MINIMUM SPECIFICATIONS Copy.xlsx
XLSX spreadsheet 25 KB Posted
- Attached to
- VTC Equipment
- Solicitation number
- N66001-18-Q-7824
View the file
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Sheet1
| ITEM # (Proposed CLIN) | Part Number | Description | QTY | UNIT OF ISSUE | Minimum Specifications |
| 1 | P/N: CISCO CTS-ISDNLINK-K9 OR EQUAL | ISDN Terminal Adapter -1920 Kbps | 2 | EA | 1. ISDN Terminal Adapter must have a footprint no larger than one rack unit |
2. ISDN Terminal adapter must be compatible with existing Cisco SX series products and feature a combined web interface for configuration
3. ISDN Terminal Adapter must be able attain certification and authority to operate in secure spaces
4. ISDN Terminal Adapter must be able to accept as input 4 BRI lines or 1 PRI line or a 26 pin network port, as well as act as a conduit for outside LAN access
5. ISDN Terminal Adapter must be able to pair with Cisco codecs and act as a passthru for LAN connection to the Codec to facilitate remote settings control 2 P/N: EXTRON 60-1545-01U OR EQUAL 16 I/O Port Modular Digital Matrix Switch 3 EA CLINS 2 through 8 are interdepedent and must be compatible
1. Matrix Switch must support 16 Inputs and 16 Outputs
2. Matrix Switch must be able to service various digital and analog A/V standards via swappable "cards" or "blades"
3. Matrix Switch must be able to independently route audio and video through the output regardless of input format
4. Matrix Switch footprint must be no more than 5 standard rack units
5. Matrix Switch backplane must support resolutions up to 4096x2160 @30 Hz with 8 bit color
6. Four HDMI Input Board must feature balanced/unbalanced stereo inputs
7. Four HDMI Input Board must facilitate audio breakaway capability
8. Four HDMI Input Board must manage all EDID information coming from the output source
9. Four HDMI Input Board must support computer and video resolutions up to 1920x1200, including 1080p/60 with Deep Color
10. Four HDMI Output Board must feature balanced/unbalanced stereo outputs
11. Four HDMI Output Board must facilitate audio breakaway capability
12. Four HDMI Output Board must manage and maintain all EDID information coming from the output source
13. Four HDMI Output Board must support computer and video resolutions up to 1920x1200, including 1080p/60 with Deep Color
14. Four HDMI Output Board must be capable of providing +5 VDC, 250 mA on HDMI outputs
15. Four Stereo Audio Output Board must provide balanced/unbalanced output for audio breakaway
16. Four Stereo Audio Output Board must allow for independent volume adjustment and muting
17. Matrix Switch Rear Blank Plates must be compatible with Matrix Switch
18. Two Output HDMI Distribution Amplifier must be capable of accepting one HDMI input and distributing to two HDMI outputs at 4K resolution
19. Two Output HDMI Distribution Amplifier must be capable of carrying EDID information and in a format recognized by the Matrix Switch for further downstream distribution
20. Two Output HDMI Distribution Amplifier must be HDCP Compliant
21. HDMI to HDMI Scaler must up/downscale a range of resolutions from/to 480i-2K
22. HDMI to HDMI Scaler must be able to provide EDID information in a format recognized by the Matrix Switch for further downstream distribution
23. CLIN 7 and 8 should be no taller than a standard 1.75" rack unit
24. All equipment must operate on a 120V AC 60 Hz circuit
25. To the extent applicable, equipment must be JITC certified
| 3 | P/N: EXTRON 70-682-11 OR EQUAL | Four HDMI Input Board (Blade) | 8 | EA | |
| 4 | P/N: EXTRON 70-687-11 OR EQUAL | Four HDMI Output Board (Blade) | 7 | EA | |
| 5 | P/N: EXTRON 70-944-01 OR EQUAL | Four Stereo Audio Output Board (Blade) | 2 | EA | |
| 6 | P/N: EXTRON 70-939-01 OR EQUAL | Matrix Switch Rear Blank Plates | 11 | EA | |
| 7 | P/N: EXTRON 60-1480-01 OR EQUAL | Two Output HDMI Distribution Amplifier | 10 | EA | |
| 8 | P/N: EXTRON 60-1489-01 OR EQUAL | HDMI to HDMI Scaler | 7 | EA | |
| 9 | P/N: EXTRON 26-665-01 OR EQUAL | DisplayPort Male to HDMI Female Adapter Pigtail | 10 | EA | 1. Adapter must support resolutions up to 1920x1200/60 and 1080p/60 between the described formats and form factors |
| 10 | P/N: EXTRON 60-1074-01 OR EQUAL | RGB and Stereo Audio to HDMI Scaler | 5 | EA | CLINS 10 through 12 have similar interdependencies with CLIN 2 |
1. RGB/Stereo Aud to HDMI Scaler must support resolutions up to 1920x1200 and audio embedding between the described formats and form factors
2. RGB/Stereo Aud to HDMI Scaler will accept the video input in the VGA 15-pin format
3. RGB/Stereo Aud to HDMI Scaler will provide EDID emulation that can be carried through by the Matrix Switch (CLIN 2)
4. DVI to Analog RGB Scaler will support resolutions up to 1920x1200 and 1080p/60 between the described formats and form factors
5. DVI to Analog RGB Scaler RGB output will be provided via BNC connectors
6. DVI to Analog RGB Scaler EDID information will be capable of being passed to Matrix Switch (CLIN 2)
7. HDMI/VGA/Composite to HDMI Scaler must support resolutions up to 1920x1200 to the extent that the input technology will allow
8. HDMI/VGA/Composite to HDMI Scaler will support passing of EDID information recognizable to the Matrix Switch (CLIN 2)
9. HDMI/VGA/Composite to HDMI Scaler will support auto-switching between inputs
10. CLIN 10-12 should be no taller than a standard 1.75" rack unit
11. All equipment must operate on a 120V AC 60 Hz circuit
| 11 | P/N: EXTRON 60-1064-01 OR EQUAL | DVI to Analog RGB Video Scaler | 2 | EA | |
| 12 | P/N: EXTRON 60-1253-01 OR EQUAL | HDMI/VGA/Composite to HDMI Scaler | 3 | EA | |
| 13 | P/N: EXTRON 60-563-02 OR EQUAL | Four Channel Amplifier | 1 | EA | 1. Amplifier must provide four independent channels, with at least 200 Watts into 4 Ohm inputs or 100 Watts into 8 Ohm inputs |
2. Amplifier must be passively cooled
3. Amplifier must fit into one standard rack unit 14 P/N: TRENDNET TU-S9 OR EQUAL USB to RS-232 Converter 6 EA 1. Connector dongle must be USB 1.1 Male to DB9 Male
2. Connector dongle must be compatible with and recommended for use with a Cisco SX20 codec 15 P/N: NEC P703 OR EQUAL 70" LED Backlit Professional-Grade Large Screen Display 4 EA 1. Display must have at least 1920x1080 resolution
2. Display must accept DisplayPort, HDMI, DVI-D, Audio Mini-Jack, RS-232C
3. Display must not have wifi capability
4. Display must be able to daisy chain RS-232 control signals to another similar monitor
5. Display must contain an amplifier with sufficient power to drive two discrete rear mounted speakers
6. Display must have bezels of less than an inch 16 P/N: NEC X651UHD-2 OR EQUAL 65" LED Backlit Ultra High Definition Professional-Grade Large Screen Display 2 EA 1. Display must have at least 2K resolution
2. Display must accept DisplayPort 1.2, HDMI, DVI-D, Audio Mini-Jack, RS-232C
3. Display must not have wifi capability
4. Display must be able to daisy chain RS-232 control signals to another similar monitor
5. Display must contain an amplifier with sufficient power to drive two discrete rear mounted speakers
6. Display must have bezels of less than an 0.75" 17 P/N: NEC SP-TF1 OR EQUAL Thin Side/Rear Mounted Speaker 2 EA 1. Speakers must be able to drive 15 Watts
2. Speakers must be compatible with/be able to be mounted directly to the frame of CLIN 15 and CLIN 16 18 P/N: ALLIED TELESIS AT-MMC2000/LC-90 OR EQUAL Ethernet Media Converter, 10/100/1000T to 1000SX/LC, multi-mode LC fiber 14 EA 1. Media Converter must support multi mode LC terminated fiber
2. Media Converter must have a vertical footprint less than the height of a standard rack unit (1.75") 19 P/N: CLEARONE 910-151-880 OR EQUAL 8 Channel Microphone Mixer w/ Auto Echo Cancellation 3 EA 1. Mixer must have Accoustical Echo Cancellation and Noise Cancellation
2. Mixer must have 8 Dual Mic/Line Inputs
3. Mixer must have 4 Line only inputs
4. Mixer must have 12 line level outputs
5. Mixer must be controllable via serial (RS-232) on all functions including input gain, output gain, muting, gating control
6. Mixer must be expandable with the ability to daisy chain like units together
7. Mixer footprint must be no larger than one standard rack unit
| 20 | P/N: CTG AUDIO CM-02 OR EQUAL | Ceiling Microphone | 4 | EA | 1. Microphone must be omni and able to flush mount to ceiling. |
| 21 | P/N: SHURE MX392/O OR EQUAL | Boundary Microphone, Black | 2 | EA | 1. Microphone must have omni pattern |
2. Microphone must be a desk/table mic with physical mute button situated on microphone 22 P/N: BOSTON ACOUSTICS BRAVO 20 OR EQUAL On-Wall Speaker 4 EA 1. Speaker must be corner mountable and include mounting bracket
2. Speaker must drive at least 15 Watts
3. Speaker must be 8 ohm input impedance
4. Speaker should be no more than 15" in height and 8 " in width 23 P/N: ELECTRO STANDARDS LABORATORIES 7370 OR EQUAL Cat6A RJ45 A/B Switch w/ Serial Remote Control Port 3 EA 1. RJ45 Switch must be rack mountable in one standard rack unit
2. RJ45 Switch interfaces must meet Cat6A performance
3. RJ45 Switch must be remotely switchable using RS-232 protocol via DB9 interface
4. RJ45 Switch must have at least two inputs 24 P/N: AMX FG2106-03 OR EQUAL Integrated Controller 3 EA CLINS 24 thru 29 are interdependent and must be compatible
1. Integrated Controller must natively support 8 serial ports, 8 I/O ports, 8 relay ports, 8 relay ports, dual network interface cards, and support control extensibility over IP via LAN connection
2. At least two of the Integrated Controller serial ports must natively support RS-485 protocol. All 8 serial ports must natively support RS-232 protocol
3. 10.1" Touch Panel must be compatible with Integrated Controller and interface must measure no less than 9 inches and also no more than 12 inches.
4. 20.3" Touch Panel must be compatible with Integrated Controller and interface must measure no less than 20 inches and also no more than 22 inches.
5. Touchpanels must not contain a camera or microphone
6. Gigabit PoE Ethernet Switch must be able to fit in one standard rack unit
7. Gigabit PoE Ethernet Switch must be listed on common approved product lists that also feature the Integrated Controller
8. Gigabit PoE Ethernet Switch must have at least 8 ports, and be able to provide 30W for a single port up to a 75W overall power budget
| 25 | P/N: AMX FG423-49 OR EQUAL | 7 Amp Power Supply | 4 | EA | |
| 26 | P/N: AMX FG2178-64 OR EQUAL | Gigabit PoE Ethernet Switch | 3 | EA | |
| 27 | P/N: AMX FG5968-24 OR EQUAL | 10.1" Touchpanel | 2 | EA | |
| 28 | P/N: AMX FG5968-32 OR EQUAL | 20.3" Touchpanel | 1 | EA | |
| 29 | P/N: AMX FG423-48 OR EQUAL | 12VDC, 5.4A Power Supply | 1 | EA | |
| 30 | P/N: ALPHA AMERICAN 215C OR EQUAL | One Line LED Display | 3 | EA | 1. Display Signage must display at least 15 full width characters simultaneously |
2. Display Signage must have at least three colors, Green, Red, Amber
3. Display Signage must be able to be changeable via RS-232 protocol instructions 31 P/N: DATAPROBE SBB-N15 OR EQUAL Serial I/O 15A Controllable Power Strip 3 EA 1. Power Strip must have at least 8 individually controllable outputs
2. Power Strip control must be integrated by remote relay closure 32 P/N: MIDDLE ATLANTIC PD-2015R-NS OR EQUAL Multi-Mount Rackmount Power, 20 Outlet, 15A 12 EA CLINS 32 thru 43 are interdependent and must be compatible CLIN 35 AND 36 ARE DUPLICATED, QUANTITY OF 3 ARE NEEDED. CLIN IS MAINTAINED IN ORDER TO MATCH UP WITH QUOTE
1. 3 Bay Credenza must have 14 rack units of space per bay
2. 3 Bay Credenza dimensions with finish must not exceed 33"x31"x68"
3. 3 Bay Credenza must have options for venting panels, custom funiture finishes, handles, locks
4. Rackmount Power must handle 15A and fit 20 outlets in one rack unit and must be compatible with 3 Bay Credenza
5. Venting Panel must be black and compatible with 3 Bay Credenza
6. Thermolaminate finishes must be compatible with 3 Bay Credenza
7. Handle Accessory must be compatible with 3 Bay Credenza
8. Lock Accessory must be compatible with 3 Bay Credenza
9. Adjustable Rail Brackets must be compatible with the 31" depth 3 Bay Credenza
10. Mounting Rackshelves must be compatible with the 3 Bay Credenza
11. Lace Bars must be compatible with the rack rails on the 3 Bay Credenza
12. Copper Bus Bar must be compatible with the rack rails on the 3 Bay Credenza
| 33 | P/N: MIDDLE ATLANTIC C5-FF31-3 OR EQUAL | 3 Bay Credenza, 31" Depth | 4 | EA | |
| 34 | P/N: MIDDLE ATLANTIC C5-VENT3-BK OR EQUAL | Venting Panel for 3 Bay Credenza, Black | 4 | EA | |
| 35 | P/N: MIDDLE ATLANTIC C5K3B1MSTNA OR EQUAL | Thermolaminate Finish for 3 Bay Credenza, NAPA | 2 | EA | |
| 36 | P/N: MIDDLE ATLANTIC C5K3B1MSTNA OR EQUAL | Thermolaminate Finish for 3 Bay Credenza, NAPA | 1 | EA | |
| 37 | P/N: MIDDLE ATLANTIC C5K3B1MSTNM OR EQUAL | Thermolaminate Finish for 3 Bay Credenza, NATIVE MAPLE | 1 | EA | |
| 38 | P/N: MIDDLE ATLANTIC ACC-HANDLE1-MAT OR EQUAL | Handle Accessory for 3 Bay Credenza | 12 | EA | |
| 39 | P/N: MIDDLE ATLANTIC ACC-LOCK1-MAT OR EQUAL | Lock Accessory for 3 Bay Credenza | 12 | EA | |
| 40 | P/N: MIDDLE ATLANTIC C5-ARB31 OR EQUAL | Adjustable Rail Brackets for 31" depth Credenza | 9 | EA | |
| 41 | P/N: MIDDLE ATLANTIC UTR1-RP12 OR EQUAL | Mounting Rackshelf for 3 Bay Credenza | 4 | EA | |
| 42 | P/N: MIDDLE ATLANTIC LBP-1A OR EQUAL | Lace Bar, L-Shaped, 10pc | 4 | EA | |
| 43 | P/N: MIDDLE ATLANTIC BB12 OR EQUAL | Copper Bus Bar for 3 Bay Credenza | 3 | EA | |
| 44 | P/N: CHECKERS INDUSTRIAL SAFETY PRODUCTS RFD2-10 OR EQUAL | 2 Channel Rubber Duct Protector, 10 Feet | 2 | EA | 1. Duct Protector must have two channels and have 10 feet of run |
2. Maximum Duct height not to exceed 3/4"
3. Maximum Duct width not to exceed 3 1/2" 45 P/N: CHECKERS INDUSTRIAL SAFETY PRODUCTS RFD3-10 OR EQUAL 3 Channel Rubber Duct Protector, 10 Feet 2 EA 1. Duct Protector must have three channels and have 10 feet of run
2. Maximum Duct height not to exceed 3/4"
3. Maximum Duct width not to exceed 3 1/2"
| 46 | P/N: VADDIO 535-2000-217 OR EQUAL | Thin Profile Wall Mount Bracket for Cisco Precision HD | 3 | EA | 1. Bracket must have profile and mounting holes to accommodate the Cisco Precision HD line of cameras |
| 47 | P/N: CHIEF MANUFACTURING LTM1U OR EQUAL | Large Micro-Adjustable Tilt Wall Mount | 6 | EA | 1. Wallmount must be able to shift laterally up to 17" |
2. Wallmount must allow for at least -12 degrees of tilt
3. Wallmount must have weight capacity of at least 200 lbs 48 P/N: EXTRON 22-158-03 OR EQUAL 22 AWG Serial Control/Audio Cable, Plenum, 1000' 1 EA 1. Cable Spool must be 1000', Plenum, and 22 AWG
2. Cable must comprise at least one shielded twisted pair
| 49 | P/N: CABLES 2 GO 28104 OR EQUAL | USB 2.0 A/B Cable - 5m | 8 | EA | 1. Cable must support USB 2.0, have USB A to USB B interface |
| 50 | P/N: ORTRONICS OR-MC603-08 OR EQUAL | Cat6 Modular Patch Cord, 3' | 13 | EA | CLINS 49 thru 52 are not interdependent, but must all have the following minimum specifications |
1. Cable must be at the indicated length, and NASI/TIA 568B Cat6 RJ-45 Male terminated at both ends
2. Cable must have conductor gauge no lower than 24 AWG
| 51 | P/N: ORTRONICS OR-MC607-08 OR EQUAL | Cat6 Modular Patch Cord, 7' | 9 | EA | |
| 52 | P/N: ORTRONICS OR-MC615-08 OR EQUAL | Cat6 Modular Patch Cord, 15' | 5 | EA | |
| 53 | P/N: ORTRONICS OR-MC625-08 OR EQUAL | Cat6 Modular Patch Cord, 25' | 11 | EA | |
| 54 | P/N: EXTRON 26-571-07 OR EQUAL | Stereo Audio 3.5mm Male to Male Cable, 25' | 19 | EA | CLINS 54 thru 59 are not interdependent, but must have the following minimum specifications |
1. Cable must be at the indicated length and the indicated male interface at both ends
2. HDMI Cable must support resolutions up to 4096x2190
3. HDMI Cable conductor must be 30 AWG
| 55 | P/N: EXTRON 26-663-02 OR EQUAL | Flexible High Speed HDMI Cable, 1.5' | 5 | EA | |
| 56 | P/N: EXTRON 26-663-03 OR EQUAL | Flexible High Speed HDMI Cable, 3' | 10 | EA | |
| 57 | P/N: EXTRON 26-663-06 OR EQUAL | Flexible High Speed HDMI Cable, 6' | 12 | EA | |
| 58 | P/N: EXTRON 26-663-09 OR EQUAL | Flexible High Speed HDMI Cable, 9' | 29 | EA | |
| 59 | P/N: EXTRON 26-663-15 OR EQUAL | Flexible High Speed HDMI Cable, 15' | 6 | EA | |
| 60 | P/N: EXTRON 26-650-25 OR EQUAL | High Speed HDMI Cable, 25' | 10 | EA | 1. Cable must be at the indicated length and the indicated male interface at both ends |
2. HDMI Cable must support resolutions up to 4096x2190
3. HDMI Cable conductor must be at least 22 AWG 61 P/N: EXTRON 60-1621-01 OR EQUAL HDMI Cable Equalizer 6 EA 1. Must extend 4K video signals up to 75 feet or 1080p signals up to 175 feet when used with any cable speced in CLIN 59
2. Must be able to be powered directly from the HDMI source device via the connected HDMI cable
3. Must support some form of EDID pass thru recognizable by the Matrix Switch (CLIN 2) 62 P/N: EXTRON 26-614-02 OR EQUAL HDMI-DVI Cable, 6' 6 EA CLINS 62 and 63 are NOT interdependent, but must both have all the following minimum specifications
1. Cable must be at the indicated length and male HDMI on one end and male DVI-D on the other
2. Cable must support resolutions up to 1920x1200 @ 60 Hz
3. Cable conductor must be 28 AWG
| 63 | P/N: EXTRON 26-614-03 OR EQUAL | HDMI-DVI Cable, 12' | 20 | EA | |
| 64 | P/N: EXTRON 26-671-01 OR EQUAL | Multimode Fiber Optic Cable OM4, LC, 1' | 8 | EA | 1. Cable must be duplex and terminated by industry standard LC connectors |
2. Cable must support multimode OM4 65 P/N: EXTRON 26-490-02 OR EQUAL VGA-A M-M Cable, 6' 1 EA CLINS 65 and 66 are NOT interdependent, but must both have all the following minimum specifications
1. Cable must be at the indicated length and male HD15 on both ends with 3.5mm TRS companion breakout
2. Cable must support resolutions up to 1920x1200 @ 60 Hz
| 66 | P/N: EXTRON 26-490-03 OR EQUAL | VGA-A M-M Cable, 12' | 1 | EA | |
| 67 | P/N: EXTRON 26-533-02 OR EQUAL | HD15 Male to BNC Male Cable, 6' | 1 | EA | 1. Cable must be at the indicated length and indicated interface on both ends |
2. BNC end will be 5 75 Ohm connectors
| 68 | P/N: TRIPPLITE P024-010 OR EQUAL | Power Extension Cord, 15A, 14 AWG, NEMA5-15P, 10' | 8 | EA | 1. Cord shall have the described properties, and be at least 10' in length, with 5-15R to 5-15P interface |
| 69 | P/N: STONEWALL CABLE SC-3102-2 OR EQUAL | RS-366 Encryption Cable, DB25M to DB25F | 2 | EA | 1. Cable must be male DB25 to female DB25 straight thru, at least 6 feet long, with PVC jacket |
File details come from the government source that posted it.