SF30.pdf

NSN 7540-01-152-8070 STANDARD FORM 30. (Rev. 10-83) Previous Edition unusable Prescribed by GSA FAR (48 CFR) 53.243

Page of Pages AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT 1. Contract ID Code

2. AMENDMENT MODIFICATION NO. 3. EFFECTIVE DATE 4. REQUISITION/PURCHASE REQ. NO. 5. PROJECT NO. (if applicable)

6. ISSUED BY CODE 7. ADMINISTERED BY (If other than item 6) CODE

(x) 9A. AMENDMENT OF SOLICITATION NO.

9B. DATED (SEE ITEM 11)

10A. MODIFICATION OF CONTRACT/ORDER NO.

8. NAME AND ADDRESS OF CONTRACTOR (NO., Street, Country, State and ZIP Code)

CODE FACILITY CODE

10B. DATED (SEE ITEM 13)

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

The above numbered solicitation is amended as set forth in item 14. The hour and date specified for receipt of offers is extended, is not extended.

Offers must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended, by one of the following methods:

(a) By completing items 8 and 15, and returning ______ copies of amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OR OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN REJECTION OF YOUR OFFER. If by virtue of this amendment your desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. ACCOUNTING AND APPROPRIATION DATA (If required)

13. THIS ITEM ONLY APPLIES TO MODIFICATION OF CONTRACTS/ORDERS. IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

Check One

A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE

CONTRACT ORDER NO. IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation date, etc) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(b).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

E. IMPORTANT: Contractor is not, is required to sign this document and return _______ copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible)

Except as provided herein, all terms and conditions of the document referenced in item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. NAME AND TITLE OF SIGNER (Type or print)

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

15B. CONTRACTOR/OFFEROR 16B. UNITED STATES OF AMERICA

(Signature of person authorized to sign)

15C. DATE SIGNED

(Signature of Contracting Officer)

16C. DATE SIGNED

Continuation Page

PAGE 2 OF 23 SB134118RQ0065001

Continued from Block 14...

2) Add the attached Oil Cooled Job Plans.

These amendment attachments will be conformed into the final contract document.

Table of Contents

PAGE 3 OF 23 SB134118RQ0065001

Wage Determination 15-5415 12.26.2017

Oil Cooled Job Plans

PAGE 4 OF 23 SB134118RQ0065001

CLAUSES

Wage Determination 15-5415 12.26.2017

WD 155415 (Rev.6) was first posted on www.wdol.gov on 01/02/2018

REGISTER OF WAGE DETERMINATIONS UNDER | U.S. DEPARTMENT OF LABOR

THE SERVICE CONTRACT ACT | EMPLOYMENT STANDARDS ADMINISTRATION

By direction of the Secretary of Labor | WAGE AND HOUR DIVISION

| WASHINGTON D.C. 20210

| Wage Determination No.: 20155415 Daniel W. Simms Division of | Revision No.: 6 Director Wage Determinations| Date Of Revision: 12/26/2017 Note: Under Executive Order (EO) 13658, an hourly minimum wage of $10.35 for calendar year 2018 applies to all contracts subject to the Service Contract Act for which the contract is awarded (and any solicitation was issued) on or after January 1, 2015. If this contract is covered by the EO, the contractor must pay all workers in any classification listed on this wage determination at least $10.35 per hour (or the applicable wage rate listed on this wage determination, if it is higher) for all hours spent performing on the contract in calendar year 2018. The EO minimum wage rate will be adjusted annually.

Additional information on contractor requirements and worker protections under the EO is available at www.dol.gov/whd/govcontracts State: Colorado

Area: Colorado County of Boulder **Fringe Benefits Required Follow the Occupational Listing**

OCCUPATION CODE TITLE FOOTNOTE RATE

01000 Administrative Support And Clerical Occupations 01011 Accounting Clerk I 16.23 01012 Accounting Clerk II 18.19 01013 Accounting Clerk III 20.35 01020 Administrative Assistant 26.31 01035 Court Reporter 19.59 01041 Customer Service Representative I 12.50 01042 Customer Service Representative II 14.07 01043 Customer Service Representative III 15.34 01051 Data Entry Operator I 15.40 01052 Data Entry Operator II 16.79 01060 Dispatcher, Motor Vehicle 21.31 01070 Document Preparation Clerk 16.01 01090 Duplicating Machine Operator 16.01 01111 General Clerk I 14.67 01112 General Clerk II 15.99 01113 General Clerk III 17.95 01120 Housing Referral Assistant 21.75 01141 Messenger Courier 13.82 01191 Order Clerk I 16.01 01192 Order Clerk II 17.46 01261 Personnel Assistant (Employment) I 17.29 01262 Personnel Assistant (Employment) II 19.35 01263 Personnel Assistant (Employment) III 21.56 01270 Production Control Clerk 26.91 01290 Rental Clerk 15.53 01300 Scheduler, Maintenance 17.15

PAGE 5 OF 23 SB134118RQ0065001

01311 Secretary I 17.15 01312 Secretary II 19.19 01313 Secretary III 21.75 01320 Service Order Dispatcher 17.39 01410 Supply Technician 26.31 01420 Survey Worker 17.77 01460 Switchboard Operator/Receptionist 14.28 01531 Travel Clerk I 13.55 01532 Travel Clerk II 14.20 01533 Travel Clerk III 15.19 01611 Word Processor I 15.57 01612 Word Processor II 17.47 01613 Word Processor III 19.55 05000 Automotive Service Occupations 05005 Automobile Body Repairer, Fiberglass 26.19 05010 Automotive Electrician 21.10 05040 Automotive Glass Installer 19.75 05070 Automotive Worker 19.75 05110 Mobile Equipment Servicer 17.61 05130 Motor Equipment Metal Mechanic 22.42 05160 Motor Equipment Metal Worker 19.75 05190 Motor Vehicle Mechanic 22.42 05220 Motor Vehicle Mechanic Helper 16.41 05250 Motor Vehicle Upholstery Worker 19.36 05280 Motor Vehicle Wrecker 19.75 05310 Painter, Automotive 21.10 05340 Radiator Repair Specialist 19.75 05370 Tire Repairer 14.98 05400 Transmission Repair Specialist 22.42 07000 Food Preparation And Service Occupations 07010 Baker 14.52 07041 Cook I 14.14 07042 Cook II 16.36 07070 Dishwasher 10.89 07130 Food Service Worker 11.39 07210 Meat Cutter 15.13 07260 Waiter/Waitress 10.65 09000 Furniture Maintenance And Repair Occupations 09010 Electrostatic Spray Painter 19.06 09040 Furniture Handler 15.90 09080 Furniture Refinisher 19.06 09090 Furniture Refinisher Helper 15.90 09110 Furniture Repairer, Minor 18.10 09130 Upholsterer 19.06 11000 General Services And Support Occupations 11030 Cleaner, Vehicles 11.43 11060 Elevator Operator 12.62 11090 Gardener 18.58 11122 Housekeeping Aide 12.62 11150 Janitor 12.62 11210 Laborer, Grounds Maintenance 14.67 11240 Maid or Houseman 10.08 11260 Pruner 13.16 11270 Tractor Operator 17.30 11330 Trail Maintenance Worker 14.67 11360 Window Cleaner 14.05 12000 Health Occupations 12010 Ambulance Driver 18.67

PAGE 6 OF 23 SB134118RQ0065001

12011 Breath Alcohol Technician 20.66 12012 Certified Occupational Therapist Assistant 23.57 12015 Certified Physical Therapist Assistant 22.69 12020 Dental Assistant 18.55 12025 Dental Hygienist 41.72 12030 EKG Technician 28.12 12035 Electroneurodiagnostic Technologist 28.12 12040 Emergency Medical Technician 18.67 12071 Licensed Practical Nurse I 19.81 12072 Licensed Practical Nurse II 22.16 12073 Licensed Practical Nurse III 24.70 12100 Medical Assistant 16.78 12130 Medical Laboratory Technician 18.46 12160 Medical Record Clerk 17.22 12190 Medical Record Technician 19.27 12195 Medical Transcriptionist 19.92 12210 Nuclear Medicine Technologist 43.14 12221 Nursing Assistant I 11.78 12222 Nursing Assistant II 13.25 12223 Nursing Assistant III 14.46 12224 Nursing Assistant IV 16.23 12235 Optical Dispenser 20.96 12236 Optical Technician 18.46 12250 Pharmacy Technician 16.19 12280 Phlebotomist 16.66 12305 Radiologic Technologist 29.54 12311 Registered Nurse I 29.98 12312 Registered Nurse II 36.67 12313 Registered Nurse II, Specialist 36.67 12314 Registered Nurse III 43.96 12315 Registered Nurse III, Anesthetist 43.96 12316 Registered Nurse IV 53.17 12317 Scheduler (Drug and Alcohol Testing) 27.05 12320 Substance Abuse Treatment Counselor 20.63 13000 Information And Arts Occupations 13011 Exhibits Specialist I 22.34 13012 Exhibits Specialist II 27.68 13013 Exhibits Specialist III 33.85 13041 Illustrator I 24.27 13042 Illustrator II 27.95 13043 Illustrator III 34.20 13047 Librarian 34.23 13050 Library Aide/Clerk 15.88 13054 Library Information Technology Systems 30.92 Administrator 13058 Library Technician 17.64 13061 Media Specialist I 22.30 13062 Media Specialist II 24.95 13063 Media Specialist III 27.82 13071 Photographer I 18.54 13072 Photographer II 20.74 13073 Photographer III 25.70 13074 Photographer IV 34.57 13075 Photographer V 41.82 13090 Technical Order Library Clerk 18.16 13110 Video Teleconference Technician 19.03 14000 Information Technology Occupations 14041 Computer Operator I 17.81

PAGE 7 OF 23 SB134118RQ0065001

14042 Computer Operator II 19.93 14043 Computer Operator III 22.21 14044 Computer Operator IV 24.69 14045 Computer Operator V 28.56 14071 Computer Programmer I (see 1) 24.31 14072 Computer Programmer II (see 1) 14073 Computer Programmer III (see 1) 14074 Computer Programmer IV (see 1) 14101 Computer Systems Analyst I (see 1) 14102 Computer Systems Analyst II (see 1) 14103 Computer Systems Analyst III (see 1) 14150 Peripheral Equipment Operator 17.81 14160 Personal Computer Support Technician 24.69 14170 System Support Specialist 29.69 15000 Instructional Occupations 15010 Aircrew Training Devices Instructor (NonRated) 35.58 15020 Aircrew Training Devices Instructor (Rated) 43.06 15030 Air Crew Training Devices Instructor (Pilot) 49.15 15050 Computer Based Training Specialist / Instructor 35.58 15060 Educational Technologist 34.29 15070 Flight Instructor (Pilot) 49.15 15080 Graphic Artist 25.65 15085 Maintenance Test Pilot, Fixed, Jet/Prop 42.28 15086 Maintenance Test Pilot, Rotary Wing 42.28 15088 NonMaintenance Test/CoPilot 42.28 15090 Technical Instructor 24.03 15095 Technical Instructor/Course Developer 29.39 15110 Test Proctor 19.40 15120 Tutor 19.40 16000 Laundry, DryCleaning, Pressing And Related Occupations 16010 Assembler 10.17 16030 Counter Attendant 10.17 16040 Dry Cleaner 13.15 16070 Finisher, Flatwork, Machine 10.17 16090 Presser, Hand 10.17 16110 Presser, Machine, Drycleaning 10.17 16130 Presser, Machine, Shirts 10.17 16160 Presser, Machine, Wearing Apparel, Laundry 10.17 16190 Sewing Machine Operator 14.04 16220 Tailor 14.92 16250 Washer, Machine 11.31 19000 Machine Tool Operation And Repair Occupations 19010 MachineTool Operator (Tool Room) 22.17 19040 Tool And Die Maker 26.10 21000 Materials Handling And Packing Occupations 21020 Forklift Operator 16.46 21030 Material Coordinator 26.91 21040 Material Expediter 26.91 21050 Material Handling Laborer 17.36 21071 Order Filler 13.44 21080 Production Line Worker (Food Processing) 16.46 21110 Shipping Packer 16.72 21130 Shipping/Receiving Clerk 16.72 21140 Store Worker I 12.22 21150 Stock Clerk 16.94 21210 Tools And Parts Attendant 16.46 21410 Warehouse Specialist 16.46 23000 Mechanics And Maintenance And Repair Occupations

PAGE 8 OF 23 SB134118RQ0065001

23010 Aerospace Structural Welder 28.53 23019 Aircraft Logs and Records Technician 22.49 23021 Aircraft Mechanic I 27.10 23022 Aircraft Mechanic II 28.53 23023 Aircraft Mechanic III 29.70 23040 Aircraft Mechanic Helper 19.22 23050 Aircraft, Painter 25.80 23060 Aircraft Servicer 22.49 23070 Aircraft Survival Flight Equipment Technician 25.80 23080 Aircraft Worker 24.13 23091 Aircrew Life Support Equipment (ALSE) Mechanic 24.13 I 23092 Aircrew Life Support Equipment (ALSE) Mechanic 27.10

II

23110 Appliance Mechanic 22.34 23120 Bicycle Repairer 16.48 23125 Cable Splicer 33.63 23130 Carpenter, Maintenance 19.40 23140 Carpet Layer 22.45 23160 Electrician, Maintenance 27.39 23181 Electronics Technician Maintenance I 24.35 23182 Electronics Technician Maintenance II 26.02 23183 Electronics Technician Maintenance III 27.62 23260 Fabric Worker 21.04 23290 Fire Alarm System Mechanic 25.49 23310 Fire Extinguisher Repairer 19.53 23311 Fuel Distribution System Mechanic 25.81 23312 Fuel Distribution System Operator 20.87 23370 General Maintenance Worker 19.47 23380 Ground Support Equipment Mechanic 27.10 23381 Ground Support Equipment Servicer 22.49 23382 Ground Support Equipment Worker 24.13 23391 Gunsmith I 19.42 23392 Gunsmith II 22.45 23393 Gunsmith III 25.49 23410 Heating, Ventilation And AirConditioning 24.60 Mechanic 23411 Heating, Ventilation And Air Contidioning 25.90 Mechanic (Research Facility) 23430 Heavy Equipment Mechanic 24.72 23440 Heavy Equipment Operator 22.34 23460 Instrument Mechanic 28.48 23465 Laboratory/Shelter Mechanic 23.99 23470 Laborer 13.87 23510 Locksmith 23.07 23530 Machinery Maintenance Mechanic 28.05 23550 Machinist, Maintenance 23.39 23580 Maintenance Trades Helper 17.98 23591 Metrology Technician I 28.48 23592 Metrology Technician II 29.99 23593 Metrology Technician III 31.21 23640 Millwright 25.49 23710 Office Appliance Repairer 22.29 23760 Painter, Maintenance 18.26 23790 Pipefitter, Maintenance 26.08 23810 Plumber, Maintenance 24.12 23820 Pneudraulic Systems Mechanic 25.49 23850 Rigger 25.49

PAGE 9 OF 23 SB134118RQ0065001

23870 Scale Mechanic 22.45 23890 SheetMetal Worker, Maintenance 21.26 23910 Small Engine Mechanic 21.68 23931 Telecommunications Mechanic I 32.77 23932 Telecommunications Mechanic II 34.49 23950 Telephone Lineman 25.67 23960 Welder, Combination, Maintenance 21.05 23965 Well Driller 25.27 23970 Woodcraft Worker 25.49 23980 Woodworker 19.42 24000 Personal Needs Occupations 24550 Case Manager 15.93 24570 Child Care Attendant 12.32 24580 Child Care Center Clerk 15.59 24610 Chore Aide 12.01 24620 Family Readiness And Support Services 15.93 Coordinator 24630 Homemaker 16.29 25000 Plant And System Operations Occupations 25010 Boiler Tender 28.84 25040 Sewage Plant Operator 27.58 25070 Stationary Engineer 28.84 25190 Ventilation Equipment Tender 20.24 25210 Water Treatment Plant Operator 27.58 27000 Protective Service Occupations 27004 Alarm Monitor 22.91 27007 Baggage Inspector 13.34 27008 Corrections Officer 25.70 27010 Court Security Officer 27.27 27030 Detection Dog Handler 21.32 27040 Detention Officer 25.70 27070 Firefighter 29.40 27101 Guard I 13.34 27102 Guard II 21.32 27131 Police Officer I 31.71 27132 Police Officer II 35.25 28000 Recreation Occupations 28041 Carnival Equipment Operator 13.99 28042 Carnival Equipment Repairer 15.20 28043 Carnival Worker 10.44 28210 Gate Attendant/Gate Tender 16.58 28310 Lifeguard 11.73 28350 Park Attendant (Aide) 18.43 28510 Recreation Aide/Health Facility Attendant 13.53 28515 Recreation Specialist 19.70 28630 Sports Official 14.76 28690 Swimming Pool Operator 17.58 29000 Stevedoring/Longshoremen Occupational Services 29010 Blocker And Bracer 23.50 29020 Hatch Tender 23.50 29030 Line Handler 23.50 29041 Stevedore I 21.91 29042 Stevedore II 25.48 30000 Technical Occupations 30010 Air Traffic Control Specialist, Center (HFO) (see 2) 40.65 30011 Air Traffic Control Specialist, Station (HFO) (see 2) 28.02 30012 Air Traffic Control Specialist, Terminal (HFO) (see 2) 30.87 30021 Archeological Technician I 19.40

PAGE 10 OF 23 SB134118RQ0065001

30022 Archeological Technician II 21.70 30023 Archeological Technician III 26.89 30030 Cartographic Technician 26.41 30040 Civil Engineering Technician 27.07 30051 Cryogenic Technician I 27.53 30052 Cryogenic Technician II 29.50 30061 Drafter/CAD Operator I 18.45 30062 Drafter/CAD Operator II 20.65 30063 Drafter/CAD Operator III 23.84 30064 Drafter/CAD Operator IV 31.50 30081 Engineering Technician I 18.44 30082 Engineering Technician II 20.69 30083 Engineering Technician III 23.15 30084 Engineering Technician IV 28.69 30085 Engineering Technician V 35.09 30086 Engineering Technician VI 42.45 30090 Environmental Technician 24.08 30095 Evidence Control Specialist 24.12 30210 Laboratory Technician 23.30 30221 Latent Fingerprint Technician I 27.53 30222 Latent Fingerprint Technician II 29.50 30240 Mathematical Technician 26.62 30361 Paralegal/Legal Assistant I 19.46 30362 Paralegal/Legal Assistant II 24.11 30363 Paralegal/Legal Assistant III 29.49 30364 Paralegal/Legal Assistant IV 35.68 30375 Petroleum Supply Specialist 29.50 30390 PhotoOptics Technician 26.62 30395 Radiation Control Technician 29.50 30461 Technical Writer I 26.26 30462 Technical Writer II 32.12 30463 Technical Writer III 38.86 30491 Unexploded Ordnance (UXO) Technician I 25.83 30492 Unexploded Ordnance (UXO) Technician II 31.25 30493 Unexploded Ordnance (UXO) Technician III 37.46 30494 Unexploded (UXO) Safety Escort 25.83 30495 Unexploded (UXO) Sweep Personnel 25.83 30501 Weather Forecaster I 27.53 30502 Weather Forecaster II 32.49 30620 Weather Observer, Combined Upper Air Or (see 2) 23.84 Surface Programs 30621 Weather Observer, Senior (see 2) 26.41 31000 Transportation/Mobile Equipment Operation Occupations 31010 Airplane Pilot 31.25 31020 Bus Aide 13.08 31030 Bus Driver 18.95 31043 Driver Courier 14.49 31260 Parking and Lot Attendant 10.69 31290 Shuttle Bus Driver 15.55 31310 Taxi Driver 12.89 31361 Truckdriver, Light 15.55 31362 Truckdriver, Medium 19.65 31363 Truckdriver, Heavy 21.57 31364 Truckdriver, TractorTrailer 21.57 99000 Miscellaneous Occupations 99020 Cabin Safety Specialist 15.24 99030 Cashier 10.89 99050 Desk Clerk 11.46

PAGE 11 OF 23 SB134118RQ0065001

99095 Embalmer 25.83 99130 Flight Follower 25.83 99251 Laboratory Animal Caretaker I 12.00 99252 Laboratory Animal Caretaker II 13.03 99260 Marketing Analyst 32.58 99310 Mortician 25.83 99410 Pest Controller 21.66 99510 Photofinishing Worker 13.57 99710 Recycling Laborer 20.45 99711 Recycling Specialist 24.66 99730 Refuse Collector 18.37 99810 Sales Clerk 12.60 99820 School Crossing Guard 14.00 99830 Survey Party Chief 22.70 99831 Surveying Aide 12.60 99832 Surveying Technician 20.64 99840 Vending Machine Attendant 17.40 99841 Vending Machine Repairer 20.64 99842 Vending Machine Repairer Helper 17.40

Note: Executive Order (EO) 13706, Establishing Paid Sick Leave for Federal Contractors, applies to all contracts subject to the Service Contract Act for which the contract is awarded (and any solicitation was issued) on or after January 1, 2017. If this contract is covered by the EO, the contractor must provide employees with 1 hour of paid sick leave for every 30 hours they work, up to 56 hours of paid sick leave each year. Employees must be permitted to use paid sick leave for their own illness, injury or other healthrelated needs, including preventive care; to assist a family member (or person who is like family to the employee) who is ill, injured, or has other healthrelated needs, including preventive care; or for reasons resulting from, or to assist a family member (or person who is like family to the employee) who is the victim of, domestic violence, sexual assault, or stalking. Additional information on contractor requirements and worker protections under the EO is available at www.dol.gov/whd/govcontracts.

ALL OCCUPATIONS LISTED ABOVE RECEIVE THE FOLLOWING BENEFITS:

HEALTH & WELFARE: $4.41 per hour or $176.40 per week or $764.40 per month

HEALTH & WELFARE EO 13706: $4.13 per hour, or $165.20 per week, or $715.87 per month

VACATION: 2 weeks paid vacation after 1 year of service with a contractor or successor, 3 weeks after 5 years, and 4 weeks after 15 years. Length of service includes the whole span of continuous service with the present contractor or successor, wherever employed, and with the predecessor contractors in the performance of similar work at the same Federal facility. (Reg. 29 CFR 4.173)

HOLIDAYS: A minimum of ten paid holidays per year: New Year's Day, Martin Luther King Jr.'s Birthday, Washington's Birthday, Memorial Day, Independence Day, Labor Day, Columbus Day, Veterans' Day, Thanksgiving Day, and Christmas Day. (A contractor may substitute for any of the named holidays another day off with pay in accordance with a plan communicated to the employees involved.) (See 29 CFR 4.174)

PAGE 12 OF 23 SB134118RQ0065001

THE OCCUPATIONS WHICH HAVE NUMBERED FOOTNOTES IN PARENTHESES RECEIVE THE FOLLOWING:

1) COMPUTER EMPLOYEES: Under the SCA at section 8(b), this wage determination does not apply to any employee who individually qualifies as a bona fide executive, administrative, or professional employee as defined in 29 C.F.R. Part 541. Because most Computer System Analysts and Computer Programmers who are compensated at a rate not less than $27.63 (or on a salary or fee basis at a rate not less than $455 per week) an hour would likely qualify as exempt computer professionals, (29 C.F.R. 541.

400) wage rates may not be listed on this wage determination for all occupations within those job families. In addition, because this wage determination may not list a wage rate for some or all occupations within those job families if the survey data indicates that the prevailing wage rate for the occupation equals or exceeds $27.63 per hour conformances may be necessary for certain nonexempt employees. For example, if an individual employee is nonexempt but nevertheless performs duties within the scope of one of the Computer Systems Analyst or Computer Programmer occupations for which this wage determination does not specify an SCA wage rate, then the wage rate for that employee must be conformed in accordance with the conformance procedures described in the conformance note included on this wage determination.

Additionally, because job titles vary widely and change quickly in the computer industry, job titles are not determinative of the application of the computer professional exemption. Therefore, the exemption applies only to computer employees who satisfy the compensation requirements and whose primary duty consists of:

(1) The application of systems analysis techniques and procedures, including consulting with users, to determine hardware, software or system functional specifications;

(2) The design, development, documentation, analysis, creation, testing or modification of computer systems or programs, including prototypes, based on and related to user or system design specifications;

(3) The design, documentation, testing, creation or modification of computer programs related to machine operating systems; or

(4) A combination of the aforementioned duties, the performance of which requires the same level of skills. (29 C.F.R. 541.400).

2) AIR TRAFFIC CONTROLLERS AND WEATHER OBSERVERS NIGHT PAY & SUNDAY PAY: If you work at night as part of a regular tour of duty, you will earn a night differential and receive an additional 10% of basic pay for any hours worked between 6pm and 6am.

If you are a fulltime employed (40 hours a week) and Sunday is part of your regularly scheduled workweek, you are paid at your rate of basic pay plus a Sunday premium of 25% of your basic rate for each hour of Sunday work which is not overtime (i.e. occasional work on Sunday outside the normal tour of duty is considered overtime work).

** HAZARDOUS PAY DIFFERENTIAL **

An 8 percent differential is applicable to employees employed in a position that represents a high degree of hazard when working with or in close proximity to ordnance, explosives, and incendiary materials. This includes work such as screening, blending, dying, mixing, and pressing of sensitive ordnance, explosives, and pyrotechnic compositions such as lead azide, black powder and photoflash powder.

All dryhouse activities involving propellants or explosives. Demilitarization, modification, renovation, demolition, and maintenance operations on sensitive ordnance, explosives and incendiary materials. All operations involving regrading and cleaning of artillery ranges.

A 4 percent differential is applicable to employees employed in a position that

PAGE 13 OF 23 SB134118RQ0065001

represents a low degree of hazard when working with, or in close proximity to ordnance, (or employees possibly adjacent to) explosives and incendiary materials which involves potential injury such as laceration of hands, face, or arms of the employee engaged in the operation, irritation of the skin, minor burns and the like;

minimal damage to immediate or adjacent work area or equipment being used. All operations involving, unloading, storage, and hauling of ordnance, explosive, and incendiary ordnance material other than small arms ammunition. These differentials are only applicable to work that has been specifically designated by the agency for ordnance, explosives, and incendiary material differential pay.

** UNIFORM ALLOWANCE **

If employees are required to wear uniforms in the performance of this contract (either by the terms of the Government contract, by the employer, by the state or local law, etc.), the cost of furnishing such uniforms and maintaining (by laundering or dry cleaning) such uniforms is an expense that may not be borne by an employee where such cost reduces the hourly rate below that required by the wage determination. The Department of Labor will accept payment in accordance with the following standards as compliance:

The contractor or subcontractor is required to furnish all employees with an adequate number of uniforms without cost or to reimburse employees for the actual cost of the uniforms. In addition, where uniform cleaning and maintenance is made the responsibility of the employee, all contractors and subcontractors subject to this wage determination shall (in the absence of a bona fide collective bargaining agreement providing for a different amount, or the furnishing of contrary affirmative proof as to the actual cost), reimburse all employees for such cleaning and maintenance at a rate of $3.35 per week (or $.67 cents per day). However, in those instances where the uniforms furnished are made of "wash and wear" materials, may be routinely washed and dried with other personal garments, and do not require any special treatment such as dry cleaning, daily washing, or commercial laundering in order to meet the cleanliness or appearance standards set by the terms of the Government contract, by the contractor, by law, or by the nature of the work, there is no requirement that employees be reimbursed for uniform maintenance costs.

** REQUEST FOR AUTHORIZATION OF ADDITIONAL CLASSIFICATION AND WAGE RATE, Standard Form 1444 (SF1444) **

Conformance Process:

The contracting officer shall require that any class of service employee which is not listed herein and which is to be employed under the contract (i.e., the work to be performed is not performed by any classification listed in the wage determination), be classified by the contractor so as to provide a reasonable relationship (i.e., appropriate level of skill comparison) between such unlisted classifications and the classifications listed in the wage determination (See 29 CFR 4.6(b)(2)(i)). Such conforming procedures shall be initiated by the contractor prior to the performance of contract work by such unlisted class(es) of employees (See 29 CFR 4.6(b)(2)(ii)). The Wage and Hour Division shall make a final determination of conformed classification, wage rate, and/or fringe benefits which shall be paid to all employees performing in the classification from the first day of work on which contract work is performed by them in the classification. Failure to pay such unlisted employees the compensation agreed upon by the interested parties and/or fully determined by the Wage and Hour Division retroactive to the date such class of employees commenced contract work shall be a violation of the Act and this contract. (See 29 CFR 4.6(b)(2)(v)). When multiple wage determinations are included in a contract, a separate SF1444 should be prepared for each wage determination to which a class(es) is to be conformed.

PAGE 14 OF 23 SB134118RQ0065001

The process for preparing a conformance request is as follows:

1) When preparing the bid, the contractor identifies the need for a conformed occupation(s) and computes a proposed rate(s).

2) After contract award, the contractor prepares a written report listing in order the proposed classification title(s), a Federal grade equivalency (FGE) for each proposed classification(s), job description(s), and rationale for proposed wage rate(s), including information regarding the agreement or disagreement of the authorized representative of the employees involved, or where there is no authorized representative, the employees themselves. This report should be submitted to the contracting officer no later than 30 days after such unlisted class(es) of employees performs any contract work.

3) The contracting officer reviews the proposed action and promptly submits a report of the action, together with the agency's recommendations and pertinent information including the position of the contractor and the employees, to the U.S.

Department of Labor, Wage and Hour Division, for review (See 29 CFR 4.6(b)(2)(ii)).

4) Within 30 days of receipt, the Wage and Hour Division approves, modifies, or disapproves the action via transmittal to the agency contracting officer, or notifies the contracting officer that additional time will be required to process the request.

5) The contracting officer transmits the Wage and Hour Division's decision to the contractor.

6) Each affected employee shall be furnished by the contractor with a written copy of such determination or it shall be posted as a part of the wage determination (See 29 CFR 4.6(b)(2)(iii)).

Information required by the Regulations must be submitted on SF1444 or bond paper.

When preparing a conformance request, the "Service Contract Act Directory of Occupations" should be used to compare job definitions to ensure that duties requested are not performed by a classification already listed in the wage determination. Remember, it is not the job title, but the required tasks that determine whether a class is included in an established wage determination.

Conformances may not be used to artificially split, combine, or subdivide classifications listed in the wage determination (See 29 CFR 4.152(c)(1)).

** SERVICE CONTRACT ACT DIRECTORY OF OCCUPATIONS **

The duties of employees under job titles listed are those described in the "Service Contract Act Directory of Occupations", Fifth Edition (Revision 1), dated September 2015, unless otherwise indicated.

PAGE 15 OF 23 SB134118RQ0065001

Oil Cooled Job Plans

June 17, 2014 8:02:14 AM MDT

1 / 4

Job Plan List

Job Plan : CONTRACT

TRANSFOR

Description : Contract Transformer 5 year oil cooled

Task Sequence

Task Task Description Task Long Description

0 0 SAFETY SAFETY: WHEN TAKING VOLTAGE OR CURRENT MEASUREMENTS,

USE THE PROPER EQUIPMENT IN AN APPROVED MANNER.

0 1 OBTAIN PM Obtain PM from COR. The PM may be issued in a handheld device or paper.

0 3 SCHEDULE THE PM Schedule the PM with the COR. NO equipment will be shut down without scheduling with the COR.

0 5 REVIEW Review all steps in PM.

Review safety requirements for this equipment and space.

Review manufacturer's instructions and equipment history record, if available.

0 7 EQUIPMENT SHUTDOWN SAFETY If shut-down is necessary; de-energize, tag, and lock out electrical circuits to motors, pumps, control circuits, etc and de-energize pressure in lines before working on equipment. Ensure that the people affected have been notified (COR to notify) and associated equipment's operation will not be affected.

0 9 CHECK WITH OPERATING OR AREA PERSONNEL Check with operating or area personnel for any deficiencies.

0 10 CHECK AND RECORD SECONDARY VOLTAGE CHECK AND RECORD SECONDARY VOLTAGE OF TRANSFORMER

UNDER LOAD. READINGS SHOULD BE TAKEN BETWEEN PHASES

AND FROM PHASE TO NEUTRAL. RECORD THE TIME EACH

READING WAS TAKEN . WHEN TRANSFORMERS ARE CONNECTED

IN PARALLEL, THE SECONDARY VOLTAGES SHOULD BE EQUAL.

IF TRANSFORMER VOLTAGE APPEARS TO BE ABOVE OR BELOW AN

ACCEPTABLE LEVEL (115-120V). NOTIFY THE COR FOR APPROVAL

TO MAKE TAP CHANGES. MAKE THE NECESSARY ADJUSTMENTS

(TAP CHANGES) TO SET THE TRANSFORMER OUTPUT VOLTAGE AS

CLOSE TO THIS LEVEL AS POSSIBLE.

0 20 EXAMINE EXTERIOR EXAMINE EXERIOR OF THE TRANSFOMER FOR ANY DAMAGE,

CRACKS, RUST OR LEAKS. CHECK AROUND THE GASKETS, THE

PRESSURE RELIEF DEVICE AND THE COOLING FINS.

0 30 VISUAL AND MECHANICAL INSPECTION A: INSPECT FOR PHYSICAL DAMAGE, PROPER INSTALLATION, ANCHORAGE AND GROUNDING

B: CLEAN INTERIOR AND ALL BUSHING AND INSULATOR

PAGE 16 OF 23 SB134118RQ0065001

2 / 4

SURFACES AS APPLICABLE.

C: CHECK TIGHTNESS OF ACCESSIBLE BOLTED ELECTRICAL

JOINTS.

D: VERIFY PROPER AUXILIARY DEVICE OPERATION SUCH AS FANS,

PUMPS, SUDDEN PRESSURE DEVICE, INDICATORS,TAP

CHANGER,AND GAS PRESSURIZATION SYSTEM.

E: CHECK DIELECTRIC LIQUID IN TANK FOR PROPER LEVEL,

CHECK FOR ANY LEAKS

F: Perform infrared scan of each unit and record results.

RECORD AND REPORT RESULTS OF ALL TESTS.

0 40 ELECTRICAL TEST A: SAMPLE INSULATING OIL IN ACCORDANCE WITH ASTM-D-

923. SAMPLE WILL BE LABORATORY TESTED FOR:

1) DIELECTRIC STRENGTH

2) ACID NEUTRALIZATION NUMBER

3) INTERFACIAL TENSION

4) COLOR

5) PPM WATER

B: PERFORM DISSOLVED GAS ANALYSIS ON LIQUID DIELECTRIC.

RECORD AND REPORT ALL RESULTS OF TESTING to COR.

0 50 PARTIAL DISCHARGE TESTING OF MEDIUM VOLTAGE

CABLE

1) IT SHOULD BE NOTED THAT ALL MEASUREMENTS ARE

PERFORMED ON ENERGIZED CABLE, THEREFORE, NO DE-

ENERGIZATION OF " MV " CABLE WILL BE REQUIRED TO PERFORM

THIS TESTING. IT SHOULD BE FURTHER NOTED THAT ALL ON-

LINE PARTIAL DISCHARGE TESTING IS TO BE PERFORMED AS

NON-DESTRUCTIVE AND NON-INVASIVE.

2) AFTER THE DISCHARGES ARE MEASURED, THE RESULTS WILL

BE CATEGORIZED UTILIZING THE FOLLOWING CRITERIA.

CLASSIFICATION RESULT

RECOMMENDATION

A ( GREEN ) NO SIGNIFICANT PD NO ACTION

REQUIRED

PAGE 17 OF 23 SB134118RQ0065001

3 / 4

B (YELLOW) SIGNIFICANT PD RE-TEST IN 12-18

MONTHS

( WITHIN BASELINE FINDINGS)

C (RED) EXCESSIVE PD REPAIR/

REPLACE

CABLE/

COMPONENT

0 60 NETWORK PROTECTOR 60.1 - VISUAL AND MECHANICAL INSPECTION.

A) INSPECT RELAYS FOR PHYSICAL DAMAGE, PRESENCE OF

FOREIGN MATERIAL, MOISTURE, CONDITION OF SPIRAL SPRING,

DISC CLEARANCE AND CORROSION.

B) CLEAN COVER GLASS AND RELAY COMPONENTS AS

REQUIRED.

C) CHECK FOR FREEDOM OF MOVEMENT, PROPER TRAVEL AND

ALIGNMENT AND TIGHTNESS OF MOUNTING HARDWARE AND TAP

SCREWS.

60.2- ELECTRICAL TESTS.

A) PERFORM INSULATION RESISTANCE TEST ON EACH CIRCUIT

BRANCH TO FRAME.

B) PERFORM THE FOLLOWING TESTS AT THE SETTINGS

SPECIFIED BY CLIENT:

1) PICKUP PARAMETERS ON EACH OPERATING ELEMENT.

2) TIMING AT (3) POINTS ON TIME CHARACTERISTIC CURVE.

3) PICKUP TARGET AND SEAL-IN UNITS.

C) PERFORM FUNCTIONAL TEST TO ASSURE RELAY CONTACTS

TRIP THE ASSOCIATED BREAKER OR AUXILIARY DEVICE.

D) PERFORM PHASE ANGLE AND MAGNITUDE CONTRIBUTION

TESTS ON DIFFERENTIAL AND DIRECTIONAL TYPE RELAYS AFTER

ENERGIZATION TO VECTORIALLY PROVE PROPER POLARITY AND

CONNECTION.

RECORD AND REPORT ALL TEST RESULTS to COR.

0 70 TEST AND CHECK TRANSFORMER VAULT VENTILATION TEST AND SET TRANSFORMER VAULT FAN AND HIGH

TEMPERATURE LIMIT CONTROLS.

A. ROOM TEMPERATURE SETTING @70 DEG F OR 21 DEG C.

B. HIGH LIMIT (ALARM) @ 100 DEG F OR 37 DEG C.

PAGE 18 OF 23 SB134118RQ0065001

4 / 4

C. CHECK LOCAL ALARM FOR PROPER OPERATION.

0 80 SERVICE VAULT EXHAUST FAN CHECK TENSION, CONDITION AND ALIGNMENT OF BELTS, ADJUST

AS NECESSARY. LUBRICATE MOTOR/ PULLY ASSEMBLY, ON

VAULT FAN.

0 90 REPLACE FILTERS REPLACE INTAKE AIR FILTERS FOR VAULT.

0 100 CLEAN EXTERIOR TRANSFORMER CLEAN EXTERIOR OF TRANSFORMERS, SWITCHGEAR AND VAULT

FLOOR.

0 998 COMPLETE " NEW EQUIPMENT REPORT FORM" COMPLETE NEW EQUIPMENT REPORT FORM FOR DATA THAT

APPLIES TO THIS PIECE OF EQUIPMENT. SEE EXAMPLE FORM AND

CLASSIFICATION & ATTRIBUTE TABLES; PROVIDDED BY YOUR

COR

0 999 COMPLETE PM COMPLETE THE PM ON HANDHELD OR PAPER; NOTING

CONDITION, SUSPECT PROBLEMS, PARTS USED,GAUGE/ METER

READINGS, ETC.

NOTIFY COR IF ANY EQUIPMENT REQUIRES REPLACEMENT AND

NOTE ON PM.

Number of Records: 18

PAGE 19 OF 23 SB134118RQ0065001

June 17, 2014 7:59:38 AM MDT

1 / 3

Job Plan : CONT-JP

TRANSFORM

Description : Contract (Annual) Transformer oil cooled

Task Task Description Task Long Description

0 0 SAFETY SAFETY: WHEN TAKING VOLTAGE OR CURRENT MEASUREMENTS,

USE THE PROPER EQUIPMENT IN AN APPROVED MANNER.

0 1 OBTAIN PM Obtain PM from COR. The PM may be issued in a handheld device or paper.

0 3 SCHEDULE THE PM Schedule the PM with the COR. NO equipment will be shut down without scheduling with the COR.

0 5 REVIEW Review all steps in PM.

Review safety requirements for this equipment and space.

Review manufacturer's instructions and equipment history record, if available.

0 7 EQUIPMENT SHUTDOWN SAFETY If shut-down is necessary; de-energize, tag, and lock out electrical circuits to motors, pumps, control circuits, etc and de-energize pressure in lines before working on equipment. Ensure that the people affected have been notified (COR to notify) and associated equipment's operation will not be affected.

0 9 CHECK WITH OPERATING OR AREA PERSONNEL Check with operating or area personnel for any deficiencies.

0 10 CHECK AND RECORD SECONDARY VOLTAGE CHECK AND RECORD SECONDARY VOLTAGE OF TRANSFORMER

UNDER LOAD. READINGS SHOULD BE TAKEN BETWEEN PHASES

AND FROM PHASE TO NEUTRAL. RECORD THE TIME EACH

READING WAS TAKEN . WHEN TRANSFORMERS ARE CONNECTED

IN PARALLEL, THE SECONDARY VOLTAGES SHOULD BE EQUAL.

IF TRANSFORMER VOLTAGE APPEARS TO BE ABOVE OR BELOW AN

ACCEPTABLE LEVEL (115-120V). NOTIFY THE COR FOR APPROVAL

TO MAKE TAP CHANGES. MAKE THE NECESSARY ADJUSTMENTS

(TAP CHANGES) TO SET THE TRANSFORMER OUTPUT VOLTAGE AS

CLOSE TO THIS LEVEL AS POSSIBLE.

0 20 EXAMINE EXTERIOR EXAMINE EXERIOR OF THE TRANSFOMER FOR ANY DAMAGE,

CRACKS, RUST OR LEAKS. CHECK AROUND THE GASKETS, THE

PRESSURE RELIEF DEVICE AND THE COOLING FINS.

0 30 VISUAL AND MECHANICAL INSPECTION A: INSPECT FOR PHYSICAL DAMAGE, PROPER INSTALLATION, ANCHORAGE AND GROUNDING

B: CLEAN INTERIOR AND ALL BUSHING AND INSULATOR

PAGE 20 OF 23 SB134118RQ0065001

2 / 3

SURFACES AS APPLICABLE.

C: CHECK TIGHTNESS OF ACCESSIBLE BOLTED ELECTRICAL

JOINTS.

D: VERIFY PROPER AUXILIARY DEVICE OPERATION SUCH AS FANS,

PUMPS, SUDDEN PRESSURE DEVICE, INDICATORS,TAP

CHANGER,AND GAS PRESSURIZATION SYSTEM.

E: CHECK DIELECTRIC LIQUID IN TANK FOR PROPER LEVEL,

CHECK FOR ANY LEAKS

RECORD AND REPORT RESULTS OF ALL TEST.

0 65 NETWORK PROTECTOR VISUAL AND MECHANICAL INSPECTION.

A) INSPECT RELAYS FOR PHYSICAL DAMAGE, PRESENCE OF

FOREIGN MATERIAL, MOISTURE, CONDITION OF SPIRAL SPRING,

DISC CLEARANCE AND CORROSION.

B) CLEAN COVER GLASS AND RELAY COMPONENTS AS

REQUIRED.

C) CHECK ARM FOR FREEDOM OF MOVEMENT, PROPER

TRAVEL, ALIGNMENT AND TIGHTNESS OF MOUNTING HARDWARE

AND TAP SCREWS.

D) EXERCISE NETWORK PROTECTOR MANUALLY, ONE AT A

TIME, DEVICE SHOULD OPEN AND CLOSE QUICKLY WITH FREE

MOVEMENT

E) CHECK AND RECORD CURRENT TRIP SETTING AND TRIP

CYCLE COUNTER READING.

F) CHECK FOR PROPER ALARM ANNUNCIATION AT THE

NETWORK CONTROL PANEL IN MAIN TRANSFORMER VAULT AND

THE METASYS SYSTEM

RECORD AND REPORT ALL TEST RESULTS.

0 70 TEST AND CHECK TRANSFORMER VAULT VENTILATION TEST AND SET TRANSFORMER VAULT FAN AND HIGH

TEMPERATURE LIMIT CONTROLS.

A. ROOM TEMPERATURE SETTING @70 DEG F OR 21 DEG C.

B. HIGH LIMIT (ALARM) @ 100 DEG F OR 37 DEG C.

C. CHECK LOCAL ALARM FOR PROPER OPERATION.

0 80 SERVICE VAULT EXHAUST FAN CHECK TENSION, CONDITION AND ALIGNMENT OF BELTS, ADJUST

AS NECESSARY. LUBRICATE MOTOR/ PULLY ASSEMBLY, ON

VAULT FAN.

PAGE 21 OF 23 SB134118RQ0065001

3 / 3

0 90 REPLACE FILTERS REPLACE INTAKE AIR FILTERS FOR VAULT.

0 100 CLEAN EXTERIOR TRANSFORMER CLEAN EXTERIOR OF TRANSFORMERS, SWITCHGEAR AND VAULT

FLOOR.

0 999 COMPLETE PM COMPLETE THE PM ON HANDHELD OR PAPER; NOTING

Number of Records: 16

PAGE 22 OF 23 SB134118RQ0065001

January 23, 2015 1:17:20 PM MST

1 / 2

Job Plan : JP-XMR-CONT-S Description : TRANSFORMER SEMI- ANNUAL OIL COOLED

Task Task Description Task Long Description

0 0 SAFETY SAFETY: WHEN TAKING VOLTAGE OR CURRENT MEASUREMENTS,

USE THE PROPER EQUIPMENT IN AN APPROVED MANNER.

0 1 OBTAIN PM Obtain PM from COR. The PM may be issued in a handheld device or paper.

0 3 SCHEDULE THE PM Schedule the PM with the COR. NO equipment will be shut down without scheduling with the COR.

0 5 REVIEW Review all steps in PM.

Review safety requirements for this equipment and space.

Review manufacturer's instructions and equipment history record, if available.

0 7 EQUIPMENT SHUTDOWN SAFETY If shut-down is necessary; de-energize, tag, and lock out electrical circuits to motors, pumps, control circuits, etc and de-energize pressure in lines before working on equipment. Ensure that the people affected have been notified (COR to notify) and associated equipment's operation will not be affected.

0 9 CHECK WITH OPERATING OR AREA PERSONNEL Check with operating or area personnel for any deficiencies.

0 10 CHECK AND RECORD SECONDARY VOLTAGE CHECK AND RECORD SECONDARY VOLTAGE OF TRANSFORMER

UNDER LOAD. READINGS SHOULD BE TAKEN BETWEEN PHASES

AND FROM PHASE TO NEUTRAL. RECORD THE TIME EACH

READING WAS TAKEN . WHEN TRANSFORMERS ARE CONNECTED

IN PARALLEL, THE SECONDARY VOLTAGES SHOULD BE EQUAL.

IF TRANSFORMER VOLTAGE APPEARS TO BE ABOVE OR BELOW AN

ACCEPTABLE LEVEL (115-120V). NOTIFY THE COR FOR APPROVAL

TO MAKE TAP CHANGES. MAKE THE NECESSARY ADJUSTMENTS

(TAP CHANGES) TO SET THE TRANSFORMER OUTPUT VOLTAGE AS

CLOSE TO THIS LEVEL AS POSSIBLE.

0 20 EXAMINE EXTERIOR EXAMINE EXERIOR OF THE TRANSFOMER FOR ANY DAMAGE,

CRACKS, RUST OR LEAKS. CHECK AROUND THE GASKETS, THE

PRESSURE RELIEF DEVICE AND THE COOLING FINS.

0 65 NETWORK PROTECTOR VISUAL AND MECHANICAL INSPECTION.

A) INSPECT RELAYS FOR PHYSICAL DAMAGE, PRESENCE OF

FOREIGN MATERIAL, MOISTURE, CONDITION OF SPIRAL SPRING,

PAGE 23 OF 23 SB134118RQ0065001

January 23, 2015 1:17:20 PM MST

2 / 2

DISC CLEARANCE AND CORROSION.

B) CLEAN COVER GLASS AND RELAY COMPONENTS AS

REQUIRED.

C) CHECK ARM FOR FREEDOM OF MOVEMENT, PROPER

TRAVEL, ALIGNMENT AND TIGHTNESS OF MOUNTING HARDWARE

AND TAP SCREWS.

D) EXERCISE NETWORK PROTECTOR MANUALLY, ONE AT A

TIME, DEVICE SHOULD OPEN AND CLOSE QUICKLY WITH FREE

MOVEMENT

E) CHECK AND RECORD CURRENT TRIP SETTING AND TRIP

CYCLE COUNTER READING.

F) CHECK FOR PROPER ALARM ANNUNCIATION AT THE

NETWORK CONTROL PANEL IN MAIN TRANSFORMER VAULT AND

THE METASYS SYSTEM

RECORD AND REPORT ALL TEST RESULTS.

0 70 TEST AND CHECK TRANSFORMER VAULT VENTILATION TEST AND SET TRANSFORMER VAULT FAN AND HIGH

TEMPERATURE LIMIT CONTROLS.

A. ROOM TEMPERATURE SETTING @70 DEG F OR 21 DEG C.

B. HIGH LIMIT (ALARM) @ 100 DEG F OR 37 DEG C.

C. CHECK LOCAL ALARM FOR PROPER OPERATION.

0 80 SERVICE VAULT EXHAUST FAN CHECK TENSION, CONDITION AND ALIGNMENT OF BELTS, ADJUST

AS NECESSARY. LUBRICATE MOTOR/ PULLY ASSEMBLY, ON

VAULT FAN.

0 90 REPLACE FILTERS REPLACE INTAKE AIR FILTERS FOR VAULT.

0 100 CLEAN EXTERIOR TRANSFORMER CLEAN EXTERIOR OF TRANSFORMERS, SWITCHGEAR AND VAULT

FLOOR.

0 999 COMPLETE PM COMPLETE THE PM ON HANDHELD OR PAPER; NOTING

Number of Records: 14

Descript: The purpose of this amendment is to:

1) Replace the Wage Determination 2015-5415 Revision 5, dated 7/25/2017, with the Wage Determination 2015-5415 Revision 6, dated 12/26/2017.

...See Continuation Page

325 BROADWAY

BOULDER CO 80305-3328