13-R-0050 RFP Amd 0001.pdf

1XXXXXXXXX

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. NAME AND TITLE OF SIGNER (Type or print)

30-105-04EXCEPTION TO SF 30

APPROVED BY OIRM 11-84

STANDARD FORM 30 (Rev. 10-83) Prescribed by GSA

FAR (48 CFR) 53.243

The purpose of this amendment is to update the SOW, Attachments, and extend closing date as show n here in.

1. CONTRACT ID CODE PAGE OF PAGES

U 1 9

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

16C. DATE SIGNED

BY 13-Aug-2013

16B. UNITED STATES OF AMERICA15C. DATE SIGNED15B. CONTRACTOR/OFFEROR

(Signature of Contracting Officer)(Signature of person authorized to sign)

8. NAME AND ADDRESS OF CONTRACTOR (No., Street, County, State and Zip Code) X N68936-13-R-0050

X 9B. DATED (SEE ITEM 11)

22-Jul-2013

10B. DATED (SEE ITEM 13)

9A. AMENDMENT OF SOLICITATION NO.

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

X The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offer X is extended, is not extended.

Offer must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended by one of the following methods:

(a) By completing Items 8 and 15, and returning 1 copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN

REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. ACCOUNTING AND APPROPRIATION DATA (If required)

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE

CONTRACT ORDER NO. IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation date, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(B).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

E. IMPORTANT: Contractor is not, is required to sign this document and return copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

10A. MOD. OF CONTRACT/ORDER NO.

2. AMENDMENT/MODIFICATION NO. 5. PROJECT NO.(If applicable)

6. ISSUED BY

3. EFFECTIVE DATE

13-Aug-2013

CODE

CDR NAWCWD CODE 254100D

ATTN: H. FROHLICH

(760) 939-7301

429 E BOWEN RD. STOP 4015

CHINA LAKE CA 93555

N68936 7. ADMINISTERED BY (If other than item 6)

4. REQUISITION/PURCHASE REQ. NO.

CODE

See Item 6

FACILITY CODECODE

EMAIL:TEL:

N68936-13-R-0050

SECTION SF 30 BLOCK 14 CONTINUATION PAGE

The following items are applicable to this modification:

MODIFICATION SUMMARY OF CHANGE

SUMMARY OF CHANGES

SECTION A - SOLICITATION/CONTRACT FORM

The required response date/time has changed from 21-Aug-2013 03:00 PM to 27-Aug-

2013 03:00 PM.

SECTION C - DESCRIPTIONS AND SPECIFICATIONS

The following have been modified:

STATEMENT OF WORK

STATEMENT OF WORK

ADVANCED TECHNOLOGY INSERTION AND INTEGRATION

FOR WEAPON SYSTEMS DEVELOPED BY RAYTHEON MISSILE SYSTEMS

5 August 2013

1.0 BACKGROUND

The mission of the Naval Air Warfare Center Weapons Division (NAWCWD) is to provide our Armed Forces with effective and affordable integrated warfare systems and life-cycle support to ensure battlespace dominance.

NAWCWD performs Research, Development, Test and Evaluation (RDT&E), software integration, interoperability, modeling and simulation, and supports Network Centric Warfare for guided missiles, complex and advanced weapons and weapon systems. NAWCWD performs RDT&E and in-service support for guided missiles, free-fall weapons, targets, support equipment, crew systems, electronic warfare and integrates weapons and avionics on tactical aircraft. NAWCWD operates the Navy’s western land and sea range test and evaluation complex; and develops and applies new technology to ensure battlespace dominance.

1.1 SCOPE

1.1.1 This RDT&E acquisition covers design, development and studies to develop and apply new technology to ensure battlespace dominance utilizing systems developed and produced by Raytheon Missile Systems such as AIM- 9 Sidewinder, AIM-120 AMRAAM, AGM-65 Maverick, AGM-154 JSOW, R/UGM-109 Tomahawk, XM982 Excalibur, BGM-71 TOW, Standard Missile and Evolved Sea Sparrow Missile, Line of Sight/Non-Line of Sight (LOS/N-LOS) technologies for seekers, tri-mode seekers, and similar applications. Tasking will include technology demonstration efforts, product improvement initiatives, technology insertion and transition activities, and integration of various warfare systems, and will include mission analysis, mission architecture, participate in Concept of Operations (CONOPS) development, and military utility analysis. The Naval Air Systems Command (NAVAIR) Research and Engineering Group, AIR 4.0, is the technical lead agent for this contract.

1.1.2 This statement of work describes the technical requirements in the following general areas:

(a) Studies and evaluations of research, design, development, production, and operations including effectiveness analysis, design adequacy, and related engineering activities, utilizing systems developed and produced by Raytheon Missile Systems.

(b) Planning, preparing for, performing, analyzing and documenting results of units under test utilizing systems developed and produced by Raytheon Missile Systems.

(c) Transfer of new technology from concept to fleet introduction utilizing systems developed and produced by Raytheon Missile Systems.

2.0 APPLICABLE DOCUMENTS

DoD 5220.22-M National Industrial Security Program Operating Manual (NISPOM), CH-1, March 28, 2013 per DoDM 5200.01, Information Security Program Manual.

DoD 5400.7-R Freedom of Information Act Regulation (FOIA)

2.1 GENERAL. Standard requirement documents (Government and Industry Specifications and Standards), reference texts, specific design requirements, and other references will be defined by individual Task Order (TO).

2.1.1 The Government will provide all necessary reference documents not generally available to the contractor when required in individual task orders. Throughout the life of the contract, if any instruction or document is replaced or superseded, the replacement or superseding instruction or document shall be applicable to these requirements only as defined by individual task orders.

2.2 SPECIFICATIONS AND STANDARDS. National and international standards are fundamental to the acceptable performance of this requirement. American National Standards Institute (ANSI) and International Standards Organization (ISO) standards may be invoked under individual task orders. All commercially available hardware and software to be acquired by the contractor in response to a Government requirement shall comply with the appropriate standards specified in the task order. Additional standards and specifications with a variety of origins, and Department of Defense (DoD) standards will be utilized to the extent necessary to promote maximum utility, flexibility and economy.

3.0 REQUIREMENTS

The following paragraphs describe technical task areas to be performed by the contractor. Work to be performed, required data deliverables, and applicable governing documents shall be specifically described in task orders to be issued by the Contracting Officer and shall be within the parameters of one or more of the tasks listed below. This work may be performed on assigned systems, subsystems, equipment and components. The contractor shall provide a Contractor’s Monthly Progress, Status and Management report that shows planned expenditures over the life of the contract and task orders, comparing planned to actual expenditures. Technical tasking progress shall be summarized to include accomplishments, compliance to schedules, issues, problems, and risks to completion of the contract and task orders effort. (CDRL A001)

3.1 DESIGN AND DEVELOPMENT. The contractor shall provide design, design review, and analysis, as defined by the following requirements:

3.1.1 Design Development and Review

3.1.1.1 The contractor shall develop designs; fabricate technology demonstrators, prototypes and/or mock-ups;

modify original designs; identify and complete design validation testing. The contractor shall prepare technical data packages of systems, subsystems, equipment, and components unique to the contractor’s products. (CDRL A002)

3.1.1.2 The contractor shall review and evaluate designs provided as Government Furnished Information (GFI) to establish compliance with mission and other specified requirements. The following are examples of required reviews and evaluations to be performed: analyses to identify potential impacts on performance, reliability, maintainability, user interface, logistics, schedule, and cost.

3.1.1.3 The contractor shall perform integration, verification, and validation reviews of systems, equipment, assemblies, or modules to ensure that these items perform as specified by individual design specifications. The contractor shall provide a written evaluation of the design or design changes along with rationale after completing the analysis. (CDRL A003)

3.1.2 Design Analyses

3.1.2.1 The contractor shall perform design analyses and studies for systems development, production, and in-service activities. The following are examples of design analyses and studies required for systems development, production, and in-service activities: mission analysis, mission architecture, participation in CONOPS development, and military utility analysis.

3.1.2.2 The contractor shall evaluate procedures, processes, designs, and design changes for cost savings. The contractor shall deliver to the Government a design disclosure Technical Data Package including details concerning the substitution of piece parts and requirements concerning equivalency (exact reproductions). (CDRL A002)

3.1.2.3 The contractor shall produce technology demonstrators, prototypes and/or mock-ups of hardware resulting from reverse engineering of legacy systems they have lost technical capacity to build as new. (CDRL A003)

3.1.3 Operation Research

3.1.3.1 The contractor shall construct, modify and/or perform statistical and/or analytical investigations of, and with, mathematical simulation models.

3.1.3.2 The contractor shall conduct aerodynamic modeling, tactics investigation through simulation, establishment of optimization techniques, control system analysis, derivation of decision theories, development of inventory control models, conducting probability and statistical theories, and provide independent analytical assessments of systems and components.

3.1.3.3 The contractor shall provide automated analysis tools, such as decision support systems. The contractor shall correlate decision support applicability and its ability to support current needs and requirements. (CDRL A003)

3.1.4 Field Engineering and Analyses

3.1.4.1 The contractor shall participate in planning, organizing, and attending on-site working sessions in the Fleet for purposes of system performance improvement. The contractor shall perform analyses of system performance through an assessment of data generated during fleet operations, maintenance, testing, trials, or training exercises.

3.1.4.2 The contractor shall perform field engineering tasks related to maintaining and enhancing deployed development equipment in accordance with the equipment's operational specifications or improved specifications.

The contractor shall perform system or equipment alterations in accordance with the applicable installation specifications, guidelines and alteration instructions. The contractor shall conduct the associated operational verification tests to assure the operational integrity of the system or equipment.

3.1.4.3 The contractor shall identify existing Government sources of information, collect available maintenance data, edit and analyze this data, identify trends or problems affecting mission requirements, and submit recommendations with associated rationale for changes to design or maintenance requirements to improve availability and performance. The contractor shall investigate failures of components and systems failures to isolate the causative defect and recommend possible corrective actions to the Government. (CDRL A003)

3.1.5 Chemical Analyses

3.1.5.1 The contractor shall plan, execute, analyze, interpret and report the results of chemical investigations. These may include research and design of thermodynamics, energy transfer phenomena, solid-state mechanisms, molecular dynamics, kinetics, spectroscopy of energetic reactions, molecular synthesis, environmental studies, metallurgical analysis, or other chemical properties. (CDRL A003)

3.1.6 Physics Analyses

3.1.6.1 The contractor shall plan, execute, analyze, interpret and report the results of investigations on such items as the design of missile seeker performance, kinetics, ballistics, atmospheric optics, smoke modeling, radiation transfer, light scattering, electro-optics and geometrical and physical optics. (CDRL A003)

3.1.7 Electromagnetic Analyses

3.1.7.1 The contractor shall perform and document analyses, studies, and testing concerning the areas of Electromagnetic Interference (EMI), Electromagnetic Compatibility (EMC), and Electromagnetic Pulse (EMP). The contractor shall provide reports with rationale for any assumptions made during the preparation of these reports.

The following are examples of engineering investigations to be performed: mechanical and electronic packaging technology, mechanical and thermal modeling, item packaging and mounting technologies, component design and integration, system, subsystem, equipment and component testing (electronic and mechanical), EMC control plans, EMC test plans/test reports. (CDRL A004)

3.1.8 Environmental Analysis

3.1.8.1The contractor shall prepare, conduct analysis, and review environmental impact statements and assessments on any new products developed and delivered to the Government. The contractor shall provide written reports which shall include findings, assumptions and recommendations. (CDRL A003)

3.1.9 Production Analyses

3.1.9.1 The contractor shall provide estimates of potential technology insertion and technology transition production costs for Raytheon products. The contractor shall develop, prepare, assemble, validate, review, analyze, assess, and deliver the following to the Government for technology insertion and technology transition efforts: (1) Engineering Change Proposals (ECPs); (2) recommendations on any new Raytheon Missile Systems technological developments and product improvement initiatives; (3) recommendations on technology insertion and transition activities; and (4) recommendations on integration of various warfare systems on Raytheon products with rationale for ECPs and Technical Directives (TDs). (CDRLs A005 and A006)

3.1.10 Technology Studies

3.1.10.1 The contractor shall perform analyses and conduct technical studies related to research and development of potential technology insertion and technology transition efforts and test and evaluation technologies. The contractor shall report the results of such investigations along with recommendations and the basis for those recommendations.

(CDRL A003)

3.1.10.2 The contractor shall survey advanced technology approaches to similar problems both in Government and the private sector and document recommendations. The contractor shall report the results of such investigations along with recommendations and the basis for those recommendations. (CDRL A003)

3.1.10.3 The contractor shall identify manufacturers of, and the availability and suitability, of Commercial Off-the- Shelf (COTS) equipment required from second and third tier vendors to implement promising improvements. The contractor shall perform engineering investigations to evaluate COTS item reliability, maintainability, availability, supportability, and configuration status in accordance with applicable drawing specifications, configuration documents, and other applicable documentation. The contractor shall report the results of such investigations along with recommendations and the basis for those recommendations. (CDRL A003)

3.1.11 Human Factors

3.1.11.1 The contractor shall prepare, evaluate, and annotate human factors program plans, analysis reports, test plans and procedures, and other human factors related documentation. The contractor shall attend human factors reviews, demonstrations, testing, and mockup or model reviews. The contractor shall record discrepancies and formulate recommendations for resolution. (CDRL A007)

3.2 TEST AND EVALUATION. The contractor shall provide test articles, fixtures, and instrumentation. The contractor shall participate in test planning, performance, data analysis, and development of documentation as defined by the following requirements.

3.2.1 Test Plans and Procedures

3.2.1.1 The contractor shall provide pre- and post-test simulations of expected system performance in test scenarios.

The contractor shall develop test exercise geometry and constraints necessary to implement test scenarios. The contractor shall develop or evaluate and provide comments on test plans and procedures. The contractor shall submit an evaluation report on the adequacy of such plans and provide rationale and assumptions. The contractor shall provide inputs to detailed test procedures implementing test plan requirements. (CDRL A008)

3.2.2 Test and Test Support.

3.2.2.1 The contractor shall conduct tests to investigate technical approaches, verify interface interoperability, and evaluate technical performance under controlled conditions and in representative operational environments. (CDRL A009)

3.2.2.2 The contractor shall plan, coordinate and perform test and evaluation of completed hardware designs. The contractor shall provide test articles, test fixtures, instrumentation. The contractor shall participate in test events, telemetry, operations and maintenance activities. The contractor shall perform data capture and data retrieval in association with test activities. (A008, A009)

3.2.2.3 The contractor shall attend tests performed at both Government and private test sites to review the appropriate test requirements provide analytical evaluations during testing and procedures, monitor the test being conducted, and document the test. (CDRL A009)

3.2.3 Test Analyses and Reports

3.2.3.1 The contractor shall review test data and perform analyses of the performance of units under test. The contractor shall formulate recommendations, with justification, to correct any test item performance, quality, maintenance, or problems impacting mission.

3.2.3.2 The contractor shall recommend improvements, with justification, to design, configuration, materials, or construction. The contractor shall collect test data and documents, review test documents, and prepare and publish test documents and reports. The contractor shall evaluate test report content and recommend changes with rationale.

(CDRL A009)

3.3 TRANSITION ENGINEERING. The contractor shall provide transition engineering from initial development through LRIP, installation, interim fleet support, and training for the transition of development systems, commodities, technology demonstrators, prototypes, mock-ups, and items as defined by the following requirements.

3.3.1 Technology Demonstrators, Prototypes, and Mock-Ups Production

3.3.1.1 The contractor shall produce technology demonstrators, prototypes, mock-ups and developmental items in accordance with the authorization and specification package.

3.3.2 Installation Requirements

3.3.2.1 The contractor shall identify and document installation requirements to ensure system compatibility. The contractor shall identify and provide recommended solutions to interface problems; review and monitor system tolerances; perform system tests to assess performance, safety, operability, reliability and maintainability; for impact on systems interface. The contractor shall perform checks in accordance with installation drawings and specifications in preparation for installation of new equipment. The contractor shall be responsible for site planning and preparation for equipment installation. The contractor shall perform the installation of new equipment in accordance with the applicable installation drawings and procedures. The contractor shall conduct associated operational verification tests to assure operational integrity of the installed equipment. (CDRL A00A)

3.3.3 Interim Engineering Analysis

3.3.3.1 The contractor shall provide systems engineering analysis for development, pre-production, prototype, and Low Rate Initial Production (LRIP) equipment or components, production material, and modification kits during development and deployment. The Contractor shall perform systems or equipment modifications to validate engineering/design recommendations or changes. The contractor shall conduct the associated operational verification tests to assure the operational integrity of the system or equipment. The contractor shall review, evaluate, maintain, and update data and associated documentation on fielded systems, subsystems, and components.

The contractor shall provide and assist with inactivation and disposal to ensure that critical equipment removed is safeguarded and destroyed in accordance with the appropriate Government instructions and directives.

(CDRL A00A)

4.0 Deliverables

CDRL Description A001 Contractor’s Monthly Progress, Status and Management

Report A002 Technical Data Package A003 Technical Report-Study/Services- Design Engineering &

Review Reports, Chemical Analyses Reports, Physics Analysis Reports, Environmental Services Reports, Technology Support Reports

A004 Electromagnetic Interference Test Report (EMITR) A005 Engineering Change Proposal (ECP) A006 Notice of Revision (NOR) A007 Human Engineering Program Plan A008 Test Plans/ Test Procedures A009 Technical Report-Study/Services; Test Analyses &

Reports A00A Installation Test Report/ Support Documentation

5.0 TRAVEL

The contractor shall be required to perform non-local travel for the tasking defined in this SOW. Non-local and OCONUS travel may be required.

6.0 SECURITY

The Contractor shall provide personnel with the appropriate security clearance levels for the work to be performed.

Access to TOP SECRET information is required in the performance of this contract. The Contractor shall implement and maintain security procedures and controls to prevent unauthorized disclosure of controlled unclassified and classified information and to control distribution of controlled unclassified and classified information in accordance with the DoD 5220.22-M National Industrial Security Program Operating Manual (NISPOM), CH-1, March 28, 2013 and DoDM 5200.01, Information Security Program Manual. The DoD Contract Security Classification Specification, DD Form 254, Attachment 1, defines program specific security requirements. All controlled unclassified technical information shall be appropriately identified and marked as For Official Use Only in accordance with DoDM 5200.01 (Information Security Program Manual) (Volume 4) and DoD 5400.7-R (Freedom of Information Act Regulation) (Chapter 3). All Contractor facilities shall provide an appropriate means of storage for controlled unclassified and classified documents, equipment, and materials in accordance with Operational Security (OPSEC) requirements.

For Official Use Only information generated and/or provided under this contract shall be marked and safeguarded as specified in DoDM 5200.01, Information Security Program Manual (Volume 4) available at http://www.dtic.mil/whs/directives/corres/pdf/520001_vol4.pdf and DoD 5400.7-R, Freedom of Information Program Chapter 3 (pages 31-42) available at http://www.dtic.mil/whs/directives/corres/pdf/540007r.pdf.

All controlled unclassified technical information shall be appropriately identified and marked with the following distribution statement(s):

Distribution Statement B: Distribution authorized to US Government agencies only; administrative or operational use; 31 August 2000. Other requests for the document shall be referred to NAVAIR WD Code 400000D, 1900 N.

Knox Road, MS 6305 Attn: COR, China Lake, CA 93555-6106.

OPSEC and any OPSEC CDRL requirements will be addressed at the task order level and on each task level DD Form 254 as required. A DD254 is required for all individual orders for each platform when classified work is to be performed and, in this case, the contract level DD254 will be attached to the IDIQ contract. A Program Protection Implementation Plan (PPIP) is required for each individual order when Critical Program Information (CPI) is used to meet the requirements of an order. In this case the OPSEC Plan is part of the PPIP. The appropriate task level government technical point of contact will be responsible for providing the Program Protection Plan (PPP) to the contractor. Prior to the release of a Request for Proposal (RFP) for a individual order under this IDIQ contract, the Government shall determine if an existing Contractor Operation Security (OPSEC) plan or program and/or Program Protection Implementation Plan (PPIP) requires modification in order to comply with the Department of Defense (DoD) Security requirements summarized below. If the Government deems that a modification is required to the existing Contractor’s OPSEC plan(s) or program and/or PPIP(s), the Government shall identify such requirements in the statement of work for an individual order. If the Government deems that modifications to the existing Contractor’s OPSEC plan(s) or program and/or PPIP(s) are required, the Government shall state that in the statement of work for an individual order.

Operation Security (OPSEC): The Contractor is required to provide Operations Security (OPSEC) protection for all classified information (as defined by FAR 4.402); and sensitive and technical information (as defined in Title 15, United States Code Section 278g-3 (d)(4)). Security policy, procedures and requirements for information are provided by DOD Manual 5220.22-M "National Industrial Security Program Operating Manual (NISPOM)." Use OPNAVINST 3432.1a and National Security Decision Directive (NSDD) 298 for the concept of OPSEC and apply the framework for telecommunications security in Defense Federal Acquisition Regulations Supplement (DFARS) Clause 252.239-7016, as appropriate. The Contractor shall apply and use Distribution Statements following the provisions of Exhibit 8A, SECNAV M-5510.36

Program Protection Implementation Plan (PPIP): The Contractors Program Protection Implementation shall be defined within the Contractors PPIP, and is a result of the program protection requirements set forth in the DD-254 DoD Contract Security Classification Specification; DoDD 5000.01 the Defense Acquisition System; DoDI 5000.02 Operation of the Defense Acquisition System, The DoD Acquisition Guidebook, DoDI 5200.39 Critical Program

Information (CPI) Protection Within the Department of Defense, DoD 5205.02-M DoD Operations Security (OPSEC) Program, DoDI 8500.2 Information Assurance (IA) Implementation, and the Governments Platform Specific Program Protection Plan (PPP) (including Annexes)) most current issuance. PPP and any PPP CDRL requirements will be addressed at the task order level and on each task level DD Form 254 as required. The appropriate task level government technical point of contact will be responsible for providing the Program Protection Plan (PPP) to the contractor.

The PPIP shall be used as a focal point for the Contractors Program Security. The PPIP is derived from the PPP and should not restate what is written in the PPP but simply state “how” the contractor will implement Program Protection

The contractor is responsible for implementation of the OPSEC/Program Protection requirements for individual delivery orders. The contractor is responsible for levying the OPSEC/Program Protection requirements for individual delivery orders on subcontractors where applicable.

7.0 Quality Assurance

The Contractor shall ensure that all requirements of the Statement of Work are monitored for quality and timeliness.

The following have been added by full text:

SECTION J

DOCUMENT TYPE DESCRIPTION PAGES DATE

Exhibit A* CDRLs 10 31-JUL-2013 Attachment 1 DD 254 4 30-JUL-2013

*To be provided under separate cover

(End of Summary of Changes)