2508225_ATTACH.pdf

17 LBS

DESCRIPTION

SPECIFICATION

MATERIAL

REVISIONS

SPEC STYLE TYPE CL VRTY GR TR

AS SPECIFIED BELOW AND BILL OF MATERIALS

LENGTH WIDTH DEPTH

LEVEL A LEVEL B

K. KNIGHTON

K.W. OLSON

D. STEPHENS

T. LOOCK

SIZE:

(INCHES UNLESS SPECIFIED)

TOLERANCES ON FRAC. ± 1

8, DECIMAL ± .01, ANGLES ± 1°

P/N DESCRIPTION

MARCH 87

REQD

DD 2169 MOD

FORM

NOMENCLATURE

A/R

STEEL CLIPS

STEEL BANDS

WRAP

VOID FILLER

CUSHION (TOP & BOTTOM)

CUSHION (ENDS)

CUSHION (SIDES)

SKIDS

-8

-7

-6

-5

-4

-3

-2

-1

QTY

CLOSURE:

LEVEL B: IAW ASTM-D6251

LEVEL A: IAW ASTM-D6251

1 1/2 X 3/4 X .015

3/4 X A/R

105 X 58

AS REQUIRED

81 X 24 X 2

24 X 9 3/4 X 2

85 X 9 3/4 X 2

4 X 4 (NOM) X 30

ASTM-D3953 TYPE 1, REG DUTY, FINISH A

ASTM-D3953 TYPE 1, REG DUTY, FINISH A

PPP-C-1797 TYPE 1

PPP-C-1797 TYPE 1

MIL-PRF-26514 TYPE 1, CLASS 2, GRADE B

MIL-PRF-26514 TYPE 1, CLASS 2, GRADE B

MIL-PRF-26514 TYPE 1, CLASS 2, GRADE B

ASTM-D6199 CLASS 2

LTR

ILL. CURRENTNATIONAL STOCK NO.PART OR DRAWING NO.

ITEM NOMENCLATURE

SPECIAL MARKINGS:

SERVICEABLE METHOD: 10

PRESERVATIVE: N/A

UNSERVICEABLE METHOD: 10

CLEANING & DRYING: IAW MIL-STD-2073

MILITARY PRESERVATION IAW MIL-STD-2073

B) REUSEABLE CONTAINER DO NOT DESTROY.

MARK THE SPI NUMBER ON ONE SIDE OF THE CONTAINER.

MARKING IAW MIL-STD-129

TRAILING EDGE, AIRCRAFT

A) SPI NO. F01-126-3144

QUP

ICQ 000

160D612512-2

LEVEL B:

LEVEL A:

ITEM WT.

ITEM DIM

CNTR O.D.

DESIGN FRAGILITY G

LEVEL B:

LEVEL A:

CNTR I.D.

1560-01-126-3144 FJ

GROSS WT LBS

GROSS CU FT

LEVEL

B

A

DATE

PACKING

REV

ORIGINAL

AUTH.

ENGR.

CHK.

SPECIAL PACKAGING INSTRUCTION

98747

CODE ID

COMPUTER GENERATED

SPI NO. F01-126-3144

DATE

4 3/4

15 1/4

15 1/4

28 9 3/4

9 3/4

SPI NO. (TPO)

SHEET 1 OF 3

OPENING INSTRUCTIONS:

AFTER OPENING, SAVE ALL CUSHIONING/DUNNAGE

FOR RE-USE.

DO NOT OPEN UNTIL READY FOR USE/INSPECTION.

SEE CAUTION NOTICES PAGE 2.CAUTION

F01-126-3144

C

83125

ASTM-D6251 (MOD)

ASTM-D6251 (MOD)

A

A III

III

A

B

23.034

147.48 147.48

23.034

B

UPDATE SPECS/STANDARDS AND ADDED

WOOD STATEMENT AN DRAWING

04246

C ADDED NEW WOOD STATEMENT 10013

DD 2169C MODMARCH 87

FORM

COMPUTER GENERATED

NOTICE 1: MATERIAL PACKAGED IN PREVIOUS EDITIONS OF THE SPI DO NOT REQUIRE REPACKAGING IF

THE INTEGRITY OF THE SPI IS MAINTAINED.

NOTICE 2: OTHER NSNs MAY BE ASSIGNED TO THIS SPI BUT MAY NOT BE SHOWN ON THE SPI.

NOTICE 3: PACKAGING MATERIAL MAY BE SUBSTITUTED IF IT MEETS THE REQUIREMENTS OF

MIL-STD-2073, PROVIDES EQUAL OR BETTER PROTECTION AND THERE IS NO INCREASED COST TO THE

GOVERNMENT.

NOTICE 4: OVERSEAS AND FMS PACKAGING MUST MEET THE REQUIREMENTS OF LEVEL A PACKAGING.

SPECIAL PACKAGING INSTRUCTION

CAUTION NOTICES

SPI NO. (TPO)

SHEET 2 OF 3

ITEM NOMENCLATURE

98747

CODE ID

F01-126-3144

TRAILING EDGE, AIRCRAFT

CAUTION NOTICES

INTERNATIONAL STANDARDS FOR PHYTOSANITARY MEASURES

REVISION OF ISPM NO. 15

REVISION OF WOOD PACKAGING MATERIAL FOR INTERNATIONAL TRADE

THE FOLLOWING STATEMENT IS IN COMPLIANCE WITH THE UNITED NATIONS-IMPLEMENTED RESTRICTIONS ON WOOD PACKAGING MATERIAL (WPM). THIS REQUIREMENT IS SPECIFICALLY CONCERNED WITH INVASIVE SPECIES SUCH AS THE PINEWOOD NEMATODE. WPM IS DEFINED AS WOOD PALLETS, SKIDS, LOAD BOARDS, PALLET COLLARS, WOODEN BOXES, REELS, DUNNAGE, CRATES, FRAMES, AND CLEATS. THE STATEMENT BELOW CITES THE REQUIREMENTS IN DETAIL AND COVERS LUMBER FOR BUILDING CONTAINERS AND PALLETS USED FOR DELIVERIES, RESULTING IN SHIPMENTS WORLDWIDE (DIRECT, OR THROUGH AIR LOGISTICS CENTERS (ALC), CONTAINER CONSOLIDATION POINTS (CCP), OR OTHER BASES).

WOODEN LUMBER, WOODEN PALLET AND PACKAGING/CONTAINER STATEMENT:

ALL WOODEN LUMBER, WOODEN PALLETS, AND WOODEN CONTAINERS PRODUCED ENTIRELY OR IN PART OF WOOD PACKAGING MATERIAL (WPM) SHALL BE CONSTRUCTED FROM DEBARKED WOOD IN ADDITION TO THE APPLICATION OF HEAT-TREATED (HT) MATERIAL (HT TO 56 DEGREES CENTIGRADE OR 133 DEGREES FAHRENHEIT FOR 30 MINUTES). CERTIFICATION/MARKING IS REQUIRED BY AN ACCREDITED AGENCY RECOGNIZED BY THE AMERICAN LUMBER STANDARDS COMMITTEE (ALSC). FOR REFERENCE DOCUMENTATION, SEE LATEST REVISION OF "INTERNATIONAL STANDARDS FOR PHYTOSANITARY MEASURES (ISPM

NO. 15), "REGULATION OF WOOD PACKAGING MATERIAL IN INTERNATIONAL TRADE."

-4

DD

FORM

MARCH 87 2169C MOD COMPUTER GENERATED

SPECIAL PACKAGING INSTRUCTION

TRAILING EDGE, AIRCRAFT

ITEM NOMENCLATURE

F01-126-3144

SPI NO. (TPO)

SHEET 3 OF 3

98747

CODE ID

ITEM REFERENCE

-6

-3

-8

-4

-2

-1

-7

-5