Specification_Sheet_Veteran_Lapel_Pin_R05.pdf
PDF 73 KB Posted
- Attached to
- Vietnam War Veterans Lapel Pin
- Solicitation number
- HQ0034-15-T-0209
- Issued by
-
DOD Washington Headquarters Service
About this file
ATTACHMENT 2 DETAILS SPECIFICATION SHEET
View the file
Other files
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
30 January 2015
DETAIL SPECIFICATION SHEET
Vietnam War Veteran Lapel Pin
The requirements for acquiring the product described herein shall consist of this specification sheet and the issue of MIL-DTL-11484G.
OBVERSE REVERSE
MATERIAL: Red Brass 85/15 (UNS Alloy No. C-230)
FINISH: Epoxy resin, Brass, Oxidized, Buffed Relieved and shall match the Institute of Heraldry (TIOH) Metal Finish Chip Number 4.
DIMENSIONS:
DIAMETER: 7/8 inch (REF)
THICKNESS: 0.0785 + .010 inch
ATTACHING DEVICE:
1. The attaching device shall be a 5/16 inch prong with pick and wing type clutch.
2. The prong will be centered on the vertical and horizontal center lines, on the reverse side and fused or soldered to the lapel button.
Vietnam War Veteran Lapel Pin
EPOXY: Epoxy resin shall be applied to the Lapel Pin as indicated above, and shall match TIOH Hard Enamel Color Chip Number 20 (blue). Hard cloisonné enamel may be used in lieu of epoxy.
NOTES:
1: The term (REF) refers to the measurements taken from the Government furnished hub or die.
2: A hub and die have been created for the reverse side and will be provided along with the hub and die for the obverse side.
Custodian Vietnam War Commemoration Preparing activity Vietnam War Commemoration Review activity Vietnam War Commemoration
File details come from the government source that posted it. Updated .