SCOPE OF WORK B48593~1.docx
DOCX document 16 KB Posted
- Contract number
- 26-444DHS-DEVDI-P-84719
- Issued by
- Illinois
About this file
This document is a Scope of Work (SOW) for Contract B-48593, involving fire alarm testing, inspection, repair, and maintenance services for the William Fox Developmental Center. The contract appears to be a state-level procurement, likely for a state health or facilities management agency, with a service provider responsible for maintaining fire alarm systems.
The contract covers comprehensive fire alarm system maintenance and testing, with a term extending from the start date to June 30, 2028. The vendor is required to perform semi-annual visual-functional testing, annual sensitivity testing of smoke/heat/duct detectors, and document factory and test settings for all fire alarm system components. The scope includes testing pull stations, heat detectors, duct detectors, horns/strobes, main panels, and standby batteries. The vendor must supply necessary tools and parts, respond to repairs within 24 hours, and maintain compliance with IDPH/NFPA LSC 2012 Code standards. All work must be coordinated through the Facility Chief Engineer, with written reports submitted after each inspection and testing cycle.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| IL Standard Terms and Conditions~2.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
B-48593
SCOPE OF WORK
FY 26 Fire Alarm Testing, Inspection, Repair, & Maintenance
Term: To begin date to last dated signature of both parties– June 30, 2028 Perform inspections, repairs, maintenance services to the Notifier Alarm systems located at Wm. Fox Developmental Center
· Provide technicians for repair and maintenance services, emergency services, emergency repairs and after-hours services, if necessary.
1. Vendor must perform semi-annual visual- functional testing of facility Smoke Detectors for proper operation to meet IDPH/NFPA LSC 2012 Code and must provide written report to Facility Chief Engineer.
1. Vendor must perform on annual basis testing of sensitivity of all Smoke/Heat/Duct Detectors that may apply to meet IDPH/NFPA LSC 2012 Code and must provide written report to Facility Chief Engineer.
1. Vendor must document factory settings on all Smoke Detectors and test settings on all Smoke Detectors and must provide written report to Facility Chief Engineer.
1. Vendor must test all Pull Stations, Heat Detectors, Duct Detectors, Horns/Strobes, Main Panels and Standby Battery(s) and all other associated equipment to the Facility Fire Alarm System.
*All work is to be scheduled through the Chief Engineer, repairs as needed with a response time of 24 hours. The Chief Engineer will be made aware of any regulatory or statutory changes that would affect the scope of compliance with the laws and standards
*The Vendor will supply the tools and parts needed to make necessary repairs and to perform scheduled maintenance.
File details come from the government source that posted it. Updated .