Coherent Data Sheet.pdf

HighLight FL High-Power Multi-Mode Fiber Lasers with Beam Management The HighLightTM FL series of industrial, multi-kilowatt fiber lasers provides a cost-effective solution for many common welding tasks.

These lasers feature Coherent’s unique multi-stage back reflection immunity system which enhances reliability and lifetime, and enables safe processing of highly reflective materials, including brass, copper, and aluminum.

To maximize operational flexibility, HighLight FL products are equipped with either a Fiber-Fiber-Switch (FFS) or Fiber-Fiber-Coupler (FFC).

The FFS enables rapid switching of laser output between up to four separate process fibers, thus allowing time or energy sharing amongst four workstations with a single laser. The FFC allows easy exchange of process fibers on site.

FEATURES & BENEFITS

• Output power: 1,000 - 10,000 Watts

• Fiber-Fiber-Switch (FFS) or Fiber-Fiber-Coupler (FFC)

• Excellent stability over the entire power range (1% to 100%)

• Inherently back reflection safe

• Versatile production tool due to wide range of beam qualities

• Industry-leading closed loop power control for high process consistency

• Optimized power profile programming tool for welding processes

• CleanWeldTM technology to optimize welding results

BENEFITS

• Reliable and fast welding process

• High welding seam and welded part quality

• Minimized operating costs

APPLICATIONS

• Welding

• Cutting

HighLight FL Datasheet

SPECIFICATIONS HighLight FL1000 HighLight FL2000 Nominal Power (W) 1,000 2,000

Power Range (%) 1 - 100

Laser Beam Quality (BPP) at Collimator (mm x mrad)

50 μm: ≤ 2.5; 100 μm: ≤ 4; 150 μm: ≤ 6 200 μm: ≤ 8; 300 μm: ≤ 12; 400 μm: ≤ 16

Power Stability (%) ± 1

Pulse Frequency Range (kHz) CW - 10

Wavelength (nm) 1070 ± 10

ELECTRICAL RATINGS

Voltage (VAC) 400/440/480 ± 10%

Max. Connected Load (kVA) 4.4 7.1

Max. Effective Power at Nominal Laser Power at 400 V (kW)

4.2 6.9

Max. Current Consumption at 400 V (A) 6.1 9.9

Fuses Type NH (A) 16 32

COOLING

Recommended Cooling Capacity Laser (kW) 2.2 4.4

Recommended Cooling Capacity FFS/FFC and QHB/QD (kW)

FFS2: 1.0; FFS4: 1.5; FFC: 1.0

Flow Rate Laser (l/min) 21

Flow Rate for FFS/FFC and QBH/QD (l/min) FFS2: 8.0; FFS4: 12.0; FFC: 6.0

Temperature Laser (°C) 25 ± 1

Temperature for FFS/FFC and QBH/QD (°C) 24 - 40

Max. Pressure Laser (MPa) 0.5

Max. Pressure for FFS/FFC and QBH/QD (MPa) 0.4

Typical Pressure Drop Laser (MPa) 0.25

FIBER DELIVERY SYSTEM

Interface QBH/QD

Diameter (µm) 50 - 400

Length (m) 10, 15, 20, 30, 35 (other lengths on request)

DIMENSIONS & WEIGHTS

Laser Dimension L x W x H (mm) without signal tower

Midi: 794 x 1040 x 1067

Laser Weight (kg) FFC: < 400, FFS: < 450

ENVIRONMENTAL CONDITIONS

Ambient Temperature (°C) 5 - 40

Humidity (°C) Environmental conditions always below the dew point. Condensation to laser, QHB/QD and optics must be avoided during the operation, storage and transport.

CUSTOMER INTERFACE

Digital Signals (V DC) 24

Power Control (V DC) 0 - 10 V

Gate Control (V DC) 24, rise/fall time < 30 µs

OPTIONS LASER

Field bus (Ethernet/IP, Profinet, Profibus, Devicenet, Ethercat), Scanner control interface, Multi station interface

SPECIFICATIONS HighLight FL4000 HighLight FL5000 HighLight FL6000 Nominal Power (W) 4,000 5,000 6,000

Power Range (%) 1 - 100

Laser Beam Quality (BPP) at Collimator (mm x mrad)

100 μm: ≤ 4; 150 μm: ≤ 6; 200 μm: ≤ 8 300 μm: ≤ 12; 400 μm: ≤ 16

Power Stability (%) ± 1

Pulse Frequency Range (kHz) CW - 10

Wavelength (nm) 1070 ± 10

ELECTRICAL RATINGS

Voltage (VAC) 400/440/480 ± 10%

Max. Connected Load (kVA) 13.9 19.3 20.8

Max. Effective Power at Nominal Laser Power at 400 V (kW)

13.7 19.1 20.6

Max. Current Consumption at 400 V (A) 19.8 27.5 29.7

Fuses Type NH (A) 32 63

COOLING

Recommended Cooling Capacity Laser (kW) 8.9 11.1 13.3

Recommended Cooling Capacity FFS/FFC and QHB/QD (kW)

FFS2: 1.0; FFS4: 1.5; FFC: 1.0

Flow Rate Laser (l/min) 43 65

Flow Rate for FFS/FFC and QBH/QD (l/min) FFS2: 8.0; FFS4: 12.0; FFC: 6.0

Temperature Laser (°C) 25 ± 1

Temperature for FFS/FFC and QBH/QD (°C) 24 - 40

Max. Pressure Laser (MPa) 0.5

Max. Pressure for FFS/FFC and QBH/QD (MPa) 0.4

Typical Pressure Drop Laser (MPa) 0.25

FIBER DELIVERY SYSTEM

Interface QBH/QD

Diameter (µm) 100 - 400

Length (m) 10, 15, 20, 30, 35 (other lengths on request)

DIMENSIONS & WEIGHTS

Laser Dimension L x W x H (mm) without signal tower

Midi: 794 x 1040 x 1067

Laser Weight (kg) FFC: <460, FFS: < 520

ENVIRONMENTAL CONDITIONS

Ambient Temperature (°C) 5 - 40

Humidity (°C) Environmental conditions always below the dew point. Condensation to laser, QHB/QD and optics must be avoided during the operation, storage and transport.

CUSTOMER INTERFACE

Digital Signals (V DC) 24

Power Control (V DC) 0 - 10 V

Gate Control (V DC) 24, rise/fall time < 30 µs

OPTIONS LASER

Field bus (Ethernet/IP, Profinet, Profibus, Devicenet, Ethercat), Scanner control interface, Multi station interface

SPECIFICATIONS HighLight FL7500 HighLight FL8000 HighLight FL10000 Nominal Power (W) 7,500 8,000 10,000

Power Range (%) 1 - 100

Laser Beam Quality (BPP) at Collimator (mm x mrad)

100 μm: ≤ 4; 150 μm: ≤ 6; 200 μm: ≤ 8 300 μm: ≤ 12; 400 μm: ≤ 16

Power Stability (%) ± 1

Pulse Frequency Range (kHz) CW - 10

Wavelength (nm) 1070 ± 10

ELECTRICAL RATINGS

Voltage (VAC) 400/440/480 ± 10%

Max. Connected Load (kVA) 24.4 27.6 36.2

Max. Effective Power at Nominal Laser Power at 400 V (kW)

24.2 27.4 36

Max. Current Consumption at 400 V (A) 35 39.6 52

Fuses Type NH (A) 63

COOLING

Recommended Cooling Capacity Laser (kW) 16.7 17.8 22.2

Recommended Cooling Capacity FFS/FFC and QHB/QD (kW)

FFS2: 1.0; FFS4: 1.5; FFC: 1.0

Flow Rate Laser (l/min) 65 84

Flow Rate for FFS/FFC and QBH/QD (l/min) FFS2: 8.0; FFS4: 12.0; FFC: 6.0

Temperature Laser (°C) 25 ± 1

Temperature for FFS/FFC and QBH/QD (°C) 24 - 40

Max. Pressure Laser (MPa) 0.5

Max. Pressure for FFS/FFC and QBH/QD (MPa) 0.4

Typical Pressure Drop Laser (MPa) 0.25

FIBER DELIVERY SYSTEM

Interface QBH/QD

Diameter (µm) 100 - 400

Length (m) 10, 15, 20, 30, 35 (other lengths on request)

DIMENSIONS & WEIGHTS

Laser Dimension L x W x H (mm) without signal tower

Maxi: 794 x 1040 x 1565

Laser Weight (kg) FFC: <530, FFS: < 590

ENVIRONMENTAL CONDITIONS

Ambient Temperature (°C) 5 - 40

Humidity (°C) Environmental conditions always below the dew point. Condensation to laser, QHB/QD and optics must be avoided during the operation, storage and transport.

CUSTOMER INTERFACE

Digital Signals (V DC) 24

Power Control (V DC) 0 - 10 V

Gate Control (V DC) 24, rise/fall time < 30 µs

OPTIONS LASER

Field bus (Ethernet/IP, Profinet, Profibus, Devicenet, Ethercat), Scanner control interface, Multi station interface

1634837813E Highlight

1634837813E Highlight

1634837813E Highlight

1634837813E Highlight

1634837813E Highlight

1634837813E Highlight

1634837813E Highlight

1634837813E Highlight

1634837813E Highlight

1634837813E Highlight

1634837813E Highlight

MECHANICAL SPECIFICATIONS

Midi:

HighLight FL1000 - HighLight FL6000

• Verified dimensions FAI (First Article Inspection) and/or SPC

NOTE:

• Drawing must be used with 3D model. 3D is the master document and all shapes and dimensions must be according to 3D.

• Dimensions are for uncoated (blank) part, if not marked otherwise.

• All delivered parts (and assemblies) must be clean and burr free.

• Surface roughness is max Ra 6.3 µm, if not marked otherwise.

• All sharp edges should be removed for easy handling -edges and corners are allowed to have max R0.2mm if not marked otherwise.

• Tolerances according to SFS-EN 22768-1-m (linear and angular dimensions) and SFS-EN 22768-2-K (geometrical tolerances) (DIN ISO 2768-mK T1 and T2), if not marked otherwise.

Welding tolerances according to SFS-EN 13920-B and -F.

• Areas marked with ( or ) are class 1 surface area. Visible scratches, dents or other handling/ manufacturing defects are not allowed at class 1.

(Process follow up) are marked with numbered balloons.

can be added if needed for supplier process

MANUFACTURING MARKING NOTE:

Manufacturing marking is based on item code at title block:

1234567VV XY/FGH or PABCDE-VVV XY/FGH, where

• 1234567 or PABCDE is item code

• VV or -VVV is current item version

• XY is supplier name and location first letter

• /FGH is item serial number (running number) and tracking (like date, operator, testing etc.)

Restriction of Hazardous Substances in Electrical and

RoHS COMPLIANCE:

Used materials and components need to be RoHS compliant.

See latest EU Directive (

Electronic Equipment.

such as 2015/863/EU for "RoHS 3") for

SFS-EN 22768-2-K

3D MODEL

1:102D CODE-REV.

NAME DATE

2D DRAWING

APPROVED

1 / 2

ANY REPRODUCTION, IN WHOLE OR IN PART, WITHOUT A WRITTEN AUTHORIZATION OF COHERENT INC. (CORELASE OY) IS PROHIBITED.

ITEM NAME

SIZE A2

23.3.2020JLINITIAL CREATION

DIN ISO 2768-K T2

DIN ISO 2768-m T1

DIMENSIONS ARE IN mm (millimeter)

GENERAL TOLERANCES:

MACHINED

WELDED SFS-EN 13920-BF

SFS-EN 22768-1-m

SCALE

THE INFORMATION CONTAINED IN THIS DRAWING IS SOLE PROPERTY OF COHERENT INC. (CORELASE OY).

AND CONFIDENTIAL

23.3.2020

23.3.2020TK

23.3.2020JL

JL

ITEM CODE-REV. 1428471AA

3D CODE-REV.MATERIAL

SURFACE TREATMENT

DO NOT SCALE DRAWING

SHEET

PROPRIETARY

FI-33721 Tampere, FINLAND Kauhakorvenkatu 52

ARM-4xFFS Midi System Assembly

QD Cable

QD Cable Water IN

Water OUT QD Cable

QD Cable

Laser Water OUT (G1) Laser Water IN (G1)

Optics Water OUT (G1) Optics Water IN (G1)

G1/2

Coherent, Inc., 5100 Patrick Henry Drive Santa Clara, CA 95054

p. (800) 527-3786 | (408) 764-4983

f. (408) 764-4646 tech.sales@Coherent.com www.Coherent.com

Coherent follows a policy of continuous product improvement. Specifications are subject to change without notice.

Coherent offers a limited warranty for all HighLight Lasers. For full details of this warranty coverage, please refer to the Service section at www.Coherent.com or contact your local Sales or Service Representative.

MC-054-19-0M1119 Copyright ©2019 Coherent, Inc.

Coherent industrial lasers are designed in strict accordance with the respective safety regulations. We certify that each laser manufactured by our company complies with FDA Radiation Performance Standards, 21 CFR Subchapter J and with IEC 60825.

Warning labels as shown in the figure appear on each Coherent laser to indicate the respective classification.

HighLight FL Datasheet

MECHANICAL SPECIFICATIONS

Maxi:

HighLight FL75000 - HighLight FL10000

• Verified dimensions FAI (First Article Inspection) and/or SPC

NOTE:

• Drawing must be used with 3D model. 3D is the master document and all shapes and dimensions must be according to 3D.

• Dimensions are for uncoated (blank) part, if not marked otherwise.

• All delivered parts (and assemblies) must be clean and burr free.

• Surface roughness is max Ra 6.3 µm, if not marked otherwise.

• All sharp edges should be removed for easy handling -edges and corners are allowed to have max R0.2mm if not marked otherwise.

• Tolerances according to SFS-EN 22768-1-m (linear and angular dimensions) and SFS-EN 22768-2-K (geometrical tolerances) (DIN ISO 2768-mK T1 and T2), if not marked otherwise.

Welding tolerances according to SFS-EN 13920-B and -F.

• Areas marked with ( or ) are class 1 surface area. Visible scratches, dents or other handling/ manufacturing defects are not allowed at class 1.

(Process follow up) are marked with numbered balloons.

can be added if needed for supplier process

MANUFACTURING MARKING NOTE:

Manufacturing marking is based on item code at title block:

1234567VV XY/FGH or PABCDE-VVV XY/FGH, where

• 1234567 or PABCDE is item code

• VV or -VVV is current item version

• XY is supplier name and location first letter

• /FGH is item serial number (running number) and tracking (like date, operator, testing etc.)

Restriction of Hazardous Substances in Electrical and

RoHS COMPLIANCE:

Used materials and components need to be RoHS compliant.

See latest EU Directive (

Electronic Equipment.

such as 2015/863/EU for "RoHS 3") for

SFS-EN 13920-BFWELDED

APPROVED

1 / 2

ANY REPRODUCTION, IN WHOLE OR IN PART, WITHOUT A WRITTEN AUTHORIZATION OF COHERENT INC. (CORELASE OY) IS PROHIBITED.

ITEM NAME

SIZE A2

23.5.2019JLINITIAL CREATION

DIN ISO 2768-K T2

DIN ISO 2768-m T1

ITEM CODE-REV. 1426651AA

3D CODE-REV.MATERIAL

SURFACE TREATMENT

SFS-EN 22768-1-m

SCALE

THE INFORMATION CONTAINED IN THIS DRAWING IS SOLE PROPERTY OF COHERENT INC. (CORELASE OY).

AND CONFIDENTIAL

23.5.2019

23.5.2019TK

23.5.2019JL

JL

1:102D CODE-REV.

NAME DATE

2D DRAWING

DO NOT SCALE DRAWING

SHEET

PROPRIETARY

FI-33721 Tampere, FINLAND

3D MODEL

SFS-EN 22768-2-K

DIMENSIONS ARE IN mm (millimeter)

GENERAL TOLERANCES:

MACHINED

Kauhakorvenkatu 52

ARM-4xFFS System Assembly

Optics Water IN (G1)

Laser Water IN (G1) Laser Water OUT (G1)

Optics Water OUT (G1)

G1/2

80 737

Water OUT

Water IN QD Cable

QD Cable

QD Cable

794 929

QD Cable