Engineering Data Requirements (Attachment A) 6150015558898WF.pdf
PDF 139 KB Posted
- Attached to
- F-16 Cable Assemblies Federal contract opportunity
- Solicitation number
- FA8212-21-R-0002
About this file
This solicitation notice seeks proposals for the procurement of seven F-16 cable assembly stock numbers. Key details include:
-
The solicitation will include seven National Stock Numbers for F-16 cable assemblies, with multiple contract line items for each including first article production, full rate production, and data requirements.
-
Total quantities required across the seven part numbers are provided. Proposals are due by 30 April 2021. The procurement is a small business set-aside reserved for prequalified sources only.
-
The Department of the Air Force Materiel Command Air Force Sustainment Center is the contracting agency. The solicitation requires compliance with counterfeit prevention standards and item unique identification marking specifications.
View the file
Other files for this federal contract opportunity
Show all 50
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
REV: ENGINEERING DATA REQUIREMENTS
(ATTACHMENT “A”)
NOTE: MILITARY SPECIFICATIONS / STANDARDS WILL NOT BE FURNISHED IN THE BID SET.
1.THE FOLLOWING INSTRUCTIONS ARE FURNISHED FOR THE MANUFACTURE OF:
Cable
2. PART NUMBER:
8389761-1
3. NATIONAL STOCK NUMBER:
6150-01-555-8898
PREPARED BY:
Curtis Blanco
OFFICE SYMBOL:
416 SCMS / GUEAA
DATE:
15Nov2018
HILL AFB FORM 462 Page 1 of 1
Deviations from specifications identified in drawings or this document are not authorized without prior approval by 416 SCMS/GUEAA Engineering.
IUID (Item Unique Identifier) requirements and expectations which the contractor must ensure are complied with.
a. Contractors drawings shall be changed or supplemented by contractor for IUID compliance.
b.. Label shall contain all data on existing label, (if existing label is to be replaced), only delete existing label with government engineering permission.
c. Use HRI (Human Readable) and Machine Readable Matrix. (USAF not equiped to read barcode).
d. IUID Matrix needs to be highly visible, in a location easily accessible.
e. IUID marking must be permanent.
f. MIL-STD-130, ISO 15434, ISO 15415, and ISO 15418, (Part Marking as per MIL-STD-130 in lieu of FPS-3008)
i. IUID marking specifications.
1. Minimum 1/8 inch lettering on Human readable to include:
a. Cage (17V)
b. P/N (1P)
c. Serial Number (IS)
2. Minimum 1/4 inch square on Machine Readable 2D Matrix -construct 2 - to include
a. Cage (17V)
b. P/N (1P)
c. Serial Number (IS)
File details come from the government source that posted it. Updated .