RFP CR-356355 Attachment A_Specifications.pdf
PDF 150 KB Posted
- Attached to
- FARM System
- Solicitation number
- CR-356355
About this file
This document is the Specifications Attachment A for Request for Proposal (RFP) CR-356355 issued by the Department of Energy Fermi National Accelerator Laboratory.
The RFP is for the procurement of 8 computer servers to be installed in Fermilab-supplied racks. The key technical specifications include a 1U rack chassis with hot-swap storage bays, dual AMD EPYC 9004 series 64-core/256-thread CPUs, 768GB of DDR5-4800 ECC memory, Broadcom RAID controller, and 2 x 960GB and 2 x 3.84TB solid-state drives. Networking requirements include 10GbE ports and a dedicated management port. The vendor is responsible for assembling, configuring, and testing the systems with the specified Alma/RHEL 9 operating system, as well as providing a 5-year parts and on-site labor warranty.
The related federal contract opportunity has a solicitation number of CR-356355 and is titled "FARM System" with an opportunity type of "Solicitation" for an alternate quantity of 40 systems. The procuring agency is the Department of Energy Fermi National Accelerator Laboratory.
View the file
Other files
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
RFP CR-356355
Atachment A – Specifica�ons
April 30, 2024
System and components installed in Fermilab supplied racks.
System Specifications:
• 1U Rack chassis
• Hot-swap Storage Bays
• 1+1 80Plus Platinum power supplies
• Dual AMD EPYC 9004 series 2.45GHz (or higher) 64 Cores/256 Threads
• Qty 24 Micron 32GB DDR5-4800 ECC RDIMM (768GB per Node)
• Broadcom MegaRAID 9540-8i - Storage controller (RAID)
• Qty 2 Micron 5400 PRO 960GB SATA/600 2.5" SSD - System Mirror RAID 1
• Qty 2 Micron 5400 PRO 3.84TB 2.5" SATA/600 SSD - Data Striped RAID 0
• Onboard 10GbE or 2 x Intel land ports
• Dedicated (ipmi) management port
• Assembly/Configuration/Testing with Alma/RHEL 9 O/S
• Five Year Parts Repair/Replacement with On-Site Labor Warranty
Fermi supplied rack and network patch panel 8 system ports and 1 management port for switch.
Rack Components and Configuration supplied/installed by vendor:
• 8 computer servers per rack:
o 1 Cat6A cable from each system connected to patch panel system port o 1 Cat6 cable connecting the Management Ethernet to the private switch o 1 C13-C14 Y cable of minimal length (load balancing is not possible)
• 2 APC AP7811 PDU’s
• 1 Ethernet switch with a minimum of 12 ports:
o 1 Cat6 cable from switch to patch panel management port o Managed switch not required but accepted with spanning tree disabled
• Cables:
o Must be labeled on both ends with system name (supplied) o Must be dressed properly to ensure no strain o Must not block the front-to-back airflow
• Rack layout requires approval, typical rack layout includes:
o Network switch top under patch panel o APC’s in middle o 4 systems over and under APC’s o All filler panels for unused spaces to maintain airflow mounted on front of rack
Must be black in color
Notes:
• Any partial racks should provide all necessary components.
• All unused components and packing materials must be removed by the vendor.
• All Installation personnel shall attend the required Employee Safety and Health policy before performing any work.
• Vendor shall provide any necessary personal protective equipment (PPE) as required.
• Vendor may deliver all equipment directly to Grid Computing Center on the day of installation.
File details come from the government source that posted it. Updated .