17RJN53_0001.pdf

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. NAME AND TITLE OF SIGNER (Type or print)

30-105-04EXCEPTION TO SF 30

APPROVED BY OIRM 11-84

STANDARD FORM 30 (Rev. 10-83) Prescribed by GSA

FAR (48 CFR) 53.243

This amendment is issued to extend the closing date of this solicitation to 15 JUNE 2017, and revise clause 52.212-1 ADDENDUM to remove the last bullet point under (b)(1) and to include number of copies the offeror must submit of the technical proposal.

1. CONTRACT ID CODE PAGE OF PAGES

J 1 8

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

16C. DATE SIGNED

BY 12-May-2017

16B. UNITED STATES OF AMERICA15C. DATE SIGNED15B. CONTRACTOR/OFFEROR

(Signature of Contracting Officer)(Signature of person authorized to sign)

8. NAME AND ADDRESS OF CONTRACTOR (No., Street, County, State and Zip Code) X N0016417RJN53

X 9B. DATED (SEE ITEM 11)

02-May-2017

10B. DATED (SEE ITEM 13)

9A. AMENDMENT OF SOLICITATION NO.

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

X The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offer X is extended, is not extended.

Offer must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended by one of the following methods:

(a) By completing Items 8 and 15, and returning copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN

REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. ACCOUNTING AND APPROPRIATION DATA (If required)

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE

CONTRACT ORDER NO. IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation date, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(B).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

E. IMPORTANT: Contractor is not, is required to sign this document and return copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

10A. MOD. OF CONTRACT/ORDER NO.

2. AMENDMENT/MODIFICATION NO. 5. PROJECT NO.(If applicable)

6. ISSUED BY

3. EFFECTIVE DATE

11-May-2017

CODE

NAVAL SURFACE WARFARE CENTER CRANE DIV

E. JOHNSON (812-854-8653)

BLDG 3373

300 HWY 361

CRANE IN 47522-5001

N00164 7. ADMINISTERED BY (If other than item 6)

4. REQUISITION/PURCHASE REQ. NO.

CODE

See Item 6

FACILITY CODECODE

EMAIL:TEL:

N0016417RJN53

SECTION SF 30 BLOCK 14 CONTINUATION PAGE

SECTION 4.0 - CLAUSES & OTHER FULL TEXT INFORMATION

SUMMARY OF CHANGES

SECTION 1.0 - SCHEDULE/INSPECTION & ACCEPTANCE/DELIVERY

The required response date/time has changed from 05-Jun-2017 03:00 PM to 15-Jun-2017 03:00 PM.

SECTION 5.0 - INSTRUCTIONS & PROVISIONS

The following have been modified:

52.212-1 ADDENDUM

PROPOSAL REQUIREMENTS

A copy of the offeror's warranty shall be submitted with the initial offer.

WORLD WIDE WEB SOLICITATION INFORMATION

Some solicitations available posted on the WWW site may not include all documents of the solicitation package.

Drawings and Contract Data Requirement Lists (CDRLs) are examples of documents that may not be included due to technical issues. Under those circumstances, a notice will be provided with each solicitation package listing documents not available on WWW. Hard copies of the documents may be obtained by contacting the solicitation Point of Contact (POC) listed in the solicitation document.

Any amendments to the subject solicitation will be posted to the FedBizOpps http://www.fbo.gov . The complete solicitation package, including all amendments, should be received and reviewed prior to submitting a response. It is the responsibility of the offeror to obtain all amendments and/or other applicable documents prior to submission of the offer. Under these circumstances, offerors are reminded to include acknowledgement of acceptance of these amendments in their offer.

ELECTRONIC SUBMISSIONS OF OFFERS, TO INCLUDE NECO, E-MAIL AND FAX, IN RESPONSE

TO THIS SOLICITATION ARE NOT ACCEPTABLE.

(a) General

This provision specifies the organization, format and content of an offeror's technical and price proposals to be submitted in response to this solicitation for evaluation by the Government. The purpose of the instructions contained in this provision is to provide for uniform submission of all offerors' proposals. Uniformity is expected to facilitate Government efficiency and accuracy in the technical and price evaluation and source selection process.

The contents of the offeror's proposal shall be organized to conform to the requirements specified herein.

The proposal material submitted by offerors shall define the offeror's technical approach that would satisfy the requirements of the Performance Specifications, the Statement of Work (SOW), and solicitation requirements.

Offerors' technical and price proposal shall be prepared in accordance with the requirements of this provision.

Clarity and conciseness of the material presented may have a bearing upon proposal evaluation. While only relevant material should be included, the material must be complete. Any offeror's experience, capability, knowledge and understanding not specifically described in the submitted proposal will not be assumed to exist by the Government during evaluation.

The technical proposal and the cost/price proposal shall be submitted separately. The technical proposal shall not contain any cost/pricing information.

Full, accurate and complete information shall be set forth in the submissions to facilitate a thorough and timely evaluation by the Government. This will be an acquisition effort utilizing a best value approach. The Offeror(s) product samples and proposals will be evaluated to ensure that their system complies with the criteria listed in the solicitation.

Offerors are cautioned that the Government reserves the right to make award based on initial offers without discussions with offerors. Therefore, it is imperative that the information provided in the offeror's response to the solicitation be complete and accurate and that the prices proposed be the offeror’s best terms. Therefore, each initial offer should contain the offeror’s best terms from a price and technical standpoint. However, if considered necessary by the contracting officer, discussions may be conducted with those offerors determined to be in the competitive range.

(b) The offeror shall submit the following information:

(1) SOLICITATION PACKAGE: Completed signed solicitation package to include signed Amendments, all representations and certifications executed, Subcontracting Plan in accordance with clause 52.219-9, and a cover letter. The cover letter shall be signed by an individual authorized to commit the company to the proposal. The cover letter required by this paragraph is in addition to the requirements of FAR 52.212-1, paragraph (b). Two (2) hard copies and one (1) CD-ROM required.

It shall state

Solicitation Number (N00164-17-R-JN53) Commercial and Government Entity (CAGE) number, Duns Number, Taxpayer Identification Number (TIN), Name, address and telephone number of the cognizant DCMA Office (can be found at http://www.dcma.mil/ ) Proposal validity through 30 September 2017.

Names, telephone numbers and email addresses of persons authorized to conduct negotiations, as well as the names of the official authorized to bind the offeror’s organization shall be clearly identified, Any exceptions taken to any requirements of the solicitation, to include but not be limited to technical exceptions, clauses and or provisions. The cover letter shall indicate in which volume and on what page of the offeror’s proposal the exception is addressed.

A copy of the offerors SAM registration information from the SAM website. This does not count towards the page limitation of the cover letter.

(2) Proposals shall not contain classified information.

(3) Mailed or Commercial Delivery of Proposals. Mailed or commercially delivered proposals shall be sent to the following address:

NAVAL SURFACE WARFARE CENTER CRANE DIV

EMILY JOHNSON (3373)

BLDG 41 SE CENTRAL RECEIVING

300 HWY 361

CRANE, IN 47522-5001

TEL:812-854-8653

Proposals are due by the date and time in Block 8 on Page 1 of the solicitation. Please notify the Contract Specialist at emily.a.johnson@navy.mil when a hard copy is being sent and provide a copy of the shipping label.

Hand delivered proposals will not be accepted. All offers must be mailed via USPS or by overnight courier. If using an overnight courier, it is the offeror’s responsibility to ensure that the courier service has access to NSWC Crane. Only approved couriers will be given access to the base to make delivery.

(c) Technical Proposal.

Each technical proposal shall enable Government evaluating personnel to make a thorough evaluation and arrive at a sound determination as to whether or not the proposal will meet the requirements of the government as specified in the solicitation. To this end, each technical proposal shall be so specific, detailed and complete as to clearly and fully demonstrate that the prospective contractor has a thorough knowledge and understanding of the requirements.

Statements which paraphrase the specifications or attest that "standard procedures will be employed," are inadequate to demonstrate how the offeror proposes to comply with the requirements of the solicitation, and this clause.

Statements that the offeror "understands" the methods and procedures for performing the described requirements will be considered inadequate as will statements such as "straightforward engineering techniques" and the "highest quality control procedures". The material must be sufficiently detailed to demonstrate an understanding of the technical Factors and Subfactors and the solicitation requirements. See the below paragraph (j) FACTOR I – TECHNICAL for detailed instructions. Two (2) hard copies and one (1) CD-ROM required.

(d) Past Performance Proposal See detailed instructions under element (k) FACTOR II -Past Performance below.

(e) Price Proposal

The offeror shall submit prices for items listed in SECTION “1.0”. The prices shall include all shipping and be proposed F.O.B. Destination. The prices are to be provided in the Pricing Matrix by Box, with the quantity breakpoints (if different) completed. All pricing shall be confined exclusively to the pricing proposal. No pricing information is permitted in the technical proposal. Two (2) hard copies and one (1) CD-ROM required. All pricing shall be confined exclusively to the pricing proposal. No pricing information is permitted in the technical proposal.

(f) Exceptions.

Offerors are not encouraged to take exceptions to this solicitation; however, any exceptions taken to the specifications, terms and conditions of this solicitation shall be explained in detail and set forth in the Cover Letter.

Offerors are to detail the particular section, clause paragraph and page to which they are taking exception.

ANY EXCEPTION TO THE GOVERNMENT'S TECHNICAL REQUIREMENTS/SPECIFICATIONS

MUST BE INCLUDED IN THE TECHNICAL PROPOSAL AND THE COVER LETTER.

The following information, as a minimum, shall be included in the Title Page for each Factor:

RFP Number Name of Offeror Date of Submission Factor Title

Requirements for the contents of each of the submitted written proposals are identified below. The order of presentation in the offeror's submitted written proposal shall correspond to the order of the Factors and Subfactors discussed below. The content requirements described below address major topics of concern to the Government.

Failure to respond to any of these topics will be consider a "deficiency". Any additional text provided must be relevant and demonstrate capabilities beneficial to the overall requirements described in this solicitation. Each written proposal must be separate and contain sufficient information to permit a detailed evaluation. Previously submitted data, if any, will not be used in the evaluation of your response to this solicitation.

(g) Product Samples:

Offerors shall provide 1,200 rounds of product samples for the .40 caliber frangible ammunition that is being solicited. Please submit product samples to the following address:

N00164

NSWC CRANE DIVISION

BLDG 2390

300 HWY 361

CRANE, IN 47522

MARK FOR: J. SCOTT JOHNSON (CODE JXNN, 812-854-5857)

Product samples will first be evaluated by NSWC Crane against Performance Specification DTL-JXNN-F17-0018, Go/No Go criteria. The DTL-JXNN-F17-0018, Go/No Go criteria is listed under 52.212-2 Evaluation -- Commercial Items. Any product sample, provided as part of the proposal, that fails to meet any of the Go/No- Go requirements, as defined herein, will cause the proposal to be given no further consideration for award.

Proposed product samples passing all Go/ No Go criteria requirements tests will then be subjected to further product sample evaluation in accordance with (IAW) the Factor and Subfactor requirements of this solicitation (see Subfactor A below).

Product sample(s) for the item indicated in this solicitation is required and must be furnished as part of the offer. The sample(s) must be received on or before the time set forth for receipt of offers noted in Block 8 of page 1 of this solicitation.

Proposals are due by the date and time in Block 8 on Page 1 of the solicitation. Please notify the Contract Specialist at emily.a.johnson@navy.mil when a hard copy is being sent and provide a copy of the shipping label.

(j) FACTOR I – TECHNICAL

In addition to the product samples, the offerors shall submit a written proposal in response to the factors and subfactors described in the solicitation in such detail to allow the Government to evaluate the proposal.

Each Factor within the written proposal shall be submitted in separate Sections. The following are the factors and subfactors. (SEE FAR clause 52.212-2 for relative order of importance)

SUBFACTOR A – PRODUCT SAMPLE EVALUATION

Offerors shall ensure that product samples submitted are functional working units and are the exact units being proposed by the offeror to satisfy the requirements in the solicitation. If an offeror submits a defective product sample or the product sample malfunctions during testing it will not be returned to the offeror for rework or replacement. 1,200 identical rounds per each proposal (if submitting multiple proposals) are required.

Resubmission of product sample(s) will not be allowed during the Product Sample Evaluation [and Final Proposal Revision phase]. An unacceptable rating in the Product Sample Evaluation subfactor will render the offeror technically unacceptable and the offer will be ineligible for award.

SUBFACTOR B – WRITTEN PERFORMANCE & WRITTEN TECHNICAL PROPOSAL

DOCUMENTATION MATRIX

Describe system characteristics and performance with respect to the thresholds specified in the Performance Specification. Provide documentation to demonstrate that the system meets or exceeds each requirement specified in the Performance Specification. If your system does not meet the minimum requirements of the Performance Specification, describe the exceptions. If the offeror’s Product Sample does not fully comply with each and every requirement identified in the performance specification, the proposal shall describe in detail how the offeror is going to comply with those requirements that are not satisfied.

Offerors shall complete the Prerequisite Written Technical Proposal Documentation Matrix provided as Attachment (03) to summarize compliance with the technical requirements to the paragraph in the Offeror’s proposal that demonstrates the Offeror’s ability to meet the requirements listed in the Performance Specification.

The matrix shall be cross-referenced to the Performance Specification by paragraph number and title to facilitate Government verification that all items have been addressed.

SUBFACTOR C – DELIVERY/PRODUCTION SCHEDULE

Offerors shall address compliance and ability to satisfy the delivery schedule requirements as stated in the RFP.

SUBFACTOR D – SMALL BUSINESS PARTICIPATION

The Small Business Participation Data portion of the proposal shall be submitted as Attachment (01) - Small Business Participation Data Form.

In accordance with FAR 15.304, it is the intent of the Government to encourage participation of small businesses whenever practicable. Describe the extent to which their company has identified and committed to provide for participation by small, small and disadvantaged businesses (SDB), woman-owned businesses (WOB), veteran owned small business and service-disabled veteran owned small business, and HUBZone small business concerns for the performance of this effort. Offerors shall provide sufficient information to demonstrate that the tasks assigned the selected subcontractors are meaningful in the sense that they will be performing functions important to the overall success of the program and also broaden the subcontractor's technical capability. Offerors shall describe their approach for enhancing small business subcontractors' technical capability. Of special interest is the amount and type of work to be performed by the small business subcontractors. Offerors shall explain how you, as the offeror, believe the proposed approach and plan for use of small business is realistic for this procurement.

Note: Submission shall be separate from subcontracting plans to be submitted by large business pursuant to FAR 52.219-9.

(k) FACTOR II – PAST PERFORMANCE

1.) The offeror shall provide a maximum of five (5) past performance references on prior contracts that are recent and relevant to this requirement. See below for what constitutes a “recent” and “relevant” prior contract for purposes of this solicitation. The offeror shall contact past performance references directly and request that they complete and submit directly to the agency, the Past Performance Questionnaire (PPQ) (Attachment (02) – Past Performance Questionnaire) to the address in Block 9 of SF1449, Page 1 of the Solicitation or to emily.a.johnson@navy.mil in accordance with the timeline set in Block 8 of SF1449, Page 1 of the Solicitation.

The completed questionnaires shall be sent directly from the reference POC to the contract specialist, Emily Johnson, e-mail: emily.a.johnson@navy.mil . Under no circumstances shall the questionnaires be returned to the offerors. Any information provided by the offeror’s references is subject to verification/validation by the Government during the evaluation process. The Government may make contact and follow up with the listed references identified on the Contractor Past Performance Data matrix.

The Offeror may provide information on problems encountered on the identified contracts as well as the Offeror’s corrective actions.

2.) Offeror shall provide a one (1) page matrix identifying the following information for each of the PPQs sent out:

1) Organization/Customer

2) Brief Description

3) Contract Number

4) Telephone & E-mail of Organization/Customer Point of Contact (POC)

Proposals must prove PPQs have been sent to each POC; failure to send the PPQ to each POC may result in exclusion of the offeror’s proposal from consideration for award. The offeror shall exert its best efforts to ensure that at least two POCs per relevant contract submit a completed PPQ directly to the Government.

3.) Offerors should include a discussion of any significant achievements and explain any rectification of Past Performance problems that are relevant to the proposed efforts.

4.) For the purposes of this solicitation, recent contracts are defined as those on which performance occurred during the last three (3) years. In determining relevancy, the offeror should consider the size, content, and complexity type and value of the contract, and the type of requirement compared to this solicited requirement. The offeror should also consider the level or amount of effort. Only past performance dealing with .40 caliber frangible ammunition or a similar caliber will be considered relevant. The offeror must provide details (if its Past Performance reference is based upon “related technology” as a reference) including how the “related technology” is applicable to the solicited effort.

Should the offeror not explain how the related technology is applicable, the reference may not be considered relevant. If an offeror has no current or relevant past performance information for itself, its predecessor companies, its key personnel who will perform this contract, or its major or critical subcontracts, the Offeror should so state that and explain.

5.) Each offeror shall submit present and past performance information for itself on projects of similar size, scope, and technical complexity. The Offerors may choose to submit present and past performance information for subcontractors, team members, or joint venture partners that have experience in projects of similar size, scope, and technical complexity with its proposal. The total number of past performance references for each offeror shall not exceed five (including any references submitted by subcontractors, team members and/or joint ventures). Offerors shall include in their proposal the written consent of their proposed major subcontractors to allow the Government to discuss the subcontractor’s past performance assessment with the offeror during negotiations. This section shall provide a list of current and relevant contracts on which the offeror has performed in the format requested in the Proposal Requirements portion of this document. This information, as well as other information the Government may obtain elsewhere via Government databases (CPARs, PPIRs etc.) and other government agencies (DCMA, DCAA etc.), will be used to evaluate the offeror's past performance. The Government reserves the right to solicit feedback beyond what is identified in the questionnaire. NO CLASSIFIED PAST PERFORMANCE SUPPLEMENTS WILL BE ACCEPTED. Two (2) hard copies and 1 CD-ROM required.

(l) FACTOR III – PRICE

(a) Price Proposal - The offeror shall complete the price matrices. Pricing shall not be submitted in any other area of the proposal.

(b) The offeror shall provide any recommended quantity break changes to improve price to the Government.

(c) CLINs 0002 and 0008, Data, shall not be separately priced within vendor’s proposal.

(m) ALTERNATE PROPOSALS

In addition to submitting completed price matrices for the items that your company is proposing on, a proposal with alternate stair-step quantities may be submitted. If a company elects to submit an alternate proposal, it will be evaluated by the Government if determined to be advantageous to the Government. If the alternate proposal involves a different configuration of the round then an additional 1,200 rounds of the alternate configuration is required to be submitted for the product sample evaluation.

(End of Summary of Changes)