Engineering Data Requirements (Attachment A) 6150015559788WF.pdf
PDF 14 KB Posted
- Attached to
- F-16 Cable Assemblies Federal contract opportunity
- Solicitation number
- FA8212-21-R-0002
About this file
This document contains engineering data requirements for an F-16 cable assembly and details of a related federal contract opportunity notice. The engineering data requirements provide specifications for item unique identification marking that must be applied to the cable assembly. This includes human and machine readable marking with size, location and content requirements.
The federal contract opportunity is a solicitation to procure F-16 cable assemblies as a small business set-aside. The Air Force Sustainment Center is seeking these cable assemblies with a total estimated quantity of 69. The solicitation will include line items for each of seven national stock numbers for production assets, first article assets, and data. First article deliveries are due 180 days after contract award. The anticipated award date is 30 April 2021 and the solicitation is restricted to prequalified sources who must submit a source approval request.
View the file
Other files for this federal contract opportunity
Show all 50
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
REV: ENGINEERING DATA REQUIREMENTS
(ATTACHMENT “A”)
NOTE: MILITARY SPECIFICATIONS / STANDARDS WILL NOT BE FURNISHED IN THE BID SET.
1.THE FOLLOWING INSTRUCTIONS ARE FURNISHED FOR THE MANUFACTURE OF:
CABLE ASSEMBLY,SPECIAL PURPOSE,ELECTRICAL
2. PART NUMBER:
3107620P002
3. NATIONAL STOCK NUMBER:
6150-01-555-9788
PREPARED BY:
Tim Lucas
OFFICE SYMBOL:
416 SCMS / GUEAA
DATE:
31 May 2018
HILL AFB FORM 462 Page 1 of 1
4. Deviations from specifications identified in drawings or this document are not authorized without prior approval by 416 SCMS/GUEAA Engineering.
5. IUID (Item Unique Identifier) requirements and expectations which the contractor must ensure are complied with.
a. Contractors drawings shall be changed or supplemented by contractor for IUID compliance.
b. Label shall contain all data on existing label, (if existing label is to be replaced), only delete existing label with government engineering permission.
c. Use HRI (Human Readable) and Machine Readable Matrix. (USAF not equipped to read barcode).
d. IUID Matrix needs to be highly visible, in a location easily accessible.
e. IUID marking must be permanent.
f. MIL-STD-130, ISO 15434, ISO 15415, and ISO 15418, (Part Marking as per MIL-STD-130 in lieu of FPS-3008)
i. IUID marking specifications.
1. Minimum 1/8 inch lettering on Human readable to include:
a. Cage (17V)
b. P/N (1P)
c. Serial Number (IS)
2. Minimum 1/4 inch square on Machine Readable 2D Matrix -construct 2 - to include
a. Cage (17V)
b. P/N (1P)
c. Serial Number (IS)
6. Part Marking as per MIL-STD-130 in lieu of FPS-3008.
File details come from the government source that posted it. Updated .