Attachments_1.pdf

ActFsc ActNiin Part Number NOUN Buy/Rep air

FY20

Contract Rep Qty

FY21

Contrac t Rep Qty

FY22

Contrac t Rep Qty

FY23

Contract Rep Qty

FY24

Contract Rep Qty

FY25

Contrac t Rep Qty

FY26

Contract Rep Qty

5998 001342121NT 608‐8827‐004 CIRCUIT CARD ASSEMB Repair 1 5 5 4 5 5 5 5998 010128716NT 608‐8821‐004 CIRCUIT CARD ASSEMB Repair 18 12 11 10 11 7 6 5998 002767505NT 608‐8828‐002 CIRCUIT CARD ASSEMB Repair 13 9 10 8 6 6 5 5998 002767507NT 608‐8823‐002 CIRCUIT CARD ASSEMB Repair 6 8 6 6 5 7 7 5998 002767503NT 608‐8826‐002 CIRCUIT CARD ASSEMB Repair 3 5 4 3 5 5 5 5826 013681538FW 622‐7798‐005 RECEIVER‐TRANSMITTE Repair 1 1 2 3 2 1 2 7021 010164162BY 622‐1400‐001 CONTROL,INDICATOR Repair 18 3 3 3 2 3 5 5895 013250150SO 622‐9470‐001 INTERFACE UNIT,COMM Repair 14 10 2 5 1 5 5 5895 013233648SO 622‐9471‐001 INTERFACE UNIT,COMM Repair 8 1 1 1 1 1 1 5998 010865323NT 608‐8822‐005 CIRCUIT CARD ASSEMB Repair 15 11 8 9 9 8 8 5826 013842173FW DAA3376P002‐ RECEIVER‐TRANSMITTE Repair 4 5 4 4 4 4 4 5821 013820706BY 622‐6130‐077 RECEIVER‐TRANSMITTE Repair 8 12 10 10 10 11 11 5985 013688340FW 622‐7799‐004 COUPLER,ANTENNA Repair 5 5 5 3 5 4 5 5998 013791228BY 952‐0994‐066 CIRCUIT CARD ASSEMB Repair 29 30 28 29 29 11 13 5955 013717021MZ 277‐0679‐010 OSCILLATOR,CRYSTAL Repair 263 96 74 73 73 79 79 5821 014476014GA 622‐8149‐031 RECEIVER‐TRANSMITTE Repair 1 1 1 1 1 1 1 5831 014471276FW 622‐7838‐007 CONTROL,INTERCOMMUN Repair 2 3 1 2 2 2 2 5821 014451430 822‐1034‐001 RECEIVER‐TRANSMITTE Repair 15 13 12 14 14 13 12 5895 014337403AW 822‐1027‐001 INTERFACE UNIT,COMM Repair 6 6 5 5 7 5 5 5820 014313579FW 622‐7827‐100 RECEIVER‐TRANSMITTE Repair 3 4 3 4 3 4 3 5895 014585874EK 822‐0941‐001 CONTROL‐INDICATOR Repair 16 15 17 14 15 17 14 5826 014782375CX 622‐0902‐206 DIRECTION FINDER SE Repair 1 2 1 1 1 1 1 5895 015349024FX 119500‐19 CONTROL,INDICATOR Repair 41 34 42 35 37 35 33 1240 015168737FX 122110 REFLECTOR ASSEMBLY Repair 24 24 24 24 24 24 24 4931 014946768AY 135900‐69 TEST SET,HELMET UNI Repair 1 1 1 1 1 1 1 5826 014764555CX 822‐1424‐001 AIRCRAFT PERSONALIT Repair 1 1 1 1 1 1 1 5998 016275313FX 966‐3816‐001 CIRCUIT CARD ASSEMB Repair 94 95 96 96 92 87 89 1270 016269971FX 987‐0000‐226 HARMONIZATION ASSY Repair 138 138 137 143 129 130 129 5998 016269738FX 966‐3814‐001 CIRCUIT CARD ASSEMB Repair 212 304 398 494 582 650 715 5955 015712516MZ 277‐0679‐040 OSCILLATOR,CRYSTAL Repair 62 55 46 55 53 54 52 5865 015485429EW 200622682‐10 CONTROL,DISPENSER,C Repair 12 15 14 13 14 14 14 5998 016275316FX 966‐3818‐002 CIRCUIT CARD ASSEMB Repair 68 68 68 70 64 63 63

6130 016269365FX 987‐0000‐215 POWER SUPPLY Repair 157 175 177 180 167 163 164 5960 012361169FX 114050‐9B ELECTRON TUBE Repair 109 111 112 114 106 104 104 6615 010377780 792‐6781‐003 SERVO UNIT Repair 16 15 18 17 18 16 17 5821 010306608NT 618‐4349‐001 RECEIVER SUBASSEMBL Repair 5 2 1 1 1 1 1 6605 013961587SO 622‐9455‐003 CONTROL UNIT,NAVIGA Repair 1 1 1 1 1 1 1 6625 015602531MZ AR‐61A‐08‐01 FREQUENCY STANDARD Repair 15 9 7 8 7 8 7 5975 014327267CW 622‐5133‐402 MOUNTING BASE,ELECT Buy 19 7 5 11 11 11 11 5821 015675713FX 822‐2265‐001 RECEIVER‐TRANSMITTE Buy 1 1 8 4 4 4 4 5998 011933137BY 651‐0244‐001 CIRCUIT CARD ASSEMB Buy 21 4 3 10 10 10 10 1240 015168737FX 122110‐69 REFLECTOR ASSEMBLY Buy 29 28 59 39 39 39 39 5998 013356809FX 122220‐19A CIRCUIT CARD ASSEMB Buy 1 2 1 2 2 2 2

GFP Attachment Status: Saved via Web

GFP Attachment Information:

Solicitation Information:

Serialized Item(s):

Non-Serially Managed Item(s):

Attachment Description Attachment Number Attachment Date Solicitation 1 2018-11-21

Solicitation Number

FD206018R0861

Program Title Rockwell Collins 2020 Comments

Non-Serialized Item - Line Number: 1 Item Name Item

Description NSN CAGE Code Part Number Model

Number Antenna Control Sub

Antenna Control Sub

598501432421

Quantity Unit Of Measure Unit Acquisition Cost Use As-Is 56 Each 37588.00 true Delivery Date Duration Time Unit Delivery Event Notes

Non-Serialized Item - Line Number: 2 Item Name Item

Description NSN CAGE Code Part Number Model

Number Radar Set Control

Radar Set Control

584101432379

Quantity Unit Of Measure Unit Acquisition Cost Use As-Is 99 Each 13529.00 true Delivery Date Duration Time Unit Delivery Event Notes

Non-Serialized Item - Line Number: 3 Item Name Item

Description NSN CAGE Code Part Number Model

Number Receiver Transmitter

Receiver Transmitter

584101432379

Quantity Unit Of Measure Unit Acquisition Cost Use As-Is 179 Each 156741.00 true Delivery Date Duration Time Unit Delivery Event Notes

Non-Serialized Item - Line Number: 4 Item Name Item

Description NSN CAGE Code Part Number Model

Number Band Pass Filter

Band Pass Filter

591501153991

Quantity Unit Of Measure Unit Acquisition Cost Use As-Is 13 Each 17262.00 true Delivery Date Duration Time Unit Delivery Event Notes

Non-Serialized Item - Line Number: 5 Item Name Item

Description NSN CAGE Code Part Number Model

Number Antenna Subassembly

Antenna Subassembly

598501432380

Quantity Unit Of Measure Unit Acquisition Cost Use As-Is 13 Each 15863.00 true Delivery Date Duration Time Unit Delivery Event Notes

Non-Serialized Item - Line Number: 6 Item Name Item

Description NSN CAGE Code Part Number Model

Number Band Pass Filter

Band Pass Filter

591501447451

Quantity Unit Of Measure Unit Acquisition Cost Use As-Is 11 Each 17262.00 true

Non-Serialized Item - Line Number: 7

Description NSN CAGE Code Part Number Model

Number Control Display Unit

Control Display Unit

661001444095

Quantity Unit Of Measure Unit Acquisition Cost Use As-Is 260 Each 40966.00 true Delivery Date Duration Time Unit Delivery Event Notes

Non-Serialized Item - Line Number: 8 Item Name Item

Description NSN CAGE Code Part Number Model

Number Radar Display Control

Radar Display Control

584101470143

Quantity Unit Of Measure Unit Acquisition Cost Use As-Is 164 Each 6873.00 true Delivery Date Duration Time Unit Delivery Event Notes

Non-Serialized Item - Line Number: 9 Item Name Item

Description NSN CAGE Code Part Number Model

Number Data Receptacle

Data Receptacle

660501450271

Quantity Unit Of Measure Unit Acquisition Cost Use As-Is 95 Each 11528.00 true Delivery Date Duration Time Unit Delivery Event Notes

Non-Serialized Item - Line Number: 10 Item Name Item

Description NSN CAGE Code Part Number Model

Number Radio Set Control

Radio Set Control

582101445277

Quantity Unit Of Measure Unit Acquisition Cost Use As-Is 18 Each 7155.00 true

Non-Serialized Item - Line Number: 11

Description NSN CAGE Code Part Number Model

Number Computer Subassembly

Computer Subassembly

661001501360

Quantity Unit Of Measure Unit Acquisition Cost Use As-Is 20 Each 36926.00 true Delivery Date Duration Time Unit Delivery Event Notes

Non-Serialized Item - Line Number: 12 Item Name Item

Description NSN CAGE Code Part Number Model

Number Radio Set Control

Radio Set Control

582601476778

Quantity Unit Of Measure Unit Acquisition Cost Use As-Is 44 Each 39048.00 true Delivery Date Duration Time Unit Delivery Event Notes

Non-Serialized Item - Line Number: 13 Item Name Item

Description NSN CAGE Code Part Number Model

Number Receiver Transmitter

Receiver Transmitter

582101476409

Quantity Unit Of Measure Unit Acquisition Cost Use As-Is 40 Each 124049.00 true Delivery Date Duration Time Unit Delivery Event Notes

Non-Serialized Item - Line Number: 14 Item Name Item

Description NSN CAGE Code Part Number Model

Number Antenna Antenna 598501484176

Quantity Unit Of Measure Unit Acquisition Cost Use As-Is 97 Each 45133.00 true

Non-Serialized Item - Line Number: 15

Description NSN CAGE Code Part Number Model

Number Power Supply Power Supply 613001501530

Quantity Unit Of Measure Unit Acquisition Cost Use As-Is 36 Each 27436.00 true Delivery Date Duration Time Unit Delivery Event Notes

Non-Serialized Item - Line Number: 16 Item Name Item

Description NSN CAGE Code Part Number Model

Number Circuit Card Assembly

Circuit Card Assembly

599801512026

Quantity Unit Of Measure Unit Acquisition Cost Use As-Is 19 Each 99444.09 true Delivery Date Duration Time Unit Delivery Event Notes

Non-Serialized Item - Line Number: 17 Item Name Item

Description NSN CAGE Code Part Number Model

Number Computer Subassembly

Computer Subassembly

661001502035

Quantity Unit Of Measure Unit Acquisition Cost Use As-Is 291 Each 47784.00 true Delivery Date Duration Time Unit Delivery Event Notes

Non-Serialized Item - Line Number: 18 Item Name Item

Description NSN CAGE Code Part Number Model

Number Satellite Receiving Set

Satellite Receiving Set

589501507388

Quantity Unit Of Measure Unit Acquisition Cost Use As-Is 101 Each 63404.00 true

Non-Serialized Item - Line Number: 19

Description NSN CAGE Code Part Number Model

Number Radar Display Unit

Radar Display Unit

584101504558

Quantity Unit Of Measure Unit Acquisition Cost Use As-Is 644 Each 27265.00 true Delivery Date Duration Time Unit Delivery Event Notes

Non-Serialized Item - Line Number: 20 Item Name Item

Description NSN CAGE Code Part Number Model

Number Data Interface Unit

Data Interface Unit

702501525611

Quantity Unit Of Measure Unit Acquisition Cost Use As-Is 234 Each 20825.00 true Delivery Date Duration Time Unit Delivery Event Notes

Non-Serialized Item - Line Number: 21 Item Name Item

Description NSN CAGE Code Part Number Model

Number Circuit Card Assembly

Circuit Card Assembly

599801549760

Quantity Unit Of Measure Unit Acquisition Cost Use As-Is 20 Each 12625.00 true Delivery Date Duration Time Unit Delivery Event Notes

Non-Serialized Item - Line Number: 22 Item Name Item

Description NSN CAGE Code Part Number Model

Number Radio Set Control

Radio Set Control

582101545295

Quantity Unit Of Measure Unit Acquisition Cost Use As-Is 3 Each 13600.00 true

Non-Serialized Item - Line Number: 23

Description NSN CAGE Code Part Number Model

Number Receiver Transmitter

Receiver Transmitter

582101533360

Quantity Unit Of Measure Unit Acquisition Cost Use As-Is 56 Each 52725.00 true Delivery Date Duration Time Unit Delivery Event Notes

Non-Serialized Item - Line Number: 24 Item Name Item

Description NSN CAGE Code Part Number Model

Number Computer Subassembly

Computer Subassembly

661001607824

Quantity Unit Of Measure Unit Acquisition Cost Use As-Is 394 Each 40967.00 true Delivery Date Duration Time Unit Delivery Event Notes

Non-Serialized Item - Line Number: 25 Item Name Item

Description NSN CAGE Code Part Number Model

Number Control Indicator

Control Indicator

589501493713

Quantity Unit Of Measure Unit Acquisition Cost Use As-Is 79 Each 108434.00 true Delivery Date Duration Time Unit Delivery Event Notes

Non-Serialized Item - Line Number: 26 Item Name Item

Description NSN CAGE Code Part Number Model

Number Fast Character Tool

Fast Character Tool

492001565432

Quantity Unit Of Measure Unit Acquisition Cost Use As-Is 3 Each 297799.00 true

Non-Serialized Item - Line Number: 27

Description NSN CAGE Code Part Number Model

Number Fast Character Tool

Fast Character Tool

492001571197

Quantity Unit Of Measure Unit Acquisition Cost Use As-Is 5 Each 328217.00 true Delivery Date Duration Time Unit Delivery Event Notes

Non-Serialized Item - Line Number: 28 Item Name Item

Description NSN CAGE Code Part Number Model

Number Receiver Transmitter

Receiver Transmitter

582101567571

Quantity Unit Of Measure Unit Acquisition Cost Use As-Is 56 Each 52725.00 true Delivery Date Duration Time Unit Delivery Event Notes

Non-Serialized Item - Line Number: 29 Item Name Item

Description NSN CAGE Code Part Number Model

Number Computer Subassembly

Computer Subassembly

661001501360

Quantity Unit Of Measure Unit Acquisition Cost Use As-Is 291 Each 40967.90 true Delivery Date Duration Time Unit Delivery Event Notes

Non-Serialized Item - Line Number: 30 Item Name Item

Description NSN CAGE Code Part Number Model

Number Circuit Card Assembly

Circuit Card Assembly

599800134212

Quantity Unit Of Measure Unit Acquisition Cost Use As-Is 5 Each 1752.50 true

Non-Serialized Item - Line Number: 31

Description NSN CAGE Code Part Number Model

Number Circuit Card Assembly

Circuit Card Assembly

599801012871

Quantity Unit Of Measure Unit Acquisition Cost Use As-Is 18 Each 6361.95 true Delivery Date Duration Time Unit Delivery Event Notes

Non-Serialized Item - Line Number: 32 Item Name Item

Description NSN CAGE Code Part Number Model

Number Circuit Card Assembly

Circuit Card Assembly

599800276750

Quantity Unit Of Measure Unit Acquisition Cost Use As-Is 13 Each 2202.48 true Delivery Date Duration Time Unit Delivery Event Notes

Non-Serialized Item - Line Number: 33 Item Name Item

Description NSN CAGE Code Part Number Model

Number Circuit Card Assembly

Circuit Card Assembly

599800276750

Quantity Unit Of Measure Unit Acquisition Cost Use As-Is 6 Each 2062.64 true Delivery Date Duration Time Unit Delivery Event Notes

Non-Serialized Item - Line Number: 34 Item Name Item

Description NSN CAGE Code Part Number Model

Number Circuit Card Assembly

Circuit Card Assembly

599800276750

Quantity Unit Of Measure Unit Acquisition Cost Use As-Is 3 Each 2184.39 true

Non-Serialized Item - Line Number: 35

Description NSN CAGE Code Part Number Model

Number Receiver Transmitter

Receiver Transmitter

582601368153

Quantity Unit Of Measure Unit Acquisition Cost Use As-Is 1 Each 184898.13 true Delivery Date Duration Time Unit Delivery Event Notes

Non-Serialized Item - Line Number: 36 Item Name Item

Description NSN CAGE Code Part Number Model

Number Indicator Control

Indicator Control

702101016416

Quantity Unit Of Measure Unit Acquisition Cost Use As-Is 18 Each 22959.98 true Delivery Date Duration Time Unit Delivery Event Notes

Non-Serialized Item - Line Number: 37 Item Name Item

Description NSN CAGE Code Part Number Model

Number Communicatio n Interface Unit

Communicatio n Interface Unit

589501325015

Quantity Unit Of Measure Unit Acquisition Cost Use As-Is 14 Each 114369.07 true Delivery Date Duration Time Unit Delivery Event Notes

Non-Serialized Item - Line Number: 38 Item Name Item

Description NSN CAGE Code Part Number Model

Number Communicatio n Interface Unit

Communicatio n Interface Unit

589501323364

Quantity Unit Of Measure Unit Acquisition Cost Use As-Is 8 Each 114023.73 true

Non-Serialized Item - Line Number: 39

Description NSN CAGE Code Part Number Model

Number Circuit Card Assembly

Circuit Card Assembly

599801086532

Quantity Unit Of Measure Unit Acquisition Cost Use As-Is 15 Each 5413.66 true Delivery Date Duration Time Unit Delivery Event Notes

Non-Serialized Item - Line Number: 40 Item Name Item

Description NSN CAGE Code Part Number Model

Number Receiver Transmitter

Receiver Transmitter

582601384217

Quantity Unit Of Measure Unit Acquisition Cost Use As-Is 4 Each 132636.78 true Delivery Date Duration Time Unit Delivery Event Notes

Non-Serialized Item - Line Number: 41 Item Name Item

Description NSN CAGE Code Part Number Model

Number Receiver Transmitter

Receiver Transmitter

582101382070

Quantity Unit Of Measure Unit Acquisition Cost Use As-Is 8 Each 279528.00 true Delivery Date Duration Time Unit Delivery Event Notes

Non-Serialized Item - Line Number: 42 Item Name Item

Description NSN CAGE Code Part Number Model

Number Antenna Coupler

Antenna Coupler

598501368834

Quantity Unit Of Measure Unit Acquisition Cost Use As-Is 5 Each 81321.24 true

Non-Serialized Item - Line Number: 43

Description NSN CAGE Code Part Number Model

Number Circuit Card Assembly

Circuit Card Assembly

599801379122

Quantity Unit Of Measure Unit Acquisition Cost Use As-Is 29 Each 24696.58 true Delivery Date Duration Time Unit Delivery Event Notes

Non-Serialized Item - Line Number: 44 Item Name Item

Description NSN CAGE Code Part Number Model

Number Crystal Oscillator

Crystal Oscillator

595501371702

Quantity Unit Of Measure Unit Acquisition Cost Use As-Is 263 Each 3180.00 true Delivery Date Duration Time Unit Delivery Event Notes

Non-Serialized Item - Line Number: 45 Item Name Item

Description NSN CAGE Code Part Number Model

Number Receiver Transmitter

Receiver Transmitter

582101447601

Quantity Unit Of Measure Unit Acquisition Cost Use As-Is 1 Each 74930.11 true Delivery Date Duration Time Unit Delivery Event Notes

Non-Serialized Item - Line Number: 46 Item Name Item

Description NSN CAGE Code Part Number Model

Number Intercommunic ation Control

Intercommunic ation Control

583101447127

Quantity Unit Of Measure Unit Acquisition Cost Use As-Is 2 Each 129304.37 true

Non-Serialized Item - Line Number: 47

Description NSN CAGE Code Part Number Model

Number Receiver Transmitter

Receiver Transmitter

582101445143

Quantity Unit Of Measure Unit Acquisition Cost Use As-Is 12 Each 73166.01 true Delivery Date Duration Time Unit Delivery Event Notes

Non-Serialized Item - Line Number: 48 Item Name Item

Description NSN CAGE Code Part Number Model

Number Communicatio n Interface Unit

Communicatio n Interface Unit

589501433740

Quantity Unit Of Measure Unit Acquisition Cost Use As-Is 6 Each 44274.38 true Delivery Date Duration Time Unit Delivery Event Notes

Non-Serialized Item - Line Number: 49 Item Name Item

Description NSN CAGE Code Part Number Model

Number Receiver Transmitter

Receiver Transmitter

582001431357

Quantity Unit Of Measure Unit Acquisition Cost Use As-Is 3 Each 277988.85 true Delivery Date Duration Time Unit Delivery Event Notes

Non-Serialized Item - Line Number: 50 Item Name Item

Description NSN CAGE Code Part Number Model

Number Control Indicator

Control Indicator

589501458587

Quantity Unit Of Measure Unit Acquisition Cost Use As-Is 16 Each 45800.89 true

Non-Serialized Item - Line Number: 51

Description NSN CAGE Code Part Number Model

Number Direction Finder Se

Direction Finder Se

582601478237

Quantity Unit Of Measure Unit Acquisition Cost Use As-Is 1 Each 18869.31 true Delivery Date Duration Time Unit Delivery Event Notes

Non-Serialized Item - Line Number: 52 Item Name Item

Description NSN CAGE Code Part Number Model

Number Indicator Control

Indicator Control

589501534902

Quantity Unit Of Measure Unit Acquisition Cost Use As-Is 41 Each 89325.00 true Delivery Date Duration Time Unit Delivery Event Notes

Non-Serialized Item - Line Number: 53 Item Name Item

Description NSN CAGE Code Part Number Model

Number Reflector Assembly

Reflector Assembly

124001516873

Quantity Unit Of Measure Unit Acquisition Cost Use As-Is 24 Each 228305.57 true Delivery Date Duration Time Unit Delivery Event Notes

Non-Serialized Item - Line Number: 54 Item Name Item

Description NSN CAGE Code Part Number Model

Number Helmet Unit Test Set

Helmet Unit Test Set

493101494676

Quantity Unit Of Measure Unit Acquisition Cost Use As-Is 1 Each 73156.00 true

Non-Serialized Item - Line Number: 55

Description NSN CAGE Code Part Number Model

Number Aircraft Personalit

Aircraft Personalit

582601476455

Quantity Unit Of Measure Unit Acquisition Cost Use As-Is 1 Each 4452.59 true Delivery Date Duration Time Unit Delivery Event Notes

Non-Serialized Item - Line Number: 56 Item Name Item

Description NSN CAGE Code Part Number Model

Number Circuit Card Assembly

Circuit Card Assembly

599801627531

Quantity Unit Of Measure Unit Acquisition Cost Use As-Is 94 Each 11342.47 true Delivery Date Duration Time Unit Delivery Event Notes

Non-Serialized Item - Line Number: 57 Item Name Item

Description NSN CAGE Code Part Number Model

Number Harmonization Assembly

Harmonization Assembly

127001626997

Quantity Unit Of Measure Unit Acquisition Cost Use As-Is 138 Each 29832.92 true Delivery Date Duration Time Unit Delivery Event Notes

Non-Serialized Item - Line Number: 58 Item Name Item

Description NSN CAGE Code Part Number Model

Number Circuit Card Assembly

Circuit Card Assembly

599801626973

Quantity Unit Of Measure Unit Acquisition Cost Use As-Is 212 Each 14169.26 true

Non-Serialized Item - Line Number: 59

Description NSN CAGE Code Part Number Model

Number Crystal Oscillator

Crystal Oscillator

595501571251

Quantity Unit Of Measure Unit Acquisition Cost Use As-Is 62 Each 3478.92 true Delivery Date Duration Time Unit Delivery Event Notes

Non-Serialized Item - Line Number: 60 Item Name Item

Description NSN CAGE Code Part Number Model

Number Dispenser Control

Dispenser Control

586501548542

Quantity Unit Of Measure Unit Acquisition Cost Use As-Is 12 Each 61954.65 true Delivery Date Duration Time Unit Delivery Event Notes

Non-Serialized Item - Line Number: 61 Item Name Item

Description NSN CAGE Code Part Number Model

Number Circuit Card Assembly

Circuit Card Assembly

599801627531

Quantity Unit Of Measure Unit Acquisition Cost Use As-Is 68 Each 12219.53 true Delivery Date Duration Time Unit Delivery Event Notes

Non-Serialized Item - Line Number: 62 Item Name Item

Description NSN CAGE Code Part Number Model

Number Power Supply Power Supply 613001626936

Quantity Unit Of Measure Unit Acquisition Cost Use As-Is 175 Each 24447.71 true

Non-Serialized Item - Line Number: 63

Description NSN CAGE Code Part Number Model

Number Electron Tube Electron Tube 596001236116

Quantity Unit Of Measure Unit Acquisition Cost Use As-Is 109 Each 27339.20 true Delivery Date Duration Time Unit Delivery Event Notes

Non-Serialized Item - Line Number: 64 Item Name Item

Description NSN CAGE Code Part Number Model

Number Servo Unit Servo Unit 661501037778

Quantity Unit Of Measure Unit Acquisition Cost Use As-Is 16 Each 7146.40 true Delivery Date Duration Time Unit Delivery Event Notes

Non-Serialized Item - Line Number: 65 Item Name Item

Description NSN CAGE Code Part Number Model

Number Receiver Subassembly

Receiver Subassembly

582101030660

Quantity Unit Of Measure Unit Acquisition Cost Use As-Is 5 Each 6187.73 true Delivery Date Duration Time Unit Delivery Event Notes

Non-Serialized Item - Line Number: 66 Item Name Item

Description NSN CAGE Code Part Number Model

Number Navigation Control Unit

Navigation Control Unit

660501396158

Quantity Unit Of Measure Unit Acquisition Cost Use As-Is 1 Each 65076.24 true

Non-Serialized Item - Line Number: 67

Description NSN CAGE Code Part Number Model

Number Frequency Standard

Frequency Standard

662501560253

Quantity Unit Of Measure Unit Acquisition Cost Use As-Is 15 Each 24900.86 true Delivery Date Duration Time Unit Delivery Event Notes

Non-Serialized Item - Line Number: 68 Item Name Item

Description NSN CAGE Code Part Number Model

Number Elect Mounting Base

Elect Mounting Base

597501432726

Quantity Unit Of Measure Unit Acquisition Cost Use As-Is 19 Each 7690.17 true Delivery Date Duration Time Unit Delivery Event Notes

Non-Serialized Item - Line Number: 69 Item Name Item

Description NSN CAGE Code Part Number Model

Number Receiver Transmitter

Receiver Transmitter

582101567571

Quantity Unit Of Measure Unit Acquisition Cost Use As-Is 1 Each 60422.85 true Delivery Date Duration Time Unit Delivery Event Notes

Non-Serialized Item - Line Number: 70 Item Name Item

Description NSN CAGE Code Part Number Model

Number Circuit Card Assembly

Circuit Card Assembly

599801193313

Quantity Unit Of Measure Unit Acquisition Cost Use As-Is 21 Each 2699.06 true

Requisitioned Item(s):

Non-Serialized Item - Line Number: 71 Item Name Item

Description NSN CAGE Code Part Number Model

Number Reflector Assembly

Reflector Assembly

124001516873

Quantity Unit Of Measure Unit Acquisition Cost Use As-Is 29 Each 228305.57 true Delivery Date Duration Time Unit Delivery Event Notes

Non-Serialized Item - Line Number: 72 Item Name Item

Description NSN CAGE Code Part Number Model

Number Circuit Card Assembly

Circuit Card Assembly

599801335680

Quantity Unit Of Measure Unit Acquisition Cost Use As-Is 1 Each 8813.77 true

PR: FD2060-18-00861 & FD2060-18-01017

PWS REVISION: 0 1

Distribution Statement: D

Performance Work Statement for

Rockwell Collins Corporate Contract

(REPAIR, SUSTAINING ENGINEERING, & SPARES)

Purchase Requests: FD2060-18-00861 & FD2060-18-01017

03 October 2018

Distribution Statement D: Distribution authorized to Department of Defense and U.S. DoD contractors (Critical Technology) (22 Jan 2018). Other request for this document shall be referred to AFSC/PZAAB, Robins AFB, GA 31098-5365. Questions concerning technical content should be directed to 429 SCMS/GUMB.

WARNING - This document contains technical data whose export is restricted by the Arms Export Control Act (Title 22, U.S.C., Sec. 2751 et seq.) or the Export Administration Act 1979, as amended (Title 50, U.S.C., App. 2401 et seq.). Violators of these export laws are subject to severe criminal penalties.

HANDLING AND DESTRUCTION NOTICE - Comply with distribution statement and destroy by any method that will prevent disclosure of the contents or reconstruction of the document.

PWS REVISION: 0 2

1.0 Description of Services

1.1 Objective(s): This Performance-Based Work Statement (PWS) establishes two corporate contracts for repairs, spares, sustaining engineering and data applicable to the associated FAR Part 15 Non-commercial and FAR Part 12 Commercial National Stock Numbers (NSNs) identified in Appendix 2 & 3 of this document. The contractor shall ensure items meet the requirements in accordance with Government approved specifications and are provided to the Government in the desired time frame. These requirements will be divided into two long-term contracts (FAR 15/12) that will provide consolidated contract vehicles that will improve responsiveness to the warfighter demands and requirements.

1.1.1 Repair: The Contractor will provide labor and material necessary to perform the work effort required under this PWS to return all repairable end items to a serviceable condition in accordance with approved Government repair procedures.

1.1.2 Spares: Supplier will manufacture all items/materials in accordance with contract requirements and design documentation for items/materials required.

1.1.3 Sustaining engineering and Other Services: The Contractor shall provide engineering support for the relevant NSNs on an as-needed basis to the Government to include technical analysis, engineering proposals, redesigns, tests, meetings, and working groups. Sustaining engineering tasks will be accompanied by a standalone PWS and associated CDRLs.

1.2 Benefit to United States Air Force (USAF): This acquisition will benefit the USAF by providing greater flexibility, lower program cost, and optimization of sustainment. Enterprise wide focus of a single Original Equipment Manufacturer will increase a platform’s capability and survivability by providing the warfighter reliable sustainment of assets.

1.3 Background: These requirements (commercial and non-commercial) will be divided into two long-term contracts (FAR 15/12) that will provide improved responsiveness to the warfighter demands and requirements with a goal of optimizing overall asset availability for contractor supported items.

2.0 Services Summary

Services issued under this Corporate Contract will be required to meet the following objectives.

In addition, specific objectives can be added at the order level.

Performance Objective PWS Reference

Performance Threshold

Quality of repair

4.3.3, 4.3.3.1 Assets shall be repaired in accordance with Government approved specifications.

Contractor shall in no case exceed 5% Product Quality Deficiency Report (PQDR) per delivery

PWS REVISION: 0 3

order. Total Joint Deficiency Reporting System (JDRS) Validated PQDRs for all NSNs will be graded based on: 0<1% (Exceeded Metric), 1%<3% (Met Metric), 3% or greater (Failed to Meet Metric)

Delivery Schedule

4.3.9 Assets shall be delivered in accordance with the

schedule defined by the contract/order.

Contractor shall not exceed 5% late delivery rate per delivery order. The Contractor shall notify the Government if the delivery of any asset will not meet the scheduled delivery date, as defined on the master price list. The contractor shall negotiate a revised delivery schedule for each late asset that is acceptable to the Government.

CAV-AF reporting 4.4.8 The Contractor shall report production in CAV-AF.

The Contractor shall provide data on the actions conducted for each unit. The Contractor shall report as actions occur. No more than two late or incorrect entries shall be allowed per delivery order. Any delayed entries shall not exceed three business days.

Quality of Contract Data Requirements List (CDRL) deliverable

4.2.1 There shall be no more than one rejection of any

deliverable. There shall be no more than two total rejection(s) of deliverables per year. The Government will reject a deliverable if one or more technical errors or three or more minor errors are found within the deliverable. The rejected deliverable shall be corrected and resubmitted within ten business days of notification of Government rejection.

Receipt of CDRL deliverable

4.2.2 There shall be no more than one late submission of

deliverables per delivery order. The Contractor shall notify the Government if the delivery of any data/document will not meet the scheduled delivery date and negotiate a revised delivery date. The late data/document shall be delivered by the revised delivery date acceptable to the Government.

Request for assistance

(SURGE/MICAPS)

4.3.10 The contractor will use any means possible to

expedite the repair process to meet Government SURGE and MICAP requirements. For MICAP/SURGE requirements, Contractor shall propose a delivery schedule within 72 business hours after notification.

Proposal Submission 4.3.16.2 Contractor is allowed no more than two Untimely Proposals per ordering period

Contractor Manpower Reporting

5.7 Within 30 calendar days of contract/order award, the

Contractor shall establish a record for the

PWS REVISION: 0 4

contract/order in eCMRA including Order Data, Contact Data and Location Data.

The Contractor shall provide a count of contractor/subcontractor personnel performing services for each fiscal year and report all contractor/subcontractor labor hours required for performance of services for each fiscal year. All data shall be reported no later than October 31 of the following fiscal year.

Provide accurate technical status reports

4.3.12.4 The contractor shall submit status reports which are accurate and complete with no more than one technical error and no more than five minor errors.

Errors shall be corrected and the report shall be resubmitted to the COR NLT 7 calendar days after receipt of Government comments

Adherence to Contractor Quality Management System (QMS)

5.9 100% compliance with the QMS is required.

3.0 Government Property: Government property includes GFP, GFM, GFE, special tooling, special test equipment, etc. GFP includes assets furnished for repair, maintenance, overhaul or modification. Government property shall be dispositioned in accordance per the direction of the cognizant Government property administrator. Government property shall be dispositioned in accordance with the Government property plan or at the direction of the cognizant Government property administrator.

3.1. Contractor Responsibility: The Contractor shall be responsible for Government property in their possession in accordance with the Federal Acquisition Regulation (FAR) and applicable supplements including, but not limited to, FAR Part 45, Government Property; FAR 52.245-1, Government Property; and Defense Federal Acquisition Regulation Supplement (DFARS) Part 245, Government Property. The FAR and applicable supplements can be accessed at http://farsite.hill.af.mil.

3.2 Government Property to be Provided: Government property to be provided includes a list of non-stock listed GFP is contained in Appendix B (if applicable) of this document.

3.3 Reporting of Government Property: The Contractor shall create and maintain records of all Government property accountable to the contract/order. The Contractor shall record receipt and return of Government-Furnished Property (GFP). Government property shall be listed as a GFP attachment and is created as a fillable document at http://dodprocurementtoolbox.com/.

3.4. Reporting Loss of Government Property: (The Contractor shall use the Defense Contract Management Agency (DCMA) eTools. Additional information and definition of loss of Government property can be found in DFARS 252.245-7002. The eTools “LTDD of Government Property” toolset can be accessed from the DCMA home page External Web Access Management application at http://www.dcma.mil/aboutetools.cfm.

PWS REVISION: 0 5

3.5 Return or Retention of Government Property: All property provided by the Government remains the property of the Government and shall be returned to the Government as directed, but no later than completion of the contract/order, unless the Procuring Contracting Officer (PCO) directs the Contractor to retain the property for continued use under a successor contract. All Government property shall be returned to the Government in the condition provided unless approved in advance by the PCO. All material generated under the contract/order becomes the property of the Government and shall be returned to the Government as directed, but no later than completion of the contract/order, unless the PCO directs the Contractor to retain the material for continued use under a successor contract.

4.0 Technical Requirements

4.1 Period and Place of Performance

4.1.1 Contract/Order Period of Performance: The basic contract will align with the DLA parent contract and may have a POP of up to ten years.

4.1.2 Place of Performance: These services will be performed at the Contractor’s facility.

However, this does not preclude the contractor from using a Public-Private Partnership to execute contract requirements. Sustaining engineering services place of performance will be identified at task order level.

4.2 Contract Data Requirements List(s) (CDRL)

The below CDRLs will be applied to the basic contract. CDRLs associated with Sustaining Engineering will be applied to individual PWS on case by case basis.

Document Identifier

DID Title PWS Reference(s)

A001 DI-MGMT-81838 Commercial Asset Visibility Air Force (CAVAF) Reporting

4.4.8

A002 DI-MGMT-80368A Status Report 4.3.12.1, 4.3.12.4 A003 DI-PSSS-81534A Teardown Deficiency Report 4.3.3 A004 DI-NDTI-80809B Test/Inspection Report 4.3.8.2, 4.3.8.3 A005 DI-ENVR-81840 Programmatic Environmental Safety and Health

Evaluation (PESHE) Plan 5.5.3

A006 DI-SESS-80642D Notice Of Revision (NOR) 4.5.2.2 A007 DI-MGMT-81803 Item Unique Identification (IUID) Marking Plan 4.3.4.1 A008 DI-MISC-81832 Counterfeit Prevention Plan 4.3.18 A009 DI-MISC-80711A Scientific and Technical Reports 4.5.1 A010 DI-MGMT-82128 Contract Government Furnished material (GFM)

Requisition and Inventory Report 4.4.8

A011 DI-MGMT-80441C Government Property Inventory Report 4.4.8 A012 DI-PSSS-81995 Contract Depot Maintenance (CDM) Production

Report 4.4.8

PWS REVISION: 0 6

A013 DI-MGMT-81634C Commercial Asset Visibility Air Force (CAV)/Government Furnished Material Report

4.4.8

4.2.1 Quality of CDRL Deliverable: There shall be no more than one rejection of any deliverable. There shall be no more than two total rejection(s) of deliverables per year. The Government will reject a deliverable if one or more technical errors or three or more minor errors are found within the deliverable. A technical error is defined as the format not being in accordance with the CDRL or the content not being accurate and complete in accordance with the CDRL, PWS, or contract. A minor error is exemplified by a typographical error, a grammatical error, etc. The rejected deliverable shall be corrected and resubmitted within ten business days of notification of Government rejection.

4.2.2 Receipt of CDRL Deliverable: CDRL deliverables shall be submitted IAW CDRL requirements. There shall be no more than one late submission of deliverables per delivery order.

The Contractor shall notify the Government if the delivery of any data/document will not meet the scheduled delivery date and negotiate a revised delivery date. The late data/document shall be delivered by the revised delivery date acceptable to the Government.

4.3 General Requirements (applicable to all services)

4.3.1 Multi-Functional Teams (MFT): The Government and Contractor will use a MFT to manage and support the basic contract. After contract award, the designated Government MFT Program Manager and the contractor designated Program Manager will provide names, titles, responsibilities, and all appropriate contact information of each MFT member. This information must be kept current as there are specific functions that will be required by each MFT member that affect timely responses in support of this effort.

4.3.2 Government Data Rights: Unless otherwise prescribed elsewhere in this PWS or CDRL, the Contractor shall provide the Government unlimited or unrestricted rights to all Contractor developed technical data, drawings and software developed exclusively with Government funding for this contract. For items which are outsourced as the result of a Contractor make/buy decision, the Contractor will identify to the Government program team and contracting officer any subcontractor/supplier claim of proprietary data asserted with other than unlimited rights.

The Contractor shall provide the Government with Government Purpose Rights at a minimum for supplier developed technical data, and drawings developed exclusively with Government funding for this contract. The Contractor shall identify any proprietary hardware, drawings or data referring or relating to Government logistics support that has been developed at private expense. The Contractor shall provide the Government purpose license rights for logistical support if any proprietary hardware or drawings or data developed at private expense is used.

Any software licensed or developed internally for this contract shall be delivered to the Government with Government purpose license rights or unrestricted rights by the completion/termination of the contract. An index of all drawings and data developed under the contract shall be maintained and shall be made available to the procuring agency upon request.

PWS REVISION: 0 7

4.3.3 Product Quality Deficiency Report (PQDR) Process: The Government will use the PQDR process to return an item that was manufactured, repaired, or modified by the Contractor for which a quality problem is suspected. In the event that the Government determines the issuance of a PQDR is required:

a. The Government will notify the cognizant DCMA Representative of the pending PQDR.

This notification will include, but is not limited to: National Stock Number (NSN), Contractor Part Number, Serial Number, date of discrepancy, reason for discrepancy, and any other pertinent information related to the issuance of the PQDR.

b. DCMA will notify the appropriate Contractor quality representative of the pending PQDR and provide all information received in subparagraph “a” above.

c. The Government will ship the item to the Contractor facility as soon as possible after Contractor notification.

d. The Contractor shall perform all evaluations, tests, and analysis required to: confirm/non-confirm the stated discrepancy and actual failure mode; ascertain the applicable root cause and corrective action.

e. DCMA will submit the final report to the appropriate Government organization.

f. The Contractor shall return the asset to the Government in the condition received unless the Contractor is determined at fault for the deficiency. If at fault, the Contractor shall repair the item to a serviceable condition at no additional charge to the Government.

The Contractor shall report PQDR investigation findings. The Government will use the reports for entry into the Joint Discrepancy Reporting System (JDRS). The Contractor shall investigate PQDRs at no additional charge to the Government and the repair will not count against the BEQ for the ordering period. The validity of PQDRs shall be determined by DCMA. For PQDR matters involving conflicts between the Contractor and DCMA, the Government Contracting Officer will be the final decision authority. (CDRL A003, Teardown Deficiency Report DI-

PSSS-81534A).

4.3.3.1 Quality of Repair: Valid Product Quality Deficiency Reports (PQDRs) against the Contractor shall in no case exceed 5% per delivery order. Total % JDRS Validated PQDRs for all NSNs will be graded based on: 0<1% (Exceeded Metric), 1%<3% (Met Metric), 3% or greater (Failed to Meet Metric).

4.3.4 Item Unique Identification (IUID): The IUID Program requires each qualifying Air Force (AF) asset to be uniquely identified with a permanent marking that can sustain its information throughout the life of the asset. The program addresses two categories of assets—those already in the AF inventory and those currently under contract but not currently in the AF inventory. For assets under contract, IUID requirements are specified in Defense Federal Acquisition Regulation Supplement (DFARS) 252.211-7003, Item Identification and Valuation and Department of Defense (DoD) 4100.39-M, Federal Logistics Information System (FLIS). All assets subject to marking must be recorded in the DoD IUID Registry.

4.3.4.1 IUID Marking Requirement: The Contractor’s IUID Marking Plan shall fully detail and document the strategy and scope to be used to meet MIL-STD-130N, DoD Standard Practice Identification Marking of US Military Property. The plan must be approved by the Government

PWS REVISION: 0 8

Engineering organization, prior to implementation. (CDRL A007, DI-MGMT-81803 Item Unique Identification (IUID) Marking Plan)

4.3.4.2 Reporting in IUID Registry:

4.3.4.2.1 Transmission of Government property must be recorded in the IUID Registry. The Government is required to record the transfer of GFP to the Contractor. The Contractor is required to record the receipt of GFP from the Government. The Contractor is required to record the return of GFP to the Government.

4.3.4.2.2 The Government or Contractor/subcontractor personnel responsible for causing a “life cycle event” (i.e., abandoned, consumed, destroyed by accident, destroyed by combat, donated, exchanged – repair, exchanged – sold, exchanged – warranty, expended – experimental/target, expended – normal use, leased, loaned, lost, reintroduced, retired, scrapped, sold – foreign government, sold – historic, sold – nongovernment, sold – other federal, sold – state/local, and stolen) will update the item record in the IUID Registry.

4.3.5 Material Quality: Material or parts used for replacement shall be equal to or exceed the quality of the original material or parts. Parts which bare a national stock number designation may be replaced by a similar part, provided the alternate part is designated as an acceptable replacement by a federal catalog and approved by appropriate Government POC.

4.3.6 Production Problems: For the purpose of resolving production problems that would prevent achievement of production targets as they occur, the Contractor shall report them to the ACO/PCO. The PCO will coordinate with the appropriate Government MFT for resolution.

4.3.7 Calibration: Calibration standards for test equipment must be traceable to the National Institute of Standards and Technology in accordance with ANSI/NCSL Z540.3. All test and measurement equipment shall be verified to have a current calibration prior to use, at such intervals and in the manner described under Contractor’s established calibration procedures.

4.3.8 Test and Final Inspections:

4.3.8.1 Post Repair Inspection: Inspect, service, test, and check the completed item in accordance with Contractor procedures to ensure item meets operational standards called out on item drawing, prior to presentation to the Government for acceptance.

4.3.8.2 Acceptance Testing: Acceptance testing shall be performed on 100% of deliverable items in accordance with the Government approved Contractor’s established Acceptance Test Procedure (ATP) or the Government approved test specification. Acceptance Test Data Reports shall be provided if required. (CDRL A004, Test/Inspection Report DI-NDTI-80809B)

4.3.8.3 Test Procedure Qualification: Contractor shall utilize Acceptance Test Procedures (ATPs) already in Contractor’s possession and utilized in the normal course for repair. If ordered, the Contractor shall be required to generate or modify the ATP qualification shall

PWS REVISION: 0 9

consist of specific requirements which will be stipulated in the applicable Delivery Order. The negotiated schedule for the ATP generation or modification shall be included in the Delivery Order. Production delivery of affected items shall not occur prior to the government approval of the ATP qualification activity. (CDRL A004, Test/Inspection Report DI-NDTI-80809B)

4.3.8.4 Test Procedures: When included at time of Delivery Order issuance (and included in Contractor’s price as a separate CLIN), if required by CDRL, the Contractor shall prepare and submit for Government approval, an ATP in accordance with the requirements of this PWS, the Contract Data Requirements List (CDRL), and the specification, drawing and/or Purchase Department Specification (PDS) for each part number listed as an output item in this PWS.

Otherwise, the Contractor shall complete testing of the item using Contractor’s established ATP.

If required by CDRL and if no provisions for acceptance testing are contained in the referenced documents, the Contractor shall propose an ATP based upon his current (reverse) engineering evaluation of the item, including all components, sub-components and assemblies. The ATP shall include procedures that verify the item performance, functionality, quality, and reliability as specified in the item drawing, and include Environmental Stress Screening (ESS) for each part number referenced in this document as requiring ESS.

4.3.9 Delivery Schedule: Turn Around Time (TAT) and delivery schedules shall be negotiated prior to contract award. The Contractor shall deliver the repaired items in accordance with the negotiated delivery schedule; however, should late delivery occur, delivery shall not exceed 5% late delivery rate per delivery order. The Contractor shall negotiate a revised delivery schedule for each late asset that is acceptable to the Government. The contractor will not be held responsible for late deliveries when adequate assets are not provided by the Government during the delivery order period or for assets that meet the BER criteria in Section 4.4.3.1 of this PWS.

Contractor is authorized to exceed the delivery rate, or to complete performance of this contract prior to the time set forth in the Schedule; provided, however, that nothing contained herein shall obligate the Government to perform any of its obligations to the Contractor at an earlier date than set forth in the contract in order to assist the Contractor to make deliveries on an accelerated basis.

4.3.10 SURGE/MICAP: In the event that an item is required by the Government to fill MICAP (Project Code: N, JA, 1A, or 700) or SURGE (Project Code: 9 or GJ) backorders, the OPCO/Government will notify the Contractor in writing via E-mail as soon as the need is identified. In these situations, the Contractor shall employ a best effort to expedite the repair process to meet Government SURGE and MICAP requirements. For MICAP/SURGE requirements, Contractor shall propose a delivery schedule within 72 business hours after notification. The delivery schedule shall include constraints (such as carcass availability or funding), and any negative impact to the delivery schedule. Performance threshold is to meet the delivery schedule established for Surge/MICAP requirements 100% on time.

4.3.11 GFP Tester Maintenance: The Contractor shall provide regular and preventive maintenance on all Government testers, to include regular calibration of GFP test equipment at no additional cost IAW FAR Clause 52.245-1 “Government Property”. In the event a repair action is necessary IAW Clause 52.245-1, the Contractor shall immediately advise Defense

PWS REVISION: 0 10

Contract Management Agency (DCMA), who will validate the need for repair, and submit a proposal to the Administrative Contracting Officer (ACO). The ACO will advise the Contractor on a course of action to remedy the problem and will consider an equitable adjustment to the contract pursuant to the aforementioned clause. All costs incurred in repairing GFP will be made using the Over and Above Contract Line Item Number (CLIN).

4.3.11.1 Test Equipment Spares: The Over and Above CLIN will also be used to fund test equipment spares in advance of anticipated failures in the amount and at such price identified by the Contractor at the time of need.

4.3.12 Program Management Support: The Contractor shall provide internal program management and control on all matters related to this PWS, from conception to completion.

Within five working days after receipt of asset/order, the Contractor shall electronically inform the Government of any issue that will affect delivery, quality, or deviation from stated performance requirements along with the Contractor’s efforts to resolve the delay.

4.3.12.1 Program Manager: The Contractor shall establish a point of contact (POC) for program management, and one POC for contracting, having authority and responsibility for the overall effort for all DOs. The intent of the Program Manager is to give the Government agencies a point of contact for each management area to avoid possible duplication of effort from multiple DOs. The designated Program Manager shall serve as the Contractor’s focal point for the Government and ensure successful fulfillment of all PWS requirements within the agreed upon schedule. The Program Manager shall act as the task integrator, assuring that all technical and program elements of a DO provide a fully integrated approach. When required, the Contractor Program Manager shall report program status quarterly in accordance with Contract requirements. The report shall include milestone/task status, future plans, contract delivery status, and report preparer as define (CDRL A002, Status Reports DI-MGMT-80368A.)

4.3.12.2 Program Management Plan (PMP): When directed, the Contractor shall develop a PMP that describes how the program shall be accomplished to meet the goals of the program.

The plan shall identify as a minimum: all applicable tasks, reviews, status reports, data deliveries and milestones. The purpose of this plan is to provide the management oversight into the program.

4.3.12.3 Schedule: When directed, the Contractor shall develop a detailed integrated master schedule (IMS) that is compliant with the contract line item delivery schedule. This detailed IMS is considered a prime PMP element and shall support all other elements of the PMP to include all milestones and contract deliverables. It requires Government approval for implementation and any proposed changes.

4.3.12.4…