CLASS_JA_FMSNA_N104-T-EPF_(FY19)_Redacted.pdf

Control Number N104-T-EPF FMSNA

CLASS JUSTIFICATION APPRQVAL (J&A) FOR OTHER THAN FULL AND

OPEN COMPETITION

1. Contracting Activity. Department of the Navy, Military Sealift Command .

2. Description of Action Being Approved. Award of contracts on a sole source basis for Fincantieri Marine Systems — North America (FMSNA) , the Original Equipment Manufacturer (OEM) , for Isot ta Fraschini Ships Service Diesel Generators (SSDG) , model V1312C2ME-HPCR as sole source contracts for T-EPF Class Vessels .

The authority to act under this class justification and approval (J&A) expires on September 30, 2019 .

3 . Description of Supplies/ Services. MSC requires parts and services to support OEM recommended maintenance and repairs to the SSDGs installed aboard T-EPF vessels. The actions executed under this class have an estimated value of approximately $7 , 000, 000 .

00 using FY 19 Operation and Maintenance funds .

4 . Statutory Authority Permitting Other Than Full and Open Competition. The statutory authority permitting other than fulland-open competition is 10 U.S. C. 2304 (c) (1) , as implemented by FAR 6.302-1 (a) (2) , whereby parts and service are considered to be only available from only one responsible source .

5 . Rationale Supporting Use of Authority Cited Above. The Expeditionary Fast Transport (EPF) Class ship is built with four each Isotta Fraschini Model V1312C2ME-HPCR ships service diesel generators. All control system, alternator, control system, electrical, fuel and exhaust interface, hardware and structural support for the system is built specifically for the Isotta Fraschini Model V1312C2ME-HPCR SSDG. If any other S SDG parts were procured, it would result in a multi -year re-design of the structural elements of the E PF . The hardware and structural design would need to be completely re-conf igured at an unacceptable cost. It is mission-critical and personnel safety- critical to maintain class configuration and interchangeability across the ship class. Any deviation from the OEM parts and maintenance could result in personal injury, loss of life, or equipment failure and damage to the installed SSDGs. Use Of the Isotta Fraschini SSDG components and servicing will provide fit form and function of the S SDG . The use of Isotta Fraschini service and parts across the class and will ensure required reliability and effectiveness of the S SDGs as required by ABS, Safety of Life at Sea SOLAS) and MSC COMISNT 4490 . 1B regulation.

The manufacturer's business practice is to provide the S SDG parts and servicing directly to installing shipyards , ship owners and operators in the United States directly, without going through third-party vendors from its company headquarters and manufacturing facility in Bari , Italy through the distributor in Chesapeake , VA.

MSC does not have manufacturing and technical information required to evaluate and determine whether non-OEM components , replacement parts and service offered are equivalent to the OEM components and replacement parts . This is proprietary information and the Government did not acquire rights in this data . OEM representatives have access to provide parts and technical data drawings from the original manufacturer, as required to properly repair and maintain the equipment. All OEM repair parts and service are in compliance with USCG and ABS IMO regulatory requirements .

6 . Description of Efforts Made to Solicit Offers from as Manx Potential Sources as Practical. In accordance with Procedures, Guidance and Information 206 . 302-1, the Government issued a Sources Sought on the Federal Business Opportunities (FedBizOpps) website seeking eligible businesses that could provide FMNSA SSDG parts and services on '7 September 2018. There were no responses to the Sources Sought postings other than FMSNA. FMSNA is a large business under NAICS code 811310 and has no Active Exclusions on WWW . SAM . GOV as 27 February 2019. The Government intends to synopsize when required and to post Requests for Quotations (RFQs) and Requests for Proposals (RPFs) on FedBizopps for each separate procurement with the intent awarding a firmfixed-priced contract .

7 - Determination of Fair and Reasonable Price. The Contracting

Officer will determine that the price for supplies/ services is fair and reasonable pursuant to FAR 13 . 106-3 or 15 .404-1, as appropriate.

8 . Actions to Remove Barriers to Future Competition.

For the reasons set forth in Paragraph 5, OEM parts and services are required for the T-EPF class SSDGs. MSC has no plans at this time to compete future contracts for the types of supplies covered by this document. If another potential source emerges, MSC will assess whether competition for future requirements is feasible. Should MSC determine that OEM parts and services are no longer required, this class J&Ä will become null and void.