SOW_Amendment_1.docx

Statement of Work – Rev A

1.0 Conduct of Work. The Contractor shall deliver mobile workstations, cabinets and grand master keys to the NAVAIR Calibration Laboratory located in the Fleet Reserve Center Southeast (FRCSE) Jacksonville FL. A loading dock facility is available at FRCSE Jacksonville for the delivery. The Contractor will assemble the cabinets prior to delivery. The Contractor will assemble the workstations on-site at FRCSE Jacksonville. The workstations and cabinets will be installed by the Contractor in the NAVAIR Calibration Laboratory at FRCSE Jacksonville.

2.0 Base Regulations. The Contractor shall conform to all Base regulations and directives that pertain to security, safety, traffic, fire and personnel clearances. The Contractor shall be responsible for providing and placing appropriate barricades and safety devices during offloading activities. The use of tobacco products within work spaces is prohibited. The Contractor is responsible for all traffic tickets, fines or citations received.

2.1 Personnel. The Contractor shall use only delivery personnel who can obtain access to the base by having proper identification and clearances. Foreign nationals will not be granted access to the base.

2.2 Safety Requirements and Reports. The Contractor shall strictly adhere to Environmental Protection Agency Regulations (EPA), Federal Occupational Safety and Health Regulations (OSHA), U.S.

Army Corps of Engineers Safety and Health Handbook (EM-385), as well as all applicable state and local requirements.

2.3 Fire Protection. The Contractor shall handle all combustible supplies, materials, waste and trash in a manner that prevents fire hazards to persons, facilities, and materials.

2.4 Environmental Protection. The Contractor shall comply with all applicable federal, state, and local laws and remediate any spills. In event that a regulatory agency assesses a monetary fine against the Government for violations caused by Contractor negligence, the Contractor shall reimburse the Government for the amount of that fine and other costs. Hazardous waste must be disposed of in accordance with the Resource Conservation and Recovery Act and its associated state and local regulations.

2.5 Disposal. All packing material and other debris shall be disposed of by the Contractor at their expense off Government property.

2.6 Passes and Badges. All Contractor employees shall obtain the required employee and vehicle passes.

Commercial/over-sized vehicles shall be inspected at the commercial gate. The Contractor shall anticipate delays during the inspection process as well as delays due to vehicle queues.

3.0 Electrostatic Discharge. While assembling the specified product, the Contractor shall fully adhere to the Lista Electrostatic Discharge (ESD) Handbook. Avoid damaging the ESD laminates and paints in any way with sharp objects. Damaged ESD protected work surfaces can lead to loss of ESD protection. Keep non-conductors and unnecessary materials away from an ESD protected environment. Correct assembly, operation, care, and maintenance of the ESD workstation are essential for ESD compatibility. For proper assembly instructions, please visit the Lista International website at: www.listaintl.com and search for “assembly instructions”.

4.0 Scheduled Effort. The Contractor’s efforts shall be performed during the normal workday (7:30 am to 4:00 pm Monday through Thursday) with the least disruption to the building.

5.0 The Lista International Limited Lifetime Warranty applies.

Attachment (2)