SOW bldg 1438 Shelving Unit_649 MUNS_2022.07.28.pdf

SOW Shelving Unit (28 Jul 2022)

SOW Shelving Unit

649th Munitions Squadron

Building 1438

Hill Air Force Base Utah

Contents

1.0. Scope

2.0. Building 1438 Shelving Unit Requirements

3.0. Delivery Services

4.0. Installation Services

5.0. Training Services

1.0. Scope

This project will procure Shelving Unit for building 1438 on Hill Air Force base, Utah.

2.0. Building 1438 Shelving Unit Requirements

2.1. Shelving Unit will have 3 each sections 56” x 27” x 98” with 2 adjustable shelves, 2 pull out drawers and 1 pull out shelf. Bottom row will be rollers to easily pull out boxes of heavy equipment.

2.2. Shelving Unit will have 2 each sections 56” x 27” x 98” with 2 adjustable shelves, 4 pull out drawers and doors cover the whole cabinet.

2.3. Shelving Unit may be up to 6 inches different. Weight capacity much meet 2,000lbs.

2.4 Shelving will measure 286” wide x 27” deep x 98” tall fully built.

2.5. Drawings attached

3.0. Delivery Services

3.1. The contractor will ship the Shelving Unit directly to the customer at:

6260 Hickory Ave Bldg 1621 Hill AFB, UT 84056

For:

649th Munitions Squadron Building 1438 Hill AFB, UT 84056

3.2 Inspection/Acceptance. The Contractor shall only tender for acceptance those items that conform to the requirements of this contract. The Government reserves the right to inspect or test any supplies or services that have been tendered for acceptance. The Government may require repair or replacement of nonconforming supplies or reperformance of nonconforming services at no increase in contract price. If repair/replacement or reperformance will not correct the defects or is not possible, the Government may seek an equitable price reduction or adequate consideration for acceptance of nonconforming supplies or services. The Government must exercise its post‐acceptance rights‐

(1) Within a reasonable time after the defect was discovered or should have been discovered;

and

(2) Before any substantial change occurs in the condition of the item, unless the change is due to the defect in the Item

4.0. Installation Services

4.1. Shelving Unit will be delivered fully to the customer installation not required.

5.0. Training Services

5.1. No in-person training services are required to be provided by the contract.