MATERIAL ORDERING DATA - CLIN 0001.doc
DOC document 105 KB Posted
- Attached to
- LOCK RING LATCH
- Solicitation number
- SPMYM2-24-Q-0088
About this file
This document provides material ordering data for copper-nickel alloy castings to be procured under solicitation number SPMYM2-24-Q-0088 for lock ring latches by the Defense Logistics Agency Land and Maritime. The material ordering data specifies 26 castings of copper alloy UNS-designated composition per drawing number 161594 in as-cast condition for ordering under the contract. Optional ordering requirements include pressure testing, witness inspection, certification, foundry test reports, product marking, and weldability testing that may be specified in individual purchase orders. Preservation, packaging, and packing requirements are also specified.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| AMENDED SOLICITATION SPMYM2-24-Q-0088.pdf | ||
| MATERIAL ORDERING DATA - CLIN 0002.doc | DOC document | |
| DRAWINGS.pdf | ||
| SOLICITATION SPMYM2-24-Q-0088.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
MATERIAL ORDERING DATA
ASTM-B-369
IDN: N4523A 3276-9140
ICN: 38MNF72102
KO: S01
KOI: 001
Paragraph 5 Ordering Data
A. ASTM-B-369, STANDARD SPECIFICATION FOR COPPER-NICKEL ALLOY CASTINGS, dated 01 APRIL 2009 (Reapproved 2016).
B. Quantity of castings:26 C. Copper Alloy UNS number (Table 2): FORMDROPDOWN
D. Pattern or drawing number: 161594 Condition (as-cast, machined, and so forth): as cast E. ASME Boiler and Pressure Vessel Code Requirements: FORMDROPDOWN
F. When material is purchased for agencies of the U.S. Government, the Supplementary Requirements of this specification may be specified.
G. The following are optional and should be specified in the purchase order when required:
FORMCHECKBOX
Pressure test or soundness requirements (Specification B 824)
FORMCHECKBOX
Witness inspection (Specification B 824)
FORMCHECKBOX
Certification (Specification B 824)
FORMCHECKBOX
Foundry test report (Specification B 824)
FORMCHECKBOX
Product marking (Specification B 824)
FORMCHECKBOX
Weldability test
FORMCHECKBOX
Approval of weld procedure and records of repairs
H. Supplementary Requirements:
FORMCHECKBOX
S1 – Referenced documents
FORMCHECKBOX
S2 – Soundness
FORMCHECKBOX
S3 – Pressure test
FORMCHECKBOX
S4 – Weld repair
FORMCHECKBOX
S6 – Product marking I. Preparation for delivery:
S7.1 – Preservation, packaging, and packing is required: FORMDROPDOWN
S7.2 – Marking to be IAW contract marking clauses and this spec
Additional Data Requirements: N/A
Prepared By: IWendell Campbell
Code: 290MP
File details come from the government source that posted it. Updated .