Machined MTS Parts Attachement 4 14.pdf
PDF 405 KB Posted
- Attached to
- Test Fixtures Manufacture
- Solicitation number
- N0018320Q0091
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Test Fixture RFQ.pdf | ||
| Machined MTS Parts Attachment 3 4.pdf | ||
| Test Fixtures Manufacture.pdf | ||
| Attachment 1.docx | DOCX document |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Axial Top
Top hole to screw into MTS
Low friction plastic attached to bottom of aluminum/SS base
Bend Top or Bottom (Same part, x2)
Two moveable/removable sliders, with attachment mechanism on top for holding specimens Needs to have distance markings so we can easily measure distance between struts
Picturing a T-slotted part for easy adjustability
Cantilever Roller
Roller contoured to 2.25” or 2.5” diameter tubing
Top will attach to MTS same way as Axial Top, screws on
Cantilever Specimen Holder Base
Cylindrical base to allow for tubing, will need mechanism for securing tubing inside part
Round base for adjustability
Cantilever Specimen Holder
Sliding section for Specimen Holder Base, need mechanism for securing during testing
Through holes for securing to T slots in base
Cantilever Stage
T slots for securing Specimen Holder
Likely around a foot long
Stage
Two holes for securing cross table to stage, internally threaded
Attach directly to MTS base
Torsion 2.5” ID Bottom
Threaded holes for securing specimen in place with screws
Attach to U-Joint
Torsion 4” ID Bottom/Top (will need 1x each) securing specimen in
Torsion 7” ID Top securing specimen in
| Slide Number 1 |
| Slide Number 2 |
| Slide Number 3 |
| Slide Number 4 |
| Slide Number 5 |
| Slide Number 6 |
| Slide Number 7 |
| Slide Number 8 |
| Slide Number 9 |
| Slide Number 10 |
File details come from the government source that posted it. Updated .