FORM158.pdf

PACKAGING REQUIREMENTS

AFMC FORM 158, 20150424

PR, MIPR, OR DOCUMENT 3. INSTRUCTIONS TO CONTRACTING OFFICER: Insert appropriate vendor packaging instructions in Section D for applicable item(s) as indicated below:

SEE REVERSE FOR SPECIFIC INSTRUCTIONS:

1. PACKING REQUIREMENTS: Block 1 shall always be completed and may be further defined in Blocks 2, 3, or 4. The term "Item ID" refers to line item number, item name, NSN/MMAC, or any other way of identifying a particular item. MIL-STD- 2073-1 represents Military Preservation (PRES) and Packing (PACK). Military packing consists of levels A and B. ASTM D3951 may be substituted by another document if specified in Block 2. Quantity Per Unit (QUP) is abbreviated.

ITEM ID

QUP

MIL-STD-2073-1

PRES PACK

(X) (A/B)

COMMERCIAL

ASTM D3951

PACKPRES

(X) (X)

MIL-STD-129

MARKING

(X)

SPECIAL

PACKAGING

INSTRUCTION

NUMBER

2. ADDITIONAL PACKAGING AND CONTAINER MARKING REQUIREMENTS (Specify all revisions and dates or required specifications)

A. ENGINEERED OR SPECIALIZED CONTAINERS (CDRS)

B. PACKAGING OF HAZARDOUS MATERIALS

C. PACKAGING DATA (Coded and/or Special Packaging Instructions)

D. MARKING OF WARRANTED ITEMS, ITEM NAME(S)

E. WOOD PACKAGING MATERIAL ISPM 15

4. CODED DATA: Coded requirements shall be interpreted in accordance with MIL-STD-2073-1

ORGANIZATION PACKAGING SPECIALIST (Typed Name)

QUANTITY

QUP ICQ

PRES

METH

C D

PRES

MTL

WRAP

MTL

CUSH

DUNN

C T

UNIT

CONT

INT

CONT

U C L

SPEC

MKG

O P I

UNIT PACK WEIGHT UNIT PACK SIZE UNIT PACK CUBE

10 LENGTH 1000THWHOLE CUBE10 WIDTH 10 DEPTH 10

PACKAGING SPECIALIST SIGNATURE DATE

PREVIOUS EDITIONS ARE OBSOLETE Page 1 of 2 Pages

AFMC FORM 158, 20150424 Page 2 of 2 Pages

ADDITIONAL INFORMATION

PACKAGING REQUIREMENTS

AFMC FORM 158, 20150424

3. INSTRUCTIONS TO CONTRACTING OFFICER: Insert appropriate vendor packaging instructions in Section D for applicable item(s) as indicated below:

SEE REVERSE FOR SPECIFIC INSTRUCTIONS:

1. PACKING REQUIREMENTS: Block 1 shall always be completed and may be further defined in Blocks 2, 3, or 4. The term "Item ID" refers to line item number, item name, NSN/MMAC, or any other way of identifying a particular item. MIL-STD- 2073-1 represents Military Preservation (PRES) and Packing (PACK). Military packing consists of levels A and B. ASTM D3951 may be substituted by another document if specified in Block 2. Quantity Per Unit (QUP) is abbreviated.

ITEM ID

QUP

MIL-STD-2073-1

PRES

PACK

(X) (A/B)

COMMERCIAL ASTM D3951

PACK

PRES

(X) (X)

MIL-STD-129

MARKING

(X)

SPECIAL PACKAGING INSTRUCTION NUMBER

4. CODED DATA: Coded requirements shall be interpreted in accordance with MIL-STD-2073-1

QUANTITY

QUP

ICQ

PRES METH

C D

PRES MTL

WRAP MTL

CUSH DUNN

C T

UNIT CONT

INT CONT

U C L

SPEC MKG

O P I

UNIT PACK WEIGHT

UNIT PACK SIZE

UNIT PACK CUBE

LENGTH

1000TH

WHOLE CUBE

WIDTH

DEPTH

PREVIOUS EDITIONS ARE OBSOLETE

Page 1 of 2 Pages

AFMC FORM 158, 20150424

Page 2 of 2 Pages 11.0.1.20130826.2.901444.899636

REQUIREMENTS: USE THE LATEST REVISION OF (ISPM No. 15) THE FOLLOWING STATEMENT IS IN COMPLIANCE WITH THE UNITED NATIONS-IMPLEMENTED RESTRICTIONS ON WOOD PACKING MATERIAL (WPM). THIS REQUIREMENT IS SPECIFICALLY CONCERNED WITH INVASIVE SPECIES SUCH AS THE PINEWOOD NEMATODE. WPM IS DEFINED AS WOOD PALLETS, SKIDS, LOAD BOARDS, PALLET COLLARS, WOODEN BOXES, REELS, DUNNAGE, CRATES, FRAMES, AND CLEATS. THE STATEMENT BELOW CITES THE REQUIREMENTS IN DETAIL AND COVERS LUMBER FOR BUILDING CONTAINERS AND PALLETS USED FOR DELIVERIES RESULTING IN SHIPMENTS WORLDWIDE (DIRECT, OR THROUGH AIR LOGISTICS CENTERS (ALC), CONTAINER CONSOLIDATION POINTS (CCP), OR OTHER BASES).

WOODEN LUMBER, WOODEN PALLET AND PACKAGING/CONTAINER STATEMENT:

ALL WOODEN LUMBER, WOODEN PALLET’S, AND WOODEN CONTAINERS PRODUCED ENTIRELY OR IN PART OF WOOD PACKING MATERIAL (WPM) SHALL BE CONSTRUCTED FROM DEBARKED WOOD IN ADDITION TO HEAT-TREATED (HT) MATERIAL (HT TO 56 DEGREES CENTIGRADE OR 133 DEGREES FAHRENHEIT FOR 30 MINUTES). CERTIFICATION/MARKING IS REQUIRED BY AN ACCREDITED AGENCY RECOGNIZED BY THE AMERICAN LUMBER STANDARDS COMMITTEE (ALSC). FOR REFERENCE DOCUMENTATION, SEE “INTERNATIONAL STANDARDS FOR PHYTOSANITARY MEASURES, LATEST REVISION OF ISPM) NO. 15, "REGULATION OF WOOD PACKAGING MATERIAL IN INTERNATIONAL TRADE."

VENDOR PACKAGING INSTRUCTIONS:

Military Packaging and Marking Items shall be packaged in accordance with MIL-STD-2073-1E, Standard Practice for Military Packaging. Shipping and storage markings shall be in accordance with MIL-STD-129R, Standard Practice for Military Marking.

Engineered or Specialized Containers (CDRS).

a) Existing containers or designs already in the DoD inventory shall be evaluated for use or adaptation prior to the development of new containers (MIL-STD-2073-1E, Standard Practice for Military Packaging). Modifications of existing containers or designs are an acceptable alternative to new containers when approved by the Government. The Contractor’s recommendation shall be based on information received from queries using DI-PACK-80683B, Container Design and Retrieval System (CDRS) Search Request (b) Air Force acceptance of proposed new engineered or specialized containers shall be by written notice from the Contracting Officer and identify each container accepted. Considerations for acceptance include life-cycle cost, capability to interface with DoD distribution systems (storage and transportation), ability to meet operational requirements, and qualification testing requirements. (c) When accepted, the Contractor shall comply with DI-PACK-80684 B, Container Design and Retrieval System (CDRS) Data Input.

Packaging and Marking of Hazardous Material Hazardous materials shall be prepared for shipment in accordance with the following applicable regulations for the individual shipment hazard, ultimate destination, and mode of transportation: (a) Code of Federal Regulations (CFR) Title 29, Part 1910.1200; (b) Code of Federal Regulations (CFR) Title 49; (c) Air Force Manual (AFMAN) 24-204_IP, Preparing Hazardous Materials for Military Air Shipment; (d) International Civil Aviation Organization (ICAO) Technical Instructions for the Safe Transport of Dangerous Goods by Air; and (e) International Maritime Dangerous Goods (IMDG) Code.

Packaging Data (Coded and/or Special Packaging Instructions).

The Contractor shall provide packaging data in accordance with DD Form 2326, Preservation and Packing Data, and/or DD Form 2169, Special Packaging Instructions. MIL-STD-2073-1E, Standard Practice for Military Packaging, identifies the applicable data elements. DI-PACK-80120 B, Preservation and Packing Data, and DI-PACK-80121 B, Special Packaging Instructions, apply.

Marking of Warranted Items.

The contractor shall mark the items or otherwise furnish notice with the items to show the existence of the warranty; its substance and duration; and the name, address, and telephone number of the person to notify if the items are defective in accordance with Warranty Terms and Conditions.