USNS_CHARLES_DREW_TAKE10_ROH_2020_WI_INDEX_rev_D.doc
DOC document 458 KB Posted
- Attached to
- USNS CHARLES DREW ROH/DD
- Solicitation number
- N32205-19-R-6172
About this file
This sources sought notice is for the Repair and Overhaul Dry Docking (ROH/DD) of the USNS CHARLES DREW (T-AKE 10) commencing on or about 24 February 2020 at a contractor's facility on the West or Gulf Coast. Major work items include deck house cleaning and painting, preservation of RAS and UNREP king posts, 8 cylinder main diesel engine 30,000 hour maintenance, cleaning main generators and propulsion controls, cargo crane maintenance and testing, MMR AFFF system piping replacement, lifeboat certification and falls renewal, flight deck non-skid renewal, drydocking and undocking, propeller shaft and stern tube inspection, underwater hull cleaning and painting, and freeboard cleaning and painting. Interested small businesses must have a Master Ship Repair Agreement or Agreement for Boat Repair and submit capabilities packages by 5 September 2019 demonstrating ability to perform the work. The government anticipates awarding a contract by 10 January 2020. The NAICS code is 336611.
Revised WI Index
View the file
Other files
| File | Type | Posted |
|---|---|---|
| 0519_A_LTFW_COOLER_CLEANING_AND_GASKET_CHANGE.doc | DOC document | |
| 0010_A_FURNISH_OFFICE_FOR_OMT_REV.doc | DOC document | |
| 001-_WI_909__953_Anchor_Chain_Dupl_Scope_answered.doc | DOC document | |
| CDRL's.zip | ZIP file | |
| Solicitation_for_USNS_CHARLES_DREW_N3220519R6172__FY20.docx | DOCX document | |
| J_Documents.zip | ZIP file | |
| J_-_14_Technical_Data_Non-Disclosure.docx | DOCX document | |
| SYNOPSIS_N3220519R6172.docx | DOCX document |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
USNS CHARLES DREW (T-AKE 10)
N32205-14-R-3008
MILITARY SEALIFT COMMAND
NORFOLK, VIRGINIA
SPECIFICATIONS
FOR
USNS CHARLES DREW (T-AKE 10)
USCG No.: CG938614 ABS ID No.: 10202927 IMO No.: 9508287 N32205-19-R-6172
FEBRUARY 2020 ROH/DD AVAILABILITY
PRINCIPAL DIMENSIONS
LENGTH..........................................689 ft 0 in
BREADTH.......................................105 ft 7in
FULL LOAD WL............................30 ft 6 in ABL
GROSS TONNAGE.........................43,758 TONS
MAXIMUM DISPLACEMENT.......41,470 TONS
THIS SPECIFICATION CONSISTS OF THE FOLLOWING PAGES:
INDEX
PAGE 2 THRU 5
LIST OF DRAWING INDEX
PAGE 6 THRU 27
WORK ITEMS
001 THRU 1026
WORK ITEM INDEX
SECTION 000
GENERAL REQUIREMENTS
NOT SEPARATELY PRICED (NSP) REQUIREMENTS
REV DATE
INTENT, SCOPE, GENERAL REQUIREMENTS, AND DEFINITIONS
16 JUL 2018
TECHNICAL AND MANUFACTURER’S REPRESENTATIVES
1 MAY 2018
APPROACH, BERTH, AND MOORING REQUIREMENTS
29 JAN 2019
TESTING AND QUALITY ASSURANCE
20 JUL 2018
ELECTRICAL SAFETY PROCEDURE REQUIREMENTS
25 FEB 2014
HEAVY WEATHER PLAN
25 FEB 2014
COLD WEATHER PLAN
25 FEB 2014
CATEGORY “A” WORK ITEMS
REV DATE
FURNISH OFFICE FOR OVERHAUL MANAGEMENT TEAM
16 JUL 2018
FURNISH GENERAL SERVICES
25 FEB 2014
INFORMATION TECHNOLOGY
16 JUL 2018
PROJECT PLANNING AND PRODUCTION STATUS MONITORING REPORTS
10 DEC 2018
PREPARATION OF WEIGHT AND MOMENT REPORT
25 FEB 2014
INTEGRATED LOGISTICS AND GFM SUPPORT REQUIREMENTS
28 OCT 2018
FIRE PROTECTION AND SHIPS SAFETY PROGRAM
19 FEB 2019
HANDLING SHIP’S STORES
25 FEB 2014
DELIVERY AND REDELIVERY OF THE VESSEL
16 MAY 2018
SHIPBOARD ACCESS AND SECURITY
28 NOV 2018
GAS FREE CERTIFICATES
14 FEB 2014
CLEAN AND GAS FREE TANKS, VOIDS, COFFERDAMS AND SPACES
25 FEB 2014
MACHINERY SPACE TURN-OVER, DOCK TRIALS AND SEA TRIAL
19 FEB 2019
HAZARDOUS WASTE DISPOSAL AT A CONTRACTOR’S FACILITY
1 MAY 2016
PHYSICAL SECURITY AT PRIVATE CONTRACTOR’S FACILITY
28 NOV 2018
CATEGORY “B” WORK ITEMS
REV DATE
PHYSICAL SECURITY AT PRIVATE CONTRACTOR FACILITY REV
28 NOV 2018
CONTINUATION OF SERVICES
17 OCT 2018
SECTION 100
HULL STRUCTURE
CATEGORY “A” WORK ITEMS
REV DATE
BALLAST TANK ZINC INSPECTIONS
1 MAR 2018
OPEN, CLEAN AND INSPECT TANK VENT GOOSENECKS
1 MAR 2018
PRESERVATION OF FOREPEAK TANK 14 AUG 2019
DECK HOUSE CLEANING AND PAINTING NEAR WHITE BLAST
1 MAR 2018
PRESERVATION OF RAS STATION AND UNREP STATION KING POSTS
21 OCT 2018
TANK BOUNDARY TESTING AND STRUCTURAL SURVEY (ABS) REV 2
24 MAY 2017
HULL SURVEY SUPPORT SPECIAL SURVEY 2
31 MAR 2017
PORT AND STBD PLENUMS WEATHER TIGHT DOOR INSTALLATION TALT408
1 MAY 2015
DECK GRATING REPLACEMENT
25 OCT 2018
LOUVER REPLACEMENT
30 MAY 2019
HAND RAIL REPLACEMENT
16 APR 2019
PRESERVATION OF AFT MOORING STATION DECK
21 OCT 2017
POTABLE TANK PRESERVATION
23 SEPT 2019
SECTION 200
PROPULSION MACHINERY
CATEGORY “A” WORK ITEMS
REV DATE
PROPULSION MOTOR AND COOLER CLEANING AND INSPECTION
1 MAR 2018
MAIN ENGINE FLEX HOSE REPLACEMENT 10 YEAR
1 MAR 2018
MDE CONTROL SAFETY INSPECTION AND TEST
1 MAR 2018
AUTOMATION AND PROPULSION CONTROLS INSPECTION AND TEST
1 MAR 2018
VULKAN COUPLING ANNUAL INSPECTION
1 MAR 2018
PROPULSION MOTOR PEDESTAL BEARING INSPECTION
1 MAR 2018
8 CYLINDER MAIN DIESEL ENGINE 30000 HOUR SCHEDULED
24 JUL 2018
MAINTENANCE
MAIN DIESEL ENGINE START AIR SYSTEM FLUSH
31 MAR 2017
MAIN DIESEL ENGINE RESILIENT MOUNT REPLACEMENT
28 JAN 2018
MDE 1 THRU 4 START AIR SYSTEMS AND MEASURING DEVICE OVERHAUL
4 APR 2018
SECTION 300
ELECTRICAL
CATEGORY “A” WORK ITEMS
REV DATE
CLEAN MAIN GENERATOR AND PROPULSION CONTROL SYSTEM 10 YEAR
1 MAR 2018
HV-SS-E SWITCHBOARD INSPECTION AND CLEANING
1 MAR 2018
CONSILIUM CS3000 CONTROL PANEL UPGRADE
17 JUN 2019
TVSS INSTALLATION IN RADIO COMMUNICATIONS CENTER (T-ALT 412)
21 MAY 2013
EATON TIME DELAY REPLACEMENT TALT 496
12 JUN 2019
INTRUSION DETECTION SYSTEM GROOM
27 APR 2015
CHLOROPAC POWER SUPPLY SOURCE MODIFICATION (T-ALT 474)
15 JUL 2017
EDG SUPPLEMENTAL LUBE OIL COOLER INSTALL (T-ALT 359)
26 OCT 2018
GE GENERATOR STATOR CABLE REPLACEMENT SUPPORT
4 MAY 2019
CATEGORY “B” WORK ITEMS
REV DATE
OP4 STOREROOMS LIGHTING UPGRADE (T-ALT 374)
1 OCT 2013
SECTION 400
COMMUNICATIONS AND NAVIGATION
CATEGORY “A” WORK ITEMS
REV DATE
BRIDGE EQUIPMENT ANNUAL SERVICE
1 MAR 2018
ANTENNA PREVENTATIVE MAINTENANCE
1 MAR 2018
COMMUNICATIONS SYSTEM ANNUAL PREVENTATIVE MAINTENANCE
1 MAR 2018
OE-570 WSC ANTENNA SYSTEM MAINTENANCE
1 MAR 2018
ANTENNA RIGGING PHOTOS
1 MAR 2018
ECHO DEPTH SOUNDER PREVENTATIVE MAINTENANCE
24 SEP 2018
HYDRA RADIO GROOM (VR18-056)(T-ALT 472) 14 AUG 2019
CCSI ANNUAL RADAR SERVICE 14 AUG 2019
CCSI ANNUAL GYRO SYSTEM 14 AUG 2019
CCSI ANNUAL VDR RECERTIFICATION 14 AUG 2019
CCSI ANNUAL RADIO COMMUNICATION EQUIPMENT 14 AUG 2019
CCSI MAGNETIC COMPASS SERVICE 14 AUG 2019
SECTION 500
AUXILIARY MACHINERY SYSTEMS
CATEGORY “A” WORK ITEMS
REV DATE
SCBA ANNUAL INSPECTION
1 MAR 2018
504B
CARGO CRANE MAINTENANCE AND RETESTING 10 YEAR
1 MAR 2018
505 CARGO CRANE ADDITIONAL MAINTENANCE
17 OCT 2019
EMERGENCY DIESEL GENERATOR ANNUAL INSPECTION AND MAINTENANCE
1 MAR 2018
EMERGENCY DIESEL GENERATOR FLEX CONNECTION REPLACEMENT 5 YEAR
1 MAR 2018
MMR AFFF SYSTEM PIPING REPLACEMENT (T-ALT 394) 17 JUN 2019
DISTILLING PLANT MAINTENANCE 5 YEAR
1 MAR 2018
CALIBRATE AND TEST OILY WATER SEPARATORS
24 SEP 2018
MAGAZINE SPRINKLER GAUGE CALIBRATION
1 MAR 2018
RELIEF VALVE TESTING
1 MAR 2018
OPEN AND INSPECT AIR RECEIVERS AND HP AIR FLASKS
1 MAR 2018
SEWAGE SYSTEM PIPING CLEANING
1 MAR 2018
LTFW COOLER CLEANING AND GASKET CHANGE
17 OCT 2019
HTFW COOLER CLEANING AND REGASKETING
1 MAR 2018
FUEL OIL COOLER CLEANING AND GASKETING
24 OCT 2019
MAGAZINE SPRINKLER VALVE OVERHAUL
1 MAR 2018
MAIN DIESEL GENERATOR PEDESTAL BEARING INSPECTION RENK
1 MAR 2018
LTFW/CSW PUMP OVERHAULS
15 JUN 2019
LUBE OIL PURIFIER HEATER CLEANING
20 JUL 2019
INCINERATOR REPAIRS
27 AUG 2017
DISTILLING PLANT DUMP MOD TO SEA CHEST TALT 328
23 APR 2012
REPLACE CASCADE ORIFICE RESTRICTIVE DEVICE (CORD)
31 OCT 2018
ANCHOR WINDLASS ANNUAL INSPECTION
1 MAR 2018
CCSI RENEWAL SURVEY OF LIFTING DEVICES
18 NOV 2018
AFT STEERING MTR CTLR INDICATOR LIGHT RELOCATION TALT 503
24 FEB 2019
PRESERVATION OF CARGO CRANES NO 1 THRU 4
1 FEB 2019
FIXED GAS FIREFIGHTING SYSTEM INSPECTIONS AND TESTING
20 MAR 2019
FIXED FOAM FIREFIGHTING SYSTEM INSPECT AND TEST
20 MAR 2019
FIRE AND SMOKE DETECTION SYSTEM
20 MAR 2019
PORTABLE FIRE EXTINGUISHING SERVICE
20 MAR 2019
ANNUAL FIRE AND SMOKE DAMPER SERVICE
20 MAR 2019
CCSI DEEP FAT FRYER RANGE HOOD FIRE EXTINGUISHING SYSTEM
20 MAR 2019
CCSI FIRE HOSES (ANNUAL)
20 MAR 2019
CCSI FIRE DOORS AND SHUTTERS (ANNUAL)
20 MAR 2019
WATER MIST SYSTEM INSPECTION AND TEST
20 MAR 2019
CATEGORY “B” WORK ITEMS
REV DATE
BOW THRUSTER LUBE OIL PIPING MOD TALT 291
17 FEB 2014
FUELING AT SEA VALVE INSTALLATION TALT 265
30 APR 2010
VANE AXIAL FAN MOTOR OVERHAULS
17 SEP 2018
SECTION 600
OUTFIT, FURNISHINGS and HABITABILITY
CATEGORY “A” WORK ITEMS
REV DATE
ACCOMM LADDER INSPECTION AND LOAD TESTING 5 YEAR
1 MAR 2018
LIFEBOAT CERTIFICATION AND FALLS RENEWAL 5 YEAR
1 MAR 2018
RHIB BOAT CERTIFICATION AND FALLS RENEWAL 5 YEAR
1 MAR 2018
LIFE RAFT ANNUAL CERTIFICATION
1 MAR 2018
CCSI FLIGHT DECK PRESERVATION (1 X 3 Years)
1 MAR 2018
GALLEY AND MSO EQUIPMENT CALIBRATION
1 MAR 2018
VCHT CHECK VALVE INSTALLATION TALT 362
20 JUL 2017
LIFE BOAT AND RHIB GEL COAT PRESERVATION
28 FEB 2018
ENGINEERS OPERATING STATION DIELECTRIC FLOOR MAT REPLACEMENT
22 JUN 2019
FOOD WASTE AND GREY WATER TANK BLAST AND PAINT
11 JUN 2019
VCHT CLEAN OUT TUBE AND CAP REPAIR
7 JUL 2017
FLIGHT DECK SAFETY NET REPAIR
3 NOV 2015
633 STATEROOM SHOWER DECK PRESERVATION (VR18-064)
14 AUG 2019
PRC DECK REPLACEMENT
23 SEPT 2019
SECTION 800
HEATING, VENTILATION AND AIR CONDITIONING
CATEGORY “A” WORK ITEMS
REV DATE
GALLEY AND LAUNDRY EXHAUST DUCT CLEANING
1 MAR 2018
BRINE AND DEFROST PUMP AND MOTOR REPLACEMENT AND OVERHAULS
31 MAR 2017
AIR HANDLER UNIT HEATING COIL REPLACEMENT
28 SEP 2018
CARGO REFRIGERATION AND AIR CONDITIONING PLANT INSPECTION
16 OCT 2017
AND TESTING
853 CCSI ACCOMMODATION VENT SYSTEM CLEANING
14 AUG 2019
SECTION 900
DRYDOCKING AND UNDOCKING
CATEGORY “A” WORK ITEMS
REV DATE
DRY DOCKING AND UNDOCKING VESSEL
27 JUL 2016
PROPELLER SHAFT AND STERN TUBE INSPECTION WAFT SEAL
28 OCT 2015
FWD AND AFT STERN TUBE SEAL INSPECTION AND OVERHAUL REV A
30 MAR 2018
BOW THRUSTER MAINTENANCE 5 YEAR
1 MAR 2018
POLISH BOW THRUSTER PROPELLER
1 MAR 2018
RENEW SEACHEST, ROPE GUARD AND BOW THRUSTER ZINCS
1 MAR 2018
ANCHOR AND ANCHOR CHAIN RANGING
1 MAR 2018
OVERHAUL SEA VALVES
1 MAR 2018
INSPECT AND REPAIR CATHODIC PROTECTION
1 MAR 2018
SHAFT GROUNDING SYSTEM MAINTENANCE
1 MAR 2018
RENEW WATER PIECES
1 MAR 2018
UNDERWATER HULL CLEANING AND PAINTING NEAR WHITE BLAST
1 MAR 2018
FREEBOARD CLEANING AND PAINTING SPOT BLAST
1 MAR 2018
VALVE MOV GROOM
26 SEP 2016
CCSI RUDDER AND STERN FRAME EXAMINATION (5 YEAR)
1 MAR 2018
TAKE LINESHAFT BEARING REACTION READINGS SET 12
1 MAR 2018
CATEGORY “B” WORK ITEMS
REV DATE
DRY DOCKING AND UNDOCKING VESSEL
27 JUL 2016
BILGE KEEL REPAIRS
14 AUG 2019
TAKE LINESHAFT BEARING REACTION READINGS SET 34
1 MAR 2018
TAKE LINESHAFT BEARING REACTION READINGS POST SEA
1 MAR 2018
SECTION 1000
UNREP GEAR
CATEGORY “A” WORK ITEMS
REV DATE
SLIDING BLOCK CHAIN REPLACEMENT AND ASSOCIATED EQUIPMENT
29 MAY 2019
REFURBISHMENT
RAM TENSIONER AND CARGO KINGPOST SHEAVE REFURBISHMENT
20 MAY 2019
UNREP FAS FAIRLEAD AND SOT BLOCK REFURBISHMENT
20 MAY 2019
400HZ AND 28VDC AND WINDBIRD RECERTIFICATION
28 FEB 2018
CATEGORY “B” WORK ITEMS
REV DATE
TRANSFER HEAD REFURBISHMENT
20 MAY 2019
DRAWING /REFERENCE INDEX
USNS CHARLES DREW (TAKE 9)
| Work Item |
| Reference |
| Drawing/Reference Title |
| 001 |
| 2.1 |
| MSC 803-7081122, Military Sealift Command General Technical Requirements (GTR's) |
| 003 |
| 2.1 |
| Mil STD Mil-DTL-28628D, dtd July 1991; Camels |
| 2.2 |
| Mil STD Mil-F-29248, dtd 21 November 1986; Fenders, Marine, Foam Filled, Netless |
| 2.3 |
| MSC Drawing No. 802-8498924, General Arrangement Plan |
| 2.4 |
| MSC Drawing No. 835-7489033, Mooring Arrangement |
| 2.5 |
| MSC Quality Management System Procedures Manual; EPI N0721-001.00-AQ – UNDER KEEL CLEARANCE |
| 004 |
| 2.1 |
| Mil-I-45208, (Series), Inspection Systems |
| 005 |
| 2.1 |
| High Voltage Awareness Instruction Guide PowerPoint |
| 2.2 |
| High Voltage Awareness PowerPoint Presentation |
| 2.3 |
| MSC Safety Management System Procedure 2.1-004-All, Lock-out/ Tag-out |
| 2.4 |
| MSC Safety Management System Procedure 2.1-016-AKE, High Voltage System |
| 2.5 |
| 29 CFR 1910.335 Electrical Safety Related Work Practices; Safeguards for Personnel Protection |
| 2.6 |
| NFPA 70E Standard for Electrical Safety Requirements for Employee Workplaces |
| 006 |
| 2.1.1 |
| MSC Drawing No. 835-8498940, USNS CHARLES DREW Trim and Stability Booklet. |
| 007 |
| 2.1 |
| MSC Drawing No. 835-8498940, USNS CHARLES DREW Trim and Stability Booklet. |
| 011 |
| 2.1.1 |
| MSC Drawing No. 802-8498924, General Arrangements |
| 2.1.2 |
| MSC Chemical Treatment Handbook |
| 015 |
| 2.1 |
| DOD Security Manual for Safeguarding Classified Information, DOD Manual 5220.22-M |
| 016 |
| 2.1 |
| NFPA 312, Standard for Fire Protection of Vessels During Construction, Repair and Lay-Up |
| 2.2 |
| NFPA 51B, Standard for Fire Prevention in use of Cutting and Welding Processes |
| 2.3 |
| 2.3. |
OSHA Fire Protection while in a shipyard, 29 Code of Federal Regulations (CFR) Part 1915.506
| 2.4 |
| 2.4. |
OSHA Confined Space Entry Program, 29 Code of Federal Regulations (CFR)Part 1910.146
| 018 |
| 2.1 |
| NAVMED P-5010-6, Manual of Naval Preventive Medicine, Chapter 6, Water Supply Afloat |
| 2.2 |
| MSC Drawing #835-7489033, Mooring and Towing Arrangement |
| 019 |
| 2.1 |
| COMSCINST 5530.3C, MSC Shipboard AT/FP Program |
| 2.2 |
| NAVSEA Standard Item 009-72, 9 May 2011 |
| 021 |
| 2.1.1 |
| MSC Dwg 801-8298899, USNS CHARLES DREW Capacity Plan |
| 2.1.2 |
| MSC Dwg 835-8498940, USNS CHARLES DREW Trim and Stability Booklet |
| 023 |
| 2.1.1 |
| Resource Conservation and Recovery Act (RCRA) as Amended |
| 2.1.2 |
| 10 USC 7311 |
| 2.1.3 |
| Applicable Uniform Hazard Waste Manifest Form |
| 2.1.4 |
| Test Methods for Evaluating Solid Waste, Physical/Chemical Methods; EPA Document, SW-846: The Official compendium of analytical and sampling methods that have been evaluated and approved for use in complying with the RCRA regulations. |
| 2.1.5 |
| OPNAVINST 5090.1C |
| 024 |
| 2.1 |
| COMSCINST 5530.3 Series, Military Sealift Command (MSC) Shipboard Antiterrorism (AT) Program |
| 2.2 |
| NAVSEA Standard Item 009-72 “CURRENT FY REVISION”, Physical Security at Private Contractor’s Facility |
| 2.3 |
| 33 C.F.R. Part 165, Regulated Navigation Areas and Limited Access Areas |
| 101 |
| 2.1 |
| NAVSEA Drawing 631-7489175, Corrosion Prevention of Ballast Tanks |
| 102 |
| 2.1.1 |
| MSC DWG 506-8498942 Rev C – Vents, Sounds and Overflows System Diagram |
| 104 |
| 2.1 |
| NAVSEA Dwg 802-7488866 Rev U - General Arrangement |
| 2.2 |
| Surface Preparation Standard No. 10 (SSPC-SP-10) Blast to Near White Metal |
| 2.3 |
| COMSCINST 4750.2 Preservation Instructions for MSC Ships |
| 2.4 |
| PPG-PMC MSC Handbook |
| 2.5 |
| SSPC Good Painting Practices volume 1, fourth edition |
| 2.6 |
| SSPC Systems and Specification, volume 2, Eight Edition |
| 2.7 |
| SSPC PA-2 Measurement of Dry Coating Thickness with Magnetic Gages |
| 105 |
| 2.1 |
| Steel Structures Painting Council, Good Painting Practice, Volume 1, Fourth Edition. |
PPG-PMC MSC Handbook
| 107 |
| 2.1 |
| Steel Structures Painting Council, Good Painting Practice, Volume 1, Fourth Edition. |
| 2.2 |
| Steel Structures Painting Council, System and Specifications, Volume 2, Eighth Edition. |
| 2.3 |
| SSPC SP10, Near-White Metal Blast Cleaning |
| 108 |
| 2.1 |
| NAVSEA Drawing 801-8193655, Capacity Plan |
| 2.2 |
| NAVSEA Drawing 835-8498940 REV A, Trim & Stability Booklet and Loading Manual USNS CHARLES DREW TAKE9 |
| 2.3 |
| ABS Rules for Survey After Construction; Part 7 Chapter 3, Section 2 |
| 110 |
| 2.1 |
| ABS Steel Vessel Rules |
| 121 |
| 2.1.1 |
| MSC Drawing #131-8495271, Weather Tight Door Install P&S Plenum |
| 124 |
| 2.1 |
| Steel Structures Painting Council, Good Painting Practice, Volume 1, Fourth Edition. |
| 2.2 |
| Steel Structures Painting Council, System and Specifications, Volume 2, Eight Edition. |
| 2.3 |
| SSPC SP11, Power Cleaning to Bare Metal |
| 129 |
| 2.1.1 |
| MSC Drawing No. 802-8498924, General Arrangement. |
| 2.1.2 |
| Cascade General DWG, Ship Vent Louver Modification |
| 131 |
| 2.1 |
| Surface Preparation Standard No. 10 (SSPC-SP 10) of the steel structures painting council manual |
| 2.2 |
| Surface Preparation Standard SSPC-SP 11, Power Tool Cleaning To Bare Metal |
| 2.3 |
| Surface Preparation Standard, SSPC-SP 12/NACE 5, Surface Preparation and Cleaning of Metals by Water jetting Prior to Recoating |
| 201 |
| 2.1 |
| Technical Manual T9235-AG-MMC-010; Propulsion Motor, Synchronous, Motor Design M3HSX 305-126/16 |
| 2.2 |
| General Electric Power Conversion, Service Bulletin T-AKE-SB-0014, Dtd 15 October 2017 |
| 202 |
| 2.1 |
| Technical Manual T9233-CF-IMC-070; Diesel Engines, Main Power Generation Models 48/60 8L And 9L |
| 204 |
| 2.1 |
| MSC DWG 079-8498935, MCCS Periodic USCG Safety Test Procedure (PSTP) |
| 205 |
| 2.1 |
| MSC DWG 079-8498935, MCCS Periodic USCG Safety Test Procedure (PSTP) |
| 2.2 |
| Technical Manual, T9235-AN-MMC-010, T-AKE Propulsion Control System |
| 2.3 |
| Technical Manual, T9235-AJ-MMC-010,030,050, T-AKE Machinery Centralized Control Station |
| 2.4 |
| ABS Current version SVR, ACCU notation. |
| 2.5 |
| ABS Current Version Integrated Quality Software Management (ISQM) |
| 206 |
| 2.1 |
| Technical Manual, VULKAN Coupling, Tech Doc DOKU1G531W0013E |
| 2.2 |
| Technical Manual T9233-CF-1MC-070/020; Diesel Engines, Main Power Generation, Model 9L 48/60 and 8L 48/60, Volume E1-E4 for Main Diesels |
| 2.3 |
| T-AKE Class Notice 015 – Main Diesel Generator Couplings |
| 207 |
| 2.1.1 |
| T/M T9235-AG-MMC-010, Propulsion Motor, Synchronous, Motor Design M3HSX 305-126/16 |
| 216 |
| 2.1 |
| T/M T9233-CF-IMC-010; Diesel Engines, Main Power Generation, Models 9L 48/60 and 8L 48/60, Volume B1, Engine Operating Instructions |
| 2.2 |
| T/M T9233-CF-IMC-020; Diesel Engines, Main Power Generation, Models 9L 48/60 and 8L 48/60, Volume B2, Engine Working Instructions |
| 2.3 |
| T/M T9233-CF-IMC-060; Diesel Engines, Main Power Generation, Models 9L 48/60 and 8L 48/60, Volumes C1, C2 &C3 , Exhaust Gas Turbocharger |
| 2.4 |
| MSC Dwg No. 081-8498668 Rev A, T-AKE FM-MAN 48/60 Main Diesel Engine 30,000 Hour 8/9L Scheduled Maintenance Service Report |
| 221 |
| 2.1 |
| MSC DWG 551-8498910; Diesel Generator Starting Air System Diagram |
| 2.2 |
| MSC DWG MSC DWG 505-7488748, Flushing Criteria and Guidelines |
| 222 |
| 2.1 |
| T9233-CF-IMC-010_Rev 2 MDG Mod 48_60 8_9L Vol B Install_Ops_Maint Manual |
| 224 |
| 2.1 |
| T/M T9233-CF-IMC-020; Diesel Engines, Main Power Generation, Models 9L 48/60 and 8L 48/60, Volume B2, Engine Working Instructions |
| 2.2 |
| T/M T9233-CF-IMC-030; Diesel Engines, Main Power Generation, Models 9L 48/60 and 8L 48/60, Volumes C1, C2, C3, Turbocharger Operating and Working Instructions/Spare Parts Catalog |
| 301 |
| 2.1 |
| Safety Management System 2.1-016-AKE/AKE(RM), High Voltage(HV) Systems |
| 2.2 |
| NAVSEA Tech Manual T9235-AK-MMC-010, Generator, Synchronous 6600V, 60 HZ Including Generator Excitation Control Panel |
| 2.3 |
| NAVSEA Tech Manual T9235-AM-MMC-010, Transformers, Propulsion, Type THT 12 HN 7M2/N |
| 2.4 |
| NAVSEA Tech Manual T9235-AN-MMC-010, T-AKE Propulsion Control System |
| 302 |
| 2.1 |
| T-AKE Class Notice 38 dated 4 Nov 2014, “HV CABLE CRIMP CONNECTORS” |
| 2.2 |
| T-AKE ALL HV CABLE SURVEY-3Nov14-Excel 97-2003 version |
| 2.3 |
| 2014 HV Lug Inspection Procedure on T-AKE 3 11-10-14 R2 |
| 303 |
| 2.1.1 |
| Safety Management System 2.1-016-AKE/AKE(RM), High Voltage(HV) Systems |
| 2.1.2 |
| Technical Manual T9235-AL-MCC-010; Main Power Switchboard, 6.6 KV, 2500A |
| 2.1.3 |
| Technical Manual T9324-BU-MMC-010; Switchboards Ships Service 480V |
| 2.1.4 |
| Technical Manual T9324-BT-MMC-010; Emergency Switchboard 480V Dwg 2838 For TAKE |
| 2.1.5 |
| Cutler Hammer, I.B. 32-255-1G, Instructions for Installation, Operation and Maintenance of Type VCP-W Vacuum Circuit Breakers |
| 304 |
| 2.1 |
| Technical Manual TE168-BE-MMC-010; Detection System, Fire and Smoke Installation, MDL CS3000; Operation, and Maintenance Instructions. |
| 2.2 |
| Consilium Salwico Cargo Addressable Fire Detection System, Service and Maintenance Manual |
| 2.3 |
| Consilium Salwico Cargo Addressable Fire Detection System, User Manual |
| 321 |
| 2.1 |
| MSC Drawing 331-7488807, SRD: LIGHTING SYSTEM BWD, ACCOMMODATIONS 01 AND 02 LEVELS (SRD REV B) |
| 2.2 |
| MSC Drawing 331-7488808, SRD: BWD, MACHINERY SPACE LIGHTING |
| 2.3 |
| MSC Drawing 331-7488809, SRD: BWD, CARGO AND MISCELLANEOUS SPACES LIGHTING |
| 2.4 |
| PC 1 - RIG-A-LITE Product Sheet SAFJ Series LED Fixtures and Certificates (9) Sheets, SAFJ06-1LMS Hazardous LED Fixture, 45Watt 120-277VAC, 5000k, Clear lens |
| 323 |
| 2.1 |
| NAVSEA Dwg 320-8499066; Electrical System One Line Diagram |
| 2.2 |
| MSC Dwg. No. WI 402 WKG DWG; TVSS Installation |
| 2.3 |
| “TVSS Installation” Procedure and photos for Installation of the TVSS system for EP111 & EP105 |
| 2.4 |
| Warning Placard |
| 325 |
| 2.1 |
| MSC Drawing 320-8498838, Electrical System One Line Diagram |
| 2.2 |
| Point Eight Power DWG 2876 |
| 326 |
| 2.1 |
| Tech Manual L-T5389-COT-010 – SHIP SYSTEM MANUAL FOR INTRUSION DETECTION SYSTEM (IDS) |
| 327 |
| 2.1.1 |
| MSC Drawing 803-7081122, Military Sealift Command General Technical Requirements (GTRs) |
| 2.1.2 |
| MSC Drawing 802-8498924, General Arrangement |
| 2.1.3 |
| MSC Drawing 320-8498914, Electrical System One Line Diagram |
| 2.1.4 |
| MSC Drawing 320-8497785, Chloropac Power Supply Source Mod |
| 2.1.5 |
| Technical Manual T6262-AF-MMC-010, Motor Control Centers, Individual Controllers and Misc Panels for USNS Lewis and Clark (T-AKE 1) Class |
| 328 |
| 2.1 |
| MSC Drawing No. 260-8393845 EDG Bearing Supplemental Lube Oil Cooler Installation |
| 2.2 |
| MSC Drawing No. 300-8393846 EDG Lube Oil Cooler Electrical Installation |
| 2.3 |
| Enclosure 1, Reference Photos |
| 2.4 |
| Technical Information: Southwest Thermal Air Exchanger, Model # BOL-8 |
| 401 |
| 2.1 |
| NGSM 9200266-31 User Manual for VDR Explorer VM II III IV |
| 2.2 |
| NG-SPERRY BRIDGE MASTER E RADAR SERVICE MANUAL NO. 65800011 |
| 402 |
| 2.1 |
| USNS CHARLES DREW (T-AKE 10) SHIP ANTENNA LEGEND (provided by N6 Rep) |
| 2.2 |
| Whip Antenna Maintenance PMS 4411/023, U10 |
| 2.3 |
| Dipole Antenna Maintenance PMS 4411/006 |
| 2.4 |
| NAVSEA Standard-Item 009-32 |
| 2.5 |
| Surface Force Logistics Center (SFLC) Standard Specification 6310 |
| 403 |
| 2.1 |
| Technical Manual EE682-AA-MMC-020; 1AN/USQ-155 |
| 2.2.1 |
| TVS-AN/USQ-155_MIP 4416/510_M1 |
| 2.2.2 |
| TVS-AN/USQ-155_MIP 4416/510_S-1 |
| 2.2.3 |
| OE-570-MIP 4411/019 MRCS R-1 and Q-1 |
| 2.3 |
| Technical Manual EE100-JK-INM-010; RF-5800 400W COMM SYSTEM |
| 2.4 |
| Technical Manual EE172-AB-OMI-010; AN/URN-25 TACAN |
| 2.5 |
| Technical Manual EE685-W7-SUM-010; AN/SYQ-26 NAVMACS II |
| 2.6 |
| Technical Manual EE111-DA-OMI-010/0A-9123,OA-9277 (T-AKE 1-9) |
| 404 |
| 2.1 |
| Technical Manual EE 134-AT-OMP-010; OE-570-WSC |
| 405 |
| 2.1.1 |
| NAVSEA Instruction 9405.1B, “NUMBERING IDENTIFICATION SYSTEM FOR SURFACE SHIP ANTENNAS” |
| 426 |
| 2.1 |
| TE 360-AV-MMC-010 / 0910-LP-104-3397 Installation Technical Manuals |
| 436 |
| 2.1 |
| DWG 436-7489064 REV C, “BWD UHF WIRELESS COMMUNICATION” |
| 2.2 |
| TE100-A6-MMC-020 “HYDRA Communication System (P7100) AN/SRC-55(V) SYSTEMS” |
| 502 |
| 2.1 |
| SMS Procedure 2.3-002-ALL Rev 2.6 - SCBA |
| 504B |
| 2.1 |
| ABS Guide for Certification of Lifting Appliances, Chapter 2 Guide for Certification of Cranes, Section 7 Surveys |
| 2.2 |
| T-AKE-1 Class Cargo Crane Recertification Test Procedure; Test No:8390285 Rev/Chg:01 |
| 2.3 |
| Tech Manual TG811-BL-MMC-010/TG811-BN-MMC-010, Boom Crane, Electro-Hydraulic DWG AMD-1975 |
| 2.4 |
| Dwg. No. 573-8392503, Hose List Appleton Cargo Crane |
| 2.5 |
| NAVSEA Dwg. No. 803-6397427, Rev. A; Links Radio Frequency, High-Voltage Insulator Link, Cylinder Type |
| 2.6 |
| Appleton Marine, Inc., Memo FSR-16136-01, dated 06 June, 2011, Recommended Wire Rope Spelter Anchorage Inspection, Lubrication and Preservation Procedure |
| 2.7 |
| Appleton Marine, Inc., ABS Required – Turntable Bearing Tilt Test Procedure/Log Book |
| 2.8 |
| Hyd Boom Cyl First Telescoping YMD-8842 |
| 2.9 |
| Hyd Boom Cyl Second Telescoping YMD-8843 |
| 2.10 |
| Appleton Crane Boom Rebuild Reference |
| 506 |
| 2.1 |
| T9312-AY-IMC-010, High Displacement Marine Auxiliary Engine/Emergency Diesel Generator Model 3516B VOL1 Part1 |
| 2.2 |
| MSC DWG 079-83XXXX, MCCS Periodic Safety Test Procedures (PSTP) |
| 507 |
| 2.1 |
| Technical Manual T9312-AY-IMC-010; High Displacement Marine Auxiliary Engine/Emergency Diesel Generator Model 3516B VOL 1 Part 1 |
| 2.2 |
| Technical Manual T9312-AY-IMC-020; Technical Manual - High Displacement Marine Auxiliary Engine/Emergency Diesel Generator Model 3516B VOL 1 Part 2 |
| 2.3 |
| Technical Manual T9312-AY-IMC-030; Technical Manual - High Displacement Marine Auxiliary Engine/Emergency Diesel Generator Model 3516B VOL 2 |
| 508 |
| 2.1 |
| MSC Drawing 555-8494867, Rev A, Contract Guidance Drawing, T-AKE 1 Class, MMR AFFF System Piping Replacement Modification |
| 2.2 |
| MSC Drawing 555-8387000, Rev -, Selected Record Drawing Foam Firefighting System Diagram |
| 2.3 |
| MSC Standard Drawing 803-7081122, Military Sealift Command General Technical Requirements (GTRs) |
| 2.4 |
| MSFSC SMS Procedure 2.1-004-All, Tagout/Lockout |
| 2.5 |
| ASTM Standard F1166, Standard Practice for Human Engineering Design for Marine Systems, Equipment, and Facilities |
| 2.6 |
| NAVSEA Drawing No. 505-7488748 T-AKE 1 Class Flushing Procedures |
| 2.7 |
| MSC Drawing 631-7488891, T-AKE Class, Paint Schedule |
| 509 |
| 2.1 |
| NAVSEA Dwg. 531-7488738 SRD-Distilling Plant Sys Diag |
| 2.2 |
| NAVSEA T/M T9531-AU-MMC-010; Distilling Plant And Bromination Disinfection System, Model SPD35-53TPD |
| 510 |
| 2.1 |
| T/M T9550-AW-MMC-010, Separator, Oily Water, Heli-Sep Model 5000-J5852 (Available Onboard) |
| 2.2 |
| T/N T9550-AU-MMC-010, Separator, Oily Water, Oil Content Detector (Available onboard) |
| 515 |
| 2.1 |
| NAVSEA 551-7488733, SRD, Ship Service & Control Air System Diagram |
| 2.2 |
| NAVSEA 551-7488862, SRD, High Pressure Air System Diagram |
| 2.3 |
| W-ST-001-02-03_A – Main Diesel Engine Starting Air Receiver Tank |
| 2.4 |
| W-ST-002-96-03_ - Receiver Starting Air for Ship’s Emergency Diesel Generators |
| 2.5 |
| W-ST-003-96-03_ - Air Receiver, Control |
| 2.6 |
| W-ST-004-96-03_ - Air Receiver, Ship’s Service |
| 2.7 |
| NSTM 551 – Compressed Air Plants and Systems |
| 516 |
| 2.1.1 |
| Technical Manual T9593-AC-MMC-010; Marine Sanitation Device and Vacuum Collection, Holding and Transfer System for T-AKE |
| 2.1.2 |
| NAVSEA Dwg No. 528-8498865, Vacuum Sewage and Plumbing Drains System Diagram |
| 520 |
| 2.1 |
| T9532-A2-MMC-010 Heat Exchanger, Plate, High Temp, Operation And Maintenance |
T9532-A2-MMC-010 Heat Exchanger, Plate, High Temp, Operation And Maintenance
| 523 |
| 2.1 |
| SMS Procedure 2.3-002-ALL – SCBA |
| 2.2 |
| 49 CFR 180.205 GENERAL REQUIREMENTS FOR REQUALIFICATION OF SPECIFICATION CYLINDERS |
| 525 |
| 2.1 |
| T9516-A8-MMC-01; Technical Manual for Refrigeration Plant, Cargo for USNS AKE 1 Class |
| 527 |
| 2.1 |
| MSC DWG 516-8498828; Cargo Refrigeration Secondary Coolant Circ System Diagram |
| 528 |
| 2.1 |
| T/M S6435-RZ-MMM-010; Valves Sprinkler, Navy Standard, Sizes 1-1/2″ Through 8″, Dwg. No. 803-639-7408 |
| 2.2 |
| T/M S9522-AA-HBK-010 Rev 4, Description, Operation and Maintenance Handbook for Magazine Sprinkling Systems |
| 2.3 |
| NAVSEA Drawing NO. 471-342-7104 REV D; “CARGO HOLD SPRINKLING SYSTEM DIAGRAM” |
| 530 |
| 2.1.1 |
| T9235-AK-MMC-010, Technical Manual Generator, Synchronous,6600V 60HZ, Including Generator Excitation Control Panel |
| 541 |
| 2.1 |
| MSC T/M T6225-LL-MMC-010, Buffalo Pump Technical Manual for VHSM Size 16” LT Fresh Water Cooling Pump |
| 544 |
| 2.1.1 |
| MSC Dwg No. 541-7488729, Fuel Fill, Transfer and Purification System Diagram |
| 2.1.2 |
| T9261-AU-MMC-010 Technical Manual SEPARATOR, LUBE OIL, MODEL OSD 18-91-067/18 |
| 545 |
| 2.1 |
| Technical Manual T9593-DD-MMC-010 INCINERATOR, TYPE ATLAS 800 LS WS P WITH WEDGE BELT DRIVEN FAN |
| 547 |
| 2.1.1 |
| NAVSEA Dwg 556-7488740, Hydraulic Piping systems Diagram |
| 2.1.2 |
| MSC Dwg 556-8390670, Bow Thruster Lube Oil System Mod |
| 2.1.3 |
| T9568-A2-MMC-010, Bow Thruster Installation Manual, Type TT2200 |
| 2.1.4 |
| MSC General Technical Requirements (GTR) Dwg 803-7081122 |
| 2.1.5 |
| DWG 505-7488748, Flushing Criteria and Guidelines |
| 549 |
| 2.1 |
| MSC Dwg 531-8391806 Distillate Dump to Sea Chest Mod |
| 2.2 |
| NAVSEA Dwg 256-8498907 Central Seawater Cooling System Diagram |
| 2.3 |
| NAVSEA Dwg 531-7488738 Distilling Plant Systems Diagram |
| 550 |
| 2.1 |
| MSC Drawing No. 803-7081122, General Technical Requirements (GTR) |
| 2.2 |
| MSC Drawing No. 541-8390650 Rev -, FAS Stop Valve Installation Diagram |
| 2.3 |
| NAVSEA Dwg No. 541-8498824 Rev , SRD – Cargo Fuel System Diagram |
| 552 |
| 2.1 |
| Tech Manual T9555-CQ-MMC-010; Fire Extinguishing System, Crossflow Water Mist, Installation, Operation, and Maintenance Manual, Novenco A/S |
| 554 |
| 2.1.1 |
| NAVSEA Dwg 512-7488751 Rev D, HVAC Diagram Machinery Rooms and Ancillary Spaces. |
| 2.1.2 |
| Technical Manual T9513-AE-MMC-010, Ventilation Fans and Dampers |
| 2.1.3 |
| STANDARD ITEM NO. 49, REVISED 2 APRIL 1993, RECONDITION VENTILATION FANS & MOTORS, SQUIRREL CAGE (AC) SERVICE (Copy Provided Upon Request) |
| 555 |
| 2.1 |
| 803-5196808, “Cascade Orifice Restrictive Device (CORD) for Surface Ships” |
| 557 |
| 2.1 |
| Tech Manual TG813-BV-MMC-010, Electrically Driven Deck Machinery Models |
| 2.2 |
| NAVSEA Dwg. No. 581-7489016, Anchor Handling Arrangement and Details |
| 2.3 |
| NAVSEA Dwg. No. 582-7488906, Mooring Arrangement and Details Forward and Towing Package |
| 2.4 |
| NAVSEA Dwg. No. 100-7489051, Forecastle (FS Zone) |
| 2.5 |
| T-AKE Anchor Windlass SAMM Maintenance pdf (133 pages) |
| 558 |
| 2.1.1 |
| Technical Manual TG818-AW-MMC-010 Rev 1 Cargo Weapons Elevator Technical Manual VOL 1 |
| 2.1.2 |
| Oldenburg, Lake Shore DWG F004972 |
| 559 |
| 2.1.1 |
| T9561-BR-MMC-010 Technical Manual Steering Gear, Rotary Vane, Model # RV 2150-3, and Shorthorn Rudder for T-AKE 1 Class |
| 560 |
| 2.1 |
| COMSC Instruction 4700.16: MSC’s General Technical Requirements |
| 2.2 |
| MSC Drawing No. 803-7080803: Computer-Aided Design (CAD) Drawings Standard |
| 2.3 |
| NAVSEA Drawing No. 631-7488891: Paint Schedule |
| 2.4 |
| NAVSEA Drawing No. 635-7489054: Insulation Arrangement/Accommodation |
| 2.5 |
| MSC Drawing No. 593-8613592: Novoflow Model NDCF-1-10-374 HSRMS Piping Systems Install Arrangement & details |
| 2.6 |
| MSC Drawing No. 320-8613593: Novoflow Model NDCF-1-10-374 HSRMS Electrical Power and Controls Arrgmt & Details |
| 2.7 |
| MSC Drawing No. 593-8613594: Novoflow Model NDCF-1-10-374 HSRMS Outfit Arrangement & Foundations Details |
| 2.8 |
| Technical Manual S9596-CD-GYD-010: Design & Installation Guidance, Oil Content Monitor (ET-35N) |
| 2.9 |
| Operation Manual NAG2531: Turner Designers TD-107 Oil Content Monitor |
| 2.10 |
| S9596-CD-MMO-010, Technical Manual, Oil Content Monitor (ET-35N) |
| 2.11 |
| Instructional Manual 6F8A0883: Electromagnetic Flowmeter Detector, Toshiba Model GF630/GF632 |
| 561 |
| 2.1.1 |
| Steel Structures Painting Council, Good Painting Practice, Volume 1, Fourth Edition |
| 2.1.2 |
| Steel Structures Painting Council, System and Specifications, Volume 2, Eight Edition |
| 2.1.3 |
| SSPC SP11, Power Cleaning to Bare Metal |
| 565 |
| 2.1.1 |
| MSFSC SWIRRR 028, “Fire Fighting System Inspection and Testing” |
| 2.1.2 |
| MSC Dwg. No. 801-8193674; SRD: Fire Control Plan |
| 2.1.3 |
| MSC Dwg. No. 555-8498845; FM-200 Fire Extinguishing System Diagram |
| 2.1.4 |
| Technical Manual T9555-CJ-MMC-010; FM 200 Fire Extinguishing System, Model FM-200 |
| 567 |
| 2.1 |
| MSFSC SWIRRR 022, “MISCELLANEOUS VALVE REPAIR” |
| 2.1.1 |
| MSC Dwg. No. 801-8194507; SRD: Fire Control Plan |
| 2.1.2 |
| Resolution A.951(23), Adopted on 5 December 2004, Improved Guidelines for Marine Portable Extinguishers |
| 2.1.3 |
| National Fire Protection Association, NFPA 10, Standard for Portable Fire Extinguishers; 2013 Edition |
| 571 |
| 2.1.1 |
| MSC Dwg. No. 801-8194507; SRD: Fire Control Plan |
| 572 |
| 2.1 |
| Technical Manual T9555-CM-MMC-010; Fire Suppression System, MDL WHDR-600, Range Guard |
| 574 |
| 2.1.1 |
| MSC Dwg. No. 801-8194507; Fire Control Plan |
| 2.1.2 |
| NAVSEA Manual T9167-BP-MMC-010, Hydraulic Sliding Watertight Doors |
| 2.1.3 |
| NAVSEA Manual T9167-BC-MMC-010, Rolling Steel Doors |
| 575 |
| 2.1 |
| Tech Manual T9555-CQ-MMC-010; Fire Extinguishing System, Crossflow Water Mist, Installation, Operation, and Maintenance Manual, Novenco A/S |
| 602 |
| 2.1 |
| Fassmer Dwg 12.1544-203.00.00C Accommodation Ladder 13.16 X 0.75M with Auto Turning Over Device |
| 2.2 |
| IMO MSC.1/Circ. 1331 dtd 11 June 2009, Guidelines for construction, Installation, Maintenance and Inspection/Survey of Means of Embarkation and Disembarkation |
| 603 |
| 2.1 |
| TS800-AE-MMC-010 Life Boat With Winch And Davit Installation, Operation And Maintenance Manual |
| 2.2 |
| MSFSC SWIRR 001, Lifeboat, Rescue Boats and Davit Maintenance Requirements |
| 2.3 |
| SOLAS Chap III, Life-Saving Appliances and Arrangements |
| 2.4 |
| IMO MSC.1/Circ. 1206, Annex 1, Guidelines for Periodic Servicing and Maintenance of Lifeboats, Launching Appliances and On-Load Release Gear |
| 604 |
| 2.1 |
| T9583-A8-MMC-010 Boat, Rescue with Davit and Winches, Operation And Maintenance Manual |
| 2.2 |
| MSFSC SWIRR 001, Lifeboat, Rescue Boats and Davit Maintenance Requirements |
| 2.3 |
| SOLAS Chap III, Life-Saving Appliances and Arrangements |
| 2.4 |
| IMO MSC.1/Circ. 1206, Annex 1, Guidelines for Periodic Servicing and Maintenance of Lifeboats, Launching Appliances and On-Load Release Gear |
| 605 |
| 2.1 |
| 46 CFR 160.151-35, Servicing, Inflatable Liferafts (SOLAS) |
| 2.2 |
| 46 CFR 160.151-57, Servicing Procedures, Inflatable Liferafts (SOLAS) |
| 2.3 |
| MSC Drawing 802-748866, Selected Record Drawing General Arrangement |
| 2.4 |
| MSFSC Standard Work Item for Repetitive Repair Requirements Item No. 2, “Inspection and Repair of Inflatable Liferafts |
| 606 |
| 2.1 |
| Naval Ships’ Technical Manual (NSTM) Chapter 634 (“Deck Coverings” |
| 2.2 |
| Naval Air Warfare Center, Visual Landing Aids Installation TAK(E) Class Ships – 627928 |
| 2.3 |
| Surface Preparation Standard No. 10 (SSPC-SP-10) of the steel structures painting council manual |
| 2.4 |
| Surface Preparation Standard SSPC-SP11, Power Tool Cleaning To Bare Metal |
| 2.5 |
| Air Capable Ship Aviation Facilities Bulletin No. 1K |
| 2.6 |
| Surface Preparation Standard, SSPC-SP-12/NACE 5, Surface Preparation and Cleaning of Metals by Water jetting Prior to Recoating |
| 2.7 |
| NAVSEA Dwg 588-7488997 (H), Aviation Support Facilities |
| 622 |
| 2.1.1 |
| NAVSEA Drawing No. 528- 8498865 Rev. -; SRD Vacuum Sewage & Plumbing Drains System Diagram |
| 623 |
| 2.1 |
| Technical Manual TS800-AE-MMC-020, Life Boat Diesel Engine, SABB Type L3.139 LB(Copy Required) |
| 2.2 |
| IMO MSC.1/Circ.1206, Measures to Prevent Accidents with Life Boats |
| 2.3 |
| Technical Manual T9583-A8-MMC-020, Rescue Boat Diesel Engine, Steyr Type 236 |
| 624 |
| 2.1 |
| MSC DWG 802-8498924, General Arrangement |
| 2.2 |
| S9086-VG-STM-010, Chapter 643, Deck Coverings, General |
| 629 |
| 2.1.1 |
| ANSI/NAAMM Standard (Metal Bar Grating) MBG 532-09 |
| 2.1.2 |
| Drawing No. 803-7081122, GTR (General Technical Requirements) |
| 2.1.3 |
| MSC DWG 802-8498924, General Arrangement |
| 630 |
| 2.1 |
| T9593-DC-MMC-010; Marine Sanitation Device and Vacuum Collection, Holding and Transfer Systems |
| 2.2 |
| Military Sealift Fleet Support Command (MSFSC) Standard Work Item for Repetitive Repair Requirements; Item No. 10 dated 22 March 2010; Tank, Void and Cofferdam Preservation |
| 631 |
| 2.1.1 |
| MSC 551-8387020, Vent Sounding and Overflow System Diagram |
| 632 |
| 2.1 |
| NAVSEA Drawing 612-7489180; “Flight Deck Safety Nets Arrangement & Detail" |
| 2.2 |
| NAVSEA Drawing 804-8436624 - Safety Nets, Deck Edge CRES 316, Frame, CRES 316 Net" |
| 633 |
| 2.1.1 |
| Military Sealift Fleet Support Command (MSFSC) Standard Work Items Item No. 5 “DECK COVERINGS” dated 21 July 2009 |
| 801 |
| 2.1 |
| MSC SWIRR 004, Ventilation System Cleaning Requirements |
| 2.2 |
| NAVSEA Drawing 512-7488750, Rev J; HVAC Diagram Accommodation Spaces (Sheets 1, 17, and 22 only) |
| 821 |
| 2.1 |
| NAVSEA Drawing No. 516-7488756 Rev F, Cargo Refrigeration Secondary Coolant Circulation System Diagram |
| 2.2 |
| Military Sealift Standard Work Item #31, Motor driven Pump Overhauls |
| 2.3 |
| TM T9516-BN-MMC-01A, Brine System Installation and Maintenance Manual |
| 825 |
| 2.1 |
| TM T9512-BN-MMC-010, Heating Ventilation &Air Conditioning (HVAC) Volume 1 |
| 2.2 |
| TM T9512-BN-MMC-020, Heating Ventilation &Air Conditioning (HVAC) Volume 2 |
| 826 |
| 2.1.1 |
| T/M T9516-BB-MMC-010 HVAC/Cargo Refrigeration Operation and Maintenance |
| 2.1.2 |
| T/M T9516-A8-MMC-01C Refrigeration Plant, Cargo for USNS AKE 1 Class |
| 2.1.3 |
| T/M T9516-BF-MMC-010 Cargo Refrigeration Pump Out Unit R134a |
| 2.1.4 |
| T/M T9516-BG-MMC-010 AC System Pump Out Unit 404a |
| 2.1.5 |
| T/M T9516-BN-MMC-01A Cargo Brine System |
| 2.1.6 |
| T/M T9512-BN-MMC-010 to 060 HVAC Systems |
| 2.1.7 |
| T-AKE Cargo Refrigeration and Air Conditioning System Shipboard Automated Maintenance Module (SAMM) Maintenance Actions |
| 853 |
| 2.1.1 |
| MSCFSC SWIRR 004, “Ventilation System Cleaning Requirements” |
| 2.1.2 |
| TM T9512-BN-MMC-010, Heating Ventilation & Air Conditioning (HVAC) Volume 1 |
| 2.1.3 |
| TM T9512-BN-MMC-020, Heating Ventilation & Air Conditioning (HVAC) Volume 2 |
| 901 |
| 2.1 |
| MSC DWG 801-8194513 Rev A, Trim & Stability Booklet |
| 2.2 |
| MSC DWG 801-8498914 Rev -, Docking Plan |
| 2.3 |
| NAVSEA DWG 830-8194501 Rev -, Capacity Plan |
| 2.4 |
| Safety Certification Program for Dry-docking Facilities and Shipbuilding Ways for U.S. Navy Ships, MIL-STD 1625C(SH) |
| 2.5 |
| COMSC Instruction 9997.1A, Dry dock Standards for MSC Ship Availabilities |
| 2.6 |
| Docking Report, Forms NAVSEA 9997/1,2,3 and 4 |
| 903 |
| 2.1.1 |
| WARTSILA DWG H79352-01 Rev C, GA of 744 Type A8 Seal |
| 2.1.2 |
| NAVSEA Dwg 243-7488962 Rev F, Shaft Arrangement |
| 2.1.3 |
| T/M T9243-AZ-MMC-010 Fixed Pitch Propeller and Shafting with Bearings Model W084836780 |
| 2.1.4 |
| T/M T9561-BR-MMC-010 Steering Gear Rotary Vane, Model # RV 2150-3, and Shorthorn Rudder |
| 2.1.5 |
| Wartsila Dwg W084837233 Rev E, Assy Stern Tube |
| 2.1.6 |
| Bot Groningen Dwg 1.1262/1/1 A1, Rudder Project Arrangement |
| 2.1.7 |
| Bot Groningen Dwg 3.1265/1.1 A3, Rudder Trunk Summary |
| 2.1.8 |
| Bot Groningen Dwg 2.1263/1.1 A3, Rudder Cone Coupling |
| 2.1.9 |
| Bot Groningen Dwg 2.1264/1.1 A3, Rudder Hydraulic Nut Summary |
| 2.1.10 |
| Wartsila Dwg WLP001616-001, Assembly Propeller Cap |
| 2.1.11 |
| Wartsila Dwg W084836779, Propeller Boss |
| 2.1.12 |
| Wartsila Dwg W084838596, Assy Propeller Hydraulic Nut |
| 2.1.13 |
| NASSCO Dwg 471-351-4984, Rope Guard Installation |
| 2.1.14 |
| Wartsila Dwg W084837232, Arrangement Shafting |
| 2.1.15 |
| Wartsila Dwg W007420313, Round Nut Locking |
| 2.1.16 |
| Wartsila Dwg 9AK30410AS3, Shaft Flange-9FC6-58 AS3 |
| 2.1.17 |
| T-AKE 1 Class Propeller Shafting – Static Bearing Reaction |
| 2.1.18 |
| TECHNICAL MANUAL FOR 744 TYPE A8 SEAL, TM-A8-T-AKE |
| 904 |
| 2.1 |
| T/M T9243-AX-MMC-010, SHAFT SEAL, STERN TUBE, TYPE MD FOR USNS LEWIS AND CLARK (T-AKE 1) CLASS, INSTALLATION, OPERATION AND MAINTENANCE INSTRUCTIONS |
| 2.2 |
| WARTSILA LIPS Drawing H74985-01 Rev(C), GA of 750 MOD 712 Type MD Seal, provided in Reference 2.1 |
| 2.3 |
| TECHNICAL MANUAL FOR 744 TYPE A8 SEAL, TM-A8-T-AKE |
| 2.4 |
| WARTSILA DWG H79352-01 REV C, GA of 744 Type A8 SEAL |
| 905 |
| 2.1.1 |
| T/M T9568-A2-MMC-010 CHG-A, Bow Thruster Installation Manual TYPE TT2200 |
| 909 |
| 2.1.1 |
| Surface Preparation Specifications, Steel Structures Painting Council Volume 2 |
| 2.1.2 |
| MSC Paint Handbook |
| 2.1.3 |
| NAVSEA DWG. 631-7488891 Rev J, Paint Schedule |
| 2.1.4 |
| NAVSEA DWG. 581-7489016 Rev E, Anchor Handling Arrangement and Details |
| 910 |
| 2.1 |
| MSC Drawing 801-848912; Docking Plan |
| 2.2 |
| T/M T6435-CN-MMC-010; T-AKE Motor Operated Valves with Actuators |
| 911 |
| 2.1 |
| T/M T9633-AS-MMC-010, Cathodic Protection System Impressed Current |
| 912 |
| 2.1 |
| Technical Manual S9243-BY-MMA-010/3AB25; Maintenance Manual for 200 Amp Electronic Grounding Unit |
| 2.2 |
| MSC Dwg. No. 320-8391519 Rev -; T-AKE Shaft Ground Modification Electrical |
| 913 |
| 2.1 |
| MSC Drawing No. 256-7488723; Central Seawater Cooling System Diagram |
| 2.2 |
| MSC Drawing No. 256-7488735; Auxiliary Seawater System Diagram |
| 2.3 |
| MSC Drawing No. 521- 8498920; Fire-main System Diagram |
| 2.4 |
| MSC Drawing No. 529-7488731; Ballast System Diagram |
| 2.5 |
| MSC Drawing No. 531- 7488738; Distilling Plant System Diagram |
| 2.6 |
| NASSCO Drawing No. 73-87-441; Waster Piece, Class 150, 4 NPS and Above |
| 2.7 |
| Drawing No. 256-8390559; Central Seawater Waster Piece Assembly |
| 914 |
| 2.1 |
| NAVSEA DWG 100-7489133, Bilge Keel & Hold Double Bottoms (BK Zone) |
| 918 |
| 2.1 |
| NAVSEA Dwg. 603-7488868, Paint Lines and Draft Marks |
| 2.2 |
| Steel Structures Painting Council, Good Painting Practice, Volume 1, Fourth Edition. |
| 2.3 |
| PPG-PMC MSC Handbook |
| 932 |
| 2.1 |
| T/M T6435-CN-MMC-010; T-AKE Motor Operated Valves with Actuators |
| 954 |
| 2.1 |
| Military Sealift Fleet Support Command (MSFSC) Standard Work Items Item No. 23 “RUDDER, STERN FRAME AND BILGE KEEL EXAM” dated 18 September 2009 |
| 966/967/968 |
| 2.1.1 |
| NAVSEA Drawing No. 243-7488962 Revision G, Shaft Arrangement |
| 2.1.2 |
| NAVSEA Tech Manual, S9086-HM-STM-010, NSTM Chapter 243 Propulsion Shafting |
| 2.1.3 |
| NAVSEA Tech Manual S6420-AC-HBK-010, Handbook, Bearings, Measurement of Load |
| 2.1.4 |
| ABS Guidance Notes on Propulsion Shafting Alignment, FEB 2014 |
| 1001 |
| 2.1 |
| NAVSEA Tech Manual S9570-AC-MMA-020, Navy Standard Sliding Block with Slip Clutch (Aboard Ship) |
| 2.2 |
| NAVSEA Dwg. No. 5363392, (Rev. D) Chain Double Strand |
| 2.3 |
| NAVSEA Dwg. No. 5363358, (Rev. F) Sliding Block Assembly |
| 2.4 |
| NAVSEA Dwg. No. 5363431, (Rev. M) Transfer Head Assembly |
| 2.5 |
| NAVSEA Dwg. No. 5363361, (Rev. J) Sliding Block Drive Assembly and Installation Details |
| 2.6 |
| NAVSEA Dwg. No. 5210545, Standard Painting Procedures for UNREP Equipment |
| 2.7 |
| IMECO Dwg. No. 22024-570-0100-6 Rev C (Sheet 6), Solid Cargo Delivery Kingpost No. 6 Outfitting Details |
| 1021 |
| 2.1 |
| NAVSEA Tech Manual S9571-A9-MMA-010, Navy Standard Ram Tensioner |
| 2.2 |
| NAVSEA DWG. No. 5210545, Standard Painting Procedures for UNREP Equipment |
| 1022 |
| 2.1 |
| NAVSEA DWG. 570-7489006, Single Probe Delivery |
| 2.2 |
| NAVSEA DWG. 570-7489007, Double Probe Delivery |
| 2.3 |
| NAVSEA DWG. 5210545, Standard Painting Procedures for UNREP Equipment |
| 1023 |
| 2.1 |
| NAVSEA Tech Manual S9570-AC-MMA-020, Navy Standard Sliding Block with Slip Clutch (Aboard Ship) |
| 2.2 |
| NAVSEA DWG. No. 5363392, (Rev. D) Chain Double Strand |
| 2.3 |
| NAVSEA DWG. No. 5363358, (Rev. F) Sliding Block Assembly |
| 2.4 |
| NAVSEA DWG. No. 5363431, (Rev. L) Transfer Head Assembly |
| 2.5 |
| NAVSEA DWG. No. 5210545, Standard Painting Procedures for UNREP Equipment |
| 2.6 |
| NAVSEA DWG. No. SK-08-18-14, Bumper, Transfer Head |
| 1026 |
| 2.1 |
| Air Capable Ship Aviation Facilities Bulletin No. 1K |
| 2.2 |
| NAVAL AIR ENGINEERING CENTER, Certification Test Procedure for Shipboard Wind Measuring System, NACE-91-8050 |
| 2.3 |
| Technical Manual BELFORT AEROVANE MS0113-ET5-1669C |
PAGE
File details come from the government source that posted it. Updated .