Questions_received_and_answers_(2).pdf

1. Do new wire runs for the ceiling mount glass breaks need to be in conduit from head end to device?

a. No.

2. Do we need to replace the wiring or can we use the existing if it meets the standards?

a. Use existing wire if no faults or defects appear in existing wiring.

3. Is the existing access software on the same server as the IDS and CCTV?

a. Yes

4. How many keypads are in the facility (disarming /arming) inclusive of the two keypads that will be in the HSDN Room and the Armory?

a. Building 290

i. 7 existing keypads

ii. Add 2 new key pads one outside|1 inside the HSDN room.

b. Building 291

i. 3 existing keypads

5. They are requesting a new server/controller for the IDS and CCTV systems, are the existing IDS and CCTV currently operating on one server?

a. Yes

6. With the new server/controller being added, do we need to update the CCTV software to install on the new server? There is no provision in the SOW to replace the CCTV software.

a. No

7. The SOW calls for the new server/controller for the IDS and CCTV systems, however the SOW is for IDS and we discussed the addition of at least one camera replacement in the hanger to a 360 degree camera and we additionally discussed the camera covering the HSDN room and the Armory. I am not clear if we decided the camera currently covering the entrance to the HSDN Room and the Armory had sufficient coverage, or if we need to add a camera. Will the government be amending the SOW to include the cameras needing to be added as there is no mention of cameras being added in the SOW

a. Disregard any extraneous comments made at the pre-bid site visit. Follow the Statement of Work

8. We discussed the HSDN Room being a separate system not being controlled by the main building IDS system, should this be the same for the Armory?

a. The HSDN room and Armory are to be separate zones on the new IDS system.