RFQ_16-T-1114.docx

M67001-16-T-1114

Section SF 1449 - CONTINUATION SHEET

Electronic Mintenance Service Contract

FFP

Electronic Mintenance Service Contract FOB: Destination

MILSTRIP: MMP10016SUTM018

PURCHASE REQUEST NUMBER: MMP10016SUTM018

NET AMT

Parts for Electronic Maintenance

FFP

Parts for Electronic Maintenance. See description in Performance Work Statement 1.2 SCOPE for informaiton on Parts for electronic maintenance.

FOB: Destination

MILSTRIP: MMP10016SUTM018

PURCHASE REQUEST NUMBER: MMP10016SUTM018

NET AMT

INSPECTION AND ACCEPTANCE TERMS

Supplies/services will be inspected/accepted at:

DELIVERY INFORMATION

31-AUG-2016

BILL VAN PELT

BLDG 54 POST LANE

CAMP LEJEUNE NC 28542

910-451-8799 FOB: Destination

MMP100

31-AUG-2016

FOB: Destination

MMP100

QUESTIONS ON SOLICITATION

All questions shall be submitted in writing, no later than 8 April 2016 at 3:00 p.m. local time Camp Lejeune, North Carolina. Questions shall be via email to kathy.wilcox@usmc.mil. Contractors are responsible to ensure receipt of all questions within the required timeframe.

NOTE: Questions received after the above date and time will NOT be answered.

A set of questions and answers will be provided via amendment published on the Federal Business Opportunities website www.fbo.gov.

If there are no questions, no amendment will be posted.

PERFORMANCE WORK STATEMENT

1. OBJECTIVE

Provide Marine Corps Base (MCB), Camp Lejeune with Range electronic system and equipment maintenance non-personal services. The Contractor shall provide this service capability directly for the Marine Corps Base, G-3/5 Department, Range & Training Area Management (RTAM) Division, Range Control Branch Camp Lejeune, NC. The general capability provided to the government is preventive and corrective maintenance of electronic and communication systems and equipment.

0. BACKGROUND

Range Control Branch at Camp Lejeune provides coordinated control of all live fire and training events, monitors air space above MCB Camp Lejeune for both fixed and rotary wing aircraft, and ensures that the Atlantic Intracoastal Waterway is clear for weapons firing into and off MCB Camp Lejeune. Range Control Branch controls/monitors radar image acquisition, lightning, range audiovisuals, range vicinity alerts, and all range communications. There are 98 Live Fire Ranges under Range Control Branch’s management totaling 156,000 acres within a 40 mile radius of the greater Camp Lejeune training complex.

0. SCOPE

The Contractor shall provide corrective and preventive maintenance of two separate Range Control facilities (Buildings 54 and SR46), as well as 99 autonomous systems/entities. The systems are spread across approximately 250 square miles.

The Contractor shall provide all personnel, management, internal communications, administration, materials, and parts. Items obtained by the Contractor via ODC funds to include supplies, materials, and equipment shall be required in order to perform electronic system and equipment operation range maintenance services at the Range Control Branch. Any of these items to include transportation deemed necessary for maintenance and not provided to the Contractor by the Government shall be provided by the Contractor. The Contractor shall submit all materials, parts, supplies and equipment which is acquired for maintenance requirements to the Contracting Officer’s Representative (COR) for approval (using the Purchase Request form) prior to making the purchase. The Contractor shall then submit an invoice to the Government for all approved purchases. Equipment shall be added to the contract as Government Furnished Equipment (GFE) and shall be returned to the Government in the state received less normal wear and tear.

The Contractor shall provide operation and maintenance (preventative and corrective) on electronic and communications systems and equipment throughout the Greater Camp Lejeune Training Complex. The systems and equipment shall be maintained at a sufficient level in order to provide full functional capability 24 hours a day.

0. LOCATION, HOURS OF OPERATION AND PERIOD OF PERFORMANCE

2. Locations

0. There are 98 Live Fire Ranges totaling 156,000 acres within a 40 mile radius of the greater Camp Lejeune training complex. Range Control Branch monitors electronic and communication systems from two central locations; Blackburn Range Control East located on the main side of Camp Lejeune and Blackburn Range Control West located on CC Road off of Highway 17 South. The contractor shall be required to provide corrective and preventive maintenance at both monitoring locations and to all systems, subsystems, towers, radars, and switches in and around the greater Camp Lejeune training complex.

2. Hours of Operation:

1. Work Schedule: Each electronics maintenance technician shall work a full time schedule with the possibility of after hour calls. The Government estimates that all technicians will be required to work approximately 24 hours (combined total for technicians) after normal work hours each month for emergency repair calls. Operational commitments may require the shifting of hours or workdays. The normal work week is typically from Monday through Friday. Contractor must be prepared to provide emergency maintenance and repair services (24) twenty-four hours a day, seven days a week.

1. Holidays: For purposes of scheduling work the Contractor is advised that access to the Government installation may be restricted on Federal holidays:

HOLIDAY OBSERVED

* Note: If a holiday falls on a Saturday, it will be observed on the preceding Friday. If the holiday falls on a Sunday, it will be observed on the following Monday.

2. Period of Performance:

The resultant contract will be a four (4) month contract with a Period of Performance to begin on 1 May 2016 and continue through 31 August 2016 .

0. PERSONNEL REQUIREMENTS, SKILL AND EXPERIENCE SUMMARIES

The Contractor shall provide no fewer than 3 qualified personnel to service electronic systems and equipment for Range Control. Personnel shall have knowledge of electronic systems, electrical management, electronic maintenance, and electronic troubleshooting theories, principles and techniques that enables the technician to understand how and why a specific device or system operates.

3. Contractor Personnel Requirements

Contractors shall analyze the Government’s requirement and propose the amount of technicians. Of the following suggested number of personnel, a minimum of one (1) will be required to maintain a presence at Blackburn from 0800-1630 Monday thru Friday. However, a minimum of (3) personnel must be available to respond to necessary emergencies within 1 hour of Blackburn or COR notification. In such cases the person who is present at Blackburn may be used as one of the three personnel used to respond to identified range communication emergencies.

1. One (1) Electronics Technician, Maintenance III

3. Skill Requirements (Common and Peculiar) and Experience Summaries

1. Requirements Common with All Labor Categories

1. Shall be capable of speaking, writing, reading and understanding the English language.

1. Shall be physically capable of:

a. Climbing a microwave and antenna tower with a maximum height of 200 feet in order to execute preventative and corrective maintenance.

b. Climbing ladders and multiple flights of stairs.

c. Lifting objects up to 50 lbs.

1. Possess appropriate tower climbing license to perform preventative and corrective maintenance. License/proof of certification shall demonstrate current training in working at heights with high exposure, fall protection, fall protection/arrest systems (maintenance, usage, and donning) according to American National Standards Issue (ANSI) standard Z359.2-2007 AND OSHA standard 1926.500, 1926.502, 1926 Subpart M App C, 1926 Subpart M App E, and 1926.503.

1. Shall be capable of solving practical problems encountered with electrical and electronic circuits.

1. Shall be capable of establishing testing methods for electrical, electronic, electromechanical, and mechanical devices and mechanisms.

1. Shall be capable of applying engineering principles in solving design, development, and modification problems of parts or assemblies for products or systems.

(8) Personnel subject to this requirement should possess the following qualities and attributes:

0. Possess a well rounded technical background as evidenced by experience, qualifications, and certifications.

0. Demonstrate fully developed skills and experience related to technical fields under their cognizance.

0. Demonstrate the ability to work independently with little or no supervision.

0. Demonstrate the ability to research, read, and interpret technical manuals, and directives.

0. Demonstrate the ability to write with clarity and technical accuracy.

0. Promote stability and excellence in performance.

0. Have the ability to work with military and Government employees.

0. Have the ability to handle multiple tasks, changing priorities in a timely manner.

0. Demonstrate strong verbal and written communication skills necessary to make presentations to senior personnel.

0. Shall be computer literate and have an understanding of computer networks and symbols.

0. Shall be able to use word processing, spreadsheet and presentation software.

1. Shall be capable of attending briefs, classes, conferences and meetings offering technical advice during these meetings as needed.

1. Electronics Technician, Maintenance I Specific Skill and Experience Summary (1.4.1.a):

1. Electronics Technician, Maintenance I Skill Requirements: The Electronics Technician, Maintenance I shall meet the following skill requirements:

1. Two (2) or more years of electronics maintenance experience.

1. Background in Mechanics and Maintenance and Repair Occupations.

1. Basic understanding of electrical and electronic circuits, and establishment of testing methods for electrical, electronic, electromechanical, and mechanical devices and mechanisms.

1. Electronics Technician, Maintenance I Experience Summary: The Electronics Technician, Maintenance I shall be experienced/qualified and knowledgeable in, but not limited to the following:

1. Applies technical knowledge to perform simple or routine tasks following detailed instructions.

1. Experience performing such tasks as replacing components and wiring circuits; repairing simple electronic equipment; and taking test readings using common instruments such as digital multimeters, signal generators, semiconductor testers, curve tracers, and oscilloscopes.

1. Electronics Technician, Maintenance II Peculiar Skill and Experience Summary (1.4.1.b):

2. Electronics Technician, Maintenance II Skill Requirements: The Electronics Technician, Maintenance II shall meet the following skill requirements:

1. Five (5) or more years of electronics maintenance experience.

1. Background in Mechanics and Maintenance and Repair Occupations.

1. Intermediate to advanced understanding of electrical and electronic circuits, and establishment of testing methods for electrical, electronic, electromechanical, and mechanical devices and mechanisms.

2. Electronics Technician, Maintenance II Experience Summary: The Electronics Technician, Maintenance II shall be experienced/qualified and knowledgeable in, but not limited to the following:

1. Applies comprehensive technical knowledge to solve complex problems by interpreting manufacturers' manuals or similar documents.

1. Experience performing such tasks as replacing components and wiring circuits; repairing simple electronic equipment; and taking test readings using common instruments such as digital multimeters, signal generators, semiconductor testers, curve tracers, and oscilloscopes.

1. Work requires familiarity with the interrelationships of circuits and judgment in planning work sequence and in selecting tools and testing instruments.

1. Experience receiving technical guidance, as required, from supervisor or higher level technician, where work is reviewed for compliance with accepted practices.

1. Shall possess ability to provide technical guidance to lower level technicians.

1. Electronics Technician, Maintenance III Peculiar Skill and Experience Summary (1.4.1.c):

3. Electronics Technician, Maintenance III Skill Requirements: The Electronics Technician, Maintenance III shall meet the following skill requirements:

1. Eight (8) or more years of electronics maintenance experience.

1. Background in Mechanics and Maintenance and Repair Occupations.

1. Advanced understanding of electrical and electronic circuits, and establishment of testing methods for electrical, electronic, electromechanical, and mechanical devices and mechanisms.

3. Electronics Technician, Maintenance III Experience Summary: The Electronics Technician, Maintenance III shall be experienced/qualified and knowledgeable in, but not limited to the following:

1. Applies advanced technical knowledge to solve unusually complex problems that typically cannot be solved solely by referencing manufacturers' manuals or similar documents. Examples of such problems include determining the location and density of circuitry, evaluating electromagnetic radiation, isolating malfunctions, and incorporating engineering changes.

1. Experience performing such tasks as replacing components and wiring circuits; repairing simple electronic equipment; and taking test readings using common instruments such as digital multimeters, signal generators, semiconductor testers, curve tracers, and oscilloscopes.

1. Work requires extensive familiarity with the interrelationships of circuits and judgment in planning work sequence and in selecting tools and testing instruments.

1. Experience exercising independent judgment in performing such tasks as making circuit analyses, calculating wave forms, and tracing relationships in signal flow.

1. Experience using complex test instruments such as high frequency pulse generators, frequency synthesizers, distortion analyzers, and complex computer control equipment.

1. Shall possess ability to provide technical guidance to lower level technicians.

deduction if AQL is not met Incentive

5% of monthly contract price penalty for unsatisfactory performance.

Exercise Option period for Satisfactory performance.

90% COR Conducts unscheduled visual inspections of electronic maintenance program files.

Work shall include routine operation, inspection, checks, adjustments, and maintenance. Minimum acceptable frequencies shall be accomplished per manufacturer’s recommendations. Contractor shall physically be on site a minimum of five days a week to devote to preventive maintenance services at Blackburn facilities and other various locations.

Preventive Maintenance work shall include, but not be limited to: operational inspection and adjustment to ensure satisfactory functioning of equipment and systems, detecting and correcting causes of unusual noises, vibrations, temperatures, manufacturer’s recommended lubrications or adjustments to bring equipment or systems within manufacturers’ specifications, repairs, including defective parts and component replacements, equipment housekeeping and cleaning, maintaining lamps and active signals, battery replacement, and other services as required to maintain a safe and acceptable operating condition.

1.

Conduct Daily Checks and scheduled Preventative Maintenance on time. Deficiencies discovered during preventative maintenance shall be corrected the same day or as soon as parts/consumables are available. Repair equipment failures that would interrupt normal daily operations. Maintain a rating of “Mission Capable” on all electrical systems and components; Mission capable is defined as range control being able to perform all or its designated missions.

95%

The contractor shall submit copies of the completed PM Checklist(s) with the monthly invoice to the government.

1.5 Performance Requirements Summary (PRS). The performance standards for this statement of work are stated in the performance requirements summary (PRS). The COR will periodically assess the contractor’s performance to ensure the contractor is performing up to the specified standards:

Identify and order replacement parts for equipment that may become unserviceable due to the normal wear and tear or using the manufacturer’s recommendations for replacement.

The COR will meet with the contractor semiannually and discuss the plan for procuring replacement parts for the electronic equipment.

Post roster of on-call personnel in Blackburn. Technicians or operators shall identify and report problem for maintenance requirements.

Identify and repair equipment failures using spare parts on hand. Notify the COR when repairs are not possible. Respond within 1 hour of after-hours call. Be on site within 2 hours of call. Be on site within 2 hours of call. The on-call roster shall be updated to include the most current recall information of electronic technicians.

100%

Blackburn Technician will call the COR if any after hours outages occur and provide the type of problem date and time of outage.

The COR will accompany the contractor on all meetings, site visits, conferences, conference calls pertaining to electronic maintenance.

Electronic Engineering Support for New requirements The Contractor shall provide the engineering level of expertise necessary (including research) to support new requirements or additional systems in new locations. The contractor shall provide assistance in planning and implementation for repurposing electronic equipment. The contractor shall attend meetings, site visits, conferences, conference calls in order to assist with engineering and technical matters with new or additional system requirements.

Advise the COR on technical matters concerning the repurposing of electronic equipment. Advise the COR on technical matters concerning new electronic equipment and provide a detailed written estimate identifying all equipment, supplies and labor to complete the installation or modification of new electronic equipment and systems.

80% The COR will review the estimate, equipment and material plan. The COR will accompany the contractor on all meetings, site visits, conferences, conference calls pertaining to electronic maintenance.

1% of monthly contract price penalty for unsatisfactory performance.

Failure to meet the above stated Acceptable Quality Level (AQL)/Frequency will result in the Contracting Department opting to not exercise the following option period.

The Contractor shall provide maintenance (preventative and corrective) on electronic and communications systems and equipment throughout the Greater Camp Lejeune Training Complex. Specific systems and equipment, associated quantity and location are found in Table 1. The Contractor will not be required to operate the equipment.

Table 1

* Systems controlled / monitored within Range Control “Blackburn” Building 54 and Building SR46

4 subsystems Blackburn and North Onslow Beach (NOB), Tower ST21, Bear Tower ST23 (land line, direct/hot line, fiber optic circuits and T-1 circuit

1 repeater 7 subsystems Bldg. 54 & SR46 SSR45 Tower Sneads Ferry, Holly Ridge, Shell Road, Willis Landing, Starling Tower, Dixon School, TLZ Lark

HIS (Highway Information System)* HAR (Highway Advisory Radio - subsystem)*

8 subsystems Bldg. 54 & SR46 ; SR-6, SR-7

SR-8, SR-9, SR10, G-27,ST21 & ST23

34.70 MHz Range Control Tactical Ground Safety Net, Primary (6 radios)

233.8 MHz Military aviation net, Primary & Secondary (4 radios)

40.10 MHz Range Control Tactical Ground Safety Net, Secondary (2 radios)

119.5 MHz Civilian aviation net, Primary & Secondary (4 radios)

243.0 MHz Guard Radio Net (2 radios)

121.5 MHz Guard Radio Net (2 radios)

8 Antenna /Microwave Towers 50’-150’ towers ST23, ST21, Bldg. 54 S170, OP-9 SSR36, SSR45, SBA255, OP-5 ST-32 and Starling Tower

CLAUSES INCORPORATED BY FULL TEXT

52.212-2 EVALUATION--COMMERCIAL ITEMS (OCT 2014) (TAILORED)

(a) The Government will award a contract resulting from this solicitation to the responsible offeror whose offer conforming to the solicitation will be most advantageous to the Government, price and other factors considered. The following factors shall be used to evaluate offers:

This is a request for OPEN MARKET PRICED quotes for services. The proposed acquisition is unrestricted. The associated North American Industrial Classification System (NAICS) Code is 561210 Facilities Support Services. The size standard is $38.5 million.

BASIS OF AWARD: The Government will solicit and award this contract using simplified acquisition procedures, in accordance with FAR Subpart 13.0. It is the Government’s intention to issue a single firm-fixed price purchase order on an “all or none” basis for services.

The Government intends to award to the quoter who represents the Lowest Price Technically Acceptable (LPTA). Quotes will be evaluated and ranked according to price, from lowest to highest. The Government reserves the right to evaluated only the technical quote of the lowest price quoter. Other technical quotes may not be evaluated unless the Government determines the lowest price quoter to be unacceptable or non-responsive. In the event the Government determines the lowest price quoter to be unacceptable, the technical quote of the next lowest price quoter will be evaluated. This process will continue until a technical proposal is determined to be acceptable.

EVALUATION: Vendors responding to this announcement shall submit their quote in accordance with FAR 52.212-1. Submission of quote shall include the following:

(1) Technical acceptability: Quoter shall provide relevant certification and resumes that demonstrate experience and skill levels as set forth in the PWS. Offeror shall include a recruiting plan that demonstrates sound procedures for recruitment, retention, and training of personnel.

(2) Delivery: Ability to meet the required Period of Performance of 1 May 2016 through 31 August 2016.

(3) Price.

Award will be made on the basis of the lowest price technically acceptable (LPTA) of quotes meeting or exceeding the acceptability standard for non-cost factors. The Government intends to evaluate quotes and award a contract without discussions with vendors. Vendors should not expect requests for clarification or additional information from the Government. Therefore, the vendor’s initial quote should contain the vendor’s best terms from a price and technical standpoint. However, the Government reserves the right to conduct discussions with vendors if later determined by the Contracting Officer to be necessary and in the best interest to the Government. The Government may reject any or all quotes if such action is in the public interest; and may waive informalities and minor irregularities in quotes received.

SUBMISSION REQUIREMENTS. Quoters shall include:

1) Completed FAR provision 52.204-17 – Check appropriate box. No signature required but please put company name on document.

2) Completed FAR provision 52.212-3 – Check appropriate boxes at 52.213-3(b)(2) and (3) and put company name on document. If no changes are necessary, clearly state so in submission package.

3) Completed FAR provision 52.209-11 – Check appropriate boxes. No signature required but please put company name on document.

4) Clearly state ability to meet specified delivery time after receipt of contract.

5) Confirm that your price is “Open Market” and not GSA pricing.

6) Provide the following information: CAGE Code and DUNS Number.

SUBMISSION OF QUTOES. Quotes related to this RFQ shall be received by the Contracting Department by the date and time indicated in block 8 on the front page of the solicitation to be considered for award. The information submitted shall be clear and legible(Note: repetitively copied data loses its clarity and legibility.)

Quotes may be submitted via email to kathy.wilcox@usmc.mil (PREFERRED METHOS); via USPS to Commanding General, Attn: Contracting Department, P.O. Boxes 8368, Camp Lejeune, NC 28547-8368; or via hand delivery/courier (UPS, FEDEX, Etc.) to Contracting Department, Attn: Kathy Wilcox, Bldg. 1116, Camp Lejeune, NC 28542. It is solely the contractor’s responsibility to ensure quotes are received within the required timeframe.

(End of provision)

CLAUSES INCORPORATED BY REFERENCE

CLAUSES INCORPORATED BY FULL TEXT

52.212-5 CONTRACT TERMS AND CONDITIONS REQUIRED TO IMPLEMENT STATUTES OR EXECUTIVE ORDERS--COMMERCIAL ITEMS (FEB 2016)

(a) The Contractor shall comply with the following Federal Acquisition Regulation (FAR) clauses, which are incorporated in this contract by reference, to implement provisions of law or Executive orders applicable to acquisitions of commercial items:

(1) 52.209-10, Prohibition on Contracting with Inverted Domestic Corporations (Nov 2015).

(2) 52.233-3, Protest After Award (AUG 1996) (31 U.S.C. 3553).

(3) 52.233-4, Applicable Law for Breach of Contract Claim (OCT 2004) (Public Laws 108-77 and 108-78 (19 U.S.C. 3805 note)).

(b) The Contractor shall comply with the FAR clauses in this paragraph (b) that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial items: (Contracting Officer check as appropriate.)

___ (1) 52.203-6, Restrictions on Subcontractor Sales to the Government (Sept 2006), with Alternate I (Oct 1995) (41 U.S.C. 4704 and 10 U.S.C. 2402).

____ (2) 52.203-13, Contractor Code of Business Ethics and Conduct (Oct 2015) (41 U.S.C. 3509).

____ (3) 52.203-15, Whistleblower Protections under the American Recovery and Reinvestment Act of 2009 (June 2010) (Section 1553 of Pub. L. 111-5). (Applies to contracts funded by the American Recovery and Reinvestment Act of 2009.)

___ (4) 52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards (Oct 2015) (Pub. L. 109-282) (31 U.S.C. 6101 note).

___ (5) [Reserved]

___ (6) 52.204-14, Service Contract Reporting Requirements (JAN 2014) (Pub. L. 111-117, section 743 of Div. C).

___ (7) 52.204-15, Service Contract Reporting Requirements for Indefinite-Delivery Contracts (JAN 2014) (Pub. L. 111-117, section 743 of Div. C).

___ (8) 52.209-6, Protecting the Government's Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment. (Oct 2015) (31 U.S.C. 6101 note).

____ (9) 52.209-9, Updates of Publicly Available Information Regarding Responsibility Matters (July 2013) (41 U.S.C. 2313).

____ (10) [Reserved]

____ (11)(i) 52.219-3, Notice of HUBZone Set-Aside or Sole-Source Award (NOV 2011) (15 U.S.C. 657a).

____ (ii) Alternate I (NOV 2011) of 52.219-3.

____ (12) (i) 52.219-4, Notice of Price Evaluation Preference for HUBZone Small Business Concerns (OCT 2014) (if the offeror elects to waive the preference, it shall so indicate in its offer) (15 U.S.C. 657a).

____ (ii) Alternate I (JAN 2011) of 52.219-4.

____ (13) [Reserved]

____ (14)(i) 52.219-6, Notice of Total Small Business Set-Aside (NOV 2011) (15 U.S.C. 644).

____ (ii) Alternate I (NOV 2011).

____ (iii) Alternate II (NOV 2011).

____ (15)(i) 52.219-7, Notice of Partial Small Business Set-Aside (June 2003) (15 U.S.C. 644).

____ (ii) Alternate I (Oct 1995) of 52.219-7.

____ (iii) Alternate II (Mar 2004) of 52.219-7.

____ (16) 52.219-8, Utilization of Small Business Concerns (OCT 2014) (15 U.S.C. 637(d)(2) and (3)).

____ (17)(i) 52.219-9, Small Business Subcontracting Plan (Oct 2015) (15 U.S.C. 637(d)(4)).

____ (ii) Alternate I (Oct 2001) of 52.219-9.

____ (iii) Alternate II (Oct 2001) of 52.219-9.

____ (iv) Alternate III (Oct 2015) of 52.219-9.

____ (18) 52.219-13, Notice of Set-Aside of Orders (NOV 2011) (15 U.S.C. 644(r)).

____ (19) 52.219-14, Limitations on Subcontracting (NOV 2011) (15 U.S.C. 637(a)(14)).

____ (20) 52.219-16, Liquidated Damages—Subcon-tracting Plan (Jan 1999) (15 U.S.C. 637(d)(4)(F)(i)).

____ (21) 52.219-27, Notice of Service-Disabled Veteran-Owned Small Business Set-Aside (NOV 2011) (15 U.S.C. 657f).

____ (22) 52.219-28, Post Award Small Business Program Rerepresentation (July 2013) (15 U.S.C. 632(a)(2)).

____ (23) 52.219-29, Notice of Set-Aside for, or Sole Source Award to, Economically Disadvantaged Women-Owned Small Business Concerns (Dec 2015) (15 U.S.C. 637(m)).

____(24) 52.219-30, Notice of Set-Aside for, or Sole Source Award to, Women-Owned Small Business Concerns Eligible Under the Women-Owned Small Business Program (Dec 2015) (15 U.S.C. 637(m)).

____ (25) 52.222-3, Convict Labor (June 2003) (E.O. 11755).

____(26) 52.222-19, Child Labor--Cooperation with Authorities and Remedies (FEB 2016) (E.O. 13126).

____ (27) 52.222-21, Prohibition of Segregated Facilities (Apr 2015).

____ (28) 52.222-26, Equal Opportunity (Apr 2015) (E.O. 11246).

____ (29) 52.222-35, Equal Opportunity for Veterans (Oct 2015) (38 U.S.C. 4212).

____ (30) 52.222-36, Equal Opportunity for Workers with Disabilities (July 2014) (29 U.S.C. 793).

____ (31) 52.222-37, Employment Reports on Veterans (FEB 2016) (38 U.S.C. 4212).

____ (32) 52.222-40, Notification of Employee Rights Under the National Labor Relations Act (Dec 2010) (E.O. 13496).

____ (33)(i) 52.222-50, Combating Trafficking in Persons (March 2, 2015) (22 U.S.C. chapter 78 and E.O. 13627).

____ (ii) Alternate I (March 2, 2015) of 52.222-50 (22 U.S.C. chapter 78 and E.O. 13627).

____ (34) 52.222-54, Employment Eligibility Verification (Oct 2015). (E. O. 12989). (Not applicable to the acquisition of commercially available off-the-shelf items or certain other types of commercial items as prescribed in 22.1803.)

____ (35)(i) 52.223-9, Estimate of Percentage of Recovered Material Content for EPA–Designated Items (May 2008) (42 U.S.C. 6962(c)(3)(A)(ii)). (Not applicable to the acquisition of commercially available off-the-shelf items.)

____ (ii) Alternate I (May 2008) of 52.223-9 (42 U.S.C. 6962(i)(2)(C)). (Not applicable to the acquisition of commercially available off-the-shelf items.)

____ (36) (i) 52.223-13, Acquisition of EPEAT® Registered Imaging Equipment (Jun 2014) (E.O.s 13423 and 13514).

____ (ii) Alternate I (OCT 2015) of 52.223-13.

____ (37)(i) 52.223-14, Acquisition of EPEAT® Registered Televisions (Jun 2014) (E.O.s 13423 and 13514).

____ (ii) Alternate I (Jun 2014) of 52.223-14.

____ (38) 52.223-15, Energy Efficiency in Energy-Consuming Products (Dec 2007) (42 U.S.C. 8259b).

____ (39)(i) 52.223-16, Acquisition of EPEAT[supreg]-Registered Personal Computer Products (OCT 2015) (E.O.s 13423 and 13514).

____ (ii) Alternate I (Jun 2014) of 52.223-16.

____ (40) 52.223-18, Encouraging Contractor Policies to Ban Text Messaging While Driving (Aug 2011) (E.O. 13513).

____ (41) 52.225-1, Buy American--Supplies (May 2014) (41 U.S.C. chapter 83).

____(42) (i) 52.225-3, Buy American--Free Trade Agreements--Israeli Trade Act (May 2014) (41 U.S.C. chapter 83, 19 U.S.C. 3301 note, 19 U.S.C. 2112 note, 19 U.S.C. 3805 note, 19 U.S.C. 4001 note, Pub. L.

103-182, 108-77, 108-78, 108-286, 108-302, 109-53, 109-169, 109-283, 110-138, 112-41, 112-42, and 112-43.

____ (ii) Alternate I (May 2014) of 52.225-3.

____ (iii) Alternate II (May 2014) of 52.225-3.

____ (iv) Alternate III (May 2014) of 52.225-3.

____ (43) 52.225-5, Trade Agreements (FEB 2016) (19 U.S.C. 2501, et seq., 19 U.S.C. 3301 note).

____ (44) 52.225-13, Restrictions on Certain Foreign Purchases (June 2008) (E.O.’s, proclamations, and statutes administered by the Office of Foreign Assets Control of the Department of the Treasury).

____ (45) 52.225-26, Contractors Performing Private Security Functions Outside the United States (Jul 2013) (Section 862, as amended, of the National Defense Authorization Act for Fiscal Year 2008; 10 U.S.C. 2302 Note).

____ (46) 52.226-4, Notice of Disaster or Emergency Area Set-Aside (Nov 2007) (42 U.S.C. 5150

____ (47) 52.226-5, Restrictions on Subcontracting Outside Disaster or Emergency Area (Nov 2007) (42 U.S.C. 5150).

____ (48) 52.232-29, Terms for Financing of Purchases of Commercial Items (Feb 2002) (41 U.S.C. 4505, 10 U.S.C. 2307(f)).

____ (49) 52.232-30, Installment Payments for Commercial Items (Oct 1995) (41 U.S.C. 4505, 10 U.S.C. 2307(f)).

____ (50) 52.232-33, Payment by Electronic Funds Transfer—System for Award Management (July 2013) (31 U.S.C. 3332).

____ (51) 52.232-34, Payment by Electronic Funds Transfer—Other than System for Award Management (July 2013) (31 U.S.C. 3332).

____ (52) 52.232-36, Payment by Third Party (MAY 2014) (31 U.S.C. 3332).

____ (53) 52.239-1, Privacy or Security Safeguards (Aug 1996) (5 U.S.C. 552a).

____ (54)(i) 52.247-64, Preference for Privately Owned U.S.-Flag Commercial Vessels (Feb 2006) (46 U.S.C. Appx. 1241(b) and 10 U.S.C. 2631).

____ (ii) Alternate I (Apr 2003) of 52.247-64.

(c) The Contractor shall comply with the FAR clauses in this paragraph (c), applicable to commercial services, that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial items: (Contracting Officer check as appropriate.)

_____(1) 52.222-17, Nondisplacement of Qualified Workers (May 2014) (E.O. 13495).

_____ (2) 52.222-41, Service Contract Labor Standards (MAY 2014) (41 U.S.C. chapter 67).

_____ (3) 52.222-42, Statement of Equivalent Rates for Federal Hires (MAY 2014) (29 U.S.C. 206 and 41 U.S.C. chapter 67).

_____ (4) 52.222-43, Fair Labor Standards Act and Service Contract Labor Standards--Price Adjustment (Multiple Year and Option Contracts) (MAY 2014) (29 U.S.C. 206 and 41 U.S.C. chapter 67).

_____ (5) 52.222-44, Fair Labor Standards Act and Service Contract Labor Standards--Price Adjustment (MAY 2014) (29 U.S.C 206 and 41 U.S.C. chapter 67).

_____ (6) 52.222-51, Exemption from Application of the Service Contract Labor Standards to Contracts for Maintenance, Calibration, or Repair of Certain Equipment--Requirements (MAY 2014) (41 U.S.C. chapter 67).

_____ (7) 52.222-53, Exemption from Application of the Service Contract Labor Standards to Contracts for Certain Services--Requirements (MAY 2014) (41 U.S.C. chapter 67).

_____ (8) 52.222-55, Minimum Wages Under Executive Order 13658 (DEC 2015) (E.O. 13658).

_____ (9) 52.226-6, Promoting Excess Food Donation to Nonprofit Organizations (MAY 2014) (42 U.S.C. 1792).

_____ (10) 52.237-11, Accepting and Dispensing of $1 Coin (Sept 2008) (31 U.S.C. 5112(p)(1)).

(d) Comptroller General Examination of Record. The Contractor shall comply with the provisions of this paragraph (d) if this contract was awarded using other than sealed bid, is in excess of the simplified acquisition threshold, and does not contain the clause at 52.215-2, Audit and Records--Negotiation.

(1) The Comptroller General of the United States, or an authorized representative of the Comptroller General, shall have access to and right to examine any of the Contractor's directly pertinent records involving transactions related to this contract.

(2) The Contractor shall make available at its offices at all reasonable times the records, materials, and other evidence for examination, audit, or reproduction, until 3 years after final payment under this contract or for any shorter period specified in FAR Subpart 4.7, Contractor Records Retention, of the other clauses of this contract. If this contract is completely or partially terminated, the records relating to the work terminated shall be made available for 3 years after any resulting final termination settlement. Records relating to appeals under the disputes clause or to litigation or the settlement of claims arising under or relating to this contract shall be made available until such appeals, litigation, or claims are finally resolved.

(3) As used in this clause, records include books, documents, accounting procedures and practices, and other data, regardless of type and regardless of form. This does not require the Contractor to create or maintain any record that the Contractor does not maintain in the ordinary course of business or pursuant to a provision of law.

(e) (1) Notwithstanding the requirements of the clauses in paragraphs (a), (b), (c), and (d) of this clause, the Contractor is not required to flow down any FAR clause, other than those in this paragraph (e)(1)in a subcontract for commercial items. Unless otherwise indicated below, the extent of the flow down shall be as required by the clause—

(i) 52.203-13, Contractor Code of Business Ethics and Conduct (Oct 2015) (41 U.S.C. 3509).

(ii) 52.219-8, Utilization of Small Business Concerns (OCT 2014) (15 U.S.C. 637(d)(2) and (3)), in all subcontracts that offer further subcontracting opportunities. If the subcontract (except subcontracts to small business concerns) exceeds $700,000 ($1.5 million for construction of any public facility), the subcontractor must include 52.219-8 in lower tier subcontracts that offer subcontracting opportunities.

(iii) 52.222-17, Nondisplacement of Qualified Workers (MAY 2014) (E.O. 13495). Flow down required in accordance with paragraph (l) of FAR clause 52.222-17.

(iv) 52.222-21, Prohibition of Segregated Facilities (Apr 2015).

(v) 52.222-26, Equal Opportunity (APR 2015) (E.O. 11246).

(vi) 52.222-35, Equal Opportunity for Veterans (Oct 2015) (38 U.S.C. 4212).

(vii) 52.222-36, Equal Opportunity for Workers with Disabilities (Jul 2014) (29 U.S.C. 793).

(viii) 52.222-37, Employment Reports on Veterans (Feb 2016) (38 U.S.C. 4212).

(ix) 52.222-40, Notification of Employee Rights Under the National Labor Relations Act (Dec 2010) (E.O. 13496). Flow down required in accordance with paragraph (f) of FAR clause 52.222-40.

(x) 52.222-41, Service Contract Labor Standards (May 2014), (41 U.S.C. chapter 67).

(xi) _____ (A) 52.222-50, Combating Trafficking in Persons (March 2, 2015) (22 U.S.C. chapter 78 and E.O. 13627).

_____ (B) Alternate I (March 2, 2015) of 52.222-50 (22 U.S.C. chapter 78 and E.O. 13627).

(xii) 52.222-51, Exemption from Application of the Service Contract Labor Standards to Contracts for Maintenance, Calibration, or Repair of Certain Equipment--Requirements (May 2014) (41 U.S.C. chapter 67.)

(xiii) 52.222-53, Exemption from Application of the Service Contract Labor Standards to Contracts for Certain Services--Requirements (May 2014) (41 U.S.C. chapter 67)

(xiv) 52.222-54, Employment Eligibility Verification (Oct 2015) (E. O. 12989).

(xv)52.222-55, Minimum Wages Under Executive Order 13658 (DEC 2015) (E.O. 13658).

(xvi) 52.225-26, Contractors Performing Private Security Functions Outside the United States (Jul 2013) (Section 862, as amended, of the National Defense Authorization Act for Fiscal Year 2008; 10 U.S.C. 2302 Note).

(xvii) 52.226-6, Promoting Excess Food Donation to Nonprofit Organizations. (May 2014) (42 U.S.C. 1792). Flow down required in accordance with paragraph (e) of FAR clause 52.226-6.

(xviii) 52.247-64, Preference for Privately-Owned U.S. Flag Commercial Vessels (Feb 2006) (46 U.S.C. Appx 1241(b) and 10 U.S.C. 2631). Flow down required in accordance with paragraph (d) of FAR clause 52.247-64.

(2) While not required, the Contractor may include in its subcontracts for commercial items a minimal number of additional clauses necessary to satisfy its contractual obligations.

(End of clause)

52.204-17 OWNERSHIP OF CONTROL OF OFFEROR (NOV 2014)

(a) Definitions. As used in this provision--

Commercial and Government Entity (CAGE) code means—

(1) An identifier assigned to entities located in the United States or its outlying areas by the Defense Logistics Agency (DLA) Contractor and Government Entity (CAGE) Branch to identify a commercial or government entity, or

(2) An identifier assigned by a member of the North Atlantic Treaty Organization (NATO) or by the NATO Support Agency (NSPA) to entities located outside the United States and its outlying areas that the DLA Contractor and Government Entity (CAGE) Branch records and maintains in the CAGE master file. This type of code is known as an NCAGE code.

Highest-level owner means the entity that owns or controls an immediate owner of the offeror, or that owns or controls one or more entities that control an immediate owner of the offeror. No entity owns or exercises control of the highest level owner.

Immediate owner means an entity, other than the offeror, that has direct control of the offeror. Indicators of control include, but are not limited to, one or more of the following: Ownership or interlocking management, identity of interests among family members, shared facilities and equipment, and the common use of employees.

(b) The Offeror represents that it [ ___ ] has or [ ___ ] does not have an immediate owner. If the Offeror has more than one immediate owner (such as a joint venture), then the Offeror shall respond to paragraph (c) and if applicable, paragraph (d) of this provision for each participant in the joint venture.

(c) If the Offeror indicates ``has'' in paragraph (b) of this provision, enter the following information:

Immediate owner CAGE code:

Immediate owner legal name: ___

(Do not use a ``doing business as'' name)

Is the immediate owner owned or controlled by another entity?:

[ ___ ] Yes or [ ___ ] No.

(d) If the Offeror indicates ``yes'' in paragraph (c) of this provision, indicating that the immediate owner is owned or controlled by another entity, then enter the following information:

Highest-level owner CAGE code:

Highest-level owner legal name:

(Do not use a ``doing business as'' name)

52.209-11 REPRESENTATION BY CORPORATIONS REGARDING DELINQUENT TAX LIABILITY OR A

FELONY CONVICTION UNDER ANY FEDERAL LAW (FEB 2016)

(a) As required by sections 744 and 745 of Division E of the Consolidated and Further Continuing Appropriations Act, 2015 (Pub. L. 113-235), and similar provisions, if contained in subsequent appropriations acts, the Government will not enter into a contract with any corporation that--

(1) Has any unpaid Federal tax liability that has been assessed, for which all…