Redacted_SOW.pdf
PDF 157 KB Posted
- Attached to
- Allied Milling System
- Solicitation number
- N0017826Q6824
About this file
This is a Statement of Work (SOW) for the Naval Surface Warfare Center, Dahlgren Division (NSWCDD) requiring Allied High Tech Products, Inc. to provide an X-Prep® Precision Milling/Polishing System with associated equipment and three days of training services at the NSWCDD facility in Dahlgren, Virginia.
The contractor must deliver the following equipment and materials: one X-Prep® Precision Milling/Polishing System (100-125 V AC, 50/60 Hz, 1 Phase); one 3D Workflow Software Module; one 4" × 4" Flat Plate Fixture; three bottles of X-Lube Cutting-Grinding-Polishing Fluid (32 oz. each); and one Assortment Starter Tool/Consumables Kit. Training delivery requirements include three full days of instruction covering equipment review and calibration, specifications and validation review, and consumables proper use. Training must be conducted between 0700-1530 hours, Monday through Friday, excluding weekends and holidays. The contractor shall coordinate scheduling with the identified Technical Point of Contact (TPOC) to gain facility access. Travel is required for one person for three days to Dahlgren, Virginia, with all travel conducted in accordance with Federal Travel Regulations (FTR). Personnel traveling shall be limited to the minimum required to accomplish work requirements. The work is classified as unclassified, and the contractor must reference Original Equipment Manufacturer (OEM) Specifications as applicable documents.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Solicitation - N0017826Q6824.pdf | ||
| CLIN List.xlsx | XLSX spreadsheet |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
ALLIED MILLING SYSTEM
STATEMENT OF WORK (SOW)
1.0 BACKGROUND
The Naval Surface Warfare Center, Dahlgren Division (NSWCDD) requires a milling system and training services to be provided by Allied High Tech Products, Inc. to properly operate and service the X-Prep Milling Machine.
2.0 APPLICABLE DOCUMENTS
2.1 Original Equipment Manufacturer (OEM) Specifications
3.0 REQUIREMENTS
3.1 The Contractor shall provide the following Milling System and accessories:
Part Number Description Quantity
15-9650 X-Prep® Precision Milling/Polishing System, 100-125 V AC 50/60 Hz 1 Phase 1
15-9171 3D Workflow Software Module for X-Prep® 1 15-9142 Fixture for X-Prep®, 4" × 4" Flat Plate 1
15-92XL32 X-Lube, Cutting-Grinding-Polishing Fluid, 32 oz. (950 mL) 3 15-92ASSORT Assortment Starter Tool/Consumables Kit for X-Prep® 1
3.2 The Contractor shall provide personnel and materials to complete three (3) days of X- Prep® Training, part number TRAIN-X-DOM, on the X-Prep Milling Machine, located at the NSWCDD located in Dahlgren, Virginia.
3.2.1 Training shall include the following:
Review of Equipment and Calibration Review of Specifications and Validation Review of Consumables and proper use
3.2.2 The Contractor shall provide the training between the hours of 0700-1530, Monday through Friday, excluding weekends and holidays.
3.3 The Contractor shall coordinate with the Technical Point of Contact (TPOC) identified below to schedule the training services and to gain access to NSWCDD.
4.0 SECURITY
The work to be performed under this contract is unclassified.
File details come from the government source that posted it. Updated .