N32205-15-R-4000_Att_1.docx

N32205-15-R-4000 Fall River Attachment 1

0011 Furnish General Services – Edited work item to include temporary cooling for the ships electronics spaces. Avail is during the summer months.

0102 Install Hull Level Catwalk/Gratings (TALT-6) – Included updated reference which includes installing catwalk in forepeak.

0103 Install Navigation Running Light Access (TALT-28) - Update work item and reference.

- Plate increased to 10mm per ABS comments

- Routing of existing cabling clarified

- Added stuffing tube requirements

- Modification of lower shell stringer to clear door install

- Door construction changes to reflect as-built condition on SPD/CTC

- Exhaust ducting transition piece redesign

0104 Modify Vent Containment Access (TALT-36) - Update work item and reference

- Allows bolted vice welded attachment of hand scuttles

- Chalk test requirement removed

- Key tether requirement added

- Clarified panel stiffening requirements in modified CBG paneling

- Clarified position of CBG door to vent containment opening

0107 Structural Inspections - Modified work item to include the installation of removable insulation blankets in way of reinstalling existing type of insulation

0109 Install Cargo Handling Bits and Cleats - Modified work item and references to include 3 additional bit installations on the transom and at the pilot ladder station. This is an update to the Transalt.

0201 MTU Crankshaft Inspection – Deleted work item. No longer requires this inspection due to updated equipment.

0301 Modify Mission Bay Lighting (TALT-14) - Modified work item to install LED lights vice fluorescent for energy savings.

0501 Perform Annual Stern Ramp Maintenance - Modified work item to include replacement of leak-prone tubing beneath the stern ramp and the painting of steel surfaces of ramp system.

0505 Modify PW Piping for Cargo Potable - Added new transalt work item. This item installs potable water connections to allow use of a cargo potable water tank.

0506 A/C Heat Exchange Condenser Cleaning and HVAC Maint - Modified work item to include the installation of low point valves.

0507 Install Fuel Oil Sensors in Diesel Fuel System - Updated with new transalt statement of work and drawings.

0508 Install Mission Bay Centerline Potable and CHT Connections – Added new transalt work item. This item installs CHT and potable water connections at the centerline of the mission bay to allow for the connection of a mission required toilet and shower unit.

0602 Install Vidmar Storage Cabinets – New work item to install new storage capabilities throughout the vessel.

0609 Install Mogas Container Racks - Update work item reference with lessons learned from previous hulls.

0905 Hull Markings to Support UWILD Cert (TALT-2) – Updated with new transalt statement of work and drawings.