N6660422P0276 Amendment 0001.pdf

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. NAME AND TITLE OF SIGNER (Type or print)

30-105-04EXCEPTION TO SF 30

APPROVED BY OIRM 11-84

STANDARD FORM 30 (Rev. 10-83) Prescribed by GSA

FAR (48 CFR) 53.243

See Page 2.

1. CONTRACT ID CODE PAGE OF PAGES

J 1 3

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

16C. DATE SIGNED

BY 19-Jul-2022

16B. UNITED STATES OF AMERICA15C. DATE SIGNED15B. CONTRACTOR/OFFEROR

(Signature of Contracting Officer)(Signature of person authorized to sign)

8. NAME AND ADDRESS OF CONTRACTOR (No., Street , County, State and Zip Code) X N6660422R0276

X 9B. DATED (SEE ITEM 11)

22-Jun-2022

10B. DATED (SEE ITEM 13)

9A. AMENDMENT OF SOLICITATION NO.

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

X The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offer X is extended, is not extended.

Offer must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended by one of the following methods:

(a) By completing Items 8 and 15, and returning 1 copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN

REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. ACCOUNTING AND APPROPRIATION DATA (If required)

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE

CONTRACT ORDER NO. IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation date, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(B).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

E. IMPORTANT: Contractor is not, is required to sign this document and return copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

10A. MOD. OF CONTRACT/ORDER NO.

2. AMENDMENT/MODIFICATION NO. 5. PROJECT NO.(If applicable)

6. ISSUED BY

3. EFFECTIVE DATE

19-Jul-2022

CODE

NAVAL UNDERSEA WARFARE CENTER

TYLER M KENYON, CODE 0224

CONTRACTS DEPARTMENT

1176 HOWELL STREET, BLDG. 1258

NEWPORT RI 02841-1708

N66604 7. ADMINISTERED BY (If other than item 6)

4. REQUISITION/PURCHASE REQ. NO.

CODE

See Item 6

FACILITY CODECODE

EMAIL:TEL:

N6660422R0276

SECTION SF 30 BLOCK 14 CONTINUATION PAGE

SUMMARY OF CHANGES

SECTION SF 30 - BLOCK 14 CONTINUATION PAGE

The following have been added by full text:

GENERAL INFO AMENDMENT 0001

AMENDMENT 0001

The purpose of solicitation Amendment 0001 is to:

1. Extend the Request for Proposal due date and time from 22 July 2022 at 1400 EST to 29 July 2022 at 1400 EST.

2. Respond to questions from industry as follows:

QUESTION 1:

There is a raw material constraint anticipated with CLINs 0001 and 0002. The raw material required to produce these CLINs is considered non-standard and must be milled before it can be shipped to the contractor. The raw material delivery estimate is projected to be up to twenty weeks based on current supply. Would the Government consider drafting an amendment to set a maximum total order quantity of three (3) complete assemblies of CLINs 0001 and 0002 in Year 1? (Example, CLIN 0001 order quantity two (2) units, plus (+) CLIN 0002 order quantity one (1) units, equals (=) annual maximum total of three (3) units in Year 1, or any combination of CLIN 0001 + CLIN 0002 that totals three (3)). This would allow the successful offeror a needed ramp-up period to source and receive the required raw material. Since all offerors would face similar ramp up constraints, it would be in the Government's best interest to consider this change to the request for proposal (RFP).

ANSWER:

No. The Government’s requirement is set forth within solicitation N6660422R0276 and remains unchanged. Please see page 2 of the solicitation for the minimum and maximum quantities the Government has the ability to procure per year if necessary. Please also see page 33, clause “52.211-8 Time of Delivery” for the required delivery schedule.

QUESTION 2:

Given the previously mentioned raw material constraints, we would like to request that the Government draft an amendment and add language to the contract that sets a combined maximum annual order quantity for CLINs 0001 and 0002. We request that the combined order quantity of CLIN 0001 and 0002 be stated as not to exceed twenty (20) units total in any single option year. (Example, CLIN X001 order quantity 15 units, plus (+) CLIN X002 order quantity 5 units, equals (=) annual maximum total of twenty (20) units, or any combination of CLIN X001 + CLIN X002 that totals twenty (20) in a single year.) We assert that it would be in the Government's best interest to consider both a ramp-up order rate in Year 1 of no more than three (3) total units and set a maximum combined order rate of twenty

(20) units of CLINs X001 and X0002 in the option years. The proposed change is offered because the milling capacity for raw material must be taken into consideration to produce some of the larger assemblies. Since all offerors would face similar ramp up and logistics constraints, it would be in the Government's best interest to consider this change to the RFP.

ANSWER: The Governments requirement is set forth within solicitation N6660422R0276 and remains unchanged.

Please see page 2 of the solicitation for the minimum and maximum quantities the Government has the ability to procure per year if necessary. Please also see page 33, clause “52.211-8 Time of Delivery” for the required delivery schedule.

QUESTION 3:

On Drawing 8805775 Detail E, the .350 dimension is an exact point with no tolerance located along the 15 degree slope and is referenced as the point where the .399 +-.006 should be measured. Performing this measurement requires

N6660422R0276 using specialized measurement equipment. Will the Government confirm that this is the point of measurement required to meet the specification on this assembly?

ANSWER: Confirmed. That is the correct point.

QUESTION 4:

I have a quantity/pricing question.

Example; Item No 0001, pg. 4, says Quantity 56. Is that just a forecast of the quantity over the 5 year contract period?

ANSWER: On page 4, the Quantity 56 for CLIN 0001 is the maximum quantity (Ceiling) the Government has the ability to procure in total under the life of this contact (5 years)

(End of Summary of Changes)