Minimum Requirements For Aqueous Parts Washer.pdf
PDF 124 KB Posted
- Attached to
- Wheel/Parts Aqueous Washer
- Solicitation number
- W50S9G22Q0010
View the file
Other files
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Minimum Requirements for Aqueous Parts Washer
Aqueous Parts washer must be compatible with any of the three cleaning compounds required:
AIR FORCE TO 4W-1-61 and AF DWG 9825019-21
Calla 296
DSF-1
SB 300 LFM
Adequate ventilation must be provided:
Mechanical ventilation systems must meet requirements of AFOSH STD 48-137.
Rinse Required:
Rinse cycle required following clean cycle.
Drying required:
Drying cycle immediately after rinse cycle.
Interior minimum dimensions:
Minimum 42” turntable
- Wheel mount/tree
- Bearing mount/tree
Exterior Maximum Dimensions:
70” L x 70” W x 95” H.
Door requirement:
The door to the unit must have the hinge on the right side so that the door will open from left to right.
Wall power unit:
Maximum 460V/60AMP.
Removal of old washer:
No machine in place.
Installation of new washer:
Required
Training of personnel on equipment:
Required
Options not listed above are not required
There is currently no exhaust vent in room where installation will be. Walls are cinder block, ceiling is Spancrete.
File details come from the government source that posted it. Updated .