Questions and Responses 3.docx
DOCX document 13 KB Posted
- Attached to
- F16 Tail Paint Stands Federal contract opportunity
- Solicitation number
- FA822421R0007
About this file
This document provides details on a federal solicitation for the fabrication of F-16 tail paint stands. The Air Force Sustainment Center within the Department of the Air Force Materiel Command is seeking bids to fabricate twelve F-16 Tail Paint Stands in accordance with Drawing X202023571. The first prototype stand must be delivered within five months of contract award, with five additional stands due twelve months after prototype acceptance and the remaining six stands due twenty-four months following prototype acceptance. All stands are to be delivered to Hill Air Force Base in Utah on an FOB Destination basis. The document also includes questions and responses relating to fastener specifications for the stands.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| Questions and Responses 4.docx | DOCX document | |
| Questions and Responses 2.docx | DOCX document | |
| Questions and Responses 1.docx | DOCX document | |
| SOW F16 Paint Stand 29 Jan.docx | DOCX document | |
| Solicitation - FA822421R0007.pdf | ||
| Addendums 52.212-1 and 52.212-2.docx | DOCX document |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
F-16 PAINT TAIL STAND
QUESTIONS AND RESPONSES 3
Question:
Fasteners – Many of the Hex head screws are calling for a 3A thread. Can you provide a spec/mil std for each? Any 2B & 2A fastener can be matched up with a McMaster part but not the 3A Hex Heads. One of the key things we are looking for is the finish required on the fasteners.
Response:
2A for external threads is acceptable for the hex head fasteners.
Zinc plated hex bolts are acceptable
File details come from the government source that posted it. Updated .