MATERIAL ORDERING DATA - CLIN 0002.doc
DOC document 105 KB Posted
- Attached to
- LOCK RING LATCH
- Solicitation number
- SPMYM2-24-Q-0088
About this file
This document provides material ordering data for cast copper-nickel alloy parts required under Solicitation SPMYM2-24-Q-0088 for lock rings issued by the Defense Logistics Agency Land and Maritime. The material ordering data specifies 26 castings of copper alloy UNS-designated composition per drawing number 161595 in the as-cast condition. It requires compliance with ASTM B369 and allows selection of ASME Boiler and Pressure Vessel Code requirements and optional supplementary requirements for pressure testing, inspection, certification, and product marking. Preservation, packaging, and packing must meet contract marking clauses and the specification, with the method specified in an additional data requirements section if provided.
The related solicitation is for lock rings to be procured by the Defense Logistics Agency Land and Maritime. The material ordering data template provides requirements for the cast copper-nickel alloy components to be used in manufacturing the lock rings.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| AMENDED SOLICITATION SPMYM2-24-Q-0088.pdf | ||
| DRAWINGS.pdf | ||
| SOLICITATION SPMYM2-24-Q-0088.pdf | ||
| MATERIAL ORDERING DATA - CLIN 0001.doc | DOC document |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
MATERIAL ORDERING DATA
ASTM-B-369
IDN: N4523A 3276-9141
ICN: 38MNF72101
KO: S01
KOI: 002
Paragraph 5 Ordering Data
A. ASTM-B-369, STANDARD SPECIFICATION FOR COPPER-NICKEL ALLOY CASTINGS, dated 01 APRIL 2009 (Reapproved 2016).
B. Quantity of castings:26 C. Copper Alloy UNS number (Table 2): FORMDROPDOWN
D. Pattern or drawing number: 161595 Condition (as-cast, machined, and so forth): as cast E. ASME Boiler and Pressure Vessel Code Requirements: FORMDROPDOWN
F. When material is purchased for agencies of the U.S. Government, the Supplementary Requirements of this specification may be specified.
G. The following are optional and should be specified in the purchase order when required:
FORMCHECKBOX
Pressure test or soundness requirements (Specification B 824)
FORMCHECKBOX
Witness inspection (Specification B 824)
FORMCHECKBOX
Certification (Specification B 824)
FORMCHECKBOX
Foundry test report (Specification B 824)
FORMCHECKBOX
Product marking (Specification B 824)
FORMCHECKBOX
Weldability test
FORMCHECKBOX
Approval of weld procedure and records of repairs
H. Supplementary Requirements:
FORMCHECKBOX
S1 – Referenced documents
FORMCHECKBOX
S2 – Soundness
FORMCHECKBOX
S3 – Pressure test
FORMCHECKBOX
S4 – Weld repair
FORMCHECKBOX
S6 – Product marking I. Preparation for delivery:
S7.1 – Preservation, packaging, and packing is required: FORMDROPDOWN
S7.2 – Marking to be IAW contract marking clauses and this spec
Additional Data Requirements: N/A
Prepared By: Wendell Campbell
Code: 290MP
File details come from the government source that posted it. Updated .