RFQ_M67001-18-Q-1314.pdf

PDF 1 MB Posted Aug 23, 2018

Attached to: AUDIO VISUAL EQUIPMENT UPGRADE Federal contract opportunity
Solicitation number: M67001-18-Q-1314
Issued by: United States Marine Corps

About this file

From the source

Solicitation for Audio Visual Equipment Upgrade and Warranty.

View the file

Other files for this federal contract opportunity

Other files attached to AUDIO VISUAL EQUIPMENT UPGRADE, newest first.
File	Type	Posted
M67001-18-Q-1314_Amendment_02.pdf.docx	DOCX document	Sep 11, 2018
M67001-18-Q-1314_Amendment_01.pdf	PDF	Aug 24, 2018

On GovTribe

Work with this file on GovTribe

Download the original file
Contacts named in this file
Similar government files
Ask GovTribe AI about this file

Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

SEE ADDENDUM

(No Collect Calls)

M6700118Q1314 23-Aug-2018

b. TELEPHONE NUMBER

910-451-3018

8. OFFER DUE DATE/LOCAL TIME

10:00 AM 12 Sep 2018

5. SOLICITATION NUMBER 6. SOLICITATION ISSUE DATE

AUTHORIZED FOR LOCAL REPRODUCTION

PREVIOUS EDITION IS NOT USABLE

STANDARD FORM 1449 (REV. 2/2012)

Prescribed by GSA – FAR (48 CFR) 53.212

(TYPE OR PRINT)

(SIGNATURE OF CONTRACTING OFFICER)

ADDENDA X ARE

26. TOTAL AWARD AMOUNT (For Gov t. Use Only )

23.

CODE 10. THIS ACQUISITION IS

SUCH ADDRESS IN OFFER

17b. CHECK IF REMITTANCE IS DIFFERENT AND PUT

BELOW IS CHECKED

TELEPHONE NO.

M67001

9. ISSUED BY

18b. SUBMIT INVOICES TO ADDRESS SHOWN IN BLOCK 18a. UNLESS BLOCK

7. FOR SOLICITATION

INFORMATION CALL:

a. NAME

VIVIAN PORTER

2. CONTRACT NO. 3. AWARD/EFFECTIVE DATE 4. ORDER NUMBER

(TYPE OR PRINT)

30b. NAME AND TITLE OF SIGNER 30c. DATE SIGNED 31b. NAME OF CONTRACTING OFFICER

30a. SIGNATURE OF OFFEROR/CONTRACTOR 31a.UNITED STATES OF AMERICA

27a. SOLICITATION INCORPORATES BY REFERENCE FAR 52.212-1. 52.212-4. FAR 52.212-3. 52.212-5 ARE ATTACHED.

25. ACCOUNTING AND APPROPRIATION DATA

1. REQUISITION NUMBER

20.

ADDITIONAL SHEETS SUBJECT TO THE TERMS AND CONDITIONS SPECIFIED.

OFFEROR TO COMPLETE BLOCKS 12, 17, 23, 24, AND 30

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL ITEMS

M9305518SU00032

ARE NOT ATTACHED

27b. CONTRACT/PURCHASE ORDER INCORPORATES BY REFERENCE FAR 52.212-4. FAR 52.212-5 IS ATTACHED. ADDENDA ARE ARE NOT ATTACHED

(BLOCK 5), INCLUDING ANY ADDITIONS OR CHANGES WHICH ARE

SET FORTH HEREIN, IS ACCEPTED AS TO ITEMS:

. YOUR OFFER ON SOLICITATION

28. CONTRACTOR IS REQUIRED TO SIGN THIS DOCUMENT AND RETURN

% FOR:SET ASIDE:UNRESTRICTED OR X

SMALL BUSINESSX

17a.CONTRACTOR/ CODE FACILITY

OFFEROR CODE

M67001MARINE CORPS FIELD CONTRACTING SYS

ATTN: VIVIAN PORTER

PO BOX 8368

CAMP LEJEUNE NC 28546

18a. PAYMENT WILL BE MADE BY CODE

RATED ORDER UNDER

DPAS (15 CFR 700)

13a. THIS CONTRACT IS A

13b. RATING

CODE15. DELIVER TO CODE M93055 16. ADMINISTERED BY

12. DISCOUNT TERMS11. DELIVERY FOR FOB DESTINA-

TION UNLESS BLOCK IS

MARKED

SEE SCHEDULE

14. METHOD OF SOLICITATION

RFQ IFB RFPX

M93055

CHARLES COLLINGSWORTH

BLDG DD-41 SCHOOL OF INFANTRY

CAMP GEIGER NC 28542

TEL: 910-449-0073 FAX:

910-451-2332FAX:

TEL: 910-451-3018

SERVICE-DISABLED

VETERAN-OWNED

SMALL BUSINESS

8(A)

HUBZONE SMALL

BUSINESS

SIZE STANDARD:

NAICS:

334310

OFFER DATED

29. AWARD OF CONTRACT: REF.

DELIVER ALL ITEMS SET FORTH OR OTHERWISE IDENTIFIED ABOVE AND ON ANY

COPIES TO ISSUING OFFICE. CONTRACTOR AGREES TO FURNISH AND

EMAIL:

TEL:

31c. DATE SIGNED

SEE SCHEDULE

SCHEDULE OF SUPPLIES/ SERVICESITEM NO. QUANTITY UNIT UNIT PRICE AMOUNT

24.22.21.19.

WOMEN-OWNED SMALL BUSINESS (WOSB)

ELIGIBLE UNDER THE WOMEN-OWNED

SMALL BUSINESS PROGRAM

EDWOSB

32g. E-MAIL OF AUTHORIZED GOVERNMENT REPRESENTATIVE

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL ITEMS

(CONTINUED)

PAGE 2 OF60

ACCEPTED, AND CONFORMS TO THE CONTRACT, EXCEPT AS NOTED: ______________________________________________________

32a. QUANTITY IN COLUMN 21 HAS BEEN

RECEIVED INSPECTED

32b. SIGNATURE OF AUTHORIZED GOVERNMENT

REPRESENTATIVE

32c. DATE 32d. PRINTED NAME AND TITLE OF AUTHORIZED GOVERNMENT

REPRESENTATIVE

32e. MAILING ADDRESS OF AUTHORIZED GOVERNMENT REPRESENTATIVE 32f . TELEPHONE NUMBER OF AUTHORIZED GOVERNMENT REPRESENTATIVE

37. CHECK NUMBER

FINALPARTIALCOMPLETE

36. PAYMENT35. AMOUNT VERIFIED

CORRECT FOR

34. VOUCHER NUMBER

FINAL

33. SHIP NUMBER

PARTIAL

38. S/R ACCOUNT NUMBER 39. S/R VOUCHER NUMBER 40. PAID BY

41a. I CERTIFY THIS ACCOUNT IS CORRECT AND PROPER FOR PAYMENT

41b. SIGNATURE AND TITLE OF CERTIFYING OFFICER 41c. DATE

42a. RECEIVED BY (Print)

42b. RECEIVED AT (Location)

42c. DATE REC'D (YY/MM/DD) 42d. TOTAL CONTAINERS

STANDARD FORM 1449 (REV. 2/2012) BACK

Prescribed by GSA – FAR (48 CFR) 53.212

AUTHORIZED FOR LOCAL REPRODUCTION

PREVIOUS EDITION IS NOT USABLE

SEE SCHEDULE

20.

SCHEDULE OF SUPPLIES/ SERVICES

21.

QUANTITY UNIT

22. 23.

UNIT PRICE

24.

AMOUNT

19.

ITEM NO.

M6700118Q1314

Section SF 1449 - CONTINUATION SHEET

PERFORMANCE WORK STATEMENT

FOR

SCHOOL OF INFANTRY EAST

DD-41 AUDITORIUM AUDIO/VISUAL EQUIPMENT UPGRADE

1.0 BACKGROUND. Information Systems Coordinator (ISC), School of Infantry East (SOI-EAST), Camp

Geiger, North Carolina has a requirement to upgrade existing audio visual (A/V) equipment in Building DD-41

Auditorium aboard Camp Geiger (Camp Devil Dog), North Carolina.

2.0 CONTRACT OBJECTIVE. The objective is for the contractor to remove the existing A/V equipment from Building DD-41 Auditorium aboard Camp Geiger (Camp Devil Dog), provide and install new A/V equipment, and provide a five (5) year maintenance and service agreement in accordance with this Performance Work Statement

(PWS).

3.0 PLACE OF PERFORMANCE. Place of performance is Building DD-41, Perimeter Road, aboard Camp

Geiger (Camp Devil Dog), North Carolina.

4.0 PERIOD OF PERFORMANCE.

BASE YEAR: MAR 29, 2019 – MAR 28, 2020 __________________ CLIN 0001

OPTION YEAR ONE MAR 29, 2020 – MAR 28, 2021 __________________ CLIN 1001

OPTION YEAR TWO MAR 29, 2021 – MAR 28, 2022 __________________ CLIN 2001

OPTION YEAR THREE MAR 29, 2022 – MAR 28, 2023 __________________ CLIN 3001

OPTION YEAR FOUR MAR 29, 2023 – MAR 28, 2024 __________________ CLIN 4001

AGGREGATE AMOUNT OF CONTRACT ________________________

4.1 Removal and Installation. To be determined based upon the contact award, and auditorium use schedule.

Contractor shall contact the Government’s representative upon receipt of award in order to coordinate the removal and installation of equipment. Removal and installation shall take no longer than one week and be complete no later than sixty (60) days after contract award. All installed equipment and labor shall be warrantied for a period of five

(5) years.

4.1.1 Removal of Existing A/V Equipment. The contractor shall remove the existing Government owned A/V equipment in the building DD-41 Auditorium and deliver the items to the Government’s Point of Contact for the

Marine Combat Training Battalion at building TC-1026 aboard Camp Geiger.

4.2 Installation of New A/V Equipment. The contractor shall provide and install new A/V equipment meeting the minimum requirements of this PWS. The contractor shall conduct a function check on all installed A/V components to ensure proper function and operation.

4.2.1 Equipment to be installed in Building DD-41. The prevision 52.211-6 Brand Name or Equal from the

Federal Acquisition Regulation (FAR) applies. “Equal” items must meet the following salient physical, functional, or performance characteristics of the brand name item in order to be acceptable for award:

5.0 REQUIREMENT

5.1 On-Site Lead. The contractor shall provide an on-site lead installer to interact with the Government’s representative to coordinate scheduling, access, receiving, storage, and handling of all materials.

5.2 Equipment and Materials. The contractor shall provide qaulified personnel, supervision, supplies, materials, parts, components, equipment, tools, and transportation necessary to upgrade the existing Government owned A/V system.

5.3 Hours of Removal and Installation. All work shall occur between the hours of 7:00 AM and 4:00 PM

Eastern Time Monday thru Friday excluding Federal holidays.

5.4 Job Site. The contractor shall be responsible for cleaning the installation area and disposing of all trash and materials to the satisfaction of the Government’s representative or designated inspectors before completion of each work day and upon completion of the project. At the end of the project, the contractor shall restore any disturbed or damaged areas at the direction of the Contracting Officer.

5.5 Final Inspection. After installation is complete the contractor shall test all equipment, ensure it is working property and as intended, and demonstrate the proper operation of the system to the Government’s representative.

All equipment documentation, any installation media, copies of any required equipment application coding, equipment log in names and passwords will be provided to the SOI-EAST Information Systems Coordinator.

5.6 Warranty. The contractor shall warrant all of the installed equipment and labor for a period of five (5) years.

5.7 Maintenance and Support.

5.7.1 Maintenance Service. The contractor shall conduct scheduled A/V equipment inspection, cleaning and function testing every month. Equipment inspection will consist of visually inspecting all equipment for damage and to ensure all components are properly wired and powered. Equipment cleaning will consist of physically cleaning all audio visual equipment to include the podiums. All equipment to include all filters will be cleaned internally with canned compressed air to remove all dust and particles. All equipment surfaces will be cleaned in accordance with manufacturer recommendations. All podiums will be cleaned inside and out. Function testing will consist of ensuring all audio and visual components are properly working and functioning as designed with the system. The contractor shall provide maintenance and support for a base period of one year with four (4) one-year option periods.

5.7.2 Emergency Maintenance. The contractor shall be on-site to repair malfunctioning and/or non-functioning equipment within four (4) business hours of being notified.

6.0 GOVERNMENT POINT OF CONTACT. To be provided at time of contract award.

6.1 Government’s Representative:

6.2 Contract Administrator:

7.0 CONTRACTOR UNAUTHORIZED WORK PERFORMANCE. The Contractor shall not perform work that deviates from contract requirements and specifications. If the Contractor deviates from contract requirements and specifications without approval of the CONTRACTING OFFICER, such deviation shall be at the risk of the Contractor and any cost related thereto shall be borne by the Contractor.

8.0 RESPONSIBILITY. The Government will not be responsible in any way for the Contractor's personal supplies, equipment, materials, or belongings brought onto the grounds to perform services. This includes, but is not limited to loss or damage caused by fire, theft, hurricane, accident or other disaster.

QTY PART NUMBER ITEM DESCRIPTION

2 V11H735020

EPSON PRO L1100U, LASER PROJECTOR, WUXGA,

6000 LUMENS

“Brand Name or Equal”

Projection System High-aperture 3LCD,3-chip technology

Projection Method Front/rear/ceiling mount

Driving Method Poly-silicon TFT Active Matrix

Pixel Number 2,304,000 dots (1920 x 1200) x 3

Native Resolution 1920 x 1200 (WUXGA)

Resize 640 x 480, 800 x 600, 1280 x 1024, 1400 x 1050

Aspect Ratio Supports 4:3, 16:9, 16:10

Pixel Arrangement Cross stripe

Color Brightness1 Color Light Output: 6,000 lumens

White Brightness1 White Light Output: 6,000 lumens

Contrast Ratio 2,500,000:1 Absolute Black Full White 6,000 lm / Full Black 0 lm)

Brightness Uniformity (typical) 90%

Color Reproduction Up to 1 billion colors

Size (projected distance) 50" – 300"

Lens Shift Vertical: ±67%; horizontal: ±30%

Keystone Correction Vertical: ±45 degrees; horizontal: ±30 degrees

Illumination Technology Laser Phosphor

Light Source Life3 (Normal) 20,000 hours

Interfaces:

DVI-D x 1, HDMI x 1, HDBaseT x 1, 5-BNC, VGA x 1, Audio in: Mini Stereo x 3, Variable audio out: Mini Stereo x 1, USB connector Type B x 1: For service only, USB connector Type

A x 1: For wireless only, Monitor out: Mini D-sub 15 pin x 1, Serial: RS-232c x 1

1 94160

DA-LITE CUSTOM LACE & GROMMET FRAME KIT

1 35431

DA-LITE CUSTOM LACE & GROMMET SCREEN 360”

X128.75”

DUALHD2GO -

ANALOG

MATROX SCREEN EXTENDER BOX

Supported Operating Systems: Microsoft Windows 10, Windows 7. Supports Clone Mode, Stretched Desktop

Mode, Power Desk Software and Multi-Unit Support.

2 V11H543120

EPSON 4855WU WUXGA PROJECTOR

Projection System: High-aperture 3-chip 3LCD technology

Projection Method: Front/ rear/ ceiling mount

Driving Method: Poly-silicon TFT Active Matrix

Pixel Number: 2,304,000 pixel (1920 x 1200) x 3

Color Brightness - Color Light Output: 4000 lumens

White Brightness - White Light Output: 4000 lumens

Aspect Ratio: Supports 4:3, 16:9, 16:10

Native Resolution: 1920 x 1200 (WUXGA)

Resize: 640 X 480, 800 X 600, 1280 X 1024, 1400 X 1050

Lamp Type: 260 UHE

Lamp Life: Normal mode: Up to 4000 hours, ECO mode:

Up to 5000 hours

Brightness Uniformity: 90%

Pixel Arrangement: Cross stripe

Throw Ratio Range: 1.26-2.30

Size - projected distance: 50"-300"

Keystone Correction: Horizontal: ±30 degrees, Vertical:

±30 degrees.

Contrast Ratio: High Brightness, Dynamic mode:

5000:1Color Processing: 10 bit

Color Reproduction: Up to 1.07 billion colors

Standard Connectivity: RS-232C, Ethernet interface (100

Base-TX/10 Base-T), VGA input, VGA output, HDMI input, screen port, composite input, BNC input, S-Video input, Stereo mini-jack audio output, Stereo mini-jack (4x) audio input, Cinch audio input.

2 DAL-70281L

DALITE LARGE COSMOPOLITAN ELECTROL

110'X176"

-Wall or Ceiling mountable

-Seamless 16’ X 16’ Screen

-Decora-style, three-position wall switch.

-Seamless surfaces

-Low-Voltage Controlled

-White powder-coated aluminum finish.

1 ULX124/85-G3

SHURE PROSOUND ULX WIRELESS SYSTEM WITH

BELTPACK TRANSMITTER AND HANDHELD

TRANSMITTER (SM58 MICROPHONE)

Receiver

- Minimum RF Range: 470-952 MHz

- Minimum Working Range: 300 feet

- Minimum Audio Frequency Range: 25-15,000 Hz, +2 dB

- Minimum Audio Output Level: XLR connector (into 600Ω load): +8 dBV (line); -10 dBV (mic) 1/4-inch connector

- Minimum Impedance: 3kΩ(1/4-inch phone jack)

20kΩ(XLR Line) 500Ω(XLR Mic)

- Minimum Modulation: +38 kHz deviation compressor-expander system with pre- and de-emphasis

- Minimum Dynamic Range: >105 dB, A-weighted.

- Minimum RF Sensitivity: 1.26 mV for 12 dB SINAD

- Minimum Image Rejection: 65 dB

- Minimum Spurious Rejection: 75 dB

- Minimum System Distortion: 0.3% (<1%) THD

Body Pack Transmitter

- Minimum gain adjustment: 40 dB

- Minimum Impedance: input: 1 MΩ

- Minimum Power Output: 30 mW maximum.

- Compatible with receiver.

Handheld Transmitter

- Minimum Grain Adjustment Range: 25 dB

- Minimum RF Power Output: 30 mW maximum

- Compatible with receiver.

1 MX150B/O-TQG

SHURE OMNIDIRECTIONAL LAVALIER

MICROPHONE

- Minimum Frequency Response: 20 Hz – 20 kHz

- Minimum Sensitivity: 7.0 mV/Pascal

- Minimum Equivalent Acoustic Noise: 24 dBA SPL

- Minimum overload sound level: 120 dB SPL

- Minimum operating current: 500 μA

- Compatible with receiver and battery pack.

1 WCE2LT

SHURE COUNTRYMAN HEADSET MICROPHONE

- Minimum Frequency Response: 20 Hz – 20 kHz

- Minimum Sensitivity: 3.0 mV/Pascal

- Compatible with receiver and battery pack.

1 MX418-SE/S

SHURE PODIUM MICROPHONE

- 18 inch gooseneck.

- Must have mute switch and LED

- Minimum Frequency Response: 50 to 17,000 Hz

- Minimum Output Impedance: (at 1000 Hz)

Rated at 150 Ω (180 Ω actual)

- Minimum Open Circuit Sensitivity (at 1 kHz, ref. 1

V/Pascal)

Cardioid: –35.0 dB (17.8 mV)

Supercardioid: –33.5 dB (21.1 mV)

Omnidirectional: –27.5 dB (42.2 mV)

- Minimum Maximum SPL (1 kHz at 1% THD, 1 kΩ load)

Cardioid: 124.2 dB

Supercardioid: 122.7 dB

Omnidirectional: 116.7 dB

- Minimum Equivalent Output Noise (A-weighted)

Cardioid: 28.0 dB SPL

Supercardioid: 26.5 dB SPL

Omnidirectional: 20.5 dB SPL

- Minimum Signal to Noise Ratio (referenced at 94 dB SPL)

Cardioid: 66.0 dB

Supercardioid: 67.5 dB

Omnidirectional: 73.5 dB

- Minimum Dynamic Range at 1 kΩ Load

96.2 dB

100 dB at 0 gain

- Minimum Common Mode Rejection

45.0 dB minimum

- Minimum Mute Switch Attenuation (switched models only)

50.0 dB minimum

- Minimum Preamplifier Output Clipping Level (1% THD)

–6.0 dBV (0.5 V)

–12 dB at 0 gain

- Minimum Polarity

Positive sound pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output connector.

- Compatible with receiver.

2 V2-26B

COMMUNITY V2-26B COMPACT 2-WAY FULL RANGE

LOUDSPEAKER

- Minimum Operating Range: 70 Hz to 18 kHz (-10 dB)

- Minimum Frequency Response: 90 Hz to 16 kHz (±3 dB)

- Minimum Max Input Ratings: 200W continuous, 500W program 28.3 volts RMS, 56.7 volts momentary peak

- Minimum Sensitivity (1W/1m): 92 dB (100 Hz to 12.5 kHz) free space

- Minimum Maximum Output: 115 dB SPL / 121 dB SPL

(peak)

- Minimum Nominal Impedance: 4 ohms

- Minimum Impedance: 3.5 ohms @ 220 Hz

- Minimum Nominal –6dB Beamwidth: 90° H x 70° V (in vertical position)

- Minimum Crossover Frequency: 1.3 kHz

- Minimum Input Connection: NL4-compatible locking connector with terminal strip in parallel

- Wall mountable with mount.

12 CONTROL 28

JBL CONTROL 28 WALL MOUNT SPEAKER

- Minimum Frequency Range (-10 dB)1: 60 Hz to 16 kHz

- Minimum Continuous Program:Power Capacity2: 175

Watts

- Minimum Sensitivity3: 92 dB SPL, 1W, 1m

- Minimum Directivity Factor (Q): 7.5

- Minimum Directivity Index (DI): 8.8

- Minimum Nominal Impedance: 8 ohms

- Minimum Crossover Frequency: 2.8 kHz

- Minimum Overload Protection: Full-Range power limiting to protect network and transducers

- Termination: Spring terminals, accepts banana plug

- Wall mountable with mount.

1 910-151-881

CLEARONE CONVERGE PRO 880T

Audio Performance

-Conditions: Unless otherwise specified, all measurements are performed with a 20 Hz to 22 kHz BW limit (no weighting)

-Frequency Response: 20 Hz to 22 kHz ±1dB

-Noise (EIN): -126 dBu, 22 kHz BW, max gain, -Rs=150 Ω

-THD+N: <0.02%

-Dynamic Range: >100 dB (non A-weighted)

-Crosstalk <-91 dB re 20 dBu @ 20 kHz channel to channel

Auto Mixer Features

-Number of Open Microphones (NOM), PA Adaptive Mode, -

First Mic Priority Mode, Last Mic Mode, Maximum # of Mics

Mode, Ambient Level, Gate Threshold Adjust, Off

Attenuation Adjust, Hold Time, Decay Rate

Matrix Mixing Features

37x38 matrix, 12 analog in/out, 12 expansion bus in/out, 8 assignable processing blocks in/out, 4 assignable fader blocks in/out, 1 10W speaker amplifier, 1 telco input/1 telco output

Assignable Processing Blocks

FiltersAll pass, Low pass, High pass, Low shelving, High shelving, Parametric EQ, Notch, CD Horn, CrossoversBessel, Butterworth, Linkwitz-Riley, Compressor, Delay; adjustable up to 250 ms

Microphone Input Configuration

Input Gain Adjust, Mic or Line Level, Phantom Power on/off, Echo Cancellation on/off, Noise Cancellation on/off, FiltersAll

Pass, Low Pass, High Pass, Notch, PEQ, Mute on/off, Chairman Override on/off, AGC on/off, Automatic Level

Control on/off, Auto Gate/Manual gate, Adaptive Ambient on/off, Pre AEC channel

Mic/Line Inputs 1-8

Push-on mini-terminal block, balanced, bridging, Impedance:

< 10 KΩ, Nominal Level: adjustable -56 dBu to 0 dBu (7 dB step coarse gain adjustment), Maximum Level: -65 dBu to

+20 dBu, Echo Cancellation: 130 ms tail time (works with 12 dB of room gain), Noise Cancellation: 6–15 dB attenuation, Phantom Power: 24 V, selectable

Line Inputs 9-12

Push-on mini-terminal block, balanced, bridging, Impedance:

< 10 KΩ, vNominal Level: 0 dBu, Maximum Level: 20 dBu

Outputs 1-12

Push-on mini-terminal block, balanced, Impedance: < 50 Ω, Nominal Level: 0 dBu, Maximum Level: 20 dBu

Amplifier Output

Binding Post Connection, 10 Watts @ 4 Ω Impedance, THD +

Noise: < 0.5%

1 NX2200

AMX CONTROLLER

ACTIVE POWER REQUIREMENTS

- Voltage, DC (typical) - 12 VDC

- DC Current Draw - 250 mA @ 12 VDC

- Voltage DC Range - 9 - 18 VDC

- Power Connector - 3.5mm Phoenix with retaining screws

ONBOARD MASTER

- Processor - 1600 MIPS

- Program Port - (1) USB Standard B

- Configuration Dip Switch - 4-position

- USB Host Port - (2) USB Standard A, one on front and one on back, USB Host port supports Solid State drive for upgrading firmware, loading code files, copying configuration data and remote storage.

MEMORY: NVRAM - 1 MB, Memory Card - 8 GB SD, DDRAM - 512 MB

ETHERNET

- Connection - (1) RJ-45 (10/100 Port RJ-45 connector provides TCP/IP communication. Auto MDI/MDI-X enabled.

Supports IPv4 and IPv6 networks. Supports HTTP, HTTPS, Telnet, FTP).

ICSLan

- ICSLan Connection - 1) RJ-45, 10/100 Port RJ-45 connector.

Auto

MDI/MDI-X enabled. Supports IPv4 and IPv6 networks.

Supports HTTP, HTTPS, Telnet, FTP

CONTROL PORTS

- AxLink Port - (1) 4-position 3.5mm Screw Terminal, provides data and power to external AxLink control devices

- RS-232/422/485 Port - (1) 10-position 3.5mm

Screw Terminal NetLinx Port 1 XON/XOFF

(transmit on / transmit off) CTS/RTS (clear to send/ready to send) 300 - 115,200 baud.

- RS-232 Port - (3) 5-position 3.5mm Screw

Terminal NetLinx Port 2-4 XON/XOFF

(transmit on / transmit off) CTS/RTS (clear to send/ready to send) 300 - 115,200 baud.

- IR/Serial - (4) 2-position 3.5mm Screw

Terminal 4 IR Transmit / 1-way Serial ports

NetLinx Ports 11-14

Support high-frequency carriers up to 1.142

MHz 4 IR/Serial data signals can be generated simultaneously

- I/O Channels - (4) One 6-position 3.5mm Screw Terminal 4-channel binary I/O port for contact closure with each input being capable of voltage sensing

NetLinx Port 22 Channels 1-4.

-Relays - (4) LEDs (red) indicate when each of the relay channels (1-4) are active (closed).

1 EXB-REL8

AMX RELAY

- Power - PoE Powered – No local Power Supply needed

Typical power draw: 1.9 Watts

Max power draw: 3.4 Watts

- Operation - 8 relays, 1A @ 24VAC / 28VDC

- Connections / Wiring - 1 RJ-45 ICS-LAN Ethernet

Connector, 2 8-Pin 3.5mm captive-screw terminals

1 CDI4000

CROWN AUDIO AMPLIFIER 2CH, 1200W

- Minimum Output Power:

2 ohm Dual (per channel) - 1,600W

4 ohm Dual (per channel) - 1,200W

8 ohm Dual (per channel) - 650W

4 ohm Bridge-Mono - 3,200W

70V Dual (per channel) - 1,000W

100V Dual (per channel) - 1,000W

140V Bridge-Mono - 2,000W

- Minimum Voltage Gain at 1kHz: 34.2 dB

- Minimum Frequency Response: +0/–1 dB from 20 Hz to

20 kHz at 1 watt into 4 ohms.

- Minimum Sensitivity At 8 ohm rated output: 1.4V

- Minimum Sensitivity At 4 ohm rated output: 1.3V

- Minimum Sensitivity At 2 ohm rated output: 1.0V

- Minimum Signal to Noise Ratio (below rated 8-ohm power at 1 kHz): 100 dB (A weighted).

- Minimum Damping Factor: Better than 500 from 20 Hz to 400 Hz.

- Minimum Crosstalk: > 70 dB below rated power, 20 Hz to

1 kHz, A-weighted.

- Minimum Input Stage: Input is electronically balanced and employs precision 1% resistors.

- Minimum Impedance (Nominal): 20 k ohms, balanced;

10 k ohms, unbalanced.

- Minimum Maximum Input Signal: +22 dBu typical.

- Minimum Input EQ: 6 parametric filters per channel with adjustable Q, ±15 dB boost/cut.

- Minimum Crossover Filters: Highpass and lowpass per channel. Butterworth 6/12/18/24 dB per octave, Linkwitz-Riley 24/48 dB per octave.

- Minimum Output EQ: 8 parametric filters per channel with adjustable Q, ±15 dB boost/cut.

1 DC-12

EPSON DC-12 DOCUMENT CAMERA

- GENERAL - Resolution: Auto-select

SXGA/XGA/WXGA/HD/1080p; Lens: F=2; 12" x 17" capture area makes it easy to display two full pages; Camera rotates 90 degrees vertically and horizontally, so it can also be used as a webcam to capture classroom activities or for video conferencing; Recording audio with video is a snap with the

DC-12's built-in microphone - create lessons for flipped classrooms or re-watch lessons later as a helpful review;

Built-in SD card slot.

- DIGITAL ZOOM – 16X

- Image Sensor Type – 1.29” CMOS

- Input Voltage - 110 V AC; 220 V AC; 12 V DC

- Interfaces/Ports - 1 x Microphone; 1 x Type A USB; 1 x

VGA Out; 1 x HDMI - Output; 1 x Composite Video Out; 1 x

Type B USB

- Iris – Auto

- Resolution – 2 Megapixel.

- Video System – NTSC; PAL

1 E221N-BK

NEC 22” MONITOR

Panel Technology: AH-IPS

Backlight Type: White LED

Viewable Image Size: 21.5"

Aspect Ratio: 16:9

Native Resolution: 1920x1080

Pixels Per Inch: 102.4 PPI

Contrast Ratio (typical): 1000:1

Viewing Angle (typical): 178° Vert., 178° Hor.

Response Time (typical): 6ms

Displayable Colors: 16.8 million

Input Connectors: DisplayPort 1.1a, HDMI 1.4, VGA, analog audio

Output Connectors: Headphone audio

1 DGX ENC 16

AMX DGX 16X16 SWITCH

GENERAL

- AC Power - 100-240 VAC single phase, 50-60 Hz

- Power Consumption (Max) - 930 Watts, with redundancy

1760 Watts, without redundancy

- BTU/HR (Max) - 3173, with redundancy, 6005, without redundancy.

- Rack Units – 4

- Per Channel Aggregate Data Rate (Max) – 12.8 Gbps

INTEGRATED CONTROLLER

- ICS LAN/Ethernet Port - NetLinx On Board Master is an

NI-3100 Class Controller TCP/IP Uplink Port (LAN

10/100/1000).

- Processor - CPU 404 MIPS PowerPC.

- ICS LAN/Ethernet Port - Supports up to 64-Port

Unmanaged 10/100 Ethernet Switch, Static IP or DHCP/DNS, SSL, Auto-negotiating, Half/Full duplex, Auto MDI/MDI-X

Cross-Over TCP/IP, UDP/IP, CIP, SMTP, SNMP, Built-in

Web server Includes support for DXLink, RJ-45 Connector

- Program Port (USB) - USB Mini-AB (used for NetLinx

Studio control).

ENCLOSURE CONTROL

- Control Port (Serial) - Bidirectional RS-232, Baud Rates of

9600 (default), 19200, 38400, 57600

- Control Port (USB) - USB Mini-B

- ENC LINK Ports - AutoPatch Link Ports, Ethernet (10/100), RJ-45 Connector

3 DGX-0-DXL

AMX - OUTPUT DXLINXK CARD

SIGNAL TRANSPORT – DXLink w/HDCP

- Compatible Formats: HDMI Video / Audio / Ethernet / USB

(HID) / Power and Control

- Signal Type Support: DXLink Twisted Pair

- Connectors: (4) RJ-45 Ports

- Transport Layer Throughput (Max): 10.2 Gbps

- Twisted Pair Cable Type: Shielded Cat6, Cat6A and Cat7

- Twisted Pair Cable Length: Up to 328 ft (100 m)

- Video Data Rate (Max): 4.95 Gbps / 6.75 Gbps, 6.75 Gbps supported when the HDMI Output Board Scaler or DXLink

HDMI Rx Scaler is in Bypass mode and format is 1080p60 or less

- Video Pixel Clock (Max): 165 MHz / 225 MHz, 225 MHz supported when the HDMI Output Board Scaler or DXLink

HDMI Rx Scaler is in Bypass mode and format is 1080p60 or less.

- Progressive Resolution Support: 480p up to 1920x1200 @ 60

- Deep Color Support: 24-bit, 30-bit, 36-bit, 30-bit, 36-bit supported when the HDMI Output Board Scaler or DXLink

HDMI Rx Scaler is in Bypass mode and format is 1080p60 or less

Color Space Support: RGB 4:4:4, YCbCr 4:4:4 and 4:2:2, Input signal support for YCbCr 4:4:4 and 4:2:2, output color-space is converted to RGB 4:4:4

- 3D Format Support: Yes (HDMI Primary Formats, when used with DXLink Output Boards and the DXLink HDMI

RX Scaler is in bypass mode), Frame Packing 1080p up to 24

Hz, Frame Packing 720p up to 50/60 Hz, Frame Packing

1080i up to 50/60 Hz, Top-Bottom 1080p up to 24 Hz, Top-

Bottom 720p up to 50/60 Hz.

- Audio Format Support: Dolby TrueHD, Dolby Digital, DTS-

HD Master Audio, DTS, 2 CH through 8 CH L-PCM, Dolby

Digital and DTS support up to 48 kHz, 5.1 channels

- Audio Resolution: 16 bit to 24 bit

-Audio Sample Rate: 32 kHz, 44.1 kHz, 48 kHz, 96 kHz, 192 kHz

-Local Audio Support: Yes, Insertion and/or Extraction of 2

CH L-PCM selectable by channel when used in conjunction with Enova DGX Audio Insert / Extract Board

- HDCP Support: Dolby TrueHD, Dolby Digital, DTS-HD

Master Audio, DTS, 2 CH through 8 CH L-PCM, Dolby

Digital and DTS support up to 48 kHz, 5.1 channels.

1 DGX-AIE

AMX - AUDIO EXTRACTION CARD

ANALOG AUDIO - AUDIO INSERTION

- Audio Signal Type: Analog Stereo, up to 16 channels per enclosure

-Analog Input Level (Max): +3 dBu, unbalanced

-Input Impedance: 10k Ω

-Analog to Digital Conversion: 48 kHz Sample Rate, 24-bit

-Analog to Digital Reference Level: +3 dBu = 0 dBfs

-Optimal Analog Audio Operating Range: -30 dBu to +2 dBu

-Input Connectors: 8 pluggable, dual three-position, terminal blocks each containing two single-ended stereo contacts

(supports 28 to 18 AWG)

ANALOG AUDIO - AUDIO EXTRACTION

- Audio Signal Type: Analog Stereo, up to 16 channels per enclosure

- Analog Output Level (Max): +2.8 dBu, unbalanced.

- Output Impedance Drive: >= 5k Ω

- Output Frequency Response: <± 0.3 dB, 20 Hz to 20 kHz

- Audio Output THD+N: <0.04%, 1 kHz, -10dBu to +2.8dBu

- Audio Out SNR: >95 dB, 20 Hz to 20 kHz Vin=+3dBu

- Digital to Analog Resolution: 24 bit, 2 Channel

- Digital to Analog Reference Level: 0 dBfs = +3 dBu

- Optimal Digital Audio Operating Range: -30 dBfs to -2 dBfs

- Audio Synchronization: TBA

- Output Connectors: 8 pluggable, dual three-position, terminal blocks each containing two single-ended stereo contacts (supports 28 to 18 AWG)

2 DGX-I-DXL

AMX DXLINK INPUT CARD

Signal Transport – DXLink w/HDCP

- Compatible Formats: HDMI Video / Audio / Ethernet / USB

(HID) / Power and Control

- Signal Type Support: DXLink Twisted Pair

- DXLink Twisted Pair Power:The DXLink Twisted Pair

Input Board provides Power over DXLink, DXLink Multi-

Format Wallplate Transmitters require a DXLink Power sourcing device, DXLink Transmitter Modules can be powered via DXLink Power or desktop power supply with power cord

- Connectors: (4) RJ-45 Ports

- Transport Layer Throughput (Max): 10.2 Gbps

- Twisted Pair Cable Length: Up to 328 ft (100 m)

- Video Data Rate (Max): 4.95 Gbps / 6.75 Gbps, 6.75 Gbps supported when the HDMI Output Board Scaler or DXLink

HDMI RX Scaler is in Bypass mode and format is 1080p60 or less

- Video Pixel Clock (Max): 165 MHz / 225 MHz, 225 MHz supported when the HDMI Output Board Scaler or DXLink

HDMI RX Scaler is in Bypass mode and format is 1080p60 or less

- Progressive Resolution Support: 480p up to 1920x1200 @ 60

- Interlaced Resolution Support: 480i, 576i, 1080i

- Deep Color Support: 24-bit, 30-bit, 36-bit, 30-bit, 36-bit supported when the HDMI Output Board Scaler or DXLink

HDMI RX Scaler is in Bypass mode and format is 1080p60 or less

- Color Space Support: RGB 4:4:4, YCbCr 4:4:4 and 4:2:2, Input signal support for YCbCr 4:4:4 and 4:2:2, output color-space is converted to RGB 4:4:4

- 3D Format Support: Yes (HDMI Primary Formats, when used with DXLink Output Boards and the DXLink HDMI

RX Scaler is in bypass mode): Frame Packing 1080p up to 24

Hz, Frame Packing 720p up to 50/60 Hz, Frame Packing

1080i up to 50/60 Hz, Top-Bottom 1080p up to 24 Hz, Top-

Bottom 720p up to 50/60 Hz, Side-by-Side Half 1080i up to

50/60 Hz

- Audio Format Support: Dolby TrueHD, Dolby Digital, DTS-

HD Master Audio, DTS, 2 CH through 8 CH L-PCM, Dolby

Digital and DTS support up to 48 kHz, 5.1 channels

- Audio Resolution: 16 bit to 24 bit

- Audio Sample Rate: 32 kHz, 44.1 kHz, 48 kHz, 96 kHz, 192 kHz

- HDCP Support: Yes, full matrix HDCP support (includes any input to any or all outputs), Key Management System, AMX HDCP InstaGate Pro Technology, Key support up to 16 devices per output, independent of source device.

1 MST-701

AMX MODERO 7" TOUCH PANEL

- Power PoE (Power over Ethernet, 802.3af, class 2

- Programmable to match the currently installed AMX touch panel.

- Program control to operate all projectors, projector screens, audio speakers, microphones, ceiling mounted camera and document camera separately.

- Mount to podium.

1 MXA-STMK-701

AMX MODERO TOUCH PANEL - TABLE TOP MOUNT

- Compatible with Tabletop Touch Panel.

- Mount to Podium.

1 NXA-ENET-2POE

AMX ETHERNET POE SWITCH

10 DX-RX

AMX DX-RX HDMI DX-LINK RECEIVER

DXLINK

- Transport Layer Throughput (Max): 10.2 Gbps

- Twisted Pair Cable Type: Shielded Cat6, Cat6A and Cat7,

- Twisted Pair Cable Length: Up to 328 ft (100 m)

ACTIVE POWER REQUIREMENTS

- AC Power: 100-240 VAC single phase, 50-60 Hz, 0.6 A @

115 VAC max

- Power Consumption (Max): Local 12V supplied: 18 W

Power over DXLink supplied: 15 W

- Power Connector: 2.1 mm DC Power Jack (local power)

Included on DXLink Connection (Power over DXLink)

POWER SUPPLY

- External, Included: Each HDMI RX ships with a desktop power supply with power cord.

FRONT CONNECTORS

- Advanced Configuration Interface : USB Mini-B Connector

BACK CONNECTORS

- Local Power: 2.1 mm DC Power Jack, DXLink Input: RJ-

45, ICSLAN/Ethernet Port: RJ-45 Connector, TCP/IP Port

(ICSLAN 10/100), Serial: 3.5mm Pluggable Phoenix Terminal

Block, Bidirectional RS-232, Standard NetLinx Baudrate

1200-115k, Parity support Odd/Even/None

-IR Control: Port for use with IR03 Receiver (Optional

Accessory FG-IR03), Port for use with CC-NIRC Emitter

(Optional Accessory FG10-000-11)

- USB (HID) Keyboard & Mouse: USB Type B Connector

- HDMI Output: HDMI Type A Female

- Analog Stereo Output: 3.5mm Mini-Stereo Jack

CONTROLS

- Advanced Configuration Interface: USB Mini-B Connector

HDMI

- Compatible Formats: HDMI, HDCP, DVI

- Signal Type Support: HDMI, DVI-D (Single Link with

HDMI Cable Adapter)

- Input Signal Type: DXLink from any of the following:

DXLink HDMI Transmitter Module, DXLink Multi-Format

Transmitter Module, DXLink Multi-Format Transmitter

Wallplate,

- Output Signal Type: HDMI, DVI-D

- Output Scaling: SmartScale or Manual Configuration or

Bypass

- SmartScale Output Resolution Support: All resolutions between 480p and 1920 x 1200 @ 60 Hz via automatic

SmartScale query of the display's declared EDID Detailed

Timing Definition

- Output Nominal Voltage: 1.0 Vpp Differential

Output Re-clocking: Yes

- +5V DDC Pin Output: 50 mA when using Enova DXLink

Power, 500 mA when using local 12V supply

- +5V USB Output: 150 mA when using Enova DXLink

Power, 500 mA when using local 12V supply

- Output Rise Time / Fall Time: 425 ps typ (20% - 80%)

- Propagation Delay (Typ): 25 ms when scaling, 5 us when in bypass mode

- HDMI Audio Synchronization: Video Formats @ 60Hz frame rate: Audio is actively delayed to match video within 9 ms leading to 10 ms lagging when scaling. When in bypass mode the audio is matched to video within 1 ms.

- Data Rate (Max): 4.95 Gbps / 6.75 Gbps, 6.75 Gbps supported when the HDMI DXLink RX Scaler is in Bypass mode and format is 1080p60 or less

- Pixel Clock (Max): 165 MHz / 225 MHz, 225 MHz supported when the HDMI DXLink RX Scaler is in Bypass mode and format is 1080p60 or less

- Progressive Resolution Support: 480p up to 1920x1200 @ 60

Hz ) including but not limited to those resolutions show in the

DXLink Twisted Pair Transmitters/Receiver Instruction

Manual

- Deep Color Support: 24-bit, 30-bit, 36-bit, 30-bit and 36-bit supported when the HDMI DXLink RX Scaler is in Bypass mode and format is 1080p60 or less

- Color Space Support: RGB 4:4:4, YCbCr 4:4:4 and 4:2:2, Input signal support for YCbCr 4:4:4 and 4:2:2, output color-space is converted to RGB 4:4:4

- Audio Format Support: Dolby TrueHD, Dolby Digital, DTS-

HD Master Audio DTS, 2 CH L PCM, 6 CH L-PCM, 8 CH L-

PCM, Dolby Digital and DTS support up to 48kHz, 5.1 channels.

- Audio Resolution: 16 bit to 24 bit

- Audio Sample Rate: 32 kHz, 44.1 kHz, 48 kHz, 96 kHz, 192kHz

5 DX-TX

AMX DX-TX DX-LINK MUTI FORMAT TRANSMITTER

ADVANCED CONFIGURATION INTERFACE

- USB Mini-B Connector

TRANSPORT LAYER THROUGHPUT (MAX)

- 10.2 Gbps

TWISTED PAIR CABLE LENGTH

- Up to 328 ft (100 m)

ACTIVE POWER REQUREMENTS

- AC Power: 100-240 VAC single phase, 50-60 Hz,

0.6 A @ 115 VAC max

- Power Consumption (Max) Local 12V supplied: 9 W, Power over DXLink supplied: 10 W

FRONT CONNECTORS Advanced Configuration Interface:

USB Mini-B Connector

BACK CONNECTORS

-Video Input: HD-15 (RGBHV, RGBs, RGsB, Y/Pb/Pr, Y/c /

S-Video, composite – breakout cable is required for non

RGBHV formats)

-HDMI Input: HDMI Type A Female

-Analog Stereo Input: 3.5mm Mini-Stereo Jack

-S/PDIF Digital Audio Input: RCA Jack

-ICSLAN/Ethernet Port: RJ-45 Connector, TCP/IP Port

(ICSLAN 10/100)

-Serial: 3.5mm Pluggable Phoenix Terminal Block

Bidirectional RS-232, Standard NetLinx Baudrate 1200-115k

Parity support Odd/Even/None

- IR RX: 3.5mm Mini-Stereo Jack, Port for IR03 Receiver

(Optional)

- IR TX: 3.5mm Pluggable Phoenix Terminal Block, Port for IR03 Receiver (Optional)

-DXLink Output: RJ-45

-Local Power: 2.1 mm DC Power Jack

HDMI

- Compatible Formats: HDMI, HDCP, DVI nput Signal Type: HDMI, DVI-D (Single Link With Cable

Adapter), DisplayPort ++ (Input Only, With HDMI Cable

Adapter)

-Input Connector: HDMI Type A Female

-Propagation Delay (Typ): 5 us

-Input Voltage (Nominal): 1.0 Vpp Differential

-Input Re-clocking (CDR): Yes

-Input Equalization: Yes, Adaptive

-Data Rate (Max): 4.95 Gbps / 6.75 Gbps,

6.75 Gbps supported when the HDMI DXLink, RX Scaler is

in Bypass mode and format is 1080p60 or less

- Pixel Clock (Max): 165 MHz / 225 MHz, 225 MHz supported when the HDMI DXLink, RX Scaler is in Bypass mode and format is 1080p60 or less

- Progressive Resolution Support: 480p up to 1920x1200 @ 60

Hz (including but not limited to those resolutions shown in the DXLink Twisted Pair Transmitters/Receiver Instruction

Manual

- Interlaced Resolution Support: 480i, 576i, 1080i (including but not limited to those resolutions shown in the DXLink

Twisted Pair Transmitters/Receiver Instruction Manual

Deep Color Support:

- 24-bit, 30-bit, 36-bit

- 30-bit and 36-bit supported when the HDMI DXLink

RX Scaler is in Bypass mode and format is 1080p60 or less

Color Space Support:

- RGB 4:4:4

- YCbCr 4:4:4 and 4:2:2

- (Input signal support for YCbCr 4:4:4 and 4:2:2, output color-space is converted to RGB 4:4:4)

- Audio Format Support: Dolby TrueHD, Dolby Digital, DTS-

HD Master Audio, DTS, 2 CH through 8 CH L-PCM Dolby

Digital and DTS support up to 48kHz, 5.1 channels

- Audio Resolution: 16 bit to 24 bit

- Audio Sample Rate: 32 kHz, 44.1 kHz, 48 kHz, 96 kHz, 192kHz

ANALOG VIDEO

-Compatible Formats: RGBHV, RGBs, RGsB, YPbPr

(HDTV), Y/c (S-Video), C (Composite)

-Progressive Resolution Support: 480p up to 1920x1200 @ 60

Hz including but not limited to those resolutions shown in the

DXLink Twisted Pair Transmitters/Receiver Instruction

Manual

AUDIO (ANALOG & DIGITAL S/PDIF)

-Input Signal Types: Stereo Analog, S/PDIF, Video signal must be present to pass Audio

Input Connectors

3.5mm Mini-Stereo Jack (Analog Stereo)

RCA Jack (S/PDI

1 HPX-600 –C

AMX HYRDAPORT (HDMI, VGA, AND POWER

CONNECTION)

ROBOSHOT30-

QDVI

VADDIO PTZ CAMERA - DVI OR HDMI

- Image Sensor - Exmor 1/2.8”, 2.38 Megapixel, Full HD

(1080p/60 native) High-speed, Low Noise CMOS Image

Sensor.

- Lens - 30X Optical Zoom

- Horizontal FOV - 65° Wide end to 2.3° Tele end, f=4.3mm to

129mm, F1.6 to F4.7

- Supported Resolutions HD Resolutions:

1080p/60/59.94/50/30/25, 1080i/60/59.94/50, 720p/60/59.94/50/30/25, 16:9 Format

- Features - Tri-Synchronous Motion: Concurrent PTZ motor movement and simultaneous PTZ arrival at a stored preset.

Advanced ISP: Vivid and accurate color with extremely fast, razor sharp automatic focus and iris routines.

- S/N Ratio - > 50 dB

- Minimum Illumination - 1.4 lux (F1.6, 50IRE), Recommended illumination >100 lux and above (Normal office lighting is 375-500 lux)

- Minimum Distance - 10mm (wide end) to 1.2m (tele end)

- Pan & Tilt Angle/Speed - Pan/Tilt Angles: ±160°, Tilt: +90° to -30°

Pan/Tilt Speeds: Both Axes 0.35°/sec to 120°/sec

- Sync System Internal

- Control Methods Ethernet for Internal Web Pages and

Telnet, IR Remote Commander and RS-232 for external controllers

8 E655

NEC 65" LED BACKLIT DISPLAY W/ INTEGRATED

TUNER

GENERAL

- Viewable Image Size – 65”

- Native Resolution - 1920 x 1080

- Brightness (Typical) - 350 cd/m2

- Contrast Ratio (Typical) - 4000:1

- Viewing Angle - 176° Vert., 176° Hor.

- Aspect Ratio – 16:9

- Displayable Colors - Over 1.07 billion

- Orientation – Landscape

CONNECTIVITY

- Digital - HDMI x3

- Analog - VGA 15-pin D-sub, RCA Composite/Component

- Audio - RCA Audio, Audio Mini-Jack

- External Control - RS-232C*

- Tuner - ATSC/NTSC Coaxial tuner

- USB - USB Media Player (Video, Audio, Picture)

1 MM-V2-CUSTOM

SPECTRUM MEDIA MANAGER LECTERN

1 ERK-2720-LRD

MID ATLANTIC RACK 4' RACK

1 CBS-ERK-20

MID ATLANTIC RACK CASTER BASE

1 BSF6-100-100FT-BK

CABLE ORGANIZER 100' SPOOL BLACK FLEX WRAP

1 VP4150

INTERLINK RF REMOTE CONTROL

1 M-8LX

POWER CONDITIONER

1 VT1-CP12

1U BLANK VENTED PLATES CONTRACTORS PACK

3 U1

MID ATLATIC SHELVES

1 LBP-1A

LACING BARS LBP-1A (MID ATLANTIC) PACK OF 10

1 MISC

CABLES AND CONNECTORS (CAT 6 - 6,000 FT; MIC

WIRE 1000 FT - DVI TO HDMI 3'

NOTICE OF SCHEDULED SITE VISIT

SITE VISIT: Offerors are “urged and expected” to attend a site visit scheduled for Wednesday, 5 September

2018 at 10:00 am local time. Parties desiring to participate in the site visit must contact Vivian Porter via e-mail at vivian.porter@usmc.mil indicating the company name, point of contact, telephone number, and number of persons attending by Noon on Tuesday, 28 August 2018. Directions and base access information will be provided via email to those that are participating.

QUOTERS ARE CAUTIONED THAT REMARKS AND EXPLANATIONS AT THE SITE VISIT WILL NOT

CHANGE THE TERMS OF THE SOLICITATION UNLESS THE SOLICITATION IS AMENDED IN WRITING

BY THE CONTRACTING OFFICER.

All questions shall be submitted, in writing, by 4:00 pm Eastern on Monday, 27 August 2018. NOTE: Questions received after the above date and time will NOT be answered.

Answers to questions will be provided via amendment posted on the Federal Business Opportunities website www.fbo.gov.

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

0001 1 Each A/V Equipment Upgrade Bldg DD-41

FFP

Remove existing A/V Equipment in building DD-41 Auditorium and provide and install new A/V equipment in accordance with the Performance Work Statement

(PWS)

FOB: Destination

MILSTRIP: M9305518SU00032

PURCHASE REQUEST NUMBER: M9305518SU00032

NET AMT

0002 1 Each Removal & Installation

FFP

Remove existing A/V equipment in building DD-41 Auditorium and provide and install new A/V equipment in accordance with the Performance Work Statement

(PWS)

FOB: Destination

0003 12 Months Warranty / Maintenance / Support.

FFP

Provide warranty, service and maintenance support for installed A/V equipment in accordance with the Performance Work Statement (PWS)

FOB: Destination

1001 12 Months OPTION Warranty / Maintenance / Support.

FFP

Provide warranty, service and maintenance support for installed A/V equipment in accordance with the Performance Work Statement (PWS)

2001 12 Months OPTION Warranty / Maintenance / Support.

FFP

Provide warranty, service and maintenance support for installed A/V equipment in

FOB: Destination

3001 12 Months OPTION Warranty / Maintenance / Support.

FFP

Provide warranty, service and maintenance support for installed A/V equipment in

4001 12 Months OPTION Warranty / Maintenance / Support.

FFP

Provide warranty, service and maintenance support for installed A/V equipment in

INSPECTION AND ACCEPTANCE TERMS

Supplies/services will be inspected/accepted at:

CLIN INSPECT AT INSPECT BY ACCEPT AT ACCEPT BY

0001 Destination Government Destination Government

0002 Destination Government Destination Government

0003 Destination Government Destination Government

1001 Destination Government Destination Government

2001 Destination Government Destination Government

3001 Destination Government Destination Government

4001 Destination Government Destination Government

DELIVERY INFORMATION

CLIN DELIVERY DATE QUANTITY SHIP TO ADDRESS DODAAC /

CAGE

0001 60 dys. ADC 1 M93055

CHARLES COLLINGSWORTH

BLDG DD-41 SCHOOL OF INFANTRY

CAMP GEIGER NC 28542

910-449-0073

M93055

0002 60 dys. ADC 1 (SAME AS PREVIOUS LOCATION)

0003 POP 29-MAR-2019 TO

28-MAR-2020