PWS_A-10_Enviro_27_OCT.pdf

PERFORMANCE-BASED WORK STATEMENT (PWS)

FOR

MAINTENANCE SERVICES

ENVIRONMENTAL TESTING A-10

(309 SMXG)

27 OCTOBER 2014

TABLE OF CONTENTS

1. Description of Services 3

2. Contractor Tasks 3

3. Services Summary 3

4. Government Furnished Property 4

5. General Information 4

6. Appendices 5

1. DESCRIPTION OF SERVICES:

1.1 The contractor shall provide environmental testing and reports for the A-10C Portable

Automatic Test Station (PATS-70A) flight line tester, Windshield Temperature Tester, and Fuel Quantity Tester with the objective to providing Environmental testing and reports on the tests listed in section 2.1

1.2 All required services listed under Basic Services within this PWS will be requested individually by Task Order from this basic PWS.

2. BASIC SERVICES:

2.1 The contractor shall coordinate with the Government Representative (GR) for an on-site visit, within 15 days of contact by the government. A GR will arrive at the contractor’s place of performance with one or more of the items listed in the workload section of this PWS. These items may include: a PATS-70 Core unit, a PATS-70 Auxiliary unit, a Windshield Temperature Tester, and/or a Fuel Quantity Tester. If this is not feasible, the Government will ship the test items to the contractor, at no cost to the contractor.

2.1.1 The contractor shall provide one or more of the following environmental tests, as required by Task Order, and provide a test report for each test detailing the results of the operational test within 14 calendar days (CDRL A001)

2.1.1.1 High Temperature per MIL-PRF-28800F Class II.

2.1.1.2 Low Temperature per MIL-PRF-28800F Class II.

2.1.1.3 High Temp/Solar Operational per MIL-STD-810G Method 501.5

Procedure I.

2.1.1.4 Low Temperature per MIL-STD-810G Method 502.5 Procedure I.

2.1.1.5 Low Humidity per MIL-PRF-28800F Class II.

2.1.1.6 Vibration per MIL-PRF-28800F Class II.

2.1.1.7 Shock per MIL-PRF-28800F Class II.

2.1.1.8 Transit Drop per MIL-PRF-28800F Class II.

2.1.1.9 Rain/Splash per MIL-PRF-28800F Class II.

2.1.1.10 Explosive Atmosphere per MIL-PRF-28800F Class II.

2.1.1.11 Crush 1000 lbs. force applied for 10 minutes in all 3 Axes modified MIL-PRF 28800F Class II from 5000 lbs. to 1000 lbs.

2.1.1.12 Dust per MIL-STD-810G Method 510.5.

2.1.1.13 Low Pressure Altitude Storage per MIL-PRF-28800F Class II.

2.1.1.14 EMI per MIL-STD-461, the following tests CE102, CS101, CS114, CS115, CS116, RE102, and RS103.

2.1.2 The Government Representative (GR) shall inspect the unit(s) under test as each phase of the testing is accomplished, or the GR may increase the number of quality control inspections, if deemed appropriate by the GR, as required.

Government personnel shall be admitted to all facilities where the testing is performed.

2.1.2.1 The attendance, or absence, of the GR for testing will be identified at each

Task Order. If the GR is absent, the task order will explain any needed criteria that shall be performed by the contractor, in-lieu of the GR being present.

2.2 The contractor shall return each test article upon completion to the GR who will transport it back to Hill AFB.

2.2.1 If special transport of test articles is needed, it will be detailed on the individual Task Order.

3. SERVICE SUMMARY (SS)

Performance Objective PWS

Para Performance Threshold

The contractor shall provide the GR with a report detailing the results of the operational test within 14 calendar days.

2.1.1 (Satisfactory) Delivery of CDRL (A001)

4. GOVERNMENT FURNISHED PROPERTY AND SERVICES

4.1 The test articles with all associated cable shall be furnished to the contractor for the environmental tests under this contract. The contractor shall be responsible for safeguarding all Government property provided for contractor use.

4.1.1 All items to be submitted for testing will be described in the Task Order, from those items listed as possible subjects from Appendix B.

4.2 The Government shall have unlimited rights to all intellectual property developed by the contractor under this contract. The Government may use such items for any other purpose as defined in the Defense Federal Acquisition Regulation Supplement (DFARS) definition of “unlimited rights”.

5. GENERAL INFORMATION:

5.1 SPECIAL QUALIFICATIONS:

5.1.1 Contractor must be able to perform all tests in accordance with the specifications listed above.

5.2 SAFETY REQUIREMENTS:

In performing work under this contract, the contractor shall:

5.2.1 Conform to the safety requirements contained in this contract for all activities related to the accomplishment of the work.

5.2.2 Comply with additional, immediate precautions that the Contract Officer (CO) may require for safety and mishap prevention purposes.

5.2.3 Provide protection to government property to prevent damage during the period of time the property is under the control, or in possession of, the contractor.

5.2.4 Include a clause in all subcontracts to require subcontractors to comply with the safety provisions of this contract as applicable.

5.2.5 In the event of an accident or mishap, the contractor shall take reasonable and prudent action to establish control of the accident/mishap scene, prevent further damage to persons or property, and preserve evidence until released by the accident/mishap investigative authority through the CO.

5.2.6 Record and report promptly (within one hour) to the CO and/or authorized GR, all available facts relating to each instance of damage to government property or injury to either contractor or government personnel.

5.2.7 If the government elects to conduct an investigation of the accident/mishap, the contractor shall cooperate fully and assist government personnel in the conduct of investigation until the investigation is completed.

5.3 HOURS OF OPERATION:

N/A

5.4 GOVERNMENT OBSERVATIONS:

5.4.1 Government personnel may not interfere with contractor performance, and only the CO may make changes to the contract.

5.5 CONTRACTOR REPORTING:

N/A

6. APPENDICES

A. Acronyms & Abbreviations list B. Workload Data

APPENDIX A

ACRONYMS AND ABBREVIATIONS

Acronym/Abbreviations Definition AFED Air Force Engineering Data AFTD Air Force Technical Data ANSI American National Standards Institute ASO American Standards Organization ATE Automated Test Equipment ATP Automated Test Procedures AFB Air Force Base AFMC Air Force Material Command AMSO Acquisition Management Support Office AMSS Acquisition Management Support Specialist CAR Corrective Action Report CDRL Contract Data Requirements List CFR Code of Federal Regulation CO Contract Officer COR Contracting Officer Representative DoD Department of Defense DFARS Defense Federal Acquisition Regulation Supplement ECM Engineering Change Memorandum FAR Federal Acquisition Regulation FY Fiscal Year GR Government Representative HAFB Hill Air Force Base IAW In Accordance With ISO International Standard Organization MIL-PRF Military Performance Specification MIL-STD Military Standard OEM Original Equipment Manufacturer OSHA Occupational Safety and Health Act PARA Paragraph PATS Portable Automatic Test Station PPE Personal Protective Equipment PWS Performance-Based Work Statement OEM Original Equipment Manufacture SMXG Software Maintenance Group SS Service Summary TO Technical Order TP Test Plan UIC Unit Identification Code

APPENDIX B

Workload Data

PATS-70A

PATS-70A Core Unit Dimensions

26” x 19” x 21”

Weight 100 lbs.

PATS-70A Auxiliary Unit

Dimensions 34” x 19” x 21”

Weight 150 lbs.

Cables Core Cables and Aux Cables

Windshield Temperature Tester Windshield Temperature Test Set

ITA

Dimensions 6” x 6” x 10”

Weight 10 lbs.

Cables Cables

Fuel Quantity Tester Fuel Quantity

ITA

Dimensions 18” x 18” x 18”

Weight 40 lbs

Cables Cables