The file's text, extracted by GovTribe without its formatting.
Attachment No. 1 – Specification Table
PART I
Offeror Name:
Section 1: Product Description and Specifications. Offerors shall provide the following information:
1. Name and model of the product(s) offered that meet the Government’s requirements.
2. Indicate the specifications of the offered product for each of the Government server specifications below.
Physical Parameters – Servers See Attachment 2. Server Dimensions in Attachment #2, #3, and #4 are MANDATORY for the 1RU / 2RU / 3RU server
| Item |
| QTY |
| Size HxWxD (Inches) |
| Weight |
| Watts per Item |
| Watts Total |
| Heat per Item (BTU Per Hour) |
| Heat Total |
(BTU Per Hour) Indicate Offered Product Specifications Below
1RU Server – Attachment 2 - 254-16-D-5477 CANES Shallow Depth 1RU Server Specification (1-10-17)
| Server |
| 1 |
| See 1RU Reference Drawing |
| 42LBS |
| 221 |
| 221 |
| 757 |
| 757 |
| 1. Weight: |
___lbs.
2. Watts per item: ____.
3. Watts total: ______.
4. Heat per item: ______.
5. Heat total: ______.
Cooling Fans - front to back
No external Kits to meet EQT requirements
2RU Server - Attachment 3 - 254-16-D-5478 CANES Shallow Depth 2RU Server Specification (11-7-16)
| Server |
| 1 |
| See 2RU Reference Drawing |
| 38LBS |
| 290 |
| 290 |
| 990 |
| 990 |
| 1. Weight: |
___lbs.
2. Watts per item: ____.
3. Watts total: ______.
4. Heat per item: ______.
Cooling Fans - front to back
No external Kits to meet EQT requirements
3RU Server - Attachment 4 - 254-16-D-5479 CANES Shallow Depth 3RU Server Specification (11-7-16)
| Server |
| 1 |
| See 3RU Reference Drawing |
| 38LBS |
| 290 |
| 290 |
| 990 |
| 990 |
| 1. Weight: |
___lbs.
2. Watts per item: ____.
3. Watts total: ______.
4. Heat per item: ______.
Cooling Fans - front to back
No external Kits to meet EQT requirements
1RU SERVER SPECIFICATIONS
| SECTION |
| PARAMETER |
| ATTRIBUTE |
| SPECIFICATION |
| INDICATE OFFERED PRODUCT SPECIFICATIONS BELOW |
Physical
| Video Interface |
| Standard/Connector |
| VGA / HD15 |
| LAN0 interface |
| Connector |
| RJ-45 |
| LAN1 interface |
| Connector |
| RJ-45 |
| USB Interfaces |
| Standard |
| 2.0/3.0 |
| Pointing Interface |
| Standard/Connector |
| USB |
| Serial Interfaces |
| Connector |
| DB-9 |
Chassis Ground
Rear Stud
Power Interface
EC 320 EN 60320 C14 (M), 2 Pole, 3 Wire Grounding Provide Power Plug Retention
| Hardware |
| Hardware shall be part of the (OS software) Hardware Compatibility List (HCL) |
| Power Supplies |
| Capability |
| single high efficiency power supply |
| Optical Drive |
| Capability |
| Blue Ray/DVD+ 24X CD Read (Min) |
| NIC PCI |
| Capability |
| Not required |
| Hard Disk Drive |
| Minimum Capability |
| 4 TB each |
| Capability (IOPS) |
| 1000 IOPS |
| Technology |
| Solid State Drive (SSD) |
| RAM |
| Minimum Capability |
| 256 GB (total) |
| Capability |
| ECC (Error Correcting Code) type or similar technology |
| USB Quantity |
| Capability |
| 2.0/3.0 |
| Quantity |
| 5 (4 - Rear Mounted, 1 - Forward Mounted) |
| Serial COMM ports |
| Capability |
| DB-9 |
| RAID Card Capability |
| Capability |
| shall support greater than 20 Data Stores |
Motherboard
| BIOS |
| Capability |
| UEFI 2.3.1c-based system and firmware that supports secure boot |
| Capability |
| Trusted Platform Module |
| Processor |
| Capability |
| 64- bit supported |
| Capability |
| Supports NX and DEP |
| Capability |
| Supports CMPXCHG16b, LAHF/SAHF, and PrefetchW |
| Capability |
| Supports Second Level Address Translation (EPT or NPT) |
| Capability |
| 14 CORE / 28 THREAD |
| Chipset |
| Chipset |
| TXT-VT-d Enabled |
| Video |
| Capability |
| On-board |
| NIC |
| Capability |
| 10/100/1000 On-Board |
Operating Systems Support
| Hypervisor Supported |
| VMware ESX 6.x |
| Willing/able to add server to VMWare Hardware Compatibility List (HCL) |
| Hypervisor Supported |
| VMware ESXi 6.x |
| Willing/able to add server to VMWare Hardware Compatibility List (HCL) |
| Hypervisor Supported |
| Hyper-V Server 2012 |
| Hypervisor Supported |
| Hyper-V Server 2016 |
| Hypervisor Supported |
| XENSERVER |
| OS Supported |
| WIN Server 2012 64-bit Supported |
| OS Supported |
| WIN Server 2016 64-bit Supported |
| OS Supported |
| Red Hat Enterprise Linux |
| OS Supported |
| Red Hat Enterprise Bare Metal OS Version 5.3 |
| OS Supported |
| Red Hat Enterprise Linux as Virtual Guest (Unlimited quest per socket) Standard |
2RU/3RU SERVER SPECIFICATIONS
| SECTION |
| PARAMETER |
| ATTRIBUTE |
| SPECIFICATION |
| INDICATE OFFERED PRODUCT SPECIFICATIONS BELOW |
Physical
| Video Interface |
| Standard/Connector |
| VGA / HD15 |
| NIC Fiber Interfaces |
| Connector |
| LC |
| LAN0 interface |
| Connector |
| RJ-45 |
| LAN1 interface |
| Connector |
| RJ-45 |
| USB Interfaces |
| Standard |
| 2.0/3.0 |
| Pointing Interface |
| Standard/Connector |
| USB |
| Serial Interfaces |
| Connector |
| DB-9 |
Chassis Ground
Rear Stud
Power Interface
EC 320 EN 60320 C14 (M), 2 Pole, 3 Wire Grounding Provide Power Plug Retention
| Hardware |
| Hardware shall be part of the (OS software) Hardware Compatibility List (HCL) |
| Power Supplies |
| Capability |
| single high efficiency power supply |
| Capability |
| Redundant Power Sharing |
| Optical Drive |
| Capability |
| Blue Ray/DVD+ 24X CD Read (Min) |
| NIC PCI |
| Capability |
| 2 LC interfaces per card |
| Hard Disk Drives |
| Minimum Capability |
| 4 TB each (min) |
| Technology |
| Solid State Drive (SSD) |
| RAM |
| Minimum Capability |
| 256 GB (total) |
| Capability |
| ECC (Error Correcting Code) type or similar technology |
| Quantity |
| 6 (4 - Rear Mounted, 2 - Front Mounted) |
| Serial COMM ports |
| Capability |
| DB-9 |
| RAID Capability |
| Capability |
| Shall support greater than 20 Data stores |
Motherboard
| BIOS |
| Capability |
| UEFI 2.3.1c-based system and firmware that supports secure boot |
| Capability |
| Trusted Platform Module |
| Processor |
| Capability |
| 64- bit supported |
| Capability |
| Supports NX and DEP |
| Capability |
| Supports CMPXCHG16b, LAHF/SAHF, and PrefetchW |
| Capability |
| Supports Second Level Address Translation (EPT or NPT) |
| Capability |
| 14 CORE / 28 THREAD |
| Chipset |
| Chipset |
| TXT-VT-d Enabled |
| Video |
| Capability |
| On-board |
| Capability |
| 10/100/1000 On-Board |
Operating Systems Support
| Hypervisor Supported |
| VMware ESX 6.x |
| Willing/able to add server to VMWare Hardware Compatibility List (HCL) |
| Hypervisor Supported |
| VMware ESXi 6.x |
| Willing/able to add server to VMWare Hardware Compatibility List (HCL) |
| Hypervisor Supported |
| Hyper-V Server 2012 |
| Hypervisor Supported |
| Hyper-V Server 2016 |
| Hypervisor Supported |
| XENSERVER |
| OS Supported |
| WIN Server 2012 64-bit Supported |
| OS Supported |
| WIN Server 2016 64-bit Supported |
| OS Supported |
| Red Hat Enterprise Linux |
| OS Supported |
| Red Hat Enterprise Bare Metal OS Version 5.3 |
| OS Supported |
| Red Hat Enterprise Linux as Virtual Guest (Unlimited quest per socket) Standard |
PART II
3. Life Cycle Support is required for these devices. Please indicate the extent to which the product(s) meet or exceed specifications within the following relevant ILS requirements:
| ATTRIBUTE |
| PARAMETER |
| INDICATE OFFERED PRODUCT SPECIFICATIONS BELOW |
| Warranty |
| The contractor shall provide a minimum of 3 years of warranty from defect and workmanship along with flow-through OEM warranties from originating vendors. The contractor shall pass to the Government any component software (such as drivers), license agreements, or manufacturer warranties applicable to end items. The contractor shall maintain and deliver a Warranty Item Report |
Mean Time To Repair: The contractor shall provide a repair turnaround time of less than 24 hours from time of notification.
| EOL forecasting |
| The contractor shall provide to the Government a 6 month advance notification of component End of life or End of Sale. The contractor shall maintain an obsolescence data sheet on all internal components of server unit and deliver to the government upon request. |
| Reliability track record – documentation |
| Server unit failure rate shall be less than 2 percent of total population sold to US Government over any 12 month period. |
| Responsiveness |
| The contractor shall respond to the US Government TACNET Helpdesk within 12 hours of receipt of phone call or email request for technical assistance in troubleshooting of server unit. |
| LRUs |
| Server unit shall have hot swappable hard disk drives, power supply; swappable memory, video, fans and controllers. |
| Commonality |
| The 1RU, 2RU, and 3RU servers shall be built to common components to the greatest extent possible |
| Modularity/Scalability |
| The contractor shall respond to the US Government for requests related to changing a server components in order to meet different applications, i.e. changing SSD capacity, or adding fiber NICS to a chassis. |
| HCL Compliance |
| The 1RU, 2RU, and 3RU servers shall be on the hardware compliance list of the Microsoft and VMware software vendors. If the current hardware is not on the HCL, the contractor shall provide a plan and schedule to achieve HCL compliance. |
| TAA compliance |
| All components provided in server unit shall meet Trade Agreements Act of 1979 (TAA), Pub.L. 96–39, 93 Stat. 144 requirements. |
| UID: |
| IUID shall be implemented. The Contractor shall provide DoD unique item identification (UID) in accordance with DFARS clause 252.211-7003. The contractor shall comply with MIL-STD-130N(1) for IUID of the end item product |
| PHST |
| The contractor shall deliver the server units with required shipping containers and in accordance with ASTM-D-3951 Standard Practice for Commercial Packaging |
| Hazmat |
| The contractor shall document and deliver Material Safety Data Sheets (MSDS) for each identified hazardous material component within the server unit. MSDS shall be completed using Occupational Safety and Health Administration (OSHA) Form 174 and in compliance with 29 CFR 1910.1200 |
PART III
4. Environmental and Qualification Test (EQT) and certification specifically for Navy submarine platforms is required for these devices. EQT tests are conducted per the “Submarine Non-Propulsion Electronic System (NPES) Environmental Qualification Test (EQT) Requirements (Class Specific and Common) Specifications for Inboard Equipment” latest revision dated 7/8/2013. Please indicate the extent to which the product(s) meet or exceed specifications within the following relevant EQT references:
| ATTRIBUTE |
| PARAMETER |
| ABILITY TO MEET MINIMUM SPECIFICATIONS. (Y/N) |
| IF TESTED, TO WHAT EXTENT DID IT PASS? |
| AC POWER |
| MIL-STD-1399 SECTION 300B |
| EMI |
| MIL-STD-461F- CE101, CE102, CS101, CS114, CS116, RE101, RE102, RS101, RS103 |
MIL-STD-461C- CS06. RS02
| DC MAGNETIC |
| DOD-STD-1399 SECTION 070, PART I |
| STRUCTURE-BORNE NOISE |
| MIL-STD-740-2 |
| AIRBORNE NOISE |
| MIL-STD-1474D REQUIREMENT 5, GRADE A3 |
| TEMPERATURE |
| MIL-STD-801G - METHOD 501.5/502.5 OPERATING: 0 DEGREE C TO 50 DEGREES C, 2 HOURS AT EACH EXTREME |
NON-OPERATING -25 DEGREES C TO 60 DEGREES C, 2 HOURS AT EACH EXTREME
| HUMIDITY |
| MIL-STD-810G- METHOD 507.4 NOTICE 3 |
| VIBRATION |
| MIL-STD-167-1A - TYPE 1, DECK MOUNTED EQUIPMENT |
| OVERPRESSURE |
| OPERATIONAL - 24-36" MERCURY, 20 MINUTES |
NON-OPERATIONAL - 10-30 PSIA, 20 MINUTES
| PROHIBITED MATERIALS |
| MIL-HBK-2036 - PARA 4.12.1, TABLE VI |
| SHIP'S MOTIONS |
| OPERATIONAL - CYCLE RATE OF 5-7 CYCLES PER MIN. THROUGH ARC OF +/- 60 DEGREES, 15 MINUTES ROTATED 90 DEGREES AND TEST REPEATED |
| HERO |
| NAVSEA OP 3565 VOL. 2 REV 6 AND MIL-STD-464A HERO |
| HERP/HERF |
| NAVSEA OP 3565 VOL. 1 REV 6 AND MIL-STD-464A HERP/HERF |
| ALTITUDE |
| -300 to + 50,000 ft. |
* ALL EQT IS TO BE PERFORMED WITH SERVER INSTALLED IN AN ELECTRONIC EQUIPMENT ENCLOSURE/FIXTURE
5. Shock Requirements
| SPECIFICATION DESCRIPTION |
| SPECIFICATION |
| INDICATE THE EXTENT TO WHICH THE PRODUCTS MEETS OR EXCEEDS THE REFERENCED SPECIFICATIONS |
| 1 RU, 2 RU, and 3 RU Server Shock Requirements |
| SSN688, SSBN, SSGN CLASS: MIL-S-901C; GRADE A, ISOLATED ENCLOSURE; GRADE B, HARDMOUNTED ENCLOSURE; |
SSN774 CLASS: MIL-S-901D INTERIM CHANGE 1, GRADE A, CSES SIE BAYS, GRADE B, NON SIE ENCLOSURE;
SSN21 CLASS: PPD802-6337449, GRADE A, ISOLATED ENCLOSURE, GRADE B, HARDMOUNTED ENCLOSURE
1RU -
2RU –
3RU -
