SF1449_SPE1C122R0081.PDF

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL ITEMS

OFFEROR TO COMPLETE BLOCKS 12, 17, 23, 24, & 30 1000140314

1. REQUISITION NUMBER

2. CONTRACT NO. 3. AWARD/EFFECTIVE

DATE

4. ORDER NUMBER

SPE1C1-22-R-0081

5. SOLICITATION NUMBER

2022 MAY 06

6. SOLICITATION ISSUE

DATE

Megan Wherrity PCPQCBC

a. NAME

Phone: 215-737-5603

b. TELEPHONE NUMBER (No Collect calls)

2022 JUN 07

8. OFFER DUE DATE/

LOCAL TIME

9. ISSUED BY CODE SPE1C1

DLA TROOP SUPPORT

C AND T SUPPLY CHAIN

700 ROBBINS AVENUE

PHILADELPHIA PA 19111-5096

USA

10. THIS ACQUISITION IS 100UNRESTRICTED OR SET ASIDE: % FOR:

SMALL BUSINESS

HUBZONE SMALL

BUSINESS

WOMEN-OWNED SMALL BUSINESS

(WOSB) ELIGIBLE UNDER THE WOMEN-OWNED

SMALL BUSINESS PROGRAM

8 (A)

SERVICE-DISABLED

VETERAN-OWNED

SMALL BUSINESS

315220NAICS:

SIZE STANDARD:

11. DELIVERYFOR FOB DESTINA-

TION UNLESS BLOCK IS

MARKED

12. DISCOUNT TERMS

13a. THIS CONTRACT IS A

RATED ORDER UNDER

DPAS (15 CFR 700)

13b. RATING

14. METHOD OF SOLICITATION

RFQ IFB RFP

15. DELIVER TO CODE 16. ADMINISTERED BY CODE

17a. CONTRACTOR/ CODE

OFFEROR

FACILITY

CODE

TELEPHONE NO.

18a. PAYMENT WILL BE MADE BY CODE

17b. CHECK IF REMITTANCE IS DIFFERENT AND PUT SUCH ADDRESS IN

OFFER

18b. SUBMIT INVOICES TO ADDRESS SHOWN IN BLOCK 18a UNLESS BLOCK

BELOW IS CHECKED

19.

ITEM NO.

20.

SCHEDULE OF SUPPLIES/SERVICES

21.

QUANTITY

22.

UNIT

23.

UNIT PRICE

24.

AMOUNT

See Schedule

(Use Reverse and/or Attach Additional Sheets as Necessary)

25. ACCOUNTING AND APPROPRIATION DATA 26. TOTAL AWARD AMOUNT (For Govt. Use Only)

27a. SOLICITATION INCORPORATES BY REFERENCE FAR 52.212-1, 52.212-4. FAR 52.212-3 AND 52.212-5 ARE ATTACHED. ADDENDA ARE ARE NOT ATTACHED

27b. CONTRACT/PURCHASE ORDER INCORPORATES BY REFERENCE FAR 52.212-4. FAR 52.212-5 IS ATTACHED. ADDENDA ARE ARE NOT ATTACHED

28. CONTRACTOR IS REQUIRED TO SIGN THIS DOCUMENT AND RETURN

COPIES TO ISSUING OFFICE. CONTRACTOR AGREES TO FURNISH AND

DELIVER ALL ITEMS SET FORTH OR OTHERWISE IDENTIFIED ABOVE AND ON ANY

ADDITIONAL SHEETS SUBJECT TO THE TERMS AND CONDITIONS SPECIFIED

29. AWARD OF CONTRACT: REF. OFFER

DATED . YOUR OFFER ON SOLICITATION

(BLOCK 5), INCLUDING ANY ADDITIONS OR CHANGES WHICH ARE

SET FORTH HEREIN, IS ACCEPTED AS TO ITEMS:

30a. SIGNATURE OF OFFEROR/CONTRACTOR 31a. UNITED STATES OF AMERICA (SIGNATURE OF CONTRACTING OFFICER)

30b. NAME AND TITLE OF SIGNER (Type or Print) 30c. DATE SIGNED 31b. NAME OF CONTRACTING OFFICER (Type or Print) 31c. DATE SIGNED

SEE SCHEDULE

7. FOR SOLICITATION

INFORMATION CALL:

SEE SCHEDULE

03:00 PM

STANDARD FORM 1449 (REV. 2/2012)

Prescribed by GSA - FAR (48 CFR) 53.212

AUTHORIZED FOR LOCAL REPRODUCTION

PREVIOUS EDITION IS NOT USABLE

SEE ADDENDUM

EDWOSB

32a. QUANTITY IN COLUMN 21 HAS BEEN

ACCEPTED, AND CONFORMS TO THE CONTRACT, EXCEPT AS NOTED:RECEIVED INSPECTED

COMPLETE PARTIAL FINAL

STANDARD FORM 1449 (REV. 2/2012) BACK

36. PAYMENT

PARTIAL FINAL

20.

SCHEDULE OF SUPPLIES/SERVICES

21.

QUANTITY

22.

UNIT

23.

UNIT PRICE

24.

AMOUNT

19.

ITEM NO.

32b. SIGNATURE OF AUTHORIZED GOVERNMENT

REPRESENTATIVE

32c. DATE 32d. PRINTED NAME AND TITLE OF AUTHORIZED GOVERNMENT

REPRESENTATIVE

32f. TELEPHONE NUMBER OF AUTHORIZED GOVERNMENT REPRESENTATIVE

32g. E-MAIL OF AUTHORIZED GOVERNMENT REPRESENTATIVE

33. SHIP NUMBER 34. VOUCHER NUMBER 35. AMOUNT VERIFIED

CORRECT FOR

37. CHECK NUMBER

38. S/R ACCOUNT NO. 39. S/R VOUCHER NUMBER 40. PAID BY

42a. RECEIVED BY (Print)

41b. SIGNATURE AND TITLE OF CERTIFYING OFFICER 41c. DATE

42c. DATE REC'D (YY/MM/DD) 42d. TOTAL CONTAINERS

41a. I CERTIFY THIS ACCOUNT IS CORRECT AND PROPER FOR PAYMENT

32e. MAILING ADDRESS OF AUTHORIZED GOVERNMENT REPRESENTATIVE

42b. RECEIVED AT (Location)

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 3 OF 67 PAGES

CONTINUED ON NEXT PAGE

SPE1C1-22-R-0081

SECTION A - SOLICITATION/CONTRACT FORM

TECHNICAL REQUIREMENTS

THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN `R' OR AN `I' NUMBER IN SECTION B) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE

WEB AT:

http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx. FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-

ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.

Prices will be evaluated based on the Annual Order Limitation Quantity (AOLQ) listed in Schedule of Supplies Section of this solicitation.

Offerors are required to submit one PDM for each item listed under "INSTRUCTIONS FOR SUBMITTING PRODUCT DEMONSTRATION MODEL (PDM) (1)(a)" and past performance information from the period three (3) years prior to the solicitation closing date.

The contract will contain a 60-month period, with five separate twelve month price tiers. Failure to offer on all Tiers will result in rejection of the offeror's entire proposal.

The Government intends to evaluate proposals and award a contract without discussions with offerors. Therefore, the offeror's initial proposal should contain the offeror's best terms from a cost or price and technical standpoint. The Government reserves the right to conduct discussions if the Contracting Officer later determines them to be necessary.

PRODUCTION DEMONSTRATION MODEL - CAUTION NOTICE

IT IS ESSENTIAL THAT ALL OFFERORS READ AND UNDERSTAND THIS NOTICE:

This solicitation requires submission of Product Demonstration Models (PDM) at time of closing as specified in this document. This solicitation will permit only an initial submission of the PDM with the offeror's proposal at the time and date of initial closing of the solicitation; offerors will not be given the opportunity to present subsequent submissions to correct deficiencies noted in the Government's evaluation of initial PDMs. Therefore, it is imperative that offerors put forth their best effort in constructing this PDM. Any correction to the PDM will not be permitted and will not be accepted by the Government.

FAILURE TO SUBMIT A PDM WILL CAUSE THE OFFEROR'S ENTIRE PROPOSAL TO BE REJECTED.

NOTICE TO PROSPECTIVE SUPPLIERS ON USE OF SUPPLIER PERFROMANCE RISK SYSTEM IN PAST

PERFORMANCE EVALUATIONS

The Supplier Performance Risk System (SPRS) application (https://www.sprs.csd.disa.mil/) will be used in the evaluation of suppliers' past performance. Reference provision language elsewhere in this solicitation.

“THE GOVERNMENT WILL RESERVE THE RIGHT TO CONSIDER PAST PERFORMANCE INFORMATION THAT

OCCURS FOLLOWING THE CLOSING OF THE SOLICITATION AS WELL”.

CAUTION NOTICE - TWO PHASE TECHNICAL / PRICE EVALUATION

The Government anticipates that numerous offerors will submit proposals on solicitation. In the event that eight or more proposals are received, the Government may use a two-phase evaluation process, which allows the Contracting Officer to conduct a preliminary evaluation of all offers, in order to determine which offers are the least likely to be candidates for further consideration. During this preliminary https://www.sprs.csd.disa.mil/

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 4 OF 67 PAGES

SPE1C1-22-R-0081

SECTION A - SOLICITATION/CONTRACT FORM (CONTINUED)

evaluation, all offerors' Product Demonstration Models (PDMs) and proposed prices will be evaluated. Certain offerors may be excluded from further consideration at this point, if their PDM ratings and/or offered prices are not competitive when compared with PDM ratings and prices proposed by other offerors. The remaining offers will then be evaluated for the remaining technical evaluation factors. After the completion of this review, the Contracting Officer will determine whether to establish a competitive range and enter into negotiations, or to award without discussions.

LATE BIDS

It is the Offerors responsibility to ensure that offers reach the Government office designated in the solicitation on time.

It is also the responsibility of the Offeror to address and mark offers as specified in FAR 52.212-1(b) - INSTRUCTIONS TO

OFFERORS -- COMMERCIAL ITEMS (JUN 2020)

CAUTION: Facsimile offers are not authorized for this solicitation.

NON-GOVERNMENT FURNISHED MATERIAL (GFM)

The Government has recently changed its procedures regarding Government Furnished Material (GFM). GFM will no longer be provided to Contractors that are awarded contracts for end item dress clothing contracts. The Government will still make available to the Contractor, for use in connection with and under the terms of this contract, the material set forth below, and the Contractor shall utilize such materials in the furnishing of supplies hereunder. All other types of materials required in the performance of this contract shall be furnished by the Contractor.

Type of Material: Cloth, Green, P/W Type II

NSN: 8305-01-247-6550

Current Cost of Government Issued Material per Yard: $18.77

Refer to Pricing:

Tier 1: $18.77; Tier 2:: $19.15; Tier 3: $19.53; Tier 4: $19.92; Tier 5: $20.32

It is now the responsibility of the Contractor to purchase the material listed above from DLA Troop Support as needed. The Government shall be the sole source of the supply of the materials listed above and only such material obtained from the Government under this contract may be used in the performance of this contract.

PRICING

The material will be priced at the current DLA Troop Support contract price for the material being purchased with an additional 2% inflation added on for each pricing tier. The material price will be listed in the solicitation and the Contractor is required to submit pricing inclusive of the material price (CMT + Material price). The Contractor can purchase any amount of cloth desired that does not exceed 2% of the total yardage required to produce the item based on the Government BOM. In order not to affect planning and the purchase of cloth by the Government, unlimited quantities of cloth cannot be sold to the Contractor. In the event that the Contractor would like material in excessive quantities, defined as purchasing more than 2% of the total unit allowance determined by the Government BOM for that delivery order, the Contractor may submit a request for the excess material. Depending on fabric inventory levels, the Contracting Officer may, at his or her discretion, approve the request for some or all of the excessive quantities.

PAYMENT

Upon the delivery of end items, the Contractor will be paid the agreed upon unit price for the contract. It is the responsibility of the Contractor to pay the balance owed to the Government for the material as end items are shipped and payments are received. The Contractor will receive a bill from DFAS for the amount of the cloth purchased that will outline the procedures for payment. A copy of the bill must be submitted with every payment. The Contractor will only receive one bill and must make copies of it if incremental payments will be made. This ensures there is a copy of the bill linking every incremental payment made. The balance due for the purchase of the cloth must be paid within 180 days after the date of the bill for the purchase of the material. In the case that delivery schedules have been extended, the Government may extend the payment terms beyond 180 days. The Contractor will have a continuing balance owed to the Government for the material until end items are shipped and payments are received by the Contractor and made to the Government. In the case that a Contractor makes a late payment or no payment at all, a standard rate of interest will be charged to the Contractor's account which is determined by DFAS. Failure to make payment may also impact the placement of future delivery orders on this contract and will be considered as a part of any future assessment of past performance. Final payment on this contract will be withheld until all material is paid for. Note that once the

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 5 OF 67 PAGES

SPE1C1-22-R-0081

SECTION A - SOLICITATION/CONTRACT FORM (CONTINUED)

sale is made for the cloth, the Contractor assumes all responsibility for the cloth including care and safety.

CONTRACTOR REQUEST FOR MATERIAL

The Contractor shall submit a properly executed DLA Troop Support Form, Prime Contractor's Request for the Purchase of Material, to the Contract Specialist. The procedure for requesting material has not changed. It is the responsibility of the Contractor to request the material in sufficient time to comply with the delivery schedule of the contract. The Government reserves the right to ship partial orders of material depending on the current available stock. The Contractor is not required to purchase the entire amount of material at one time that is required to complete the delivery order. The Contractor may purchase the entire amount of material required to complete the delivery at one time and schedule partial shipments for later dates. If the cloth required to complete a delivery order is purchased all at once, payment is due 180 days after the date of the sale. If smaller increments are purchased, payment is due 180 days from each incremental sale. The Government will not purchase extra fabric leftover after the end of a contract.

PROCEDURES

1. All concerns regarding material should be directed to the Contracting Officer by letter or email within 30 days of the purchase of the cloth.

The Contracting Officer will respond within three business days of receipt. The Contractor must notify the QAR and Contracting Officer within the timeframes listed above when there is an issue regarding quality of the material. Ultimately, it is the Contracting Officer's decision to determine a solution.

2. The Government reserves the right to furnish cloth on rolls or folded. Unless sponged, rolls should contain approximately 100 yards of fabric at approximately 60" width. The Government may furnish material in widths other than those specified. Regardless of widths furnished, the material shall not be deemed deficient or defective when the width furnished differs from the specified width by less than plus or minus 2 inches. If more than plus or minus 2 inches, the Contractor shall be entitled to an equitable adjustment.

3. Material furnished shall be charged to the Contractor's account in multiples of one yard. Where material furnished contains fractions of a yard, the yardage shall be rounded to the whole yard. Fractions of less than one-half yard will be rounded to the next lower full yard; fractions of one-half yard or more will be rounded to the next higher full yard.

4. The Government reserves the right to provide not more than 10% of the material in short pieces. The Contractor shall cut and use short pieces furnished and/or generated and not retain them for return to the Government.

5. For the determination of defective material for excessive visual defects, the Contractor's examination of the material shall be in strict accordance with the quality assurance provisions for the fabric, including random sampling procedures and, as applicable, federal standard (FED-STD) 4 or military standard (MIL-STD) 655 and the applicable Sears slub (i.e. knot in yarn) and knot gauges.

The Contractor shall inspect fabric as it is opened and shall set aside higher point count (metric for assessing fabric defects) rolls for return as either "excess" or "defective" goods. Over-point count fabric set aside prior to cutting by the Contractor shall be returned to the shipment in question prior to random sampling. Upon completion of the examination, the Contractor shall immediately provide the Quality Assurance Representative (QAR) with a written notification of the alleged deficiencies, including the findings of its own examination of the material using a cloth perch (machine which allows unrolling/rerolling of fabric to search for defects). As a minimum, the Contractor shall provide the following data:

(A) Type of material

(B) Nature of nonconformance (including examination report of alleged defective point count)

(C) Number of rolls or pieces in shipment

(D) Name of manufacturer of material

(E) Contract number(s) of material

(F) Lot identification of material

(G) Total number of yards in shipment

(H) Acceptable quality limits (or acceptable quality level (AQL), if applicable)

(I) Number of rolls or yardage in sample

(J) Acceptance number

(K) Recommended disposition

The Contractor shall provide the QAR access to a cloth perch, which the QAR will use to examine the material in question. The QAR shall verify the damage, defect, shortage, narrow width, or discrepancy as documented in the Contractor's notification, and will report the findings of the verification to the Contracting Officer. If the Contractor fails to notify either the Government QAR or the Contracting Officer within 5 days of discovery of any damage, defect, shortage, narrow width or discrepancy in the Government material, no equitable adjustment will be

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 6 OF 67 PAGES

SPE1C1-22-R-0081

SECTION A - SOLICITATION/CONTRACT FORM (CONTINUED)

made in the delivery or performance dates or the contract price.

The Contractor shall not cut or use such material, or in the event the damage, defect, shortage, narrow width or discrepancy is such that it could not reasonably have been discovered until after cutting or further processing, the Contractor shall not further process such material pending instructions from the Contracting Officer. If replacement is to be made, the Government shall provide replacement at its own expense, including transportation costs. When the return of the material is authorized, the Contractor will ship it and include a copy of the Contractor's notification of deficiencies (including examination report) and the QAR's deficiency verification.

6. In cases of Government delay, failure to furnish the requested material, the Government has furnished damaged, defective, short, narrow width, or other discrepancies in the material, the Contracting Officer, upon written request of the Contractor, shall equitably adjust the delivery or performance date and any other contractual provisions effected thereby, in accordance with Federal Acquisition Regulation (FAR) clause 52.243-1, Changes--Fixed-Price. If the Contractor does not request such an adjustment 30 days of the purchase of the cloth, no adjustment will be made. Under no circumstances shall the Government include as an element of any adjustment under this clause any amount for loss of prospective profits.

7. The length marked on the piece tickets of cloth made available as material reflects the measurement metered during preparation for delivery of the cloth, using mechanical measuring devices. An inherent disparity exists between these measurements and cutting table measurements, because the latter are subject to many variables that cannot be controlled. Accordingly, claims for shortages based on cutting table measurements will be considered for allowance only when the shortage on an individual piece exceeds 3-1/2% of the length marked on the piece ticket. All other claims for shortages shall be based on measurements using a mechanical measuring device (calibrated in accordance with the current edition of military standard (MIL-STD) 45662, Calibration System requirements) activated positively by direct contact, with the fabric in continuous motion. These measurements can be determined by using such devices as true meter, length counter on cloth perch, or similar devices.

SHIPPING ARRANGEMENTS

1. The Contractor shall be solely responsible for making transportation arrangements for the pickup and delivery of this material, using its own truck, or a leased or rental carrier. These arrangements shall be specified by the Contractor on the DLA Troop Support Form, Prime Contractor's Request for the Purchase of Material. The Government material will be available for pickup not later than 21 calendar days after receipt of the original DLA Troop Support Form, Prime Contractor's Request for the Purchase of Material.

2. Prior to pick-up, the Contractor shall contact the storage location to coordinate the exact date for pickup and provide the name of the motor carrier to be used. If such pickup is not made within 10 calendar days after the availability date, or the actual date the material becomes available, whichever date is later, the Government reserves the right to return the material to storage, unless a revised date for its pickup has been requested by the Contractor. If the material has to be returned to storage, the Government will not be liable for any additional expense, delay, or loss incurred by the Contractor as a result of missing a scheduled shipment.

3. Shipping of the material from the Government to the Contractor shall be F.O.B. Origin with all material picked up at the location specified and made available at the shipping platform. Loading into the vehicle will be the responsibility of the Contractor or its representative.

Delivery of the material shall be deemed to be accomplished when the material has been picked up and loaded into the vehicle by the Contractor, or its authorized representative. Title to and risk of loss of or damage to the material shall pass to the Contractor upon delivery.

Note: The BOM is included for reference only. The government has the right to revise the BOM at any time.

BERRY AMENDMENT COMPLIANCE

Offerors are cautioned that all components must be of domestic origin in compliance with DFARS clause 252.225-7012, Preference for Certain Domestic Commodities (DEC 2017).

Section 833 of the National Defense Authorization Act for Fiscal Year 2007 added language to 10 U.S.C. 2533a requiring that all articles or items of "clothing", including the materials and components thereof, purchased by the Department of Defense be grown, reprocessed, reused, or produced in the United States, other than sensors, electronics, or other items added to, and not normally associated with, clothing (and the materials and components thereof).

Very Important: The vendor must certify their agreement to these terms and conditions of the solicitation by signing and dating the certification located below.

SECTION 833 NATIONAL DEFENSE AUTHORIZATION ACT CERTIFICATION

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 7 OF 67 PAGES

SECTION A - SOLICITATION/CONTRACT FORM (CONTINUED)

I, (name) _____________________________ do hereby certify by signature below that all articles or items of “clothing,” including the materials and components thereof, being offered for sale to the Department of Defense have been grown, reprocessed, reused, or produced in the United States, other than sensor, electronics, or other items added to, and not normally associated with, clothing (and the materials and components thereof).

_____________________________________ (signature).

SYSTEM FOR AWARD MANAGEMENT (SAM)

The System for Award Management (SAM) is combining federal procurement systems and the Catalog of Federal Domestic Assistance into one new system. This consolidation is being done in phases. The first phase of SAM includes the functionality from the following systems:

* Central Contractor Registry (CCR)

* Federal Agency Registration (Fedreg)

* Online Representations and Certifications Application

* Excluded Parties List System (EPLS)

All Contractors must register on the SAM website: https://www.sam.gov/portal/public/SAM/ in order to be considered for award.

Offerors are reminded to complete all applicable representations and certifications appearing in this solicitation. Failure to complete all representations and certifications may result in the offer being removed from award consideration for failure to comply with all terms and conditions of the solicitation.

RFID NOTICE TO DLA SUPPLIERS: RFID TAGS

This solicitation contains DFARS clause 252.211-7006, PASSIVE RADIO FREQUENCY IDENTIFICATION. This clause requires the successful awardee(s) to affix passive RFID tags at the case and palletized unit load levels. The successful awardee(s) is also required to electronically submit advance shipment notices to DoD to permit association of the passive RFID tag data with the corresponding shipment.

Advance shipment notice. The Contractor shall use Wide Area Work Flow (WAWF), as required by DFARS 252.232-7003, Electronic Submission of Payment Requests, to electronically submit advance shipment notice(s) with the RFID tag ID(s) (specified in paragraph (d) of this clause) in advance of the shipment in accordance with the procedures at https://piee.eb.mil.

Procurement Technical Assistance Centers (PTACS) are available to deliver passive RFID assistance to DoD suppliers. See http://www.dla.

mil/db/procurem.html to identify your local PTAC and obtain information on upcoming workshops and other training/outreach services.

NOTE: Tagging is also required at the item level.

An RFID inlay shall be added to the barcode paper hang tag attached to item 0001.

Cost of implementing the item level RFID tagging must be included in the offered price.

RFID HANGTAG:

An RFID inlay shall be added to the barcode paper hang tag attached to each item. Where the use of self-adhesive bar-code labels are authorized, the RFID inlay may be added to the self-adhesive label in lieu of a paper hang tag. All other contract barcode and hang tag requirements still apply.

The RFID inlay should be passive Gen2 with a frequency range between 860 and 960 MHz. The RFID antenna should be Avery/Dennison AD222 or comparable with ISO/IEC 18000-C EPC global C1G2 Protocol and an EPC memory allocation containing a 96 bit EPC Number.

The data linking the EPC number to the NSN and quantity unit pack must be exportable to VIM/ASAP. The bar code of the EPC Number must be printed at the bottom of the tag along with the human readable version below the bar code.

In addition to defects applicable to the paper tag and barcoding element, the RFID tag shall be examined for the defects listed below:

RFID Inlay omitted https://www.sam.gov/portal/public/SAM/

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 8 OF 67 PAGES

SPE1C1-22-R-0081

SECTION A - SOLICITATION/CONTRACT FORM (CONTINUED)

RFID Inlay not secure RFID Inlay not readable with RFID scanner RFID Inlay or configuration not as specified

The manual document “Item-Level Passive RFID Technology Manufacturer's Information Guide" provides guidance and is available from the Contracting Officer and as an attachment.

ELECTRONIC INVOICING AND ADVANCED SHIPMENT NOTIFICATIONS (ASN)

The Directorate of Clothing and Textiles (C&T) requires electronic invoicing on all contracts unless another method is mutually agreed to by the Contractor, the Contracting Officer, the contract administration office, and the payment office.

Utilization of Wide Area Workflow - Receipts and Acceptance (WAWF-RA) in conjunction with DFARS 252.232-7003, ELECTRONIC

SUBMISSION OF PAYMENT REQUESTS AND RECEIVING REPORTS.

The Directorate of Clothing and Textiles utilizes DLA Virtual Item Manager ARN Supply-Chain Automated Processing (VIM-ASAP), to transmit data to WAWF-RA. VIM-ASAP is the only authorized method to electronically process requests for payment to WAWF-RA for the Directorate of Clothing and Textiles. VIM-ASAP will give you visibility of contract information, track production status and print labels.

VIM-ASAP pre-populates contract data on your invoices, such as unit price, contract numbers, item numbers, addresses, and many other fields that will save you labor and time.

Advanced Shipment Notifications (ASNs) associated with DFARS clause 252.211-7006, PASSIVE RADIO FREQUENCY IDENTIFICATION (MAR 2018) are sent via VIM-ASAP to WAWF-RA processes. Please contact the VIM-ASAP help desk at 888-940-7348 to get started today!

STOP SHIPMENT DELAYS AND REJECTIONS!

For deliveries to New Cumberland depot or the 3PL-Third Part Logistics locations, ensure your Government or Commercial Bills of Lading are correctly annotated with the following information in the description of articles:

* Carrier Name

* Number of Pallets

* Vendor Name

* Contract Number

* Delivery Order Number

* Shipment Number

Notes: (1) Only LVI and Travis require deliveries to be scheduled by appointment. For the other 3PLs, advance notice is recommended but not required.

(2) 3PL warehouses are closed on Federal Holidays.

If a carrier is unable to make a delivery appointment on time or needs to reschedule, the carrier should contact the “Schedule Deliveries” phone numbers below to inform the 3PL and make other arrangements.

DoDAAC: SD0131 RIC: VSTZ

Name and Delivery Address: Travis Association For The Blind

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 9 OF 67 PAGES

SPE1C1-22-R-0081

SECTION A - SOLICITATION/CONTRACT FORM (CONTINUED)

AF & MC 3PL -Distribution Services

4512 South Pleasant Valley Road

Austin, Texas 78744

Supports: Air Force and Marine Corps Recruit (Bag) Items and Organizational Clothing and Individual Equipment (OCIE) Items to the Southwest Region (All Services)

Receiving Hours: 7:00AM - 2:00PM

Schedule Deliveries: 512-647-4700; email: deliveryappointment@austinlighthouse.org

C&T POC: Marcus Hawkins, 512-647-4675

Do not let the following common invoicing errors delay your payments any longer:

Missing or Erroneous Contract Number Missing Call/Delivery Order Number Missing or Erroneous Shipment Number Failure to Mark DD250 as an Original Invoice Failure to Distribute a Copy of the DD250 to the Contract Administration Office Terminal Contract Line Item Number (CLIN) is Omitted, Incorrect or Does Not Match that Appearing in the Contract Missing or Erroneous Unit of Issue Quantity and Price are Incorrect Wrong Pay Office on Invoice

Here are three things you can do to speed your invoice payments:

Be sure your original invoice is properly completed and legible.

Submit your invoices electronically using the Web Invoicing System (WInS). It's fast, accurate, and costs you nothing! Learn more at the WInS Home Page, at: https://www.ecweb.dfas.mil/notes/ , and start using WInS with your next invoice! Or

If you currently receive delivery orders electronically, you could benefit by using an 810- invoice transaction.

Web Invoicing eliminates postage, snail mail, and much paperwork, and gets the invoice/voucher into the DFAS system usually within 24 hours. Web Invoicing is free to vendors doing business with the Government. You just enter the appropriate information and send your invoice to DFAS electronically. It provides help text and pull-down menus in many fields. For more specific questions, contact Janice Hockman (703) 607-5111, Kirsten Larco (703) 607-4920 or Debra Jones (703) 607-2082.

For questions about sending Electronic Data Interchange invoices (810-invoice transactions), contact Mr. Bud Wellens at (215) 737-2778.

For questions about paper invoice preparation, just call the DFAS Customer Service Resource Center at 1-800 756-4571, or Call DLA Troop Support DFAS liaisons listed below for assistance: Camille Conaway (215) 737-4406.

Check out these resources:

http://www.dfas.mil/money/vendor the DFAS Contract Payment Booklet… an excellent desk reference for contractor Accounts Receivable personnel, as well as the status of outstanding invoices.

http://www.dfas.mil/ information regarding bill paying process and additional points of contact. http://www.dfas.mil/ecommerce/myInvoice/ gettingstarted.html....myInvoice is an interactive web application developed specifically for contractors/vendors and government/military employees to obtain invoice status. It is available 24/7.

mailto:deliveryappointment@austinlighthouse.org

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 10 OF 67 PAGES

SPE1C1-22-R-0081

SECTION A - SOLICITATION/CONTRACT FORM (CONTINUED)

CAUTION - CONTRACTOR CODE OF BUSINESS ETHICS

FAR Part 3.1002(a) requires all government contractors to conduct themselves with the highest degree of integrity and honesty. Contractors should have a written code of business ethics and conduct within thirty days of award. To promote compliance with such code of business ethics and conduct, contractors should have an employee business ethics and compliance training program that facilitates timely discovery and disclosure of improper conduct in connection with government contracts and ensures corrective measures are promptly instituted and carried out. A contractor may be suspended and/or debarred for knowing failure by a principal to timely disclose to the government, in connection with the award, performance, or closeout of a government contract performed by the contractor or a subcontract awarded there under, credible evidence of a violation of federal criminal law involving fraud, conflict of interest, bribery, or gratuity violations found in title 18 of the United States Code or a violation of the False Claims Act. (31 U.S.C. 3729-3733)

DOCUMENTS/REFERNCES BELOW ARE INCORPORATED IN THIS SOLCITATION BY REFERENCE:

A. DLA Troop Support Clothing & Textiles Additional Quality Assurance Requirements August 2021* (formerly 4155.3 dated 03 November 1977) B. Item-Level Passive RFID Technology Manufacturer's Information Guide, Revision 2, December 2011.

C. DLA Labeling and Packaging Requirements for Dress Clothing (September 2018)

PATIENT PROTECTION AND AFFORDABLE HEALTH CARE ACT

Please note that the Patient Protection and Affordable Health Care Act ("the Act"), 124 Stat. 119, imposes duties upon employers concerning the provision of health care to their employees. Health insurance costs, including any costs associated with compliance with changes in the applicable law, are the sole responsibility of the offeror. Offerors are advised that their proposals should include any costs associated with the implementation of the Act. Any changes in health coverage costs and/or costs associated with compliance, occurring after award of a contract pursuant to this solicitation will not form the basis for an equitable adjustment of the contract price.

The Additional Documents - Clothing And Textiles (Dec 2008) DLA Troop Support are available as shown below:

DLA Troop Support Directorate of Clothing and Textiles

ATTN: DSCP-CBTC

700 Robbins Avenue Philadelphia, PA 19111-5092 Telephone [215] 737-8439

NOTICE TO DLA SUPPLIERS: DLA Troop Support has developed a web-based system that allows manufacturers the ability to request specifications, patterns and drawings on our contracting page. To request technical data for this solicitation use the following link to the DLA Troop Support C&T Technical Data Repository area at:

http://www.dla.mil/TroopSupport/ClothingandTextiles/SpecRequest.aspx

Please ensure the following required fields are entered when submitting your request:

Spec/Cid Number: MIL-C-29433 Pattern Date:4 May 2011 Item Description: Men's, MC Garrison Green Cap, P/W Type II, (PGC 02042) Solicitation Number: SPE1C1-22-R-0081

PLEASE ENSURE ALL CLAUSE FILL-INS ARE COMPLETE BEFORE SUBMITTING PROPOSAL.

Special Measurements is a provision that is required under this contract. Special Measurements are sizes outside of the item's size range. The special measurement unit price must be determined fair and reasonable before an award can be made. The special measurement unit price will be considered in determining an offeror's overall evaluated dollar value.

The Government intends to award a single Indefinite Delivery, Indefinite Quantity (IDIQ) Type Contract from this solicitation with a 60

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 11 OF 67 PAGES

SPE1C1-22-R-0081

SECTION A - SOLICITATION/CONTRACT FORM (CONTINUED)

month period, with five separate 12 month price tiers.. Delivery orders will be placed against the Basic Contract via separate Form DD 1155.

Offerors are required to submit offers on all five price Tiers. Failure to offer on all Tiers will result in rejection of your entire proposal..

Best Value Source Selection: Best Value Source Selection procedures will be utilized for this procurement. Offers will be evaluated based on the requirements of the solicitation. For this solicitation, Product Demonstration Models, and Past Performance/Experience are required.

Offerors are reminded to complete all applicable representation and certifications appearing in FAR 52.212-3 section of this solicitation. In addition, all offerors must complete annual representations and certifications electronically via the Online Representations and Certifications Application (website at: http://www.sam.gov).

Award will be based on factors other than cost and price alone:

Source evaluation and selection procedures are contained in Section "M" of the solicitation.

Submission of Technical Proposal is REQUIRED and must be submitted with your offer. (See Section "L")

This acquisition will utilize "Best Value" Source Selection Techniques. A technical proposal will be required in support of your offer. Please read sections "L" and "M" carefully as they contain instructions for preparation and explain the factors that will be used to evaluation your proposal.

Offerors are cautioned to make their original offer their best offer, as the Government reserves the right to make an award based on the initial offers without further discussions or negotiations.

Offer must provide fill-in information throughout the solicitation. Please sign page one of this solicitation and return the entire completed solicitation as your offer.

NOTE: THE DEFENSE APPROPRIATIONS AND AUTHORIZATIONS ACTS AND OTHER STATUTES (INCLUDING WHAT IS COMMONLY REFERRED TO AS "THE BERRY AMENDMENT") IMPOSES RESTRICTIONS ON THE DOD'S ACQUISITION OF FOREIGN PRODUCTS. GENERALLY, CLOTHING AND TEXTILE ITEMS (AS DEFINED IN DFARS 252.225-7012) MUST BE GROWN, REPROCESSED, REUSED, OR PRODUCED IN THE UNITED STATES UNLESS ONE OF

THE DFARS 252.225-7002-2 EXCEPTIONS APPLIES.

AUTHORIZED NEGOTIATORS:

The offeror represents that the following persons are authorized to negotiate on its behalf with the Government in connection with this request for proposal. Please list names, titles, e-mail addresses, and telephone numbers for each authorized negotiator.

Name: __________________________

Title: __________________________

Email: __________________________

Phone: __________________________

SECTION B - SUPPLIES OR SERVICES AND PRICES OR COSTS

The Government intends to make one award. The contract shall be for a term of 60 months, with five separate pricing tiers. Each tier shall be for a 12-month period.

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 12 OF 67 PAGES

SPE1C1-22-R-0081

SECTION B - SUPPLIES OR SERVICES AND PRICES OR COSTS (CONTINUED)

SUPPLIES AND PRICES

Item 0001: Men, MC Garrison Green Cap, P/W Type II PGC: 02042 / NSN Series8405-01-113-0941 Inspection and Acceptance: Origin Term: 60 Months Minimum Quantity: 17,309 Annual Estimated Quantity: 43,272 Prices are to be based on F.O.B Destination only

* The Annual Order Limitation Quantity (AOLQ) is 54,090 per tier. The AOLQ refers to the annual ordering limitation in FAR 52.216-19. The overall contract maximum is 270,450

NOTE: EACH TIER IS A 12 MONTH PERFORMANCE PERIOD

Production Lead Time: Delivery orders may require concurrent deliveries. The production lead time is 120 days after the date of the initial order and 90 days for all subsequent stock orders. The Government intends to issue delivery orders that will allow for uninterrupted delivery between orders, when possible. However, failure to do so shall not be the cause for any price adjustment under 52.212-4.

MAXIMUM CONTRACT LIMITATION: NOT TO EXCEED 270,450 each

Item 0001 Ship to:

DoDAAC: SD0131 RIC: VSTZ

Name and Delivery Address:

Travis Association For The Blind AF & MC 3PL -Distribution Services 4512 South Pleasant Valley Road Austin, Texas 78744

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 13 OF 67 PAGES

SECTION B - SUPPLIES OR SERVICES AND PRICES OR COSTS (CONTINUED)

SPECIAL MEASUREMENTS:

Inspection and Acceptance is at Destination. Shipping locations vary.

Item 0002: Men, MC Garrison Green Cap, P/W Type II, Special Measurement

PGC: 02042 / NSN: 8405000CAP200

Inspection and Acceptance: Destination Prices are to be based on F.O.B Destination only.

The ordering period is from the effective date of award through 60 months thereafter. The Government may issue delivery orders during this timeframe not to exceed the contract maximum quantity.

SECTION C - SPECIFICATIONS/SOW/SOO/ORD

C03 CONTRACTOR RETENTION OF SUPPLY CHAIN TRACEABILITY DOCUMENTATION (JUN 2020)

NOTE: SPECIFICATIONS AND SQUARE INCH TABLES ARE ATTACHED TO THE SOLICITATION.

ITEM 0001: Men, MC Garrison Green Cap, P/W

PGC: 02042

CAP, GARRISON, MAN'S, POLYESTER/WOOL GABARDINE, GREEN SHADE 2212 (MC)

RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND

QUALITY REQUIREMENTS FOUND ON THE WEB AT:

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 14 OF 67 PAGES

SECTION C - SPECIFICATIONS/SOW/SOO/ORD (CONTINUED)

http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx

FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A

FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.

ADDITIONAL INFORMATION FOR MIL-C-29433:

THE CAP, GARRISON, MAN'S, POLYESTER/WOOL

GABARDINE, GREEN SHADE 2212, 10.6 OZ., TYPE II,

CLASS 12, OF MIL-C-10176 IS AVAILABLE AND APPLICABLE

FOR SHADE, FINISH, AND COLORFASTNESS UNDER

ROLL NO. 3935

PATTERN DATE: 4 MAY 2011

INTERIM SPECIFICATION CHANGES TO MIL-C-29433:

PAGE 2, SPECIFICATIONS FEDERAL, DELETE "V-T-276"

AND SUBSTITUTE "A-A-50199".

PAGE 4, PARA 3.3.2, 2ND LINE, DELETE "2208" AND

SUBSTITUTE "2209".

PAGE 4,PARA 3.3.2, LINING AT THE END OF THE PARA

ADD THE FOLLOWING: AS AN ALTERNATE, A 100

PERCENT POLYESTER CLOTH, CONFORMING TO CLASS 3

OF A-A-52106 MAY BE USED.

PAGE 4, PARA 3.3.4.1 DELETE "Cotton thread. The cotton thread used for inside seaming shall be Type IC2, 3 ply, ticket No. A for overedging Type IA3, 2 ply, ticket number 70 conforming to V-T-276" AND SUBSTITUTE "Cotton Covered Polyester. The thread shall conform to Type I, A-A-50199, Ticket No. 70, 2 ply. It shall be used for the inside seaming and overedging"

PAGE 4, PARA. 3.3.3 SWEATBAND, DELETE: "THE

MATERIAL FOR THE SWEATBAND SHALL BE CLOTH,

COTTON, UNIFORM TWILL, GREEN SHADE 2224, (SEE

6.3), 8 OUNCE, CONFORMING TO TYPE III OF CCC-

C-461, EXCEPT THE REQUIREMENTS FOR COLORFAST-

NESS TO BLEACHING AND LIGHT SHALL NOT APPLY, OR

CLOTH, SATEEN, COTTON, OLIVE GREEN SHADE 107

CONFORMING TO CLASS 1 OF MIL-C-10296.", AND

SUBSTITUTE:

"THE MATERIAL FOR THE SWEATBAND SHALL BE CLOTH,

TWILL, COTTON, 5.7 TO 6.3 OUNCES, GREEN SHADE

2224 (SEE 6.3), CONFORMING TO MIL-C-29118,

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 15 OF 67 PAGES

SPE1C1-22-R-0081

SECTION C - SPECIFICATIONS/SOW/SOO/ORD (CONTINUED)

EXCEPT THE REQUIREMENT FOR COLORFASTNESS TO

LIGHT SHALL NOT APPLY, OR CLOTH, SATEEN, COTTON,

OLIVE GREEN SHADE 107 CONFORMING TO CLASS 1 OF

MIL-C-10296."

Page 4, Paragraph 3.3.3, "Sweatband", after end of paragraph add the following: "As a second alternate, an 8.5 ounce cloth, sateen, cotton, green shade CG483 made in accordance with Class 1 of MIL-C-10296 may be used."

PAGE 12, OPER. 16, FINISHED APPEARANCE, LINE 6,

AFTER "1/2", ADD "PLUS OR MINUS 1/8".

PAGE 14, AFTER OPERATION 17.B, ADD "ALTERNATE:

THE SWEATBAND MAY BE SEWN TO THE CAP WITH A

DOUBLE NEEDLE MACHINE, SEWING BOTH SIDES OF THE

SWEATBAND IN ONE OPERATION. STITCH TYPE SSAT-2."

SAMPLE INFORMATION:

BASIC MATERIAL -POLYESTER/WOOL GABARDINE, 10.6

OZ., GREEN 2212 CONFORMING TO TYPE II, CLASS 12

OF MIL-C-10176 IS AVAILABLE AND APPLICABLE FOR

SHADE, FINISH AND COLORFASTNESS; AND IS

IDENTIFIED AS ROLL NO. 14-086883.

PAGE 20, PARA 5.2.1.1, LINE 1, DELETE "ONE

HUNDRED TWENTY FIVE (125)" AND SUBSTITUTE "ONE

HUNDRED (100)."

PARA 5.2.1.2, LINE 2, DELETE "750" AND

SUBSTITUTE "600".

PARA 5.2.2, DELETE "ONE HUNDRED TWENTY FIVE

(125)" AND SUBSTITUTE "ONE HUNDRED (100)".

(Ref. W2042)

ADD TO CLAUSE 52.252-9P03;

DOCUMENTS RELATED TO CONSTRUCTION OF THE HEADSIZE GAUGE FOR INSPECTION CAN BE OBTAINED BY REFERENCE; APERTURE CARDS NO'S. 591,201,10A,14A OR 15A. IF REQUIRED, THESE DOCUMENTS ARE

AVAILABLE AS SHOWN BELOW:

DLA TROOP SUPPORT DIRECTORATE OF CLOTHING & TEXTILES

ATTN: FQ

BLDG. 3

PHILADELPHIA, PA 19111

NOTE: APERTURE CARD NO.____ (DRAWINGS ARE AVAILABLE TO CONTRACTORS FOR PROCURING THEIR OWN HEADSIZE GAUGES). HEADSIZE GAUGES WILL NO LONGER BE FURNISHED AS GOVERNMENT LOANED

PROPERTY.

DELETE CURRENT "BARCODE LABEL/TAG" REQUIREMENTS AND SUBSTITUTE THE FOLLOWING:

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 16 OF 67 PAGES

LABEL TAG: EACH ITEM SHALL BE INDIVIDUALLY BAR-CODED WITH A PAPER TAG FOR PERSONAL CLOTHING ITEMS. THE PAPER USED FOR THE TAGS SHALL BE STANDARD BLEACHED SULFATE HAVING A BASIS WEIGHT OF 100 POUNDS WITH A SMOOTH FINISH TO ACCEPT THERMAL TRANSFER AND DIRECT PRINTING. THE TAGS SHALL HAVE A HOLE AND SHALL BE ATTACHED TO EACH ITEM BY A FASTENER, CLEARLY LEGIBLE AND READABLE BY SCANNER. THE BAR CODING ELEMENT SHALL BE A 13 DIGIT NATIONAL STOCK NUMBER (NSN). THERE SHALL BE A 12 DIGIT UNIVERSAL PRODUCT CODE (UPC) ASSIGNED FOR ALL NSNS BY THE GOVERNMENT. THE INITIAL "UPC" MUST APPEAR BENEATH THE CODE.

THE BAR CODES FOR NSN AND UPC SHALL BE A MEDIUM TO HIGH DENSITY AND SHALL BE LOCATED SO THAT THEY ARE COMPLETELY VISIBLE ON THE ITEM WHEN IT IS FOLDED AND PACKAGED AS SPECIFIED.

THE LABEL'S LOCATION SHALL CAUSE NO DAMAGE TO THE ITEM.

NOTE: UNIVERSAL PRODUCT CODE INFORMATION THE GOVERMENT ASSIGNED UNIVERSAL PRODUCT CODE

(UPC) MUST BE PLACED ON ALL SHIPPING CARTONS ON WHICH THE NSN APPEARS.

THE FOLLOWING DEFECTS APPLY FOR BARCODE LABELS/TAGS:

BAR CODE OMITTED OR NOT READABLE BY SCANNER

HUMAN-READABLE INTERPRETATION (HRI) OMITTED OR ILLEGIBLE

NOT VISIBLE ON FOLDED, PACKAGED ITEM CAUSES DAMAGE TO THE ITEM

NOTE: IF THE END ITEM IS PLACED IN A PLASTIC BAG - USE TYPE VII (PRESSURE SENSTIVE LABEL)

OF MIL-DTL-32075.

IF THE END ITEM IS TIED IN A BUNDLE OR LEFT AS AN INDIVIDUAL ITEM, USE TYPE VIII (TAG, PAPER) OF MIL-DTL-32075.

INCLUDE T1721 OBJECT TEXT ID ST

A-A-52094B Thread, Cotton dated 01 May 2019 No Additional Information (ref. T1481)

ADDITIONAL INFORMATION FOR A-A-50196:

(NO CURRENT CHANGES TO A-A-50196B)

ADDITIONAL INFORMATION FOR MIL-C-29118:

NO ADDITIONAL INFORMATION FOLLOWS.

(Ref. T1058)

ADDITIONAL INFO FOR NN-P-71: NO ADDITIONAL INFORMATION FOLLOWS..

(Ref. T0829 - 9/11/06)

"MIL-DTL-32075: LABEL FOR CLOTHING, EQUIPAGE,

AND TENTAGE, GENERAL USE REPLACES DDD-L-20

(Ref. T0451 - June 19, 2007)

INTERIM SPECIFICATION CHANGES TO MIL-DTL-32075:

PAGE 6, TABLE I, "PHYSICAL REQUIREMENTS OF THE

TYPE VI FINISHED LABEL." UNDER "TEARING

STRENGTH" DELETE: "(LB.) MINIMUM" AND

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 17 OF 67 PAGES

SPE1C1-22-R-0081

SECTION C - SPECIFICATIONS/SOW/SOO/ORD (CONTINUED)

SUBSTITUTE: "(GNS) MINIMUM."

PAGE 12, PARA 3.3.2.17, AFTER "NSN" ADD

"AND THE UNIVERSAL PRODUCT CODE (UPC)

SUPPLIED BY THE GOVERNMENT, FOR ALL NSNs."

MIL-DTL-368K Cloth, Satin, Rayon and Cloth, Twill, Rayon dated 19 NOV 2019

No information follows

ADDITIONAL INFORMATION FOR MIL-S-3577:

NO ADDITIONAL INFORMATION FOLLOWS.

(Ref. T1426)

ADDITIONAL INFORMATION FOR MIL-C-3738:

WITH THE FOLLOWING INTERIM CHANGES TO MIL-C-3738:

NOTE: REDUCED AQL'S APPLY AS FOLLOWS:

PAGE 2, 2.1.2, DELETE LINES 4 THRU 7 AND

SUBSTITUTE:

"U.S. DEPARTMENT OF AGRICULTURE

METHODS OF TEST FOR GRADES OF WOOL TOP

(APPLICATION FOR TEST COPIES SHOULD BE ADDRESSED

TO THE U.S. DEPARTMENT OF AGRICULTURE, AGRI-

CULTURAL MARKETING SERVICE, WASHINGTON, DC

20402.)"

PAGE 6, AFTER 4.4.2, ADD THE FOLLOWING:

"4.4.2.1, WOOL. THE WOOL SHALL BE EXAMINED FOR

GRADE (SEE 3.3.1) IN THE UNDYED TOP FORM BY

COMPARISON WITH THE APPLICABLE U.S. STANDARD

(SEE 2.1.2). IN THE EVENT OF A DISPUTE, THE WOOL

GRADE SHALL BE DETERMINED BY THE WIDTH METHOD

(WEDGE). THE SAMPLE UNIT SHALL BE 1 YARD OF TOP,

PRIOR TO DYEING. THE SAMPLE SIZE (NUMBER OF

SAMPLE UNITS) SHALL BE AS LISTED BELOW. THE LOT

SIZE SHALL BE EXPRESSED IN UNITS OF ONE POUND.

THE RESULTS FROM EACH SAMPLE UNIT SHALL BE

REPORTED SEPARATELY. THE LOT SHALL BE UNACCEPT-

ABLE IF A SINGLE SAMPLE UNIT FAILS TO MEET THE

REQUIRED GRADE.

LOT SIZE (POUNDS) SAMPLE SIZE

800 OR LESS 2

801 UP TO AND INCLUDING

22,000 3

22,001 AND OVER 5

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 18 OF 67 PAGES

SPE1C1-22-R-0081

SECTION C - SPECIFICATIONS/SOW/SOO/ORD (CONTINUED)

PARA. 4.4.3.1 POINT COUNT EXAMINATION, SECOND

LINE, DELETE "10" AND SUBSTITUTE "7". AT END OF

PARAGRAPH, ADD THE FOLLOWING: "EXCEPT THAT

BOWED OR SKEWED FILLING YARNS SHALL NOT BE

SCORED."

PAGE 7, TABLE II, LINE 1, DELETE THE FOLLOWING:

"WOOL GRADE 3.3.1 ASTM D 2130 1/

UNDER TABLE II, DELETE "1/" IN ITS ENTIRETY.

PAGE 8, DELETE PARAS. 4.5 AND 4.5.1.

PAGE 11, PARA. 6.7, DELETE ENTIRELY.

CERTIFICATE OF CONFORMANCE IS APPLICABLE FOR

THE GRADING OF WOOL IN TOP FORM.

MIL-DTL-10176L Cloth, Gabardine: Wool, Polyester and Wool dated 30-Mar-2018

SPONGING:

COLD WATER SPONGING IS REQUIRED. A PROPER ALCOHOL WETTING AGENT SHALL BE USED TO INSURE SHRINKAGE IS ACCOMPLISHED AND WATER RESISTANT FINISH (when specified) IS NOT RELEASED.

THE WATER REPELLANT TREATMENT (When Specified) SHALL BE APPLIED BEFORE THE SPONGING

OPERATION.

WHEN AIR FORCE SHADE 1605 IS SPECIFIED, THE CLOTH SHALL BE PIECE DYED.

ADDITIONAL INFORMATION FOR MIL-C-10296:

NO ADDITIONAL INFORMATION FOLLOWS.

ADDITIONAL INFO FOR MIL-P-15011: NO ADDITIONAL INFORMATION FOLLOWS.

ADDITIONAL INFORMATION FOR MIL-B-17757:

MIL-B-17757 IS CANCELLED WITHOUT REPLACEMENT.

THE FOLLOWING DOCUMENTS ARE AUTHORIZED FOR USE IN LIEU

OF MIL-B-17757:

ASTM-D-5118, STANDARD PRACTICE FOR FABRICATION OF FIBERBOARD SHIPPING BOXES, AND ASTM- D-1974, STANDARD PRACTICE FOR METHOD OF CLOSING, SEALING AND REINFORCING FIBERBOARD

SHIPPING CONTAINERS.

(ref. T0857 - 6/15/06)

ADDITIONAL INFORMATION FOR MIL-I-45208:

NOTE: MIL-I-45208 HAS BEEN CANCELLED AND REPLACED BY THE FOLLOWING: INTERNATIONAL

STANDARDS ISO 9001:2008

OR AMERICAN SOCIETY FOR QUALITY ASQ 2008 VERSION.

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 19 OF 67 PAGES

(ref. T1286 )