SF_30_CGC_WEDGE_AMENDMENT_4-17-2017.pdf

Offers must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended, by one of the following methods:

(a) By completing items 8 and 15, and returning or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN REJECTION OF YOUR OFFER. If by virtue of this amendment your desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

E. IMPORTANT: Contractor is not, is required to sign this document and return copies to the issuing office.

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT 1. CONTRACT ID CODE

2. AMENDMENT/MODIFICATION NO. 3. EFFECTIVE DATE 4. REQUISITION/PURCHASE REQ. NO. 5. PROJECT NO. (If applicable)

7. ADMINISTERED BY (If other than Item 6) CODE

STANDARD FORM 30 (REV. 10-83)

Prescribed by GSA FAR (48 CFR) 53.243

FACILITY CODE

9A. AMENDMENT OF SOLICITATION

NO.

9B. DATED (SEE ITEM 11)

10A. MODIFICATION OF CONTRACT/ORDER NO.

10B. DATED (SEE ITEM 13)

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offers is extended, is not extended.

12. ACCOUNTING AND APPROPRIATION DATA (If required) copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

13. THIS ITEM ONLY APPLIES TO MODIFICATION OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

CHECK ONE A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE CONTRACT ORDER NO.

IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation date, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(b).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15C. DATE SIGNED

15A. NAME AND TITLE OF SIGNER (Type or print)

16C. DATE SIGNED

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

PAGE OF PAGES

6. ISSUED BY CODE

8. NAME AND ADDRESS OF CONTRACTOR (No., street, county, State and ZIP Code) (X)

CODE

15B. CONTRACTOR/OFFEROR

(Signature of person authorized to sign)

16B. UNITED STATES OF AMERICA

(Signature of Contracting Officer)

NSN 7540-01-152-8070

Previous edition unusable

HSCG85-17-Q-P45B85

USCGC WEDGE AND BARGE DRYDOCK REPAIR

Amendment 0001

1. Work Item 42 states inspect and repair hull plating.

3.3.2 states take 300 UT’s in locations designated by the CG inspector and chalk out boundary of hull plating….Submit a CFR with a map.

The “locations” on the map cannot be determined until UT’s are accomplished; however, 3.3.4 states renew hull greater than 4SF (approx. 150 SF total)

QUESTION: Areas in A-J are more than 150 SF, where will the 150 SF of plate be renewed?

ANSWER: Table 1 “Work Locations” reflects areas of known wastage where hull plating renew or welding in lieu of plate renewal will be the corrective action. The exact location and extent or wastage will be determined by the UT shot data. With this in mind, Work Item 42 is titled “Hull Plating, Repair” with intent for the contract to Inspect and Repair the hull plating.

2. Some Intereferences may or may not be extreme depending on location.

QUESTION: Will interferences be addressed by CFR/CR due to the fact that the “locations” designated in 3.3.2 cannot be determined until after award and CG designates where to take the UT shots?

ANSWER: Recommend contractor bid on hull plate renewal of approximately 150 Sq Ft in areas shown in Figure 1, and take into account all the intereferences listed in Table 1.

3. The specs for work items #17 and #18 call for a salt water coating system with top coats of copper ablative paint. The last two times this vessel was done the coating system was specified as salt water but was changed to fresh water system.

CLARIFICATION: Please confirm whether the CG wants the salt water coating system to be used.

ANSWER: The specification for WEDGE DD FY17 for work items #17 and #18 is correct, and will remain unchanged.

Prepare and coat the U/W hull surfaces with the system specified for “Underwater (U/W) Body and Boot-Top (U/W Body and Boot-Top, Steel Hulls (Up to 7 Years), in Salt Water”, in SFLC Std Spec 6310, Appendix A (Cutter and Boat Exterior Painting Systems).

The Amendment provides responses to requests for clarifications. See following page.

SURFACE FORCES LOGISTICS

300 East Main Street, Suite 600 Norfolk, VA 23510

300 East Main Street, Suite 600 Norfolk, VA 23510