ATTACHMENT_R_IDIQ_Fixed_Price_Rate_Matrix__Revised_7-1-16_(003).pdf
PDF 359 KB Posted
- Attached to
- Facilities Construction Engineering and Technical Services Federal contract opportunity
- Solicitation number
- NNG16557109R
About this file
Attachment R
View the file
Other files for this federal contract opportunity
Show all 50
Facilities Construction Engineering and Technical Services has more files on GovTribe.
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
ATTACHMENT R
INDEFINITE DELIVERY INDEFINITE QUANTITY
(IDIQ)
FIXED PRICE RATES MATRIX
RFP NN16557109R
Contract TBD
Attachment R
(07/2016)
IDIQ FIXED PRICE RATES MATRIX
Task Plan proposals must utilize the not-to-exceed rates and factors delineated below for pricing all task orders contemplated or issued in accordance with the “Task Ordering
Procedure” and “Supplemental Task Ordering Procedures” clauses of the contract. All Task
Orders issued will be applied to the guaranteed minimum quantity and maximum quantity as provided in “Minimum/Maximum Amount of Supplies or Services” clause.
(a) PRICING FOR SERVICES TASK ORDERS (SOW 7.0A, 7.0C and 7.0D):
1. PRIME FULLY-LOADED DIRECT LABOR RATES (For All Services Task Orders):
The Prime Contractor shall not exceed the fully-loaded direct labor rates as specified below
(loaded through Profit) for pricing all services task orders (SOW 7.0A, 7.0C and 7.0D):
Program
Management and
Administrative
Direct Labor
Categories**
*CY 1
^HR Rate
CY 2
HR Rate
CY 3
HR Rate
CY 4
HR Rate
CY 5
HR Rate
Non-Management
Direct Labor
Categories
*CY 1
^HR Rate
CY 2
HR Rate
CY 3
HR Rate
CY 4
HR Rate
CY 5
HR Rate
A-E Services- Design Services – Senior Architect
A-E Services-
Architect
Senior Civil Engineer
Civil Engineer
(07/2016)
Non-Management
Direct Labor
Categories
*CY 1
^HR Rate
CY 2
HR Rate
CY 3
HR Rate
CY 4
HR Rate
CY 5
HR Rate
A-E Services- Design Services – Senior Mechanical
Mechanical
Plumbing Engineer
HVAC Engineer
Senior Electrical
Electrical Engineer
Senior Structural
Structural
Fire Protection
Environmental
Estimator
Specification Writer
(07/2016)
Non-Management
Direct Labor
Categories
*CY 1
^HR Rate
CY 2
HR Rate
CY 3
HR Rate
CY 4
HR Rate
CY 5
HR Rate
A-E Services- Design Services –
CADD/BIM
Technician
A-E Services-Eng & Tech Services – Senior Architect
Architect
Senior Civil
Civil Engineer
Senior Mechanical
Mechanical
Plumbing Engineer
HVAC Engineer
Senior Electrical
Electrical Engineer
Senior Structural
Structural
(07/2016)
Non-Management
Direct Labor
Categories
*CY 1
^HR Rate
CY 2
HR Rate
CY 3
HR Rate
CY 4
HR Rate
CY 5
HR Rate
A-E Services-Eng & Tech Services – Fire Protection
Environmental
Estimator
Specification Writer
Planning Services- Master Planning– Senior Planner
Space Survey Services – CADD
Space Survey Services – Senior Systems Analyst
Directorate Planning – Senior Planner
Scheduling – Scheduler
Information Resources Services –
Services – CADD
(07/2016)
Non-Management
Direct Labor
Categories
*CY 1
^HR Rate
CY 2
HR Rate
CY 3
HR Rate
CY 4
HR Rate
CY 5
HR Rate
Information Resources Services – Senior Systems Analyst
Services – Senior Programmer Analyst
**Program Management and Administrative Direct Labor Categories - The Offeror shall provide Program Management and Administrative direct labor categories in accordance with the Offeror’s Program Management and Administrative Position Descriptions in Section (c) of this attachment.
*CY = Contract Year
^HR = Hourly Rate: These are not-to-exceed, fully-loaded rates to be used for services task order pricing purposes only. The Contractor may propose lower rates when pricing services task orders.
2. PRIME COST ESTIMATING RELATIONSHIPS (FOR DERIVING OTHER DIRECT
COSTS (ODCS)), AND INDIRECT RATES & PROFIT PERCENTAGE TO BE APPLIED
AGAINST ODCs:
When proposing Other Direct Costs (ODCs) under a services task order, the Prime Contractor shall not exceed the following cost estimating relationships (CERs) rates or factors for deriving recurring ODCs, indirect rates applied against ODCs, and profit percentage applied against
ODCs for pricing all services task orders:
Cost Estimating Relationships (CERs):
The Prime Contractor shall not exceed the CER rates or factors as specified below for deriving/pricing ODCs, if applicable, on all services task orders:
****CERs Base of
Application
CY 1 CY 2 CY 3 CY 4 CY 5
(07/2016)
**** CERs – If applicable, the Offeror shall complete all Prime ODC categories and rates/factors that are proposed using a CER, such as management percentages or computer/IT expense. Clearly delineate the base of application. If not applicable, insert “NONE”.
Indirect Rates:
The Prime Contractor shall not exceed the following indirect rates applied against ODCs, if applicable, for pricing all services task orders:
***Indirect
Rate Categories
Applied Against
ODCs
Base of
***Indirect Rate Categories – If applicable, the Offeror shall complete all Prime indirect rate categories and rates that may be applied against the ODCs proposed under a services task order in accordance with the contractor’s accounting and estimating procedures. Clearly delineate the base of application. If not applicable, insert “NONE”.
Profit:
The Prime Contractor shall not exceed the following profit rate applied against ODCs, if applicable, for pricing all services task orders:
*****Profit
Percentage
Applied Against
ODCs
Base of
*****Profit Percentage – If applicable, the Offeror shall complete the Prime’s profit percentage that may be applied against the ODCs proposed under a task order in accordance with the contractor’s accounting and estimating procedures. Clearly delineate the base of application.
If not applicable, insert NONE.
(b) PRICING FOR CONSTRUCTION SERVICES TASK ORDERS (SOW 7.0B):
1. PRIME CONSTRUCTION/DESIGN-BUILD COEFFICIENTS
The Prime Contractor shall apply the appropriate current year coefficient below to the
RSMeans extended construction when pricing construction task orders and formal design
(07/2016) phase Engineering Estimates of Construction (EEC) in accordance with the Statement of
Work:
Design-Build Minimum Design Coefficients
Project Value CY 1 CY 2 CY 3 CY 4 CY 5
$0 to $15K
>$15K to $100K
>$100K
Design-Build Full Design Coefficients
$0 to $15K
Design-Bid-Build Construction Only Coefficients
$0 to $15K
Offerors shall propose Construction/Design-Build Coefficients above, to be used with pricing construction/design-build task orders in accordance with the Statement of Work.
2. PRIME ADMIN 1 PRE-PRICED WORK LINE ITEMS:
When pricing Design-Build Minimum Design task orders with a value less than or equal to
$100K, the Prime Contractor shall use the following current year Admin 1 pre-priced work line item unit prices in accordance with the Statement of Work:
Label Description* Unit*
CY 1
Unit
Price**
CY 2
Unit
Price
CY 3
Unit
Price
CY 4
Unit
Price
CY 5
Unit
Price
A-1
Remove/Abate Vinyl-Asbestos Floor Tile
(up to 200 SF) – includes removal of VAT and mastic and all other Construction
Specifications SECTION 13285 and GPR
1840.1 requirements pertaining to VAT abatement, including containment. Price does not include carpet removal.
SF
A-2
Remove/Abate Vinyl-Asbestos Floor Tile
(over 200 SF) – includes removal of VAT and mastic and all other Construction
Specifications SECTION 13285 and GPR
1840.1 requirements pertaining to VAT abatement, including containment. Price does not include carpet removal.
SF
A-3 Remove/Abate Vinyl-Asbestos Floor Tile SF
Unit
Price**
CY 2
Unit
Price
CY 3
Unit
Price
CY 4
Unit
Price
CY 5
Unit
Price
(up to 200 SF) – includes removal of VAT and mastic and all other Construction
Specifications SECTION 13285 and GPR
1840.1 requirements pertaining to VAT abatement. Does not include containment.
Price does not include carpet removal.
A-4
Remove/Abate Vinyl-Asbestos Floor Tile
(over 200 SF) – includes removal of VAT and mastic and all other Construction
Specifications SECTION 13285 and GPR
1840.1 requirements pertaining to VAT abatement. Does not include containment.
Price does not include carpet removal.
SF
A-5
Remove/Abate Vinyl-Asbestos Floor Tile and Carpet (up to 200 SF) – includes removal of VAT and mastic and all other
Construction Specifications SECTION
13285 and GPR 1840.1 requirements pertaining to VAT abatement, including containment. Assumes carpet is adhered to tile.
SF
A-6
Remove/Abate Vinyl-Asbestos Floor Tile and Carpet (over 200 SF) – includes removal of VAT and mastic and all other
Construction Specifications SECTION
13285 and GPR 1840.1 requirements pertaining to VAT abatement, including containment. Assumes carpet is adhered to tile.
SF
A-7
Remove/Abate Vinyl-Asbestos Floor Tile and Carpet (up to 200 SF) – includes removal of VAT and mastic and all other
Construction Specifications SECTION
13285 and GPR 1840.1 requirements pertaining to VAT abatement. Does not include containment. Assumes carpet is adhered to tile.
A-8
Remove/Abate Vinyl-Asbestos Floor Tile and Carpet (over 200 SF) – includes removal of VAT and mastic and all other
Construction Specifications SECTION
13285 and GPR 1840.1 requirements pertaining to VAT abatement. Does not include containment. Assumes carpet is adhered to tile.
SF
A-9
Industrial Hygienist, per day, IAW
Construction Specifications SECTION
13285 and GPR 1840.1 requirements pertaining to VAT abatement.
DY
A-10 Certified Industrial Hygienist, per day, IAW Construction Specifications
DY
Unit
Price**
CY 2
Unit
Price
CY 3
Unit
Price
CY 4
Unit
Price
CY 5
Unit
Price
SECTION 13285 and GPR 1840.1 requirements pertaining to VAT abatement.
A-11
Waste Disposal, per job, IAW Construction
Specifications SECTION 13285 and GPR
1840.1 requirements pertaining to VAT abatement.
JB
A-12 Remove Vinyl Composition Tile – remove tile and adhesive.
SF
A-13 F/I VCT – includes subfloor preparation when required.
SF
A-14
Flash Patch Floor – entails application of leveling grout and final cleaning for new
VCT or carpet. Assumes project size of
400sf or larger, otherwise productivity adjustment.
SF
A-15
Perform Testing of Concrete for Moisture
Content – moisture testing is required before installing Carpet Floor Tile.
SF
A-16 Remove Carpet – remove carpet and adhesive.
SF
A-17 F/I Carpet Floor Tile. SF
A-18
Remove and Reinstall Raised Access Floor
Panels – entails one-time removal and replacement only. Light furniture relocation included. Heavy equipment and furniture by others.
A-19 Remove Cove Base. LF
A-20 F/I Cove Base. LF
A-21 Remove Wall Shelf & Patch Wall – includes patching holes left by anchors.
SF
A-22 Demo Metal Partition cover plate. SF
A-23
Demo CMU Wall – not cut-out demo. No toothing. Assumes full wall sections at least
10’ long. Includes dust protection.
CY
A-24 Demo Stud Wall – includes saw cutting if necessary.
SF
A-25
Stud/Drywall Partition – includes constructing stud wall, drywall, taping, spackling, and finishing; excludes insulation.
SF
A-26
Skim Coat Patch Drywall – assumes entire wall needs refinishing. Includes applying durabond and Lafarge compound skim coats.
SF
A-27
Prepare and Paint Walls – includes repairing any minor imperfections, sanding, and painting with 1 coat primer and 2 coats latex.
SF
A-28
F/I 1/4" drywall over existing wall -includes adhesive or mechanical fasteners and preparation for painting.
Unit
Price**
CY 2
Unit
Price
CY 3
Unit
Price
CY 4
Unit
Price
CY 5
Unit
Price
A-29
F/I Room Signs – includes Hermes #723-
087 frame with header and 3-lines. Only room number tag is included.
EA
A-30
Wall Penetrations up to 4" in diameter – used for conduit or pipe wall penetrations through masonry or partition walls. Core drilling through concrete not included. Fire caulk not included.
EA
A-31
Fire Caulk Penetration up to 4" in diameter
– fire caulk only. Does not include special fire penetration assemblies.
EA
A-32 Demo Door and Frame – as part of wall demo or part of door replacement.
EA
A-33
F/I Wood Door and Frame (3’x7’) – includes caulking, door stop, hinges, and lockset.
A-34
F/I Wood Door & Frame (6’x7’) – no cut-out or jamb work included. No finishing included. Not fire rated. Not an egress door.
EA
A-35 F/I Red Oak Door & Frame (3’x7’) – installed door with frame and hardware.
EA
A-36
F/I Metal Door and Frame (3’x7’) – includes caulking, door stop, hinges, and lockset.
EA
A-37
Paint Door and Frame – includes sanding and painting with 1 coat primer and 2 coats latex.
EA
A-38
Paint Door and Half-Leaf and Frame – includes sanding and painting with 1 coat primer and 2 coats latex.
EA
A-39 Paint Induction Units – prep surface, 1 coat primer and 2 finish coats.
EA
A-40 Prime and Paint Wiremold – prep surface, 1 coat primer and 2 finish coats.
LF
A-41
Remove and Reinstall Acoustic Ceiling Tile
– removal and reinstallation of same tiles.
Includes new tiles where breakage occurs.
SF
A-42 Remove and Replace Ceiling Tile – includes 2’x2’ tile and 2’x4’ tile.
SF
A-43 Demo Suspended Ceiling – removal of ceiling grid, suspension system and tiles.
SF
A-44
F/I Ceiling Grid and Tile – includes support attachments, suspension system, grid and tiles (2’x2’ or 2’x4’).
SF
A-45
F/I Handicapped Door Opener - per
Construction Specifications SECTION 08
71 00 requirements - includes push buttons, door opening device, and provision of electrical power.
EA
E-1 Remove/Blank Floor Stack – includes the removal of electrical/telephone floor stack
Unit
Price**
CY 2
Unit
Price
CY 3
Unit
Price
CY 4
Unit
Price
CY 5
Unit
Price and the installation of a blank cover plate.
Remove wire back to nearest junction box
(50 LF).
E-2
F/I Light Switch – including wiring, conduit
(including fittings, connectors, hangers, offsets, bends, etc.), box, wall plate, and wall plate identification label. Includes up to 50 LF of wiring and conduit.
EA
E-3
F/I Receptacle – includes wiring, conduit
(including fittings, connectors, hangers, offsets, bends, etc.), box, wall plate, and wall plate identification label. Includes up to 50 LF of wiring and conduit (to panelboard). Update panelboard schedule.
EA
E-4
F/I Receptacle – includes wiring, conduit
(including fittings, connectors, hangers, offsets, bends, etc.), box, wall plate, and wall plate identification label. Includes up to 10 LF of wiring and conduit (to existing receptacle / junction box).
EA
E-5
F/I Wire/Conduit for Lighting and
Receptacle Circuits (10 LF) – includes wire and conduit (including fittings, hangers, offsets, etc). Wire and conduit size - 3#12, ¾" EMT.
EA
E-6
F/I Wire/Conduit for Lighting and
Receptacle Circuits (25 LF) – includes wire and conduit (including fittings, hangers, offsets, etc). Wire and conduit size - 3#12, ¾" EMT.
EA
E-7
F/I Wire/Conduit for Lighting and
Receptacle Circuits (50 LF) – includes wire and conduit (including fittings, hangers, offsets, etc). Wire and conduit size - 3#12, ¾" EMT.
EA
E-8
Remove Existing Lights – includes the removal of interior 2’ x 4’ fluorescent fixtures, wiring, and conduit back to nearest
JB (10 LF).
EA
E-9
F/I New Lights – includes 2’ x 4’, 2 lamp, parabolic, recessed fluorescent fixture
(Lithonia catalog # 2PMO G B 232 27LS
MVOLT GEB10IS or equal), fixture supports, wire and conduit (including fittings, hangers, offsets, bends, etc.).
Includes up to 6 LF of MC cable for connection to nearest junction box. Update panelboard schedule.
E-10
Same as E-9 except for light fixture type.
Provide 2’ x 4’, 3 lamp, parabolic, recessed fluorescent fixture (Lithonia catalog # #
Unit
Price**
CY 2
Unit
Price
CY 3
Unit
Price
CY 4
Unit
Price
CY 5
Unit
Price
2PMO G B 332 27LS MVOLT 1/3
GEB10IS or equal).
E-11
Same as E-9 except for light fixture type.
Provide 2’ x 4’, 2 lamp, recessed fluorescent fixture (Lithonia catalog # 2SP
G 232 A12125 MVOLT GEB10IS or equal).
EA
E-12
Same as E-9 except for light fixture type.
Provide 2’ x 4’, 3 lamp, recessed fluorescent fixture (Lithonia catalog # 2SP
G 332 A12125 MVOLT 1/3 GEB10IS or equal).
EA
E-13
Same as E-9 except for light fixture type.
Provide 2’ x 4’, 2 lamp, recessed fluorescent fixture (Lithonia catalog # 2AV
G 232 MDR MVOLT GEB10IS or equal).
EA
E-14
Same as E-9 except for light fixture type.
Provide 2’ x 4’, 3 lamp, recessed fluorescent fixture (Lithonia catalog # 2AV
G 332 MDR MVOLT GEB10IS or equal).
EA
E-15
Same as E-9 except for light fixture type.
Provide 2’ x 4’, 7200 lumens LED recessed fixture (Lithonia catalog # 2GTL4 72L EZ1
LP40 or equal).
EA
E-16
Same as E-9 except for light fixture type.
Provide 2’ x 4’, 5000 lumens LED recessed fixture (Lithonia catalog # 2AVL4 50L
MDR EZ1 LP40 or equal).
EA
E-17
Same as E-9 except for light fixture type.
Provide 2’ x 4’, 7200 lumens LED recessed fixture (Lithonia catalog # 2RTL4 72L EZ1
LP40 or equal).
E-18
F/I Ceiling Mounted Motion Sensors
(Lighting Control) – includes motion sensor
(WattStopper W500A or equal), power pack, and all required wire and conduit.
Includes up to 10 LF of power wiring/conduit and up to 50 LF of control wiring (from power pack to sensor).
EA
E-19 F/I 700 Wiremold – includes wiremold (10
LF), box, wall plate, connector, and fittings.
EA
E-20
F/I New Receptacle using Wiremold – includes wire, and wall plate identification label.
EA
E-21
F/I New Light Switch using Wiremold – includes wire, and wall plate identification label.
EA
E-22
F/I Power/LAN Floor Box – entails a complete installation including core drill floor penetration, conduit, drilling, anchors, water control, etc.
Unit
Price**
CY 2
Unit
Price
CY 3
Unit
Price
CY 4
Unit
Price
CY 5
Unit
Price
E-23
Remove Power/LAN Floor Box – entails a complete removal of box, conduit, wire and patching the floor.
EA
E-24
Remove Receptacle – entails complete removal back to nearest junction box. Not to exceed 10’. Trace circuit.
EA
E-25 Remove Wiremold (700) (per 10’) – includes demo of wire and receptacles.
EA
E-26
Remove 4000 Wiremold – entails removal of raceway, wire and receptacles to nearest wall or cut-off point, cap end.
LF
E-27
Remove 6000 Wiremold – entails removal of raceway, wire and receptacles to nearest wall. Cap end.
LF
E-28 Demo Wire/Conduit (per 10’) – includes hangers and straps.
EA
E-29
Remove Circuit Breakers 20-90A 1P – includes blank cover plate and re-label.
Does not include lock out/tag out or R&R panel cover.
EA
E-30
Remove Circuit Breakers 20-100A 2P – includes blank cover plate and re-label.
Does not include lock out/tag out or R&R panel cover.
E-31
Remove Circuit Breakers 20-100A 3P – includes blank cover plate and re-label.
Does not include lock out/tag out or R&R panel cover.
EA
E-32
Remove Underfloor Quads (30’ sealtite) – includes removal of conduit and wire from power source and relabeling.
EA
E-33
Remove/Blank-off Telephone Floor Stacks
– includes removal of conduit and wire to nearest J-box. Blank off with floor inserts.
EA
E-34
F/I Underfloor Quads (30’ sealtite) – includes circuit breaker, ¾" sealtite, #12 wire from power source to underfloor location. Includes KO’s, connectors, terms, boxes, covers, receptacles. Does not include lock out/tag out or R&R panel cover.
EA
E-35
Add for Dimmable Ballast – additive price to Admin 1 items E-7, E-8, E-9, E-10, E-
11, E-12 if dimmable light specified. Does not apply to 4-lamp fixtures. Does not apply to refitting existing fixtures with dimmable ballasts.
EA
E-36
Demo Wall Switch – includes removal of conduit/wire back to J-box and wall patching.
F-1 Drain/Refill Sprinkler System – includes EA
Unit
Price**
CY 2
Unit
Price
CY 3
Unit
Price
CY 4
Unit
Price
CY 5
Unit
Price submitting a sprinkler outage request.
F-2
Demo Sprinkler Head – includes removal of head, pipe hangers and ceiling tile replace.
EA
F-3
Update Sprinkler Head – involves replacement with a new head at the same location. Includes pipe modifications, escutcheons, ceiling tile.
EA
F-4
Relocate Sprinkler Head – includes piping, anchoring, hangers, escutcheons, ceiling tile. Maximum distance is 5' -0" in one direction (left, right, straight, or down) from the original location of the sprinkler head elbow down turn.
F-5
F/I New Sprinkler Head – includes tap, up to 15’ of pipe and a complete installation through painting of pipe and ceiling tile work. Up to 15 feet high.
EA
F-6 Demo Smoke Detector/TRI – includes removal of conduit/wire back to J-box.
EA
F-7 Demo Motion Sensor – includes removal of conduit/wire back to j-box.
EA
M-1
Demo Metal Pipe up to 2" – includes removal of hangers and capping of pipe.
Bare non-insulated pipe only.
LF
M-2
Remove and Reinstall Ceiling Diffusers – includes disconnection, removal, storage, and reinstallation of diffusers. Up to 15’ height in its same location.
EA
M-3
Relocate Ceiling Diffusers – same scope as item M-2 but reinstallation at a different location, and includes up to 5’ of flex duct.
EA
M-4 F/I 24"x24" Ceiling Diffusers – includes up to 5’ flex duct. Balancing not included.
EA
M-5 Demo Pneumatic T-Stat – includes line capping.
EA
M-6
F/I Pneumatic T-Stat – entails complete installation including cutting drywall through calibration. Maximum distance to main air is 20 linear feet.
EA
M-7
Relocate Pneumatic T-Stat – entails complete removal and reinstallation, including cutting drywall through calibration. Maximum relocation distance
20 linear feet.
*Acronyms and Abbreviations for the Admin 1 Work Line Items are in Contract Attachment
A, Statement of Work.
(07/2016)
**Offerors shall propose Admin 1 Pre-Priced Work Line Items unit prices above, to be used with pricing Design-Build Minimum Design task orders with a value less than or equal to
$100K in accordance with the Statement of Work.
(c) POSITION DESCRIPTIONS FOR SERVICES DIRECT LABOR CATEGORIES IN
SECTION (a)1 (SOW 7.0A, 7.0C and 7.0D):
Program Management and Administrative Direct Labor Position Descriptions*
Position Title Duties Education Experience
*A Position Description shall be provided for each individual Offeror-Proposed Program
Management and Administrative Direct Labor Category included in Section (a)1.
Non-Management Direct Labor Position Descriptions
Position Title Duties Education Experience
A-E Services- Design Services – Senior Architect
Has full technical and project management responsibility for designated projects. Can serve as an in-house technical consultant. Experienced in a wide-range of complex applications of the stated specialty and supervises others to ensure that the tasks are completed on time and within budget.
4-year architecture degree from an accredited college or university.
Professional Engineer’s license or other applicable professional registration.
Registration/licensure shall be recognized by the Maryland Department of Licensing and Regulation.
10+ years of related work experience.
A-E Services- Design Services – Architect
Performs a wide variety of engineering or architectural assignments by applying architectural/engineering techniques and analyses.
Assignments may involve CAE (computer aided engineering)/CADD (computer aided drafting and design) applications.
4-year architecture degree from an accredited college or university.
4 to 10 years of related work experience.
A-E Services- Design Services –
Has full technical and project management
4-year engineering degree from an
10+ years of related work
(07/2016)
Non-Management Direct Labor Position Descriptions
Position Title Duties Education Experience
Senior Civil Engineer responsibility for designated projects. Can serve as an in-house technical consultant. Experienced in a wide-range of complex applications of the stated specialty and supervises others to ensure that the tasks are completed on time and within budget.
accredited college or university.
Professional Engineer’s license or other applicable professional registration.
Registration/licensure shall be recognized by the Maryland Department of Licensing and Regulation.
experience.
A-E Services- Design Services – Civil Engineer
Performs a wide variety of engineering or architectural assignments by applying architectural/engineering techniques and analyses.
Assignments may involve CAE (computer aided engineering)/CADD (computer aided drafting and design) applications.
4-year engineering degree from an accredited college or university.
4 to 10 years of related work experience.
A-E Services- Design Services – Senior Mechanical Engineer
Has full technical and project management responsibility for designated projects. Can serve as an in-house technical consultant. Experienced in a wide-range of complex applications of the stated specialty and supervises others to ensure that the tasks are completed on time and within budget.
4-year engineering degree from an accredited college or university.
Professional Engineer’s license or other applicable professional registration.
Registration/licensure shall be recognized by the Maryland Department of Licensing and Regulation.
10+ years of related work experience.
A-E Services- Design Services – Mechanical Engineer
Performs a wide variety of engineering or architectural assignments by applying architectural/engineering techniques and analyses.
Assignments may involve CAE (computer aided engineering)/CADD (computer aided drafting and design) applications.
4-year engineering degree from an accredited college or university.
4 to 10 years of related work experience.
A-E Services- Performs a wide variety of 4-year engineering 4 to 10 years of
(07/2016)
Non-Management Direct Labor Position Descriptions
Position Title Duties Education Experience
Design Services – Plumbing Engineer engineering or architectural assignments by applying architectural/engineering techniques and analyses.
Assignments may involve CAE (computer aided engineering)/CADD (computer aided drafting and design) applications.
degree from an accredited college or university.
related work experience.
A-E Services- Design Services – HVAC Engineer
Performs a wide variety of engineering or architectural assignments by applying architectural/engineering techniques and analyses.
Assignments may involve CAE (computer aided engineering)/CADD (computer aided drafting and design) applications.
4-year engineering degree from an accredited college or university.
4 to 10 years of related work experience.
A-E Services- Design Services – Senior Electrical Engineer
Has full technical and project management responsibility for designated projects. Can serve as an in-house technical consultant. Experienced in a wide-range of complex applications of the stated specialty and supervises others to ensure that the tasks are completed on time and within budget.
4-year engineering degree from an accredited college or university.
Professional Engineer’s license or other applicable professional registration.
Registration/licensure shall be recognized by the Maryland Department of Licensing and Regulation.
10+ years of related work experience.
A-E Services- Design Services – Electrical Engineer
Performs a wide variety of engineering or architectural assignments by applying architectural/engineering techniques and analyses.
Assignments may involve CAE (computer aided engineering)/CADD (computer aided drafting and design) applications.
4-year engineering degree from an accredited college or university.
4 to 10 years of related work experience.
A-E Services- Design Services – Senior Structural Engineer
Has full technical and project management responsibility for designated projects. Can serve as an in-house technical
4-year engineering degree from an accredited college or university.
Professional
10+ years of
(07/2016)
Non-Management Direct Labor Position Descriptions
Position Title Duties Education Experience consultant. Experienced in a wide-range of complex applications of the stated specialty and supervises others to ensure that the tasks are completed on time and within budget.
Engineer’s license or other applicable professional registration.
Registration/licensure shall be recognized by the Maryland Department of Licensing and Regulation.
A-E Services- Design Services – Structural Engineer
Performs a wide variety of engineering or architectural assignments by applying architectural/engineering techniques and analyses.
Assignments may involve CAE (computer aided engineering)/CADD (computer aided drafting and design) applications.
4-year engineering degree from an accredited college or university.
4 to 10 years of related work experience.
A-E Services- Design Services – Fire Protection Engineer
Performs a wide variety of engineering or architectural assignments by applying architectural/engineering techniques and analyses.
Assignments may involve CAE (computer aided engineering)/CADD (computer aided drafting and design) applications.
4-year engineering degree from an accredited college or university.
4 to 10 years of related work experience.
A-E Services- Design Services – Environmental Engineer
Performs a wide variety of engineering or architectural assignments by applying architectural/engineering techniques and analyses.
Assignments may involve CAE (computer aided engineering)/CADD (computer aided drafting and design) applications.
4-year engineering degree from an accredited college or university.
4 to 10 years of related work experience.
A-E Services- Design Services – Estimator
Executes a wide variety of estimating activities for projects.
4-year degree in engineering or construction management (or related field) and 4 years of related experience.
10+ years of related work experience.
A-E Services- Design Services –
Provides technical writing function for engineering
College degree preferred, but not
4 years of experience writing
(07/2016)
Non-Management Direct Labor Position Descriptions
Position Title Duties Education Experience
Specification Writer specifications, user manuals, monthly reports, engineering studies, etc.
required. engineering documentation.
A-E Services- Design Services –
CADD/BIM
Technician
Prepares complex drawings or original designs that require a high degree of precision; performs difficult assignments requiring initiative, resourcefulness, and drafting expertise with minimum supervision.
Assures that anticipated problems in manufacture, assembly, installation, and operation are resolved by the drawing(s) produced.
Familiar with using Global Positioning System (GPS) equipment.
4-year degree. 5 years of related work experience using 2D AutoCAD and 3D Revit applications, and
GPS
A-E Services-Eng & Tech Services – Senior Architect
Has full technical and project management responsibility for designated projects. Can serve as an in-house technical consultant. Experienced in a wide-range of complex applications of the stated specialty and supervises others to ensure that the tasks are completed on time and within budget.
4-year architecture degree from an accredited college or university.
Professional Engineer’s license or other applicable professional registration.
Registration/licensure shall be recognized by the Maryland Department of Licensing and Regulation.
10+ years of related work experience.
A-E Services-Eng & Tech Services – Architect
Performs a wide variety of engineering or architectural assignments by applying architectural/engineering techniques and analyses.
Assignments may involve CAE (computer aided engineering)/CADD (computer aided drafting and design) applications.
4-year architecture degree from an accredited college or university.
4 to 10 years of related work experience.
A-E Services-Eng & Tech Services – Senior Civil Engineer
Has full technical and project management responsibility for designated projects. Can serve as an in-house technical
4-year engineering degree from an accredited college or university.
Professional
10+ years of
(07/2016)
Non-Management Direct Labor Position Descriptions
Position Title Duties Education Experience consultant. Experienced in a wide-range of complex applications of the stated specialty and supervises others to ensure that the tasks are completed on time and within budget.
Engineer’s license or other applicable professional registration.
Registration/licensure shall be recognized by the Maryland Department of Licensing and Regulation.
A-E Services-Eng & Tech Services – Civil Engineer
Performs a wide variety of engineering or architectural assignments by applying architectural/engineering techniques and analyses.
Assignments may involve CAE (computer aided engineering)/CADD (computer aided drafting and design) applications.
4-year engineering degree from an accredited college or university.
4 to 10 years of related work experience.
A-E Services-Eng & Tech Services – Senior Mechanical Engineer
Has full technical and project management responsibility for designated projects. Can serve as an in-house technical consultant. Experienced in a wide-range of complex applications of the stated specialty and supervises others to ensure that the tasks are completed on time and within budget.
4-year engineering degree from an accredited college or university.
Professional Engineer’s license or other applicable professional registration.
Registration/licensure shall be recognized by the Maryland Department of Licensing and Regulation.
10+ years of related work experience.
A-E Services-Eng & Tech Services – Mechanical Engineer
Performs a wide variety of engineering or architectural assignments by applying architectural/engineering techniques and analyses.
Assignments may involve CAE (computer aided engineering)/CADD (computer aided drafting and design) applications.
4-year engineering degree from an accredited college or university.
4 to 10 years of related work experience.
A-E Services-Eng & Tech Services – Plumbing Engineer
Performs a wide variety of engineering or architectural assignments by applying architectural/engineering
4-year engineering degree from an accredited college or university.
4 to 10 years of
(07/2016)
Non-Management Direct Labor Position Descriptions
Position Title Duties Education Experience techniques and analyses.
Assignments may involve CAE (computer aided engineering)/CADD (computer aided drafting and design) applications.
A-E Services-Eng & Tech Services – HVAC Engineer
Performs a wide variety of engineering or architectural assignments by applying architectural/engineering techniques and analyses.
Assignments may involve CAE (computer aided engineering)/CADD (computer aided drafting and design) applications.
4-year engineering degree from an accredited college or university.
4 to 10 years of related work experience.
A-E Services-Eng & Tech Services – Senior Electrical Engineer
Has full technical and project management responsibility for designated projects. Can serve as an in-house technical consultant. Experienced in a wide-range of complex applications of the stated specialty and supervises others to ensure that the tasks are completed on time and within budget.
4-year engineering degree from an accredited college or university.
Professional Engineer’s license or other applicable professional registration.
Registration/licensure shall be recognized by the Maryland Department of Licensing and Regulation.
10+ years of related work experience.
A-E Services-Eng & Tech Services – Electrical Engineer
Performs a wide variety of engineering or architectural assignments by applying architectural/engineering techniques and analyses.
Assignments may involve CAE (computer aided engineering)/CADD (computer aided drafting and design) applications.
4-year engineering degree from an accredited college or university.
4 to 10 years of related work experience.
A-E Services-Eng & Tech Services – Senior Structural Engineer
Has full technical and project management responsibility for designated projects. Can serve as an in-house technical consultant. Experienced in a wide-range of complex applications of the stated
4-year engineering degree from an accredited college or university.
Professional Engineer’s license or other applicable professional
10+ years of
(07/2016)
Non-Management Direct Labor Position Descriptions
Position Title Duties Education Experience specialty and supervises others to ensure that the tasks are completed on time and within budget.
registration.
Registration/licensure shall be recognized by the Maryland Department of Licensing and Regulation.
A-E Services-Eng & Tech Services – Structural Engineer
Performs a wide variety of engineering or architectural assignments by applying architectural/engineering techniques and analyses.
Assignments may involve CAE (computer aided engineering)/CADD (computer aided drafting and design) applications.
4-year engineering degree from an accredited college or university.
4 to 10 years of related work experience.
A-E Services-Eng & Tech Services – Fire Protection Engineer
Performs a wide variety of engineering or architectural assignments by applying architectural/engineering techniques and analyses.
Assignments may involve CAE (computer aided engineering)/CADD (computer aided drafting and design) applications.
4-year engineering degree from an accredited college or university.
4 to 10 years of related work experience.
A-E Services-Eng & Tech Services – Environmental Engineer
Performs a wide variety of engineering or architectural assignments by applying architectural/engineering techniques and analyses.
Assignments may involve CAE (computer aided engineering)/CADD (computer aided drafting and design) applications.
4-year engineering degree from an accredited college or university.
4 to 10 years of related work experience.
A-E Services-Eng & Tech Services – Estimator
Executes a wide variety of estimating activities for projects.
4-year degree in engineering or construction management (or related field) and 4 years of related experience.
10+ years of related work experience.
A-E Services-Eng & Tech Services – Specification Writer
Provides technical writing function for engineering specifications, user manuals, monthly reports, engineering studies, etc.
College degree preferred, but not required.
4 years of experience writing engineering documentation.
(07/2016)
Non-Management Direct Labor Position Descriptions
Position Title Duties Education Experience
A-E Services-Eng & Tech Services –
CADD/BIM
Technician
Prepares complex drawings or original designs that require a high degree of precision; performs difficult assignments requiring initiative, resourcefulness, and drafting expertise with minimum supervision.
Assures that anticipated problems in manufacture, assembly, installation, and operation are resolved by the drawing(s) produced.
Familiar with using Global Positioning System (GPS) equipment.
4-year degree in engineering or computer science.
5 years of related work experience using 2D AutoCAD and 3D Revit applications, and
GPS.
Planning Services- Master Planning– Senior Planner
Organizes and coordinates the planning and development of project execution, direct project feasibility studies, plan scope definition, project procedures, budgets, and schedules utilizing Code 220 Facilities Management Division (FMD) Planning Procedural Guidance.
Works with a diverse group of engineers, architects, scientists, technicians, and administrative personnel to identify customer needs and develop suitable solutions that comply with Agency programs and regulations in order to meet specified goals and deadlines.
Communicates FMD policies, purposes, and goals to customers and stakeholder organizations quickly and accurately in a responsive, supportive manner.
Presents planned facility projects in senior Center-level forums such as the GSFC Facility Review Committee (FRC) as well as
4-year engineering or architectural degree.
A minimum of 10 years of related experience.
Documented experience of prior successes in managing projects, and/or programs relevant to facilities management.
Experience in planning projects for office/ administrative spaces, technical spaces (i.e.
laboratories, cleanrooms, hospitals, payload processing, launch facilities, shops) and operations facilities.
Excellent interpersonal and communication skills (both oral and written).
Experience with utilizing cost estimating tools such as RSMeans;
design tools such
(07/2016)
Non-Management Direct Labor Position Descriptions
Position Title Duties Education Experience to Agency-level officials (NASA Headquarters) in support of senior managers to effectively compete for project funding in multiple programs.
as AutoCAD; space and asset management tools such as ARCHIBUS and MAXIMO; office tools such as the Microsoft Office Suite (Word, Excel, PowerPoint, etc.);
and life cycle economic analysis tools such as
ECONPACK.
Planning Services- Space Survey Services – CADD Technician
Surveys all sites/buildings/ rooms as specified by the Government. Inputs applicable field data into
ARCHIBUS.
4-year engineering or computer science degree.
5 years of related work experience using 2D AutoCad applications, and GPS and ESRI
GIS.
Planning Services- Space Survey Services – Senior Systems Analyst
Compiles and processes inputted ARCHIBUS data.
Provides inaccurate personnel data to the Government and generates facilities data reports.
4-year engineering or computer science degree.
8 years of experience in the administration of commercial software products
MAXIMO,
ARCHIBUS, and Primavera Contract Manager. Familiar with working with Microsoft Windows Server 2012 and Oracle databases.
Planning Services- Directorate Planning
– Senior Planner
Organizes and coordinates the planning and development of directorate project execution, direct project feasibility studies, plan scope definition, project procedures, budgets, and schedules utilizing Code 220 Facilities Management Division (FMD) Planning Procedural Guidance.
Works with a diverse group of engineers, architects, scientists, technicians, and administrative personnel to
4-year engineering or computer science degree.
A minimum of 10 years of related experience.
Documented experience of prior successes in managing projects, and/or programs relevant to facilities management.
Experience in planning projects for office/administrative spaces, technical spaces (i.e.
(07/2016)
Non-Management Direct Labor Position Descriptions
Position Title Duties Education Experience identify customer needs and develop suitable solutions that comply with Agency programs and regulations in order to meet specified goals and deadlines.
Communicates FMD policies, purposes, and goals to customers and stakeholder organizations quickly and accurately in a responsive, supportive manner.
Presents planned facility projects in senior Center-level forums such as the GSFC Facility Review Committee (FRC) as well as to Agency-level officials (NASA Headquarters) in support of senior managers to effectively compete for project funding in multiple programs.
laboratories, cleanrooms, hospitals, payload processing, launch facilities, shops) and operations facilities. Excellent interpersonal and communication skills (both oral and written).
Experience with utilizing cost estimating tools such as RSMeans;
design tools such as AutoCAD; space and asset management tools such as ARCHIBUS and MAXIMO; office tools such as the Microsoft Office Suite (Word, Excel, PowerPoint, etc.);
and life cycle economic analysis tools such as
ECONPACK.
Planning Services- Scheduling – Scheduler
Creates, maintains and controls cost and resource loaded schedules for critical facilities projects.
Analyzes and presents schedule information:
Identifies project milestones and activities necessary to achieve project objectives.
Identifies and documents schedule and programmatic interdependencies among project activities and related external projects. Gathers project and program status information and updates schedules, and performs schedule analysis to determine overall project
College degree preferred, but not required.
Relevant facilities experience and a full understanding of activity definition, activity sequence, activity resource estimating, activity duration estimating, schedule development, and schedule control.
A fundamental grasp of all principles of project management.
Proficient in the use of scheduling software such as Primavera, (07/2016)
Non-Management Direct Labor Position Descriptions
Position Title Duties Education Experience performance, variances and risk areas, providing “what-if” scenarios, and work-around and recovery plans.
Microsoft Project, and Milestone Professional, and Microsoft Office applications such as Outlook, Word, Excel, and PowerPoint.
Strong interpersonal and communication skills (both oral and written).
Information Resources Services
– CADD/BIM
Resources Services
– CADD Technician
Prepares complex drawings or original designs that require a high degree of precision; performs difficult assignments requiring initiative, resourcefulness, and drafting expertise with minimum supervision.
Assures that anticipated problems in manufacture, assembly, installation, and operation are resolved by the drawing(s) produced.
Familiar with using Global Positioning System (GPS) equipment. Designs and develops GIS databases, site maps and advanced queries. Capable of taking client requests and designing solutions using GIS data and mapping.
Manipulates GIS data in response to customer information requests.
Performs GIS software upgrades and patches.
Troubleshoots processing anomalies and takes corrective action. Develops customized processes, maps, and reports.
4-year degree in engineering or computer science.
5 years of related work experience using 2D AutoCAD and 3D Revit applications, and GPS and ESRI
GIS.
(07/2016)
Non-Management Direct Labor Position Descriptions
Position Title Duties Education Experience
Provides user support and training on the specific software product.
Coordinates upgrades and patches with Oracle Data Base Administrator.
Familiar with using GPS equipment.
Information Resources Services – Senior Systems Analyst
Administrator(s) for facilities Commercial Off The Shelf (COTS) software products MAXIMO, ARCHIBUS and Primavera Contract Manager. Performs software upgrades and patches. Troubleshoots processing anomalies and takes corrective action.
Develops customized processes and reports.
Provides user support and training on the specific software products.
Coordinates upgrades and patches with Oracle Data Base Administrator.
4-year degree in computer science or information systems.
8 years of experience in the administration of commercial software products
MAXIMO,
ARCHIBUS, and Primavera Contract Manager. Familiar with working with Microsoft Windows Server 2012 and Oracle databases.
Information Resources Services – Senior Programmer Analyst
Develops WEB applications, interfaces, and databases using Microsoft.NET and SQL Server development and design tools for use in Internet/Intranet web sites.
Provides web site development, design, support, and maintenance.
4-year degree in computer science or information systems.
5 years of related experience using Microsoft.NET and SQL Server Reporting software tools for WEB development.
File details come from the government source that posted it. Updated .