SOW_CURE_AISDeconUnits2022.docx

PMIS # 305234A

Provide Two (2) Trailer Mounted Hot Water Decontamination Pressure Washer units for Vessel Decontamination at Curecanti National Recreation Area

Statement of Work

This contract will provide for the purchase of two (2) trailer mounted Hot Water Decontamination Pressure Washer units at Curecanti National Recreation Area. The total bid for the units shall include all shipping and handling costs to ship the decontamination units to Curecanti NRA, Gunnison CO 81230. Shipping shall not be billed separately and will not be due at the time of delivery. The Park recommends Landa Model PGHW5-35324E with RTR1-W-C-E-200 trailer or similar approved product. Required specifications for the Decontamination Washers and transport trailers are as follows:

PRODUCT SPECIFICATIONS:

Decontamination Unit(s):

· PRESSURE: 3000psi

· FLOW CAPACITY: Minimum of 5.0 GPM

· OUTLET TEMP Adjustable thermostat, able to maintain 120°F & 140°F for long periods w/ maximum of +- 5°F precision discharge water temperature from set temperature regardless of incoming water temperature.

Option: Digital or Dual Thermostat Control

· POWER/ENGINE: Appropriate engine HP to produce specified pressure output, 25 amp charging system for burner and electric key start, & alternative pull start. Power generator with AC Plug-In capable of operating 115V burner

· ENGINE FUEL/CAP: Unleaded, Minimum of 5 Gallon Tank w/ Fuel Level Gauge

· CONTROLS/SWITCHES: Adjustable thermostat, lighted burner control switch, Hour Meter, Battery On/Off Switch, Key switch & Engine choke

· PUMP: Three Piston, Lifetime Warranty, unloader, bypass loop for pump protection

· POWER DRIVE: Belt Drive with belt tensioning system.

· PRESSURE CONTROL: Pressure regulating unloader. Maximum pressure between 3,000 & 3,500 PSI

· WINTERIZATION TANK: 5 gallon reserve tank w/ float, standard garden hose fitting, w/3 way inlet valve (in from float tank, in from water tank or other source, out to pump)

· PRESSURE HOSE: Non-Marking, 50’ x 3/8", double-wire (R2) braid hose, 4000psi or greater, 250 degree rated or better w/ swivel connection at trigger gun.

· GUN/WAND: Pressure sensitive trigger gun w/ 3/8” stainless quick connect for attachments, 48" dual lance variable pressure w/ 3/8” quick connect nozzles

· NOZZLE: Size 6.0 ( three at 40°) white in color

· BURNER COIL: ½” sch. 80 coil, ceramic blanket insulation, emergency shut off, 5 year non-pro rated warranty.

· BURNER/POWER: Diesel or kerosene fired 115V AC, circuit breaker, auto ignition, inline water separator fuel filter, & Flow switch activated. Safety - If ignitor does not ignite fuel will not be delivered to burner.

· BURNER FUEL/CAP: Diesel, Kerosene, Minimum of 8 gallons w/ fuel gauge

· FRAME CONSTRUCTION: Heavy gauge steel, powder coated frame, Stainless panels and coil wrap

· HOSE REEL: Reel should be of sufficient size to easily store hose and have locking capability w/ stainless hardware.

· WATER SUPPLY: 250-gallon minimum polyethylene baffled supply tank w/ garden hose attachment & meet trailer gross vehicle weight.

· ATTACHMENTS: Trigger gun, diffuser, 48" dual lance variable pressure wand with (3) quick coupled nozzles, All attachments should be rated to at least 200 degree Fahrenheit. Attachments should be of stainless construction and rated for appropriate pressure. Inline Thermometer w/ quick connects.

· WARRANTY: Minimum of 1 year and 50 hours parts & labor warranty. All equipment and parts must be new, no refurbished equipment or parts. One year warranty for failure of equipment with normal wear and tear.

Warranty must be serviceable within the state of purchase.

Trailer(s):

· Minimum 4000# capacity, single or double-axle with torsion or leaf spring suspension, fenders with anti-slip coating that can be used as a step and 14” or 15” trailer wheels and radial tires. Frame & Axle Capacity must meet weight specification of water holding capacity previously specified. Must meet DOT Trailer Standards.

· Bed size – 98” Long X 64” wide. Deck covered with diamond tread plate steel. All metal surfaces must be powder coated.

· DOT approved wiring for Electric brake system to hitch & turn signals

· Easily accessible matching spare tire and wheel mounted on bracket

· All trailer lighting must be LED’s and meet or exceed Federal, DOT requirements.

· 2 5/16” Ball Coupler

· Trailer Breakaway System

· Jack stand should be able to withstand weight of unit with water when disconnected from the coupler

· Includes lockable steel storage box approximately 48" W, 16" H, and 12" D

Other:

· Easily accessible mounted fire extinguisher

· Non-flammable, weather resistant cover capable of covering entire unit and providing protection from extreme environmental conditions.

· Layout diagram for all components

· List of Consumable Replacement Parts Must be Provided

· Operation and maintenance manuals must be provided including wiring schematics.

· Safety & Operational Training on Unit at Time of Delivery Shipping and Freight:

· Delivery to Curecanti National Recreation Area (Gunnison CO, 81230) will be included in bids.

· All shipping costs shall be included in total bid.

· No shipping charges will be due at the time of delivery.