SATPC0038127 Tab 04 4 SOW Revised.pdf
PDF 150 KB Posted
- Solicitation number
- 80NSSC25900855Q
About this file
This Statement of Work (SOW) outlines EV73's requirement for two specific pieces of sheet metal machinery to support human factors assessments for NASA at the MSFC facility in Redstone Arsenal, AL. The document details the technical specifications for a Sheet Metal Shear (BA9-1007100 SH-5210-60) and a Sheet Metal Break (BA9-1000403 BB-4810H-220V), both with hydraulic operation and precise material handling capabilities. The Shear has a 52" width with capacity for processing 10ga Mild Steel, 13ga Stainless Steel, and 7ga Aluminum, featuring three operational modes and a 24" adjustable back gauge. The Break offers a 48" bending width, can handle 10ga Steel, 12ga Stainless Steel, and 8ga Aluminum, with a bend angle range of 0-135 degrees and industrial-grade hydraulics for clean, precise motion. The period of performance extends from delivery and setup to the end of the equipment's operational life.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| SATPC0038127 Tab 07 Capability Statement SAM.gov.pdf | ||
| SATPC0038127 Tab 06 RDSS..pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
STATEMENT OF WORK
1. Objective/Requirements EV73 has a need to build noncritical hardware to support their efforts to complete human factors assessments. The full-scale models used in the assessments help bring to light potential issues with fitment and or access to assemble components. To meet schedule and keep cost down, having available machinery is key in achieving that effort. We may be at building 4649, 4650 and or 4705 supporting a project for NASA or a space act agreement partner. Having that access to the machinery at the locations we are working at saves time.
2. Characteristics, Scope, and Specs
The Sheet Metal Shear, BA9-1007100 SH-5210-60 Hyd. Powered Shear 10ga Cap shall at a minimum have following features and capabilities:
• Hydraulic operation
• A minimum shear width of 52”.
• A material capacity to meet or exceed.
o 10 ga Mild Steel maximum and 24 ga minimum.
o 13 ga Stainless Steel o 7 ga Aluminum
• 3 modes on the operator console: Inch mode: Jog the control and ease the blade down to the material, Single mode: Make one cut cycle per foot pedal push, and Auto mode: Continue cycling as you hold the pedal down.
• Front support arms and table guides keep the material square to the blade.
• Adjustable 24” back gauge ensures precise repeatability.
The Sheet Metal Break, BA9-1000403 BB-4810H-220V 3PH Hyd. Brake 4’x10ga shall at a minimum have following capabilities:
• Hydraulic operation
• Industrial-grade hydraulics lift the leaf for clean, precise motion.
• The minimum bending width od 48”.
• A material capacity to meet or exceed.
o 10 ga Steel o 12 ga Stainless Steel o 8 ga Aluminum
• A bend angle of 0 – 135 degrees.
• Adjustable bend auto-stop.
• Removable bending support lets you get closer between bends.
3. Place of Performance NASA, MSFC facility Redstone Arsenal, AL
4. Period of Performance Upon delivery and being set up for operation, to the end of its life.
File details come from the government source that posted it. Updated .