N00253-15-R-0009-0003.pdf

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. NAME AND TITLE OF SIGNER (Type or print)

30-105-04EXCEPTION TO SF 30

APPROVED BY OIRM 11-84

STANDARD FORM 30 (Rev. 10-83) Prescribed by GSA

FAR (48 CFR) 53.243

The purpose of this amendment is to make corrections to the Statement of Work.

1. CONTRACT ID CODE PAGE OF PAGES

J 1 4

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

16C. DATE SIGNED

BY 09-Jun-2015

16B. UNITED STATES OF AMERICA15C. DATE SIGNED15B. CONTRACTOR/OFFEROR

(Signature of Contracting Officer)(Signature of person authorized to sign)

8. NAME AND ADDRESS OF CONTRACTOR (No., Street, County, State and Zip Code) X N00253-15-R-0009

X 9B. DATED (SEE ITEM 11)

12-May-2015

10B. DATED (SEE ITEM 13)

9A. AMENDMENT OF SOLICITATION NO.

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

X The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offer is extended, X is not extended.

Offer must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended by one of the following methods:

(a) By completing Items 8 and 15, and returning 1 copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN

REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. ACCOUNTING AND APPROPRIATION DATA (If required)

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE

CONTRACT ORDER NO. IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation date, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(B).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

E. IMPORTANT: Contractor is not, is required to sign this document and return copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

10A. MOD. OF CONTRACT/ORDER NO.

2. AMENDMENT/MODIFICATION NO. 5. PROJECT NO.(If applicable)

6. ISSUED BY

3. EFFECTIVE DATE

09-Jun-2015

CODE

NAVAL UNDERSEA WARFARE CENTER

ATTN JAMIE YOURKOSKI

JAMIE.YOURKOSKI@NAVY.MIL

610 DOWELL ST, BLDG 206

KEYPORT WA 98345-7610

N00253 7. ADMINISTERED BY (If other than item 6)

4. REQUISITION/PURCHASE REQ. NO.

CODE

See Item 6

FACILITY CODECODE

EMAIL:TEL:

N00253-15-R-0009

SECTION SF 30 BLOCK 14 CONTINUATION PAGE

SUMMARY OF CHANGES

SECTION C - DESCRIPTIONS AND SPECIFICATIONS

The following have been modified:

STATEMENT OF WORK

Statement of Work Assembly, Hull (FES Shell w/ Brackets)

NSN: 2040-01-398-9809

PN: 5855690-503

The following additional clarifications pertain:

‐ WS22351 Para 3.3.7 touch-up repair and Para 3.3.7.2 material use Drawing 6146924 as required in lieu of Dwg: 5759545

‐ WS22351 Para 4.1.2 states painting facility must be certified by NUWC Division Newport, current qualified sources are listed in Table XII of WS22351

‐ DWG. 5585237-SUPP (Appendix II) Confidential will be provided IAW DD254 clearance process upon request

‐ Approved materials and sources of supply for low temperature protective coating are listed by applicable dash number in the table provided on Dwg. 6146923, Rev.H

‐ No substitution of material allowed without prior consent of HWT ISE (NUWC Div. Newport)

‐ Once the award is made, a post award kick off/conference may be scheduled to discuss risk areas and provide any clarifications required with the vendor and subcontractors

‐ Once the Award is made, the vendor will need to contact the technical point of contact (POC) to obtain serial numbers IAW Dwg: 5855688-501, Note: 11 found on page 3.

‐ Vendor to provide certificate of conformance to all drawing notes and specifications

‐ Shells must be externally wrapped in cushioning material to ensure no damage to painted surface. Box, crate, and/or cradle shells to ensure no movement during commercial transportation to ensure no damage

‐ Mark label with manufacturer, nomenclature, NSN, part number, cage code, and date of manufacturer.

‐ Partial and/or early deliveries are acceptable.

‐ Prior to shipment vendor is to notify Technical POC with tracking number for FAT and all production units

‐ Please see Attachment 3 in Section J for the OPSEC Guide for Defense Contractors.

PARTSLIST FOR 5855690-503

Manufacture IAW: 5855690-503, Rev: D and the following associated drawings:

5855690-503 Rev D PL5855690-503 Rev D

Additional Dwgs:

5856077-05 Rev A 5856079-01 Rev DD 6813109 Rev B 5856121-01 No Rev 5856125 No Rev 5856124-01 No Rev 5856069 No Rev

5855688-501 Rev P WS22351 Rev F WS26947 No Rev 6813116 Rev A 6813121 Rev A 6657378 Rev A 6146924 Rev B (for touch up paint process ref. WS22351) 5584929 Rev E 5585237 Rev F (testing) 5585237-SUPP (Appendix II) (Confidential) 5729035 Rev C1 5584933 Rev D PL5855688-501 Rev P 5855689 Rev D 6146923-2 Rev H 5855691-501 Rev F 5855692 Rev D (Note: 5855692-3 & 5855392-5 denotes angle differences) PL5855692 Rev D (Note: 5855692-3 denotes angle differences – on Dwg: 5855692) 5855692-501 Rev D PL5855692-501 Rev D (Note: 5855692-5 denotes angle differences – on Dwg: 5855692) 5855693 Rev B 5855706 Rev D 5855815 Rev B PL5855815 Rev A 5855867 Rev C 5855867-501 Rev C 5855880 Rev C 5855880-501 Rev C 6510315 Rev D 5855894 Rev C 5855894-505 Rev C 5855894-507 Rev C 5855896 Rev A 7053037 No Rev 5855973 Rev A 5855986 Rev B 6700021-1 Rev A PL6700021-1 Rev A 6700021-2 Rev A PL6700021-2 Rev A 5856015-501 Rev E PL5856015 Rev E 5856015-3 Rev 5856015-5 Rev 5946745 No Rev

5856018 Rev B 5856018-501 Rev B 5856018-503 Rev B 5856019 Rev A 5856040 Rev B 5856068 Rev B PL5856068 Rev B 5856017 Rev F 6879857 Rev B 5946746 Rev A 5946747-501 Rev B 5946748 No Rev 5946767 Rev B PL5946767 Rev B 5946767-3 Rev B 2505685 Rev P 6813062 No Rev 2507294-48 Rev BA (Rev. Updated 12/18/14 via NOR – 48/NUE14023-2) 2507294-49 Rev BA (Rev. Updated 12/18/14 via NOR – 48/NUE14023-2) 2507294-50 Rev BA (Rev. Updated 12/18/14 via NOR – 48/NUE14023-2) 8243413 Rev C INCL. NOR: 48/NUE15011-1 3249505 Rev D 5946744-5-2 No Rev 5946744-5-3 No Rev 5946744-5-4 No Rev 5946744-5-5 No Rev 5946744-5-7 No Rev 7054085 Rev B 5205453 Rev L 6300843 No Rev 7054083 Rev B 7608951 No Rev

(End of Summary of Changes)