fee (if applicable), and all relevant back-up documentation, as defined in DFARS Appendix F, (e.g. timesheets) in support of each payment request.

(5) WAWF email notifications. The Contractor shall enter the e-mail address identified below in the “Send Additional Email Notifications” field of WAWF once a document is submitted in the system.

JILL SCHMITZ (NOT CONTRACTING OFFICER)

(Contracting Officer: Insert applicable email addresses or “Not applicable.”)

(g) WAWF point of contact.

(1) The Contractor may obtain clarification regarding invoicing in WAWF from the following contracting activity’s WAWF point of contact.

JILL SCHMITZ (NOT CONTRACTING OFFICER)

(Contracting Officer: Insert applicable information or “Not applicable.”)

(2) For technical WAWF help, contact the WAWF helpdesk at 866-618-5988.

(End of clause)

SECTION I - CONTRACT CLAUSES

252.201-7000 CONTRACTING OFFICER'S REPRESENTATIVE (DEC 1991) DFARS

252.203-7000 REQUIREMENTS RELATING TO COMPENSATION OF FORMER DOD OFFICIALS (OCT 2016) DFARS

252.203-7002 REQUIREMENT TO INFORM EMPLOYEES OF WHISTLEBLOWER RIGHTS (SEP 2013) DFARS

252.203-7995 PROHIBITION ON CONTRACTING WITH ENTITIES THAT REQUIRE CERTAIN INTERNAL CONFIDENTIALITY

AGREEMENTS (NOV 2016) DFARS

52.204-13 SYSTEM FOR AWARD MANAGEMENT MAINTENANCE (OCT 2016) FAR

52.204-19 INCORPORATION BY REFERENCE OF REPRESENTATIONS AND CERTIFICATIONS (DEC 2014) FAR

52.204-21 BASIC SAFEGUARDING OF COVERED CONTRACTOR INFORMATION SYSTEMS (JUN 2016) FAR

252.204-7003 CONTROL OF GOVERNMENT PERSONNEL WORK PRODUCT (APR 1992) DFARS

252.204-7004 ALTERNATE A, SYSTEM FOR AWRD MANAGEMENT (FEB 2014) DFARS

252.204-7009 LIMITATIONS ON THE USE OR DISCLOSURE OF THIRD-PARTY CONTRACTOR REPORTED CYBER INCIDENT

INFORMATION (OCT 2016) DFARS

(a) Definitions. As used in this clause— “Compromise” means disclosure of information to unauthorized persons, or a violation of the security policy of a system, in which unauthorized intentional or unintentional disclosure, modification, destruction, or loss of an object, or the copying of information to unauthorized media may have occurred.

“Controlled technical information” means technical information with military or space application that is subject to controls on the access, use, reproduction, modification, performance, display, release, disclosure, or dissemination. Controlled technical information would meet the criteria, if disseminated, for distribution statements B through F using the criteria set forth in DoD Instruction 5230.24, Distribution Statements on Technical Documents. The term does not include information that is lawfully publicly available without restrictions.

“Covered defense information” means unclassified information that—

(1) Is—

(i) Provided to the contractor by or on behalf of DoD in connection with the performance of the contract; or

(ii) Collected, developed, received, transmitted, used, or stored by or on behalf of the contractor in support of the performance of the contract; and

(2) Falls in any of the following categories:

(i) Controlled technical information.

(ii) Critical information (operations security). Specific facts identified through the Operations Security process about friendly intentions, capabilities, and activities vitally needed by adversaries for them to plan and act effectively so as to guarantee failure or unacceptable consequences for friendly mission accomplishment (part of Operations Security process).

(iii) Export control. Unclassified information concerning certain items, commodities, technology, software, or other information whose export could reasonably be expected to adversely affect the United States national security and nonproliferation objectives. To include dual use items; items identified in export administration regulations, international traffic in arms regulations and munitions list; license applications; and sensitive nuclear technology information.

(iv) Any other information, marked or otherwise identified in the contract, that requires safeguarding or dissemination controls pursuant to and consistent with law, regulations, and Governmentwide policies (e.g., privacy, proprietary business information).

“Cyber incident” means actions taken through the use of computer networks that result in a compromise or an actual or potentially adverse effect on an information system and/or the information residing therein.

(b) Restrictions. The Contractor agrees that the following conditions apply to any information it receives or creates in the performance of this contract that is information obtained from a third-party’s reporting of a cyber incident pursuant to DFARS clause 252.204-7012, Safeguarding Covered Defense Information and Cyber Incident Reporting (or derived from such information obtained under that clause):

(1) The Contractor shall access and use the information only for the purpose of furnishing advice or technical assistance directly to the Government in support of the Government’s activities related to clause 252.204-7012, and shall not be used for any other purpose.

(2) The Contractor shall protect the information against unauthorized release or disclosure.

(3) The Contractor shall ensure that its employees are subject to use and non-disclosure obligations consistent with this clause prior to the employees being provided access to or use of the information.

(4) The third-party contractor that reported the cyber incident is a third-party beneficiary of the non-disclosure agreement between the Government and Contractor, as required by paragraph (b)(3) of this clause.

(5) A breach of these obligations or restrictions may subject the Contractor to—

(i) Criminal, civil, administrative, and contractual actions in law and equity for penalties, damages, and other appropriate remedies by the United States; and

(ii) Civil actions for damages and other appropriate remedies by the third party that reported the cyber incident, as a third party beneficiary of this clause.

(c) Subcontracts. The Contractor shall include this clause, including this paragraph (c), in subcontracts, or similar contractual instruments, for services that include support for the Government’s activities related to safeguarding covered defense information and cyber incident reporting, including subcontracts for commercial items, without alteration, except to identify the parties.

(End of clause)

252.204-7011 ALTERNATIVE LINE ITEM STRUCTURE (SEP 2011) DFARS

252.204-7012 SAFEGUARDING COVERED DEFENSE INFORMATION AND CYBER INCIDENT REPORTING (OCT 2016)

DFARS

(a) Definitions. As used in this clause— “Adequate security” means protective measures that are commensurate with the consequences and probability of loss, misuse, or unauthorized access to, or modification of information.

“Compromise” means disclosure of information to unauthorized persons, or a violation of the security policy of a system, in which unauthorized intentional or unintentional disclosure, modification, destruction, or loss of an object, or the copying of information to unauthorized media may have occurred.

“Contractor attributional/proprietary information” means information that identifies the contractor(s), whether directly or indirectly, by the grouping of information that can be traced back to the contractor(s) (e.g., program description, facility locations), personally identifiable information, as well as trade secrets, commercial or financial information, or other commercially sensitive information that is not customarily shared outside of the company.

“Contractor information system” means an information system belonging to, or operated by or for, the Contractor.

“Controlled technical information” means technical information with military or space application that is subject to controls on the access, use, reproduction, modification, performance, display, release, disclosure, or dissemination. Controlled technical information would meet the criteria, if disseminated, for distribution statements B through F using the criteria set forth in DoD Instruction 5230.24, Distribution Statements on Technical Documents. The term does not include information that is lawfully publicly available without restrictions.

“Covered contractor information system” means an information system that is owned, or operated by or for, a contractor and that processes, stores, or transmits covered defense information.

“Covered defense information” means unclassified information that—

(i) Is—

(A) Provided to the contractor by or on behalf of DoD in connection with the performance of the contract; or

(B) Collected, developed, received, transmitted, used, or stored by or on behalf of the contractor in support of the performance of the contract; and

(ii) Falls in any of the following categories:

(A) Controlled technical information.

(B) Critical information (operations security). Specific facts identified through the Operations Security process about friendly intentions, capabilities, and activities vitally needed by adversaries for them to plan and act effectively so as to guarantee failure or unacceptable consequences for friendly mission accomplishment (part of Operations Security process).

(C) Export control. Unclassified information concerning certain items, commodities, technology, software, or other information whose export could reasonably be expected to adversely affect the United States national security and nonproliferation objectives. To include dual use items; items identified in export administration regulations, international traffic in arms regulations and munitions list; license applications; and sensitive nuclear technology information.

(D) Any other information, marked or otherwise identified in the contract, that requires safeguarding or dissemination controls pursuant to and consistent with law, regulations, and Governmentwide policies (e.g., privacy, proprietary business information).

“Cyber incident” means actions taken through the use of computer networks that result in a compromise or an actual or potentially adverse effect on an information system and/or the information residing therein.

“Forensic analysis” means the practice of gathering, retaining, and analyzing computer-related data for investigative purposes in a manner that maintains the integrity of the data.

“Malicious software” means computer software or firmware intended to perform an unauthorized process that will have adverse impact on the confidentiality, integrity, or availability of an information system. This definition includes a virus, worm, Trojan horse, or other code-based entity that infects a host, as well as spyware and some forms of adware.

“Media” means physical devices or writing surfaces including, but is not limited to, magnetic tapes, optical disks, magnetic disks, large-scale integration memory chips, and printouts onto which information is recorded, stored, or printed within an information system.

‘‘Operationally critical support’’ means supplies or services designated by the Government as critical for airlift, sealift, intermodal transportation services, or logistical support that is essential to the mobilization, deployment, or sustainment of the Armed Forces in a contingency operation.

“Rapid(ly) report(ing)” means within 72 hours of discovery of any cyber incident.

“Technical information” means technical data or computer software, as those terms are defined in the clause at DFARS 252.227-7013, Rights in Technical Data-Non Commercial Items, regardless of whether or not the clause is incorporated in this solicitation or contract. Examples of technical information include research and engineering data, engineering drawings, and associated lists, specifications, standards, process sheets, manuals, technical reports, technical orders, catalog-item identifications, data sets, studies and analyses and related information, and computer software executable code and source code.

(b) Adequate security. The Contractor shall provide adequate security for all covered defense information on all covered contractor information systems that support the performance of work under this contract. To provide adequate security, the Contractor shall—

(1) Implement information systems security protections on all covered contractor information systems including, at a minimum—

(i) For covered contractor information systems that are part of an Information Technology (IT) service or system operated on behalf of the Government—

(A) Cloud computing services shall be subject to the security requirements specified in the clause 252.239-7010, Cloud Computing Services, of this contract; and

(B) Any other such IT service or system (i.e., other than cloud computing) shall be subject to the security requirements specified elsewhere in this contract; or

(ii) For covered contractor information systems that are not part of an IT service or system operated on behalf of the Government and therefore are not subject to the security requirement specified at paragraph (b)(1)(i) of this clause—

(A) The security requirements in National Institute of Standards and Technology (NIST) Special Publication (SP) 800-171, “Protecting Controlled Unclassified Information in Nonfederal Information Systems and Organizations,” http://dx.doi.org/10.6028/NIST.SP.800-171 that is in effect at the time the solicitation is issued or as authorized by the Contracting Officer, as soon as practical, but not later than December 31, 2017. The Contractor shall notify the DoD CIO, via email at osd.dibcsia@mail.mil, within 30 days of contract award, of any security requirements specified by NIST SP 800-171 not implemented at the time of contract award; or

(B) Alternative but equally effective security measures used to compensate for the inability to satisfy a particular requirement and achieve equivalent protection accepted in writing by an authorized representative of the DoD CIO; and

(2) Apply other information systems security measures when the Contractor easonably determines that information systems security measures, in addition to those identified in paragraph (b)(1) of this clause, may be required to provide adequate security in a dynamic environment based on an assessed risk or vulnerability.

(c) Cyber incident reporting requirement.

(1) When the Contractor discovers a cyber incident that affects a covered contractor information system or the covered defense information residing therein, or that affects the contractor’s ability to perform the requirements of the contract that are designated as operationally critical support, the Contractor shall—

(i) Conduct a review for evidence of compromise of covered defense information, including, but not limited to, identifying compromised computers, servers, specific data, and user accounts. This review shall also include analyzing covered contractor information system(s) that were part of the cyber incident, as well as other information systems on the Contractor’s network(s), that may have been accessed as a result of the incident in order to identify compromised covered defense information, or that affect the Contractor’s ability to provide operationally critical support; and

(ii) Rapidly report cyber incidents to DoD at http://dibnet.dod.mil.

(2) Cyber incident report. The cyber incident report shall be treated as information created by or for DoD and shall include, at a minimum, the required elements at http://dibnet.dod.mil.

(3) Medium assurance certificate requirement. In order to report cyber incidents in accordance with this clause, the Contractor or subcontractor shall have or acquire a DoD-approved medium assurance certificate to report cyber incidents. For information on obtaining a DoD-approved medium assurance certificate, see http://iase.disa.mil/pki/eca/Pages/index.aspx.

(d) Malicious software. The Contractor or subcontractors that discover and isolate malicious software in connection with a reported cyber incident shall submit the malicious software in accordance with instructions provided by the Contracting Officer.

(e) Media preservation and protection. When a Contractor discovers a cyber incident has occurred, the Contractor shall preserve and protect images of all known affected information systems identified in paragraph (c)(1)(i) of this clause and all relevant monitoring/packet capture data for at least 90 days from the submission of the cyber incident report to allow DoD to request the media or decline interest.

(f) Access to additional information or equipment necessary for forensic analysis. Upon request by DoD, the Contractor shall provide DoD with access to additional information or equipment that is necessary to conduct a forensic analysis.

(g) Cyber incident damage assessment activities. If DoD elects to conduct a damage assessment, the Contracting Officer will request that the Contractor provide all of the damage assessment information gathered in accordance with paragraph (e) of this clause.

(h) DoD safeguarding and use of contractor attributional/proprietary information. The Government shall protect against the unauthorized use or release of information obtained from the contractor (or derived from information obtained from the contractor) under this clause that includes contractor attributional/proprietary information, including such information submitted in accordance with paragraph (c). To the maximum extent practicable, the Contractor shall identify and mark attributional/proprietary information. In making an authorized release of such information, the Government will implement appropriate procedures to minimize the contractor attributional/proprietary information that is included in such authorized release, seeking to include only that information that is necessary for the authorized purpose(s) for which the information is being released.

(i) Use and release of contractor attributional/proprietary information not created by or for DoD. Information that is obtained from the contractor (or derived from information obtained from the contractor) under this clause that is not created by or for DoD is authorized to be released outside of DoD—

(1) To entities with missions that may be affected by such information;

(2) To entities that may be called upon to assist in the diagnosis, detection, or mitigation of cyber incidents;

(3) To Government entities that conduct counterintelligence or law enforcement investigations;

(4) For national security purposes, including cyber situational awareness and defense purposes (including with Defense Industrial Base (DIB) participants in the program at 32 CFR part 236); or

(5) To a support services contractor (“recipient”) that is directly supporting Government activities under a contract that includes the clause at 252.204-7009, Limitations on the Use or Disclosure of Third-Party Contractor Reported Cyber Incident Information.

(j) Use and release of contractor attributional/proprietary information created by or for DoD. Information that is obtained from the contractor (or derived from information obtained from the contractor) under this clause that is created by or for DoD (including the information submitted pursuant to paragraph (c) of this clause) is authorized to be used and released outside of DoD for purposes and activities authorized by paragraph (i) of this clause, and for any other lawful Government purpose or activity, subject to all applicable statutory, regulatory, and policy based restrictions on the Government’s use and release of such information.

(k) The Contractor shall conduct activities under this clause in accordance with applicable laws and regulations on the interception, monitoring, access, use, and disclosure of electronic communications and data.

(l) Other safeguarding or reporting requirements. The safeguarding and cyber incident reporting required by this clause in no way abrogates the Contractor’s responsibility for other safeguarding or cyber incident reporting pertaining to its unclassified information…