Sole_Source_JOTFOC.pdf

114 KB Posted

Attached to
SERVOVALVE, HYDRAULIC
Solicitation number
70Z08521Q30112B00
Issued by

View the file

Other files

File Type Posted
FAR CLAUSES.pdf PDF
70Z08521Q30112B00 RFQ.pdf PDF

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file
Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

PROJECT/TASK

NUMBER

CODE

ONE LEVEL ABOVE CONTRACTING OFFICER TELEPHONE NUMBER DATE

SIMPLIFIED ACQUISITION PROCEDURES (SAP)

JUSTIFICATION FOR OTHER THAN FULL AND OPEN COMPETITION (J&A)

SOLICITATIONS MAY BE LIMITED TO ONE SOURCE ONLY IF THE CONTRACTING OFFICER DETERMINES THAT ONLY ONE SOURCE IS REASONABLY AVAILABILE. THIS DETERMINATION MUST BE SUPPORTED WITH FULL JUSTIFICATION FOR SOLE SOURCE FROM CUSTOMER. WHEN THE CUSTOMER DESCRIBES AN ITEM WITH A PURCHASE DESCRIPTION WHICH LIMITS THE AVAILABILITY TO ONE SOURCE, THE JUSTIFICATION MUST EXPLAIN WHY THE ITEM IS THE ONLY ONE THAT WILL MEET THE GOVERNMENT’S REQUIREMENT. STATEMENTS SUCH AS “ONLY KNOWN SOURCE” OR “ONLY SOURCE WHICH CAN MEET THE REQUIRED DELIVERY DATE” ARE INADEQUATE TO SUPPORT A SOLE SOURCE PURCHASE. THE CUSTOMER SHALL PROVIDE THE FOLLOWING INFORMATION:

PURCHASE REQUEST OR REQUISTION NUMBER ESTIMATED AMOUNT (OVER $3,000 BUT NOT EXCEEDING $150,000)

BRIEF DESCRIPTION OF SUPPLIES OR SERVICES REQUIRED, AND THE INTENDED USE

UNIQUE CHARACTERISTICS THAT LIMIT AVAILABILITY TO ONLY ONE SOURCE, WITH THE REASON NO OTHER SUPPLIES OR SERVICES CAN BE USED.

REASON THAT SUGGESTED SOURCE IS THE ONLY SOURCE WHICH CAN PROVIDE THE SUPPLIES OR SERVICES

EXPLAIN WHY AN ADEQUATE PURCHASE DESCRIPTION OR OTHER INFORMATION SUITABLE TO SOLICIT BY FULL AND OPEN COMPETITION HAS NOT BEEN

DEVELOPED OR ARE NOT AVAILABLE

PROVIDE A STATEMENT OF ACTIONS, IF ANY, THE GOVERNMENT MAY TAKE TO REMOVE OR OVERCOME ANY BARRIERS TO COMPETITION BEFORE FUTURE

ACQUISITIONS ARE REQUIRED

SIGNATURE AND TITLE OF CUSTOMER

TELEPHONE NUMBER

DATE

SIGNATURE OF CONTRACTING OFFICER TELEPHONE NUMBER DATE

Sheet1

SOLICITATIONS MAY BE LIMITED TO ONE SOURCE ONLY IF THE CONTRACTING OFFICER DETERMINES THAT ONLY ONE SOURCE IS REASONABLY AVAILABILE THIS DETERMINATION MUST BE SUPPORTED WITH FULL JUSTIFICATION FOR SOLE SOURCE FROM CUSTOMER WHEN THE CUSTOMER DESCRIBES AN ITEM WITH A PURCHASE DESCRIPTION WHICH LIMITS THE AVAILABILITY TO ONE SOURCE THE JUSTIFICATION MUST EXPLAIN WHY THE ITEM IS THE ONLY ONE THAT WILL MEET THE GOVERNMENTS REQUIREMENT STATEMENTS SUCH AS ONLY KNOWN SOURCE OR ONLY SOURCE WHICH CAN MEET THE REQUIRED DELIVERY DATE ARE INADEQUATE TO SUPPORT A SOLE SOURCE PURCHASE THE CUSTOMER SHALL PROVIDE THE FOLLOWING INFORMATION:
PURCHASE REQUEST OR REQUISTION NUMBER: 2121409B4500AB057
PROJECTTASK NUMBER:
ESTIMATED AMOUNT OVER 3000 BUT NOT EXCEEDING 150000:
BRIEF DESCRIPTION OF SUPPLIES OR SERVICES REQUIRED AND THE INTENDED USE: Purchase of Servovalve, P/N: 6816188, NSN: 4820-01-598-8881; Servovalve, P/N: 6816189, NSN: 4810-01-F12-2914;

Servovalve, P/N: 6816190, NSN: 4820-01-598-9583

OEM: RENK SYSTEMS CORPORATION CAGE: D9434

Used on USCGC 418 FT WMSL PORT REDUCTION GEAR.

UNIQUE CHARACTERISTICS THAT LIMIT AVAILABILITY TO ONLY ONE SOURCE WITH THE REASON NO OTHER SUPPLIES OR SERVICES CAN BE USED: These parts are apart of the USCGC 418 FT WMSL PORT REDUCTION GEAR which is a critical control system for safe operation, machinery operating parameters, environmental regulations & assets longevity for the WMSL-418 class cutters. Breakdown of this system or its components will lead to major damage or unsafe operation of the cutter. The CG does not possess technical design data, tolerances, and other information needed to evaluate alternate parts for other sources.
REASON THAT SUGGESTED SOURCE IS THE ONLY SOURCE WHICH CAN PROVIDE THE SUPPLIES OR SERVICES: The Coast Guard did not purchase the manufacturer's proprietary data rights, and therefore, cannot determine

with certainty that an alternative part number would mount to, interface with, or operate effectively with Coast Guard Cutters. Failure of an alternative part, not conforming to the OEM's specifications, could cause damage to the cutters. The manufacturing drawing and specifications have not been purchased by the Coast Guard.

EXPLAIN WHY AN ADEQUATE PURCHASE DESCRIPTION OR OTHER INFORMATION SUITABLE TO SOLICIT BY FULL AND OPEN COMPETITION HAS NOT BEEN DEVELOPED OR ARE NOT AVAILABLE: This acquisition must be made using sole source parts, assemblies, and vendor. The applicable statutory authority applicable is 10 USC 2304(c) (1) because the OEM is the only known source that possesses the required capabilities, drawings, specifications, engineering control procedures and proprietary methods to ensure the latest design configuration, manufacturing and quality control required to produce parts to the latest engineering specifications and requirements. The Coast Guard does not posses or own the technical data required to solicit these parts from a source other than the OEM or an OEM distributor.
PROVIDE A STATEMENT OF ACTIONS IF ANY THE GOVERNMENT MAY TAKE TO REMOVE OR OVERCOME ANY BARRIERS TO COMPETITION BEFORE FUTURE ACQUISITIONS ARE REQUIRED: COR will continue to conduct market research with a focus on locating vendors that are able to meet requirements, however without technical data described above obtaining full and open competition will be difficult. The Coast Guard cannot require any vendor to release proprietary information.
SIGNATURE AND TITLE OF CUSTOMER:
CODE:
TELEPHONE NUMBER:
DATE:
SIGNATURE OF CONTRACTING OFFICER:
CODE_2:
TELEPHONE NUMBER_2:
DATE_2:
ONE LEVEL ABOUT CONTRACTING OFFICER:
CODE_3:
TELEPHONE NUMBER_3:
DATE_3:

File details come from the government source that posted it. Updated .