7275V525-00309-UNCLAS_7275-V525_TOD.pdf

REF NO. OF DOCUMENT BEING CONTINUED

QQ-L-201F

FEDERAL SPECIFICATION

(a) Title, number, and date of this specification:

Lead sheet

QQ-L-201F dated 10 DEC 1962, including Amendment 2 dated 17 NOV 1970

(b) Grades, size, thickness, or weight and quantity required (see 1.2 and 3.4):

Grade: Grade C

Size: 60 INCH X 6 INCH

Thickness: 1/4 INCH

Weight: 41 LBS

Quantity: 150 EACH

(c) Alternate thickness tolerance when required (see 3.4.2): TOLERANCES AS SPECIFIED PER DRAWING

(d) Form of lead sheet if other than rolls (see 3.5): NA

(e) Identification by heat when required (see 4.2.3): REQUIRED; INSPECTION REPORTS NOT REQUIRED

(f) Applicable level of packaging, packing, and marking required (see section 5):

Packing: Level C PER FED. STD. NO. 102

Marking: PER FED. STD. NO. 123.

(g) Limit on bismuth in Grade B when required (see [2] of table I): MANUFACTURE PER SHAPE STL-6W OF

DRAWING 2301-3537, REV H IN ACCORDANCE WITH ALL GENERAL NOTES AND MATERIAL LISTS.

APPROVAL OF TWO FIRST ARTICLE SAMPLE PIECES PER NOTE 15 OF DWG. 2301-3537 REV H ARE

REQUIRED PRIOR TO FULL PRODUCTION RUN. THIS CHECK ENSURES PROPER MANUFACTURE,

FIT AND FINISH, MATERIAL USAGE, CORRECT WEIGHT, AND ACCEPTABLE TOLERANCES. THE

FIRST ARTICLE SAMPLES MUST INCLUDE ONE OF THE DETRIMENTAL MATERIAL CONTROL

QUALIFICATION OPTIONS PROVIDED IN GENERAL NOTE #6 OF THE DRAWING FOR ALL ITEMS

INVOKING GENERAL NOTE #6.

(h)

***CERTIFICATE OF COMPLIANCE REQUIRED***

Changes to specification or other technical requirements are not allowed without Shipyard approval via the Administrative

Contracting Officer (ACO).

JOB ORDER

3615R-86028

KEY OP

S02

KO ITEM

REV

IDN

7275-V525

IDN REV

2305.3 Form Rev 12/2016