McAlpine WWMF Centrifuge Access Platforms.pdf

MCALPINE WWMF CENTRIFUGE ACCESS PLATFORMS

ITB# FY27-ITB-04 OCTOBER 1, 2026 1

CITY OF CHARLOTTE-CHARLOTTE WATER

5100 BROOKSHIRE BLVD., 2ND FLOOR

CHARLOTTE, NORTH CAROLINA 28216

Date: OCTOBER 1, 2026 Bid Number: FY27-ITB-04

Subject: Invitation to Bid on the following apparatus, supplies, materials, equipment and/or services for:

MCALPINE WWMF CENTRIFUGE ACCESS PLATFORMS

This letter extends an invitation for the submission of a Bid to supply the City of Charlotte with apparatus, supplies, materials, equipment, and/or services as indicated above. The City of Charlotte uses an eProcurement Portal (“Procurement Portal” - https://charlottenc.bonfirehub.com) to accept and evaluate bids digitally. Bids must be submitted electronically through the Procurement Portal on or before the Bid Due Date to be accepted.

No Pre-Bid Meeting will be held for this procurement.

Any changes to the terms, conditions, or specifications stated in this ITB will be documented in a written addendum and will be posted on the Procurement Portal. Each Bidder is required to acknowledge receipt of all addenda. Please note that we may not consider any Bid that fails to acknowledge receipt of each issued addendum.

A response from your Company to this ITB would be appreciated. Questions should be submitted in writing through the Vendor Discussions feature of the Procurement Portal.

Sincerely, Wendy Raiford Procurement Officer, Charlotte Water Acquisition and Compliance https://charlottenc.bonfirehub.com/

ITB# FY27-ITB-04 OCTOBER 1, 2026 2

Checklist for Submitting a Bid:

Step 1 Read the document thoroughly.

Step 2 Review the solicitation timeline and upcoming events in the Procurement Portal and download copies of any documents if you plan to submit a Bid.

Step 3 Submit any questions via the Vendors Discussion feature of the Procurement Portal by the deadline(s) noted for the solicitation.

Step 4 Conduct a thorough review of the Sample Contract. Any exceptions to the Sample Contract must be uploaded in Word format (with redlines/tracked changes) or, alternatively, submit an “Exceptions Form.” An “Exceptions Form” template is found under the Public Files in the Procurement Portal.

Step 5 Monitor the Procurement Portal for any addendums and responses to questions.

If you plan to submit a Bid, you must submit all required documents and respond to all questions within the Procurement Portal for the ITB.

If awarded a contract, your company must provide an insurance certificate(s) that meets or exceeds the requirements outlined in the Sample Contract.

ITB# FY27-ITB-04 OCTOBER 1, 2026 3

TABLE OF CONTENTS

INSTRUCTIONS TO BIDDERS

1.1. REVIEW AND COMPLY:

1.2. DEFINITIONS:

1.3. CONTRACT DOCUMENTS:

1.4. EXCEPTIONS:

1.5. MULTIPLE/ALTERNATE BIDS:

1.6. HOW TO PREPARE BID RESPONSES:

1.7. HOW TO SUBMIT BID RESPONSES:

1.8. BID OPENING:

1.9. TRADE SECRETS AND PERSONAL IDENTIFICATION INFORMATION:

1.10. QUESTIONS:

1.11. HOW TO SUBMIT AN OBJECTION RELATING TO THIS INVITATION TO BID:

1.12. BINDING OFFER:

1.13. ERRORS IN BIDS:

1.14. CITY’S RIGHTS AND OPTIONS:

1.15. BIDS ON ALL OR PART:

1.16. INVITATION TO BID NOT AN OFFER:

1.17. CHARLOTTE BUSINESS INCLUSION PROGRAM:

1.18. EQUAL OPPORTUNITY:

1.19. NO COLLUSION OR CONFLICT OF INTEREST:

1.20. ANTI-LOBBYING PROVISION:

1.21. CERTIFIED TEST REPORT:

1.22. BRAND NAME:

1.23. TO SUBMIT A PROPOSED ALTERNATE PRODUCT IN LIEU OF A SPECIFIED BRAND:

1.24. STATUTORY REQUIREMENTS:

1.25. GUARANTOR:

1.26. AWARD CRITERIA:

1.27. ENVIRONMENTAL PREFERABLE PURCHASING:

1.28. CONTRACT AWARD BY CHARLOTTE CITY MANAGER:

1.29. PROCUREMENT SCHEDULE

1.30. POST-AWARD CONFERENCE:

TERMS AND CONDITIONS

2.1. CONTRACT TYPES:

2.2. TERMS OF CONTRACT:

2.3. NOTICE TO PROCEED:

2.4. DELIVERY TIME:

2.5. PRICES ARE FIRM:

2.6. PROMPT PAYMENT DISCOUNTS:

2.7. QUALITY:

2.8. INSPECTION AT BIDDER’S SITE:

2.9. CERTIFICATION OF INDEPENDENT PRICE DETERMINATION:

2.10. INSURANCE:

SPECIFICATIONS

ITB# FY27-ITB-04 OCTOBER 1, 2026 4

3.1. BACKGROUND:

3.2. SCOPE:

3.3. MANUFACTURER/MODEL:

3.4. PRODUCT SPECIFICATIONS:

3.5. PRODUCT STANDARDS:

3.6. ALTERNATE PRODUCTS:

3.7. WARRANTY:

3.8. FABRICATION:

3.9. INSTALLATION:

3.10. PRICING:

3.11. DELIVERY AND STORAGE:

3.12. DELIVERY PERSONNEL:

3.13. INVOICES:

3.14. AWARD OF CONTRACT:

3.15. CITY CONTRACTING REQUIREMENTS:

3.16. ITEMS UNDER CONTRACT:

3.17. CUSTOMER SERVICE REPRESENTATIVE:

3.18. PERMITTING RESPONSIBILITIES:

3.19. NO LIMITATIONS ON DISCLOSURE

Section One Instructions to Bidders

MCALPINE WWMF CENTRIFUGE ACCESS PLATFORMS

ITB# FY27-ITB-04 OCTOBER 1, 2026 5

INSTRUCTIONS TO BIDDERS

1.1. Review and Comply:

Each reference to this Invitation to Bid (“ITB”) includes all components listed in the Table of Contents above. Please review each of them carefully. Bidders will be held accountable for having full knowledge of the contents of this ITB and for performing any due diligence that may be necessary to submit a binding Bid.

1.2. Definitions:

Addendum: Refers to any and all modifications or additions to this Invitation to Bid issued in writing by Charlotte Water Acquisition and Compliance.

Bid: Refers to a bid submitted by a company in response to this Invitation to Bid. A Bid shall be submitted on the Procurement Portal.

Bid Response Forms: Refers to the forms that a Bidder is required to complete and return as its Bid, as included in the Public Files on the Procurement Portal.

Bidder: Refers to a person or entity that submits a Bid.

CBI: Refers to the Charlotte Business INClusion office of the City of Charlotte.

Charlotte Combined Statistical Area (CSA): Refers to the area consisting of the North Carolina counties of Anson, Cabarrus, Cleveland, Gaston, Iredell, Lincoln, Mecklenburg, Rowan, Stanly, and Union, and the South Carolina counties of Chester, Lancaster, and York; criteria used by Charlotte Business INClusion to determine eligibility to participate in the program.

City: Refers to the City of Charlotte, North Carolina.

Company: During the solicitation process, refers to a company interested in providing the Products and Services. The solicitation process refers to a company that enters into a Contract with the City for all or part of the Products and Services covered by this ITB.

Contract: A Bidder agrees to provide all or part of the Products and Services to the City. A Contract shall include the Terms and Conditions set forth in the Sample Contract provided in the Public Files on the Procurement Portal.

Environmentally Preferable Products: Products that have a lesser or reduced effect on human health and the environment when compared with competing products that serve the same purpose. This comparison may consider raw materials acquisition, production, manufacturing, packaging, distribution, reuse, operation, maintenance, or disposal of the product.

Post-Consumer Recycled Material: Refers to material and by-products that have served their intended end-use by a consumer and have been recovered or diverted from solid waste. It does not include those materials and by-products generated from, and commonly reused within, an original manufacturing process.

Procurement: Refers to Charlotte Water Acquisition and Compliance.

Products: Refers to all products that the Bidder agrees to provide to the City as part of its Bid.

MCALPINE WWMF CENTRIFUGE ACCESS PLATFORMS

ITB# FY27-ITB-04 OCTOBER 1, 2026 6

Recyclability: Products or materials that can be collected, separated, or otherwise recovered from the solid waste stream for reuse or used in the manufacture or assembly of another package or product through an established recycling program. For products made of recyclable and non-recyclable components, the recyclable claim should be adequately qualified to avoid consumer deception about which portions or components are recyclable.

Recycled Material: Refers to material and by-products that have been recovered or diverted from solid waste for recycling. It does not include those materials and by-products generated from, and commonly reused within, an original manufacturing process.

Services: Refers to all services that the Bidder agrees to provide to the City as part of its Bid, including but not limited to training, warranty, and maintenance.

Small Business Enterprise (SBE): Refers to a business enterprise certified by the City of Charlotte’s CBI

Policy as meeting all of the requirements for SBE certification.

Specifications: Refers to the written description of the functions or features of the Products and Services for which the City seeks bids, as shown in Section 3.

Terms and Conditions: Refers to the City’s standard contractual terms and conditions as outlined in the Sample Contract.

1.3. Contract Documents:

Each Bid constitutes an offer to become legally bound to a Contract with the City incorporating the ITB and the Bidder’s Bid. Upon Contract award by the City Council, the City will send the successful Bidder the Contract, which shall consist of the Terms and Conditions contained in the Sample Contract and all attachments referenced therein.

1.4. Exceptions:

Each Bid submitted in response to this ITB constitutes a binding offer to comply with all terms, conditions, special conditions, specifications, and requirements stated in this ITB (including but not limited to the Terms and Conditions), except to the extent that a Bidder takes exception to such provisions in the manner required by this Section. To take exception to a provision of this ITB or Sample Contract, the Bidder must either upload a redlined version or an “Exceptions Form” via the Procurement Portal identifying each exception. Exceptions should clearly identify the following items: (1) indicate the number and title of each section of this ITB that the Bidder takes exception to; (2) identify the specific sentence within such section that the Bidder takes exception to; and (3) include any alternate provision proposed by the Bidder.

If exceptions are not identified by way of an uploaded redline version or by way of an Exceptions Form, then they may not be considered during Contract negotiations. Bidders are also reminded that a material variance from the terms of this ITB may result in the Bid being rejected by the City.

1.5. Multiple/Alternate Bids:

No Bidder shall submit more than one (1) Bid unless multiple or alternate Bids are requested in the Special Conditions. Unless expressly stated in the Special Conditions, any multiple or alternate Bids must be brought to the City's attention either during the Pre-Bid Conference or submitted in writing at least five (5) days before the opening of the Bid.

1.6. How to Prepare Bid Responses:

All bids shall be prepared as follows:

MCALPINE WWMF CENTRIFUGE ACCESS PLATFORMS

ITB# FY27-ITB-04 OCTOBER 1, 2026 7

• Complete the Bid Response Forms provided in the Procurement Portal under the “Requested Information”. Bid responses must be submitted only on these forms.

• Bid responses must be typewritten and signed by the Bidder or the bidding firm's authorized representative. All erasures or corrections must be initialed and dated by the person who signs the Bid Response Form on behalf of the Bidder.

• Bids must be accompanied by accurate descriptions of the exact materials, supplies, vehicles, and/or equipment offered for purchase. The Specifications may require copies of detailed factory specifications, ratings, technical data, etc., be submitted along with the Bidder's response package.

1.7. How to Submit Bid Responses:

All Bidders shall:

• Submit their electronic Bid proposal via the eProcurement Portal at https://charlottenc.bonfirehub.com no later than October 13, 2026, at 3:00 p.m. EST. The original Bid shall be complete and unabridged and shall not refer to any other copy of the signed and sealed original for any references, clarifications, or additional information.

When received, all Bids and supporting materials, as well as correspondence relating to this ITB, shall become the property of the City.

Bids not received by the time and date specified in this section will not be considered unless the delay results from the negligence of the City, its agents, or assigns.

Note that the Bid opening date listed above is based on the assumption that one or more Bidders will submit samples of alternate products for evaluation by the City. In the event no samples are submitted, or in the event, the evaluation does not require as much time as anticipated, the City may move up the Bid opening date by issuing a written addendum to this ITB. The City reserves the right to change the Bid opening date, or any other dates relevant to this procurement process, at any time in its sole discretion.

1.8. Bid Opening:

1.8.1 Bids will be opened publicly at 5100 Brookshire Blvd. Charlotte, NC 28216, 2nd Floor

Library, Room 215, unless obviously non-responsive, read aloud publicly.

1.8.2 As a courtesy, the public may also view the bid opening virtually by calling 1-872-256-

4172 (Conference ID: 148 672 622#) or by visiting Microsoft Teams Meeting.

1.8.3 Charlotte Water is not responsible for technical difficulties experienced by those attending virtually and will proceed with opening bids in accordance with Section 1.8.1.

1.9. Trade Secrets and Personal Identification Information:

Definition Upon receipt by City Procurement, all materials submitted by a Bidder (including the Bid) are considered public records except for: (1) material that qualifies as “trade secret” information under N.C. Gen. Stat. § 66-152 et seq. (“Trade Secrets”), or (2) “personal identification information” protected by state or federal law, to include, but not be limited to, Social Security numbers, bank account numbers, and driver’s license numbers (“Personally Identifiable Information” or “PII”).

Instructions for Marking and Identifying Trade Secrets If any Bid contains Trade Secrets or PII, such Trade Secrets and PII must specifically and clearly be identified in accordance with this Section by clearly separating them from the rest of the Bid and marked either “Personally Identifiable Information – Confidential” or “Trade Secret— Confidential and Proprietary Information.” This confidentiality caption must appear on each page of the Trade Secret or PII materials, and the document(s) must be submitted separately in the Procurement Portal.

https://charlottenc.bonfirehub.com/ https://teams.microsoft.com/meet/219450944581682?p=j4bCodsHyClViuiTjF

MCALPINE WWMF CENTRIFUGE ACCESS PLATFORMS

ITB# FY27-ITB-04 OCTOBER 1, 2026 8

Availability of Bids to City Staff and Contractors By submitting a Bid, each Bidder agrees that the City may reveal any Trade Secret materials and PII contained therein to all City staff and City officials involved in the selection process, and to any outside consultant or other third parties who assist in the selection process or who are hired or appointed by the City to assist in the selection process.

Availability of Bids via Public Records Requests Any person or entity (including competitors) may request Bids submitted in response to an ITB.

Only those portions of ITBs properly designated as Trade Secret or PII are not subject to disclosure.

The public disclosure of the contents of a Bid or other materials submitted by a Bidder is governed by N.C. Gen. Stat. §§ 132 and 66-152, et seq.

When determining whether to mark materials as Trade Secret, please note the following:

• Entire Bids may not be marked as Trade Secret; and

• Pricing may not be marked as Trade Secret.

The City may disqualify any Bidder that designates its entire Bid as a Trade Secret or PII, or any portion thereof that clearly does not qualify under applicable law as a Trade Secret or PII. Each Bidder agrees to indemnify, defend, and hold harmless the City and each of its officers, employees, and agents from all costs, damages, and expenses incurred in connection with refusing to disclose any material that the Bidder has designated as a Trade Secret or PII. This includes an obligation on the part of the Bidder to defend any litigation brought by a party that has requested Bids or other information that the Bidder has marked Trade Secret or PII.

1.10. Questions:

To ask questions about this ITB: (1) submit a question in writing under the Vendor Discussion feature of the Procurement Portal). Bidders should refrain from contacting City staff prior to the Bid opening date. The City is not bound by any statements, representations or clarifications regarding this ITB other than those provided in writing by the Procurement Officer.

Questions should reference the ITB page and topic number. Questions must be submitted by 2:00 p.m. EST on October 7, 2026.

The City will post answers to questions posed by prospective Bidders and/or general information concerning this ITB in the form of an addendum to the ITB on the Procurement Portal. The prospective Bidder is responsible for checking the Procurement Portal for any addenda issued for this ITB.

A Pre-bid Conference will not be held for this solicitation.

1.11. How to Submit an Objection Relating to This Invitation to Bid:

When a Pre-Bid Conference is scheduled, Bidders should either present their objection at that time (either verbally or in writing) or submit a written objection through the Procurement Portal before the scheduled Pre-Bid Conference.

When a Pre-Bid Conference is not scheduled, Bidders must submit objections in writing through the Procurement Portal at least ten (10) days before the opening of the Bid.

Except for objections raised at the Pre-Bid Conference, all objections must be in writing and directed to the Procurement Officer designated in the preceding section.

Failure to object in the manner specified above shall constitute a waiver of any objections the Bidder may have to the terms of this ITB or anything that occurred in the Bid process through the end of the Pre-Bid Conference.

MCALPINE WWMF CENTRIFUGE ACCESS PLATFORMS

ITB# FY27-ITB-04 OCTOBER 1, 2026 9

1.12. Binding Offer:

Each Bid shall constitute a firm offer that is binding for one hundred twenty (120) calendar days from the Bid opening date.

1.13. Errors in Bids:

Withdrawal of inadvertently erroneous Bids may be permitted where appropriate if the request is submitted to the City within seventy-two (72) hours after Bid opening, not including Saturdays, Sundays, and other days the City of Charlotte is not open to the public for business. A request for withdrawal must be made in writing and directed to the PROCUREMENT_OFFICER through the Procurement Portal. Consideration of a request to withdraw a bid will be made in accordance with N.C. Gen. Stat. § 143-129.1.

In case of Bidder errors calculating “extended” prices stated in a Bid, the unit prices shall govern.

1.14. City’s Rights and Options:

The City reserves the following rights, which may be exercised at the sole discretion of the City of Charlotte:

• to supplement, amend, substitute, or otherwise modify this ITB at any time;

• to cancel this ITB with or without the substitution of another ITB;

• to take any action affecting this ITB, this ITB process, or the Products or Services subject to this ITB that would be in the best interests of the City;

• to issue additional requests for information;

• to require one or more Bidders to supplement, clarify, or provide additional information in order for the City to evaluate the Bids submitted;

• to conduct investigations concerning the qualifications and experience of each Bidder;

• to change the Bid opening date or any other dates relevant to this ITB;

• to waive any defect or irregularity in any Bid received;

• to reject any or all Bids;

• to award all, none, or any part of the items that are in the best interest of the City, with one or more of the Bidders responding, which may be done with or without re-solicitation; and

• to enter into any agreement deemed by the City to be in the City's best interest, with one or more of the Bidders responding.

1.15. Bids on All or Part:

Unless otherwise specified by the City or the Bidder, the City reserves the right to award all or part of the items to be purchased. Bidders may restrict their bids to aggregate consideration by stating in the Bid. However, Bids restricted to consideration in the aggregate must also include a unit price on each item Bid.

1.16. Invitation to Bid Not an Offer:

This ITB does not constitute an offer by the City. No recommendations or conclusions from this ITB process shall constitute a right (property or otherwise) under the Constitution of the United States or under the Constitution, case law, or statutory law of North Carolina.

1.17. Charlotte Business INClusion Program:

Pursuant to Charlotte City Council’s adoption of the Charlotte Business INClusion (CBI) Policy, the CBI program seeks to enhance competition and participation of Small Business Enterprises (SBEs) in City contracting. To accomplish this, the City has examined its procurements and set

MCALPINE WWMF CENTRIFUGE ACCESS PLATFORMS

ITB# FY27-ITB-04 OCTOBER 1, 2026 10

specific SBE participation goals on a contract-by-contract basis. In addition, CBI makes a concerted effort to expand its certified SBE vendor pool and assist city-certified firms in growing, enhancing, and developing their businesses. CBI offers numerous development programs supporting certified businesses in organizational training, strategic development, and networking opportunities.

The CBI Policy and CBI Manual are posted online here: www.charlottebusinessinclusion.com.

To determine whether disparities exist in City contracting based on race-neutral and gender-neutral factors, and also to measure the effectiveness of the City’s Charlotte Business INClusion (“CBI”) Program, the City tracks the utilization of subcontractors and suppliers on specific City contracts based on race-neutral and general-neutral small business enterprise status (SBE). It is important that the City obtain this data only City-certified SBE suppliers and subcontractors and also for other subcontractors and suppliers. As a condition for receiving payments under this Contract, the Bidder agrees to submit any payment record into InclusionCLT, or any subsequent system designated by the City, detailing the amounts paid by the Consultant to all subconsultants and suppliers receiving payment in connection with this Contract.

City-certified SBE firms can be found in the City’s InclusionCLT system:

https://charlotte.diversitycompliance.com/.

1.18. Equal Opportunity:

The City has an equal opportunity purchasing policy. The City seeks to ensure that all segments of the business community have access to supplying the products and services needed by City programs. The City provides equal opportunity for all businesses and does not discriminate against any Bidders regardless of race, color, religion, age, sex, and national origin or disability.

1.19. No Collusion or Conflict of Interest:

By responding to this ITB, the Bidder shall be deemed to have represented and warranted that the Bid is not made in connection with any competing Bidder submitting a separate response to this ITB and is in all respects fair and without collusion or fraud.

Bidder shall also be deemed to have represented and warranted that none of Bidder’s or its subcontractors’ owners, employees, directors, or contractors will be in violation of the City’s Conflict of Interest Policy for City, Secondary and Other Employment Relationships (HR 13) if a Contract is awarded to the Bidder.

1.20. Anti-lobbying Provision:

Maintaining the integrity of its ITB process is of paramount importance for the City. To this end, we ask each Bidder’s cooperation in voluntarily refraining from contacting any members of the Charlotte City Council until the award of this Contract is presented to them for approval.

1.21. Certified Test Report:

If the Specifications or Special Conditions require a certified test report, Bidders shall provide such report at their expense, before or with their sealed Bids. The certified test report shall be from a recognized independent testing laboratory or manufacturer’s quality control laboratory and shall show all test results and full compliance with the applicable Specifications.

1.22. Brand Name:

If and whenever brand names, makes, names of manufacturers, trade names, Bidder catalogs, or model numbers are stated in this ITB, they are for the purpose of establishing a grade or quality of material. The City will evaluate any approved alternates to specified brand names as provided in Section 1.22-1.23 of this ITB, except for items identified in Section 3 as Products for which no substitute is acceptable.

1.23. To Submit a Proposed Alternate Product In Lieu of a Specified Brand:

No alternate products will be considered for this contract.

http://www.charlottebusinessinclusion.com/ https://charlotte.diversitycompliance.com/

MCALPINE WWMF CENTRIFUGE ACCESS PLATFORMS

ITB# FY27-ITB-04 OCTOBER 1, 2026 11

1.24. Statutory Requirements:

Any Bid submitted in response to this ITB shall be deemed to include full conformance with all North Carolina statutory requirements and the Federal Government's statutory requirements, to the extent applicable. It is the responsibility of each Bidder to conduct its due diligence as to what statutory requirements may apply.

1.25. Guarantor:

If the Bidder is a subsidiary of another entity, the City requires that the Bidder’s parent entity provide a guarantee of payment of all of the Bidder’s obligations under the Contract. The City may also require that the Bidder obtain a guaranty from an entity other than the parent if the City concludes that such a guaranty would be beneficial to protect the City’s interest. If the Bidder is not a subsidiary, the City may require that the Bidder obtain a guaranty of payment from another entity if the City concludes that such a guaranty would be beneficial to protect the City’s interest.

If a guarantor is required, the Bidder must: (1) identify a guarantor that is acceptable to the City,

(2) provide the City with the same financial information about the guarantor that the Bidder is required to provide about itself under this ITB; and (3) provide the City with a signed, legally binding guaranty agreement from the approved guarantor that is acceptable to the City in the City’s sole discretion. Failure to comply with the preceding shall be grounds for rejection of the Bidder’s Bid.

1.26. Award Criteria:

The City reserves the right to award a Contract to the lowest responsive responsible Bidder, taking into consideration vendor qualifications and experience, quality, delivery, workmanship, services, facility requirements, inventory control, and reporting. The City reserves the right to reject any Bid based on function, compatibility with user requirements of utility, and cost.

1.27. Environmental Preferable Purchasing:

The City promotes the practice of Environmentally Preferable Purchasing (EPP) in acquiring Products or Services. Applicable EPP attributes that may be taken into consideration as environmental criterion include the following:

Recycled content Renewable resources

Recyclability Reduced Packaging

Biodegradability Reduced toxicity

Compostability Low Volatile Organic Compounds (LVOCs)

Energy and Water Efficiency Pollution Prevention

Life Cycle Management End of Life Management

Bidders are able to supply Products or Services containing any of the applicable environmentally preferable attributes that meet performance requirements are encouraged to offer them in their Bids.

Bidders must provide certification of environmental standards and other environmental claims, such as recycled content and emissions data, or a formal statement signed by a senior company official.

1.28. Contract Award by Charlotte City Manager:

The Contract to be awarded under this ITB must be approved by the Charlotte City Manager. If such approval is granted, City Procurement will provide the Contract to the Bidder for the Bidder to sign and return. In the event City Manager approval is not received within one hundred twenty

(120) calendar days after opening of the Bids, the Bidder may request that it be released from the Bid.

MCALPINE WWMF CENTRIFUGE ACCESS PLATFORMS

ITB# FY27-ITB-04 OCTOBER 1, 2026 12

1.29. Procurement Schedule

The following chart shows the schedule of events for the conduct of this ITB. The key events and deadlines for this process are as follows, some of which are set forth in more detail in the Sections that follow:

DATE EVENT

October 1, 2026 Issuance of ITB. The City issues this ITB.

October 7, 2026 Submission of Written Questions. Final questions due no later than 2:00 p.m.

October 14, 2026 Bid Submission and Bid Opening. Bids are due by 3:00 p.m.

Please arrange for electronic bid delivery per instructions in Section 1.7. All Bids will be opened and publicly read aloud at 5100 Brookshire Blvd., Charlotte, NC 28216 in the 2nd Floor Library Room 215.

October 2026 Bid Evaluation.

October 25, 2026 Contract Award by City Manager.

November 15, 2026 Anticipated Contract Effective Date: The company begins providing the products and/or services.

1.30. Post-Award Conference:

A Post-Award Conference may be scheduled as soon as practical after the award of the Contract.

The Company shall attend the conference along with the Company’s prospective Project Manager and any anticipated major subcontractors and shall provide at such conference a written schedule for the delivery of any Products or Services for which no delivery dates have been specified in this

ITB.

Section Two Terms and Conditions

MCALPINE WWMF CENTRIFUGE ACCESS PLATFORMS

ITB# FY27-ITB-04 OCTOBER 1, 2026 13

TERMS AND CONDITIONS

Each Bid submitted in response to this ITB constitutes an offer to become legally bound to a Contract incorporating terms and conditions outlined in Section 2 and the Sample Contract's Terms and Conditions.

For purposes of this Section, a Bidder that enters into a Contract with the City may be referred to as the “successful Bidder” or the “Company.”

2.

2.1. Contract Types:

The Contract resulting from this Invitation to Bid will be of the type indicated below:

__X__ Definite Quantity: The Contract will be a fixed-price contract that provides for the delivery of a specified quantity of Products and Services at specified times or when ordered.

2.2. Terms of Contract:

__X___ One-Time Purchase: The contract awarded is for a specific quantity purchased at one time.

2.3. Notice to Proceed:

The successful Bidder shall not commence work or make shipment under this ITB until duly notified by receipt of an executed Contract from the City and/or through a Purchase Order (PO). If the successful Bidder commences work or makes shipment before that time, such action is taken at the Bidder's risk, without any obligation of reimbursement by the City.

2.4. Delivery Time:

When delivery time is requested in this ITB (whether in the form of a specific delivery date or a maximum number of days for delivery), time is of the essence. Each Bid shall be deemed a binding commitment of the Bidder to meet the delivery time stated herein unless the Bid specifically takes exception. If such delivery time is not met, the City shall be entitled to terminate the Contract immediately for default and/or exercise any other remedies available by law or in equity.

2.5. Prices Are Firm:

Each Bidder warrants the Bid price(s), terms, and conditions quoted in its Bid shall be firm for acceptance by the City for one hundred twenty (120) calendar days from the Bid opening date.

Once an award is made and a Contract is in place, prices shall remain firm and fixed for the entire Contract period unless otherwise allowed in the Special Conditions and stated in the Bid.

2.6. Prompt Payment Discounts:

Bidders are urged to compute all discounts into the price offered. If a prompt payment discount is offered, it will not be considered in the award of the Contract except as a factor to aid in resolving cases of identical prices.

2.7. Quality:

Unless this ITB specifically states otherwise for a particular item, all components used to manufacture or construct any supplies, materials or equipment or Products provided under this Invitation to Bid shall be: (a) new; (b) the latest model; (c) of the best quality and highest-grade workmanship; and (d) in compliance with all applicable federal, state and local laws, regulations and requirements. By “new,” the City means that the item has been recently produced and has not been previously sold or used.

Whenever this Invitation to Bid or any other part of the Contract states that a Product or Service shall be in accordance with laws, ordinances, building codes, underwriter’s codes, applicable A.S.T.M. regulations or similar expressions, the requirements of such laws, ordinances, etc., shall be construed to be minimum requirements that are in addition to any other requirements that may be stated in this Invitation to Bid or the Contract.

Section Two Terms and Conditions

MCALPINE WWMF CENTRIFUGE ACCESS PLATFORMS

ITB# FY27-ITB-04 OCTOBER 1, 2026 14

2.8. Inspection at Bidder’s Site:

The City reserves the right to inspect the equipment, plant, store, or other facilities of a Bidder prior to Contract award and during the Contract term from time to time as the City deems necessary to confirm that such equipment, plant, store, or other facilities conform with the Specifications and are adequate and suitable for proper and effective performance of the Contract. Such inspections shall be conducted during normal business hours and upon at least three (3) days’ notice to the Bidder (except that a store may be inspected at any time during regular store hours without notice).

2.9. Certification of Independent Price Determination:

By submission of a Bid, the Bidder certifies, and in the case of a joint Bid, each party thereto certifies as to its own organization, that in connection with this procurement:

The prices in the Bid have been arrived at independently, without consultation, communication, or agreement, for the purpose of restricting competition as to any matter relating to such prices with any other Bidder or with any competitor;

Unless otherwise required by law, the Bidder has not knowingly disclosed the prices that have been quoted in this bid directly or indirectly to any other Bidder or to any competition prior to the opening of the bid, and

No attempt has been made or will be made by the Bidder to induce any other person or firm to submit or not to submit a Bid for the purpose of restricting competition.

2.10. Insurance:

All Bidders must indicate compliance with the Insurance requirements stated in the General Conditions of the Sample City Contract.

Section Three Specifications

ITB# FY27-ITB-04 OCTOBER 1, 2026 15

SPECIFICATIONS

3.1. Background:

Charlotte Water, a division of the City of Charlotte, currently operates three (3) water treatment plants and six (6) wastewater treatment plants. Three (3) centrifuges were recently installed at the Residuals Management Facility within McAlpine Creek Wastewater Management Facility (WWMF). This project will provide the required elevated access platforms needed to access the recently installed centrifuges.

3.2. Scope:

The scope of this Invitation to Bid (ITB) is to establish a contract for the purchase of materials, fabrication, and installation of three (3) elevated access platforms, in accordance with the supplied construction drawings. The supplied drawings are uploaded in the Procurement Portal as a separate PDF file – Exhibit A – McAlpine Creek Centrifuge Platforms.

All Products and component parts furnished under the Contract shall be new, shall comply with the specifications and terms and conditions outlined in this ITB, and shall operate in full compliance with these Specifications.

3.3. Manufacturer/Model:

This section supersedes 1.22-1.23. The adhesive anchor system shall be Hilti Hit RE 500 V3 (ICC ESR-3814). This has been tested and evaluated by Charlotte Water and determined to be the best anchor system for the platforms. Hilti Hit RE 500 V3 (ICC ESR-3814) is the only manufacturer/model acceptable for this solicitation. Bid responses offering manufacturers/models other than the stated will not be considered.

3.4. Product Specifications:

The Company is responsible for complying with the product specifications identified in Exhibit A

– McAlpine Creek Centrifuge Platforms.

General

G1. Applicable specifications and codes A. ncbc 2018/ibc 2015/asce 7-10 with applicable editions of the code referenced standards B. aci 318 C. local jurisdiction amendments

G2. Design criteria

1. Applies to all structures (uno)

A. dead load:

1. actual tributary structure weight

2. grating: 3 psf

B. live load:

1. elevated platform: 50 psf

2. stairs: 100 psf

C. wind:

1. basic wind speed (vult/vasd): n/a

2. exposure: n/a

D. seismic:

1. above grade, non water bearing structures:

a. risk category: iii

b. importance factor: 1.25

c. spectral response acceleration, ss = 0.247

ITB# FY27-ITB-04 OCTOBER 1, 2026 16

d. spectral response acceleration, s1 = 0.105

e. site class: d

f. seismic design category: c

g. spectral response coefficient, sds = 0.263

h. spectral response coefficient, sd1 = 0.166

2. Aluminum.

A1. structural aluminum yield strengths structural aluminum: fy=35 ksi structural aluminum is alloy 6061-t6 uno

A2. dimensions:

to centerlines of columns and beams, top surfaces of beams and tubes and backs of channels and angles uno.

A3. elevations:

top of aluminum refers to top surface or flange of member uno.

A4. when fillet weld size is not indicated, provide maximum weld size for the material thickness in accordance with the latest edition of the "aluminum design manual" by the aluminum association.

A5. aluminum in contact with dissimilar materials or concrete:

contact surfaces shall be provided with galvanic separation per specifications.

A6. aluminum grating shall have bearing bars 1-1/4"x3/16" at 1-3/16" o.c. grating shall be supported on structural framing as shown. fasten grating to supports per manufacturer's specifications. provide smooth banding on all exposed edges.

3. Post-installed anchors.

PA1. provide stainless steel adhesive anchor rods complying with astm f593, type 304, minimum yield strength of 45,000 psi, with astm f594, type 304 stainless steel nuts.

adhesive anchor system shall be hilti hit re 500 v3 (icc esr-3814), or approved equivalent.

PA2. post-installed anchors shall only be used where specified on the contract drawings. the contractor shall obtain approval from the engineer–of-record (eor) prior to installing post-installed anchors for missing or misplaced cast-in-place anchors.

PA3. care shall be taken in placing post-installed anchors to avoid conflicts with existing rebar.

holes shall be drilled and cleaned in accordance with the manufacturer’s written instructions.

PA4. special inspection shall be provided for all post installed anchor (mechanical and adhesive) installations as required by the building code and applicable icc evaluation reports. independent on-site proof load testing may be required by the eor.

PA5. substitution requests, for products other than those specified, shall be submitted by the contractor to the eor along with calculations that are prepared & sealed by a registered professional engineer. the calculations shall demonstrate that the substituted product is capable of achieving the pertinent equivalent performance values (minimum) of the specified product using the appropriate design procedure and/or standard(s) as required by the building code. product icc-es code reports shall be included with the submittal package.

PA6. installer for post-installed anchors shall be trained by anchor system manufacturer or certified by training program approved by engineer.

PA7. unless noted otherwise on plans acceptable products shall be:

a. adhesive anchors for use in cracked and uncracked concrete pre-approved adhesive anchors shall have been tested and qualified for use in accordance with icc-es ac308

ITB# FY27-ITB-04 OCTOBER 1, 2026 17

3.5. Product Standards:

All materials must comply with the latest industry standards and other laws and requirements concerning building codes in North Carolina. All materials must meet the minimum requirements of the American Society for Testing and Materials (ASTM) as follows:

Stainless Steel Adhesive Anchor Rods Type 304 ASTM F 593

Stainless Steel Nuts Type 304 ASTM F 594

Copies may be obtained from the American Society for Testing and Materials, 100 Barr Harbor Dr., West Conshohocken, PA 19428.

3.6. Alternate Products:

Please refer to Sections 1.23 and 1.24 for complete details regarding the submittal of Alternate Products.

The City cannot be responsible for testing and/or accepting every new or evolving product proposed and reserves the right to reject proposed products that do not meet the City’s current business model.

3.7. Warranty:

All Products supplied under the Contract shall be covered by a manufacturer’s written guarantee and/or warranty that such Products will be free from defects in materials, workmanship, and performance for a minimum of one year, merchantable, and in full conformity with the Specifications outlined in this ITB, industry standards, dimension charts, and Bidder's descriptions, representations and samples. The Company shall administer the warranty on the City’s behalf and shall ensure that the manufacturer repairs or replaces all Products that violate either the above warranty or the applicable manufacturer’s warranty at no charge to the City.

3.7.1 The Company shall provide the City with two copies of the manufacturer’s written warranty for each item of equipment.

3.7.2 The manufacturer shall be responsible for paying all shipping and crating costs associated with warranty repairs.

3.8. Fabrication:

Platform designs from the fabricator will require dimensioned submittal drawings for approval before release for fabrication.

3.9. Installation:

Only experienced professionals should install all products. All work must be performed in accordance with the terms, specifications, and drawings, and must meet the manufacturer’s specifications and industry standards. The company is responsible for locating rebar in the slab at attachment locations using ground-penetrating radar (or other approved means) to confirm that anchor bolts do not pass through rebar or conduit in the slab. Platform anchor plates to be modified as required to avoid conflicts in the slab. The company is responsible for providing a 3rd-party Special Inspector to sign off on post-installed anchors.

3.10. Pricing:

Bids shall be submitted as a lump sum price that includes materials, labor, shipping and delivery, any discounts, submittals, vendor markup/profit, equipment costs, and temporary storage during fabrication and installation. No other charges are allowed.

3.11. Delivery and Storage:

The Centrifuge Access Platforms shall be fabricated and installed at the McAlpine Creek Wastewater Management Facility (WWMF) located at 12701 Lancaster Hwy. Pineville, NC

ITB# FY27-ITB-04 OCTOBER 1, 2026 18

28134. Delivery shall be FOB Destination. Each Bid shall be deemed a binding commitment of the Bidder to meet the delivery time stated herein. All Products and Services shall be delivered to the site within sixteen (16) weeks from Contract Execution.

3.12. Delivery Personnel:

All delivery personnel of the successful Bidder may be subject to background checks at the discretion of the City. Bids shall include company policies regarding the selection of personnel who will be frequenting City facilities.

3.13. Invoices:

The Company shall submit invoices to the City’s assigned project manager through the city’s construction management software Unity Construct. Invoices must include the item number, description, unit cost, quantity and extended price, and contract or purchase order number of each item purchased.

3.13.1 It is acknowledged and agreed that correctly priced invoices are a material element of the proposal to the City. Failure by the Company to submit correct invoices may be grounds for termination of the contract. Without limiting the City’s right to terminate the contract for incorrect pricing on invoices, the Company agrees to pay the City a service fee for correcting invoices equal to twenty-five dollars ($25) for each item incorrectly priced on an invoice. Payment must be in the form of a deduction from other amounts owed to the Company.

3.13.2 Invoices must include only Products and Services that have been delivered and completed.

3.13.3 As a condition of payment, the Company must invoice the City for Products and Services within 60 days after such Products and Services are delivered. The Company waives the right to charge the City for any products or services that have not been invoiced to the City within 60 days after such products or services were delivered.

3.14. Award of Contract:

The City reserves the right to award this contract based on the lowest responsive responsible bidder, taking into consideration vendor qualifications and experience, quality, delivery, workmanship, and any applicable environmentally preferable attributes associated with the product or services.

The City also reserves the right to award contract(s) by item, combination of items, or grand total, whichever is in the City's best interest.

The City reserves the right to add items excluded under this Invitation to Bid or to delete items included under this Invitation to Bid.

3.15. City Contracting Requirements:

The City will enter into an Agreement written by the City with the successful Bidder that contains the terms and conditions outlined in this ITB and Sample Contract. Each Bidder must state in its bid response any exceptions to the terms and conditions included in this ITB or the sample Contract and any proposed additional terms or conditions deemed necessary by the Bidder. The City will consider any such exceptions and proposed additions during the evaluation process. Any terms and conditions the Bidder does not expressly object to will be incorporated into the resultant Agreement. Notwithstanding the preceding, the City reserves the right to change the proposed contractual terms and conditions prior to contract award if it is in the City’s best interest.

The terms and conditions outlined in this ITB are not all-inclusive. The City may propose additional terms and conditions based on the responses to this ITB and the City’s analysis of the successful bid.

ITB# FY27-ITB-04 OCTOBER 1, 2026 19

The term “Contract” shall refer to the contract entered into between the City and the successful Bidder, and the term “Company” shall refer to the successful Bidder.

3.16. Items Under Contract:

The City reserves the right to add or delete items to this Contract if particular items should become discontinued or an upgraded item becomes available to the industry market. Any new or replacement items added will be subject to bid statute requirements. The City may also delete Product items included in this Contract if the City no longer needs the items.

3.17. Customer Service Representative:

The Company must dedicate a Full-Time “Account Executive” to service the City. The account executive must be available by cell phone. The cell phone must be operational at all times. All communication via phone, email, etc., must be addressed with a response within two (2) business days. The account executive must be available to attend meetings regarding Product issues upon request. The account executive will be responsible for providing immediate response and quick resolution of all the service issues and complaints of City personnel. The account executive must have an in-depth knowledge of all items provided in this bid and have immediate access to manufacturers providing the Product items. He or she must have the ability and authority to make decisions on behalf of their employer, enabling them to provide both routine and emergency services as necessary.

3.18. Permitting Responsibilities:

All permits and inspections are the sole responsibility of the successful Bidder.

3.19. No Limitations on Disclosure.

All Bidders agree that the City shall be able to disclose and distribute to any persons or entities, without restriction, all Products, samples, and other Products provided during this bid process or under the Contract. The Company agrees that the City can and will provide samples of the Products supplied under this Contract to the Company’s competitors in any future procurement process.