SOW.doc

Statement of Work APN7-16 Requirement BS-650013.APN7METCAL91- Low Frequency AC/DC A. Background The use of NAVAIR METCAL equipment funding is to procure Calibration Standards (CALSTDs) and ancillary equipment for Aviation Fleet Intermediate Calibration Activities, Fleet Training Activities and Aviation Navy Calibration Laboratories (NCLs) to support Aviation Organizational and Intermediate (I) level maintenance assets. All Cal Standards listed for procurement must first go through an approval process. This process includes: initial submission by the fleet; review and prioritization by the Fleet TYCOM’s; laboratory workload justification and standardization review by a NAVAIR METCAL technical review team; overall procurement strategy review to assess overall program objectives, priorities and funding.

REQUIREMENTS:

1. Mfr. one year warranty with sticker affixed to each unit plus a warranty certificate.

2. Calibration Certificate and calibration sticker (as applicable for each unit)

3. Manufacturer’s Standard Operating and servicing manuals (CD version acceptable) shall be provided with each unit. The DFARS clause listed below must be referenced in all contracts and the manufacturer made aware that the use/reproduction of tech data/manuals (for government use only) will follow these use guidelines.

DFARS SUBPART 227.71 - Rights in Technical Data

4. The US government shall have limited technical data rights for all technical manuals and documents furnished with the procured commercial items, for the purpose of Government use only in duplicating or posting technical documentation to limited access web sites for use by US Government Personnel and Contractors engaged in maintenance, calibration or related logistics activities associated with the procured commercial items in accordance with DFARS 252.227-7015 Technical Data--Commercial Items.

B. Tasking:

The contractor shall provide the following equipment:

1) P/N SR1-0.01 Standard resistor Qty 1

2) P/N SR1010-100 Resistance transfer standard Qty 5

To include the following:

a) Calibration conditions: 23°C, low power, four terminal measurement

b) Temperature coefficient: ±5 ppm/ºC matched within 3 ppm/ºC

For 100 Ω and higher

±1 ppm/ºC for 10 Ω

±15 ppm/ºC matched within 5ppm/ºC

For 1 Ω

c) Power Coefficient: ±0.1 ppm/mW per resistor for 100 Ω and higher

±0.02 ppm/mW per resistor for 10 Ω

±0.3 ppm/mW per resistor for 1 Ω

d) Standard Values: 1, 10, 100 Ω/step; 1, 10, 100 k Ω/step

e) Maximum Power Rating: 1Ω/step or 5 W distributed over 10 resistors

f) Breakdown Voltage: 1500 V peak to case

g) Leakage Resistance: Greater than 1012 Ω from terminal to case

h) Calibration Data: Initial calibration readings affixed to instrument

i) Manual P/N 8502

j) Z540 compliant calibration for SR1010 with certificate & data P/N OPT-Z540

3) P/N R3-1,1100M Decade resistor Qty 30 C. Deliverables Delivery of the equipment shall be provided at the following address:

COMMANDER

NAVAIR Calibration Standards

MCAS, Attn: Lou Cerrillo

(UIC N48535)BLDG 612, Bay 9

Beaufort, SC 29904-5002 D. Delivery Date

Delivery for P/N SR1-0.01 shall be no later than 45 days after award of contract, and shall be absolutely no later than June 15, 2016.

Delivery for P/N SR1010-100 shall be no later than 100 days after award of contract, and shall be absolutely no later than August 15, 2016.

Delivery for P/N R3-1,110M shall be no later than 180 days after award of contract, and shall be absolutely no later than October 15, 2016 E. Invoicing All invoicing shall be submitting into Wide Area Workflow for payment after ALL material is received in the condition as stated in section B.

VENDOR – IF ELECTRONIC EQUIPMENT, PLEASE MARK BOX/PACKAGE CONTAINING ELECTRONIC EQUIPMENT WITH THE “DO NOT SCAN” STICKER