SOW HYDRAULIC TEST PUMP STAND.docx

FLEET READINESS CENTER MID-ATLANTIC Voyage Repair Team, Mayport Florida Building 1613 Naval Station Mayport, Mayport Florida 32228

STATEMENT OF WORK FOR CONTRACTURAL PROCUREMENT OF JET BLAST DEFLECTOR HYDRAULIC TEST PUMP AND STAND (FY-23)

1. The FRCMA Voyage Repair Team (VRT), a source approved Department of the Navy ALRE ship repair facility has a requirement to procure a Hydraulic Test Pump Stand per the specifications below.

2. The following specifications are required on the new test pump:

· Pump Type - Piston Pump

· Max pressure 10,000 PSI

· Operating range 1000-6000 PSI

· Gage Panel, pressure gages are liquid filled ( request spare set) calibrated from an accredited calibration lab with cert paperwork

· Pressure controlled by a remote relief valve with a hand dial manual adjustment

· Pressure gages are liquid filled ( request spare set) calibrated from an accredited calibration lab with certification paperwork to the pressure lines A & B ports

· Manifold valve splitter 4 lines

· Fluid Reservoir 50 gal (with sight gage and calibrated removable thermometer) cert paperwork

· Power is 460V/3PH 30 HP electric motor with a 50 foot power cord

· Test 4 double actuating cylinders, with individual lockout valves

· Pressure and Return line filtration

· Full unit containment/drip pan

· Steel frame with caster min 6”

· Frame and Reservoir corrosion control coating

· 0-6000 psi (spring kit included) automatic relief valves installed on ports A & B. Must have 3/8 NPT male thread on discharge side.

· Warranty 2 years on parts and labor

· Parts listing with part number and MFG

· Technical / operational manual image1.png