Item Unique Identification Checklist 6150015559772WF.pdf
PDF 70 KB Posted
- Attached to
- F-16 Cable Assemblies Federal contract opportunity
- Solicitation number
- FA8212-21-R-0002
About this file
This document contains an Item Unique Identification (IUID) checklist and details for a federal contract solicitation. The solicitation is for the procurement of seven F-16 cable assembly part numbers to be used as production assets and first article samples. Each part number will have separate contract line items (CLINs) for production, first article requirements, and data deliverables. Quantities required per part number range from 4 to 22 units. The anticipated award date is 30 April 2021 and the solicitation is restricted to prequalified sources who must submit a Source Approval Request. The solicitation will be conducted by the Department of the Air Force Materiel Command Air Force Sustainment Center as a small business set-aside. The IUID checklist provides guidance on unique item identification marking requirements for the cable assemblies to be procured, including human-readable and machine-readable matrix labeling standards.
View the file
Other files for this federal contract opportunity
Show all 50
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
ITEM UNIQUE IDENTIFICATION (IUID) CHECKLIST
I. IUID DETAILS: DFARS 252.211.7003
SECTION (c) (1) (ii) APPLIES TO THE FOLLOWING:
ITEM REQUIRING IUID MARKING
NSN
6150015559772WF
VERSION NUMBER
NOUN
CABLE ASSEMBLY,SPEC
INITIATOR
Lucas, Timothy J
ORGANIZATION CODE / OFFICE SYMBOL
416 SCMS / GUEAA
COMMERCIAL PHONE
801-775-4528
DSN PHONE
775-4528
CAGE / REFERENCE NUMBER
MARKING IS TO BE PERFORMED IN ACCORDANCE WITH THE LATEST VERSION OF MIL-STD-130
MARKING GUIDANCE
Recommended Marking Instruction
ENGINEERING DRAWING / ECP / ECO NUMBER
MARKING TYPE
Data Label
MARKING METHOD
Ink Jet
DESCRIPTION / LOCATION
IUID (Item Unique Identifier) requirements and expectations which the contractor must ensure are complied with.
a. Contractors drawings shall be changed or supplemented by contractor for IUID compliance.
b. Label shall contain all data on existing label, (if existing label is to be replaced), only delete existing label with government engineering permission.
c. Use HRI (Human Readable) and Machine Readable Matrix. (USAF not equipped to read barcode).
d. IUID Matrix needs to be highly visible, in a location easily accessible.
e. IUID marking must be permanent.
f. MIL-STD-130, ISO 15434, ISO 15415, and ISO 15418, (Part Marking as per MIL-STD-130 in lieu of FPS-3008)
i. IUID marking specifications.
1. Minimum 1/8 inch lettering on Human readable to include:
a. Cage (17V)
b. P/N (1P)
c. Serial Number (IS)
2. Minimum 1/4 inch square on Machine Readable 2D Matrix -construct 2 - to include
a. Cage (17V)
b. P/N (1P)
c. Serial Number (IS)
REMARKS
ATTACHMENT(S)
II. EMBEDDED ITEMS
SECTION (c) (1) (iii) APPLIES TO THE FOLLOWING:
NSN NOUN
CAGE / REFERENCE NUMBER
ITEM IS AN EMBEDDED ITEM FOR NSN / PSEUDO NSN: 6150015559772WF
MARKING GUIDANCE ENGINEERING DRAWING / ECP / ECO NUMBER
MARKING TYPE MARKING METHOD
DESCRIPTION / LOCATION
Page 1 of 2IUID Version 1Generated by PRPS using Jasper Reports on 15 Dec 2020
ITEM UNIQUE IDENTIFICATION (IUID) CHECKLIST
REMARKS
ATTACHMENT(S)
Page 2 of 2IUID Version 1Generated by PRPS using Jasper Reports on 15 Dec 2020
File details come from the government source that posted it. Updated .