FA821113R3004_______0002.pdf

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT 1. CONTRACT ID CODE

JSU

2. AMENDMENT/MODIFICATION NO.

FA8211-13-R-3004-0002

3. EFFECTIVE DATE

4. REQUISITION/PURCHASE REQ. NO.

F2DCCP2297B001

5. PROJECT NO (If applicable)

T-38 Engineering Services

6. ISSUED BY CODE

DEPARTMENT OF THE AIR FORCE, DIRECTORATE OF CONTRACTING

AFLCMC WLDKAA

6072 FIR AVENUE BLDG 1233

HILL AIR FORCE BASE UT 84056-5820

BUYER: Casey Hodson/AFLCMC casey.hodson@hill.af.mil Phone: (801) 777- 8416 Fax: (801) 777-5777 No Collect Calls

7. ADMINISTERED BY (If other than item 6) CODEFA8220

8. NAME AND ADDRESS OF CONTRACTOR (No., street, county, State and ZIP Code)

CODE

X

9A. AMENDMENT OF SOLICITATION NO.

FA821113R3004

9B. DATED (SEE ITEM 11)

6-JUN-2013

10A. MODIFICATION OF CONTRACT/ORDER NO.

10B. DATED (SEE ITEM 13)

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

The above numbered solicitation is amended as set forth in item 14. The hour and date specified for receipt of Offers is extended, is not extended. Offers must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended, by one of the following methods. ( a ) By completing Items 8 and 15, and returning copies of the amendment; ( b ) By acknowledging receipt of this amendment on each copy of the offer submitted; or ( c ) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. ACCOUNTING AND APPROPRIATION DATA (If required)

13. THIS APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS

IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE CONTRACT ORDER NO. IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation date, etc.) SET FORTH IN ITEM 14, PURSUANT TO AUTHORITY OF FAR 43.103(b).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

E. IMPORTANT: Contractor is not, is required to sign this document and return 1 copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

ROUTINE FAST PAY PROCEDURES APPLY

This is an Engineering Services IDIQ Contract for a 5-year basic.

15A. NAME AND TITLE OF SIGNER (Type or print)

15B. CONTRACTOR/OFFEROR

BY ________________________________________________________

(Signature of person authorized to sign)

15C. DATE SIGNED

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

16B. UNITED STATES OF AMERICA

BY ____________________________________________________

(Signature of Contracting Officer)

16C. DATE SIGNED

FACILITY CODE

NSN 7540-01-152-8070

PREVIOUS EDITION UNUSABLE

30-105 STANDARD FORM 30 (REV. 10-83)

PRESCRIBED BY GSA

FAR (48 CFR) 53.243

X

X X

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

Amendment/Modification FA8211-13-R-3004-0002

Continuation of block 14. DESCRIPTION OF AMENDMENT/MODIFICATION

The purpose of this amendment is to:

1. In the Ordering Procedures change Part (C) to read "14 to 30" days to submit a simple proposal and "14 to 45" days for a complex proposal.

Request for Proposal FA8211-13-R-3004-0002

PART I - THE SCHEDULE

SECTION B

SUPPLIES OR SERVICES AND PRICES/COSTS

The ordering Period for this contract will be five years from Time of Award estimted as 30 September 2013 to 30 September 2018 (with a possible six month option to extend services (if exercised would extend ordering period to 30 March 2019)) plus a Period of Performance that shall not exceed 24 months from the Last day of the ordering period.

Engineering Services - FFP Labor

Item No.

Firm Fixed Price Quantity U/I Unit Price Amount

1 LO

Engineering Services Labor - FFP Contractor shall provide qualified personnel to perform engineering services in accordance with the Statements of Work (SOW), Contractual Engineering Tasks (CET), and/or Contract Data Requirements Lists (CDRLs) contained in each individual task order associated with this IDIQ contract. The hours required to perform the services will be negotiated in each task order.

IAW PWS 4.0

F-5/T-38 Engineering Services Rates CY 2013/2014/2015/2016/2017/2018/2019/2020 FFP Rates

FFP Rates

RATES

CY2013 through CY2020

TECHNICAL 1

TECHNICAL 2

TECHNICAL 3

TECHNICAL 4

TECHNICAL 5

PROJECTMANAGEMENT

PROGRAMMANAGER

PRODUCTSUPPORT

CONTRACTS/SUBCONTRACTS1

CONTRACTS/SUBCONTRACTS2

FINANCE

MISSIONASSURANCE/QA

ADMINISTRATIVE

ENGINEERINGDESIGN(IWO)

ENGINEERINGTEST

TOOLING

MANUFACTURINGENGINEERING

BUSINESS MANAGEMENT

MAJORSUBBUYERS

ADMINISTRATIVESERVICES

ILS

MANUFACTURINGSUPPORT

FABRICATION

ASSEMBLY

PRODUCTQUALITY

MATERIAL DISTRIBUTION

RELEASEAND CONTROL

****** The lists above is not completethis is just a suggestion. Please provide any additional labor categories you deem necessary to support this contract and future potential delivery order requirements.

Priority: R ROUTINE

Limitations of Liability: Other Than High Value Item

Inspection: Origin Acceptance: Origin Inspection/Acceptance Report: To be completed at the Task Order Level.

Quality Assurance: IAW PWS Paragraph 4.10.1

The CLIN pricing TBD at the Task Order Level.

Engineering Services - CPFF Labor

Item No.

Cost Plus Fixed Fee Quantity U/I Estimated Cost Fixed Fee Est Total Cost

LO

Engineering Services - CPFF Contractor shall provide qualified personnel to perform engineering services in accordance with the Statements of Work (SOW), Contractual Engineering Tasks (CET), and/or Contract Data Requirements Lists (CDRLs) contained in each individual task order associated with this IDIQ contract. The hours required to perform the services will be negotiated in each task order.

IAW PWS 4.0

F-5/T-38 Engineering Services Rates

CY 2013/2014/2015/2016/2017/2018/2019/2020 CPFF Rates

CPFF Rates

RATES CY2013 through CY2020

TECHNICAL1

TECHNICAL2

TECHNICAL3

TECHNICAL4

TECHNICAL5

PROJECTMANAGEMENT

PROGRAMMANAGER

PRODUCTSUPPORT

CONTRACTS/SUBCONTRACTS1

CONTRACTS/SUBCONTRACTS2

FINANCE

MISSIONASSURANCE/QA

ADMINISTRATIVE

ENGINEERINGDESIGN(IWO)

ENGINEERINGTEST

TOOLING

MANUFACTURINGENGINEERING

BUSINESS MANAGEMENT

MAJOR SUBBUYERS

ADMINISTRATIVESERVICES

ILS

MANUFACTURINGSUPPORT

FABRICATION

ASSEMBLY

PRODUCTQUALITY

MATERIAL DISTRIBUTION

RELEASEANDCONTROL

****** The list above is not completethis is just a suggestion. Please provide any additional labor categories you deem necessary to support this contract and future potential delivery order requirements.

Priority: R ROUTINE

Limitations of Liability: Other Than High Value Item

Inspection: Origin Acceptance: Origin Inspection/Acceptance Report: To be completed at the Task Order Level.

Engineering Services - CRNF TRAVEL

Cost Reimbursement - No Fee

Engineering Services - CRNF TRAVEL

Quantity U/I Est Unit Cost Total Estimated Cost 1 LO To be Negotiated To be Negotiated

Engineering Services - Travel Will provide IAW PWS4.6 and FAR 31.205-46 Priority: R ROUTINE

Limitations of Liability: Other Than High Value Item

Inspection: Origin Acceptance: Origin Inspection/Acceptance Report: To be completed at the Task Order Level.

Data - Engineering Services

Firm Fixed Price Quantity U/I Unit Price Amount 1 LO Not Separately Priced Not Separately Priced

Data FFP - NSP Contractor shall provide data in accordance with the Statements of Work (SOW), Contractual Engineering Tasks (CET), and/or Contract Data Requirements Lists (CDRLs) contained in each individual task order associated with this IDIQ contract. This FFP CLIN shall be used when the scope of the effort is well-defined.

IAW PWS 3.1 and 5.2

CDRL: A001, A002, A003, A004, A005, A006, A007, A008, A009, A010, A011, A012, A013, A014, A015, A016, A017, A018, A019, A020, A021, A022, A023, A024, A025.

Priority: R ROUTINE

Limitations of Liability: Other Than High Value Item

Inspection: Origin Acceptance: Origin Inspection/Acceptance Report: To be completed at the Task Order Level.

Engineering Services - CRNF MATERIAL ONLY

Cost Reimbursement - No Fee Quantity U/I Est Unit Cost Total Estimated Cost 1 LO To be Negotiated To be Negotiated

Engineering Services - CRNF MATERIAL ONLY

Engineering Services - Material Only Will provide IAW PWS4.6 and FAR 31.205-46 Priority: R ROUTINE

Limitations of Liability: Other Than High Value Item

Inspection: Origin Acceptance: Origin Inspection/Acceptance Report: To be completed at the Task Order Level.

Engineering Services - FFP Labor - SUBCONTRACTING ONLY

Firm Fixed Price Quantity U/I Unit Price Amount

1 LO

Engineering Services - SUBCONTRACTING ONLY Contractor shall provide qualified personnel to perform engineering services in accordance with the Statements of Work (SOW), Contractual Engineering Tasks (CET), and/or Contract Data Requirements Lists (CDRLs) contained in each individual task order associated with this IDIQ contract. The hours required to perform the services will be negotiated in each task order.

IAW PWS 4.0

Priority: R ROUTINE

Limitations of Liability: Other Than High Value Item

Inspection: Origin Acceptance: Origin Inspection/Acceptance Report: To be completed at the Task Order Level.

PART I - THE SCHEDULE

SECTION E

INSPECTION AND ACCEPTANCE

52.246-4 INSPECTION OF SERVICES--FIXED-PRICE (AUG 1996)

(IAW FAR 46.304)

52.246-5 INSPECTION OF SERVICES--COST-REIMBURSEMENT (APR 1984)

(IAW FAR 46.305)

INSPECTION AND ACCEPTANCE (SEP 1999)

(IAW FAR 46.401(b), FAR 46.503) Government Contract Quality Assurance Inspection and Acceptance will be at (Final):

[CONTRACTOR FILL-IN]

Item No(s): See schedule for items with the following code(s) listed below :

Inspection Code and Address:

PART I - THE SCHEDULE

SECTION F

DELIVERIES OR PERFORMANCE

52.242-15 STOP-WORK ORDER (AUG 1989)

(IAW FAR 42.1305(b)(1))

52.242-15 STOP-WORK ORDER -- ALTERNATE I (APR 1984)

(IAW FAR 42.1305(b)(2))

52.247-55 F.O.B. POINT FOR DELIVERY OF GOVERNMENT-FURNISHED PROPERTY

(JUN 2003)

(IAW FAR 47.305-12(a)(2))

PART I - THE SCHEDULE

SECTION G

CONTRACT ADMINISTRATION DATA

252.232-7006 WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (JUN 2012)

(IAW DFARS 232.7004(b), PGI 232.7004(b)(1))

(a) Definitions. As used in this clause— “Department of Defense Activity Address Code (DoDAAC)” is a six position code that uniquely identifies a unit, activity, or organization.

“Document type” means the type of payment request or receiving report available for creation in Wide Area WorkFlow

(WAWF).

“Local processing office (LPO)” is the office responsible for payment certification when payment certification is done external to the entitlement system.

(b) Electronic invoicing. The WAWF system is the method to electronically process vendor payment requests and receiving reports, as authorized by DFARS 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.

(c) WAWF access. To access WAWF, the Contractor shall—

(1) Have a designated electronic business point of contact in the Central Contractor Registration at https://www.acquisition.gov ; and

(2) Be registered to use WAWF at https://wawf.eb.mil/ following the step-by-step procedures for self-registration available at this web site.

(d) WAWF training. The Contractor should follow the training instructions of the WAWF Web-Based Training Course and use the Practice Training Site before submitting payment requests through WAWF. Both can be accessed by selecting the “Web Based Training” link on the WAWF home page at https://wawf.eb.mil/ .

(e) WAWF methods of document submission. Document submissions may be via web entry, Electronic Data Interchange, or File Transfer Protocol.

(f) WAWF payment instructions. The Contractor must use the following information when submitting payment requests and receiving reports in WAWF for this contract/order:

(1) Document type. The Contractor shall use the following document type(s).

(Contracting Officer: Insert applicable document type(s).

Note: If a “Combo” document type is identified but not supportable by the Contractor’s business systems, an “Invoice” (stand-alone) and “Receiving Report” (stand-alone) document type may be used instead.)

(2) Inspection/acceptance location. The Contractor shall select the following inspection/acceptance location(s) in WAWF, as specified by the contracting officer.

(Contracting Officer: Insert inspection and acceptance locations or “Not applicable.”)

(3) Document routing. The Contractor shall use the information in the Routing Data Table below only to fill in applicable fields in WAWF when creating payment requests and receiving reports in the system.

Routing Data Table* Field Name in WAWF Data to be entered in WAWF Pay Official DoDAAC F2DCCP Issue By DoDAAC FA8211 Admin DoDAAC S2404A Inspect By DoDAAC FA8211 Ship To Code N/A Ship From Code N/A Mark For Code N/A Service Approver (DoDAAC) FA8211 Service Acceptor (DoDAAC) FA8211 Accept at Other DoDAAC N/A LPO DoDAAC N/A DCAA Auditor DoDAAC N/A Other DoDAAC(s) N/A (*Contracting Officer: Insert applicable DoDAAC information or “See schedule” if multiple ship to/acceptance locations apply, or “Not applicable.”)

(4) Payment request and supporting documentation. The Contractor shall ensure a payment request includes appropriate contract line item and subline item descriptions of the work performed or supplies delivered, unit price/cost per unit, fee (if applicable), and all relevant back-up documentation, as defined in DFARS Appendix F, (e.g. timesheets) in support of each payment request.

(5) WAWF email notifications. The Contractor shall enter the e-mail address identified below in the “Send Additional Email Notifications” field of WAWF once a document is submitted in the system.

___________vivian.hughes@hill.af.mil________________________________________ ___________casey.hodson@hill.af.mil____________________________________ (Contracting Officer: Insert applicable email addresses or “Not applicable.”)

(g) WAWF point of contact.

(1) The Contractor may obtain clarification regarding invoicing in WAWF from the following contracting activity’s WAWF point of contact.

_______N/A________________________________________________________ (Contracting Officer: Insert applicable information or “Not applicable.”)

(2) For technical WAWF help, contact the WAWF helpdesk at 866-618-5988.

(The above Clause/Provision has been modified.)

PAYMENT INSTRUCTIONS:

Payment Instructions will be cited on each individual Task Order

ACCOUNTING AND APPROPRIATION DATA (AUG 1998)

Accounting and Appropriation Chargeable ACRN Funds Citation Amount Chargeable

Accounting and Appropriation Chargeable ACRN Funds Citation Amount Chargeable

AA 57 3400 . 30 3 000000 000000 00000 000000 $0.00

REFERENCE:

Funding will be called out on individual orders.

ACRN TOTAL $ 0.00

PART I - THE SCHEDULE

SECTION H

SPECIAL CONTRACT REQUIREMENTS

PREPAID TRANSPORTATION/POSTAGE (OCT 1997)

(IAW FAR 13.403(a))

CONSIGNEE'S NOTIFICATION TO PURCHASING ACTIVITY OF NON-RECEIPT, DAMAGE, OR

NONCONFORMANCE (OCT 1997)

(IAW FAR 13.403(c))

H901– ORDERING PROCEDURES (February 2013)

(a) The purpose of this clause is to define the process the Air Force will utilize for subsequent individual Order(s) performed on this contract. The contractor may accept orders and modifications of orders only from the Procuring Contracting Officer (PCO).

(b) The Air Force may prepare a: (1) Statement of Objectives (SOO); or (2) Performance Work Statement (PWS);

utilizing the procedures below identified.

(1) SOO

(i) The objective of the SOO is for the Air Force to receive an offer for consideration so that it can issue an order describing work to be performed. To achieve this objective the Air Force will forward to the contractor a Request for Proposal (RFP), and Statement of Objectives (SOO) that the Contractor will respond to by transmitting a SOW proposing their solution and its labor allocation for the project.

An RFP/SOO should identify:

(A) problem statement;

(B) order objectives;

(C) quality criteria;

(D) deliverables (end-state) required; and,

(E) magnitude of the project

Contractor shall respond to Air Force’s RFP with a SOW, labor allocation schedule, and any other information that may be identified on the RFP.

(2) PWS

(i) The objective of the PWS is for the Air Force to receive an offer for consideration so that it can issue an order describing work to be performed. To achieve this objective the Air Force will forward to the contractor.

(A) a PWS identifying the work to be performed. Contractor shall respond to the Air Force’s RFP with a labor allocation schedule, and any other information that may be identified on the

RFP.

(c) Upon RFP issuance the time frames for receipt of proposals will typically be between 14 to 30 days for a simple proposal, and 14 to 45 days for a complex proposal, depending on the complexity of the contemplated order. Specific time frames will be noted in the letter RFP transmitted by the PCO.

(d) The Contractor shall submit a Proposal based on the Air Force Proposal Adequacy Checklist (AFPAC) Preparation Guidelines IAW attachment in Section J.

(i)Contractor will also use FAR Provision 52.215-22 for any proposal in which it applies.

(e) The RFP will be reviewed and any fact finding questions will be review and discussed; once questions have been responded to the satisfaction of the Government. A technical evaluation will be completed, which will identify areas of negotiation.

(f) Cost incurred on any task order not awarded are solely bearable by the contractor as a cost of doing business and in no case shall they be directly invoiced.

(g) The Air Force will select one or all of the following price arrangements for each order: Firm Fixed Priced (FFP), Cost Plus Fixed Fee (CPFF), and/or Cost Reimbursement No Fee (CRNF).

(h) Labor Rates used for each task order, shall be IAW with the rates contained in the Price Schedule incorporated into this Contract in Schedule B. Disputes over labor rates shall be addressed during negotiations and resolved before award of each task order.

(j) Each time the contractor submits a proposal for work under this contract, it must notify the Air Force whether or not it has delivered or is obligated to deliver to the Government under another contract, subcontract, or separate order against this contract, the same, or similar technical data requested. If so, the contract, subcontract, or order, and place of delivery shall be disclosed.

(k) Generally, the only contract clauses included in orders will be those from the parent contract that require specific information. Terms and conditions on individual order’s should vary from the basic contract only to provide more specific detail, instructions, and clarification. In those cases, the more recent and specific information contained in the order will take precedence. If a specific term or condition is needed for a particular order’s circumstance(s) and is not available in the basic contract; the basic contact shall be modified to maintain consistency between the parent contract and order.

(m) For each TO, the contractor shall submit other than certified cost or pricing data in support of any proposal up to the threshold for certified cost or pricing data, and shall submit certified cost or pricing data in support of any proposal over the threshold unless it is determined that an exception may be applied.

PART II - CONTRACT CLAUSES

SECTION I

CONTRACT CLAUSES

252.201-7000 CONTRACTING OFFICER'S REPRESENTATIVE (DEC 1991)

(IAW DFARS 201.602-70)

5352.201-9101 OMBUDSMAN (OCT 2012)

(IAW AFFARS 5301.9103)

(c) If resolution cannot be made by the contracting officer, interested party may contact the Center/MAJCOM/DRU or AFISRA ombudsmen, Kevin Flinders at 801 777 -6549 , FAX 801 777 -6830 , email kevin.flinders@hill.af.mil .

Concerns, issues, disagreements, and recommendations that cannot be resolved at the Center/MAJCOM/DRU or AFISRA level, may be brought by the interested party for further consideration to the Air Force ombudsman, Associate Deputy Assistant Secretary (ADAS) (Contracting), SAF/AQC, 1060 Air Force Pentagon, Washington DC 20330-1060, phone number (571) 256-2397, facsimile number (571) 256-2431.

52.202-1 DEFINITIONS (JAN 2012)

(IAW FAR 2.201)

52.203-3 GRATUITIES (APR 1984)

(IAW FAR 3.202)

52.203-5 COVENANT AGAINST CONTINGENT FEES (APR 1984)

(IAW FAR 3.404)

52.203-6 RESTRICTIONS ON SUBCONTRACTOR SALES TO THE GOVERNMENT (SEP 2006)

(IAW FAR 3.503-2)

52.203-7 ANTI-KICKBACK PROCEDURES (OCT 2010)

(IAW FAR 3.502-3)

52.203-8 CANCELLATION, RESCISSION, AND RECOVERY OF FUNDS FOR ILLEGAL OR

IMPROPER ACTIVITY (JAN 1997)

(IAW FAR 3.104-9(a))

52.203-10 PRICE OR FEE ADJUSTMENT FOR ILLEGAL OR IMPROPER ACTIVITY (JAN 1997)

(IAW FAR 3.104-9(b))

52.203-12 LIMITATION ON PAYMENTS TO INFLUENCE CERTAIN FEDERAL TRANSACTIONS

(OCT 2010)

(IAW FAR 3.808(b))

52.203-13 CONTRACTOR CODE OF BUSINESS ETHICS AND CONDUCT (APR 2010)

(IAW FAR 3.1004(a))

252.203-7000 REQUIREMENTS RELATING TO COMPENSATION OF FORMER DOD OFFICIALS

(SEP 2011)

(IAW DFARS 203.171-4)

252.203-7001 PROHIBITION ON PERSONS CONVICTED OF FRAUD OR OTHER

DEFENSE-CONTRACT-RELATED FELONIES (DEC 2008)

(IAW DFARS 203.570-3)

252.203-7002 REQUIREMENT TO INFORM EMPLOYEES OF WHISTLEBLOWER RIGHTS

(JAN 2009)

(IAW DFARS 203.970)

252.203-7003 AGENCY OFFICE OF THE INSPECTOR GENERAL (DEC 2012)

(IAW DFARS 203.1004(a))

52.204-4 PRINTED OR COPIED DOUBLE-SIDED ON RECYCLED PAPER (MAY 2011)

(IAW FAR 4.303)

52.204-9 PERSONAL IDENTITY VERIFICATION OF CONTRACTOR PERSONNEL (JAN 2011)

(IAW FAR 4.1303)

52.204-10 REPORTING EXECUTIVE COMPENSATION AND FIRST-TIER SUBCONTRACT

AWARDS (AUG 2012)

(IAW FAR 4.1403(a))

252.204-7003 CONTROL OF GOVERNMENT PERSONNEL WORK PRODUCT (APR 1992)

(IAW DFARS 204.404-70(b))

252.204-7006 BILLING INSTRUCTIONS (OCT 2005)

(IAW DFARS 204.7109)

252.204-7008 EXPORT-CONTROLLED ITEMS (APR 2010)

(IAW DFARS 204.7304)

252.205-7000 PROVISION OF INFORMATION TO COOPERATIVE AGREEMENT HOLDERS

(DEC 1991)

(IAW DFARS 205.470)

52.209-6 PROTECTING THE GOVERNMENT'S INTEREST WHEN SUBCONTRACTING WITH

CONTRACTORS DEBARRED, SUSPENDED, OR PROPOSED FOR DEBARMENT

(DEC 2010)

(IAW FAR 9.409)

52.209-9 UPDATES OF PUBLICLY AVAILABLE INFORMATION REGARDING RESPONSIBILITY

MATTERS (FEB 2012)

(IAW FAR 9.104-7(c))

52.209-10 PROHIBITION ON CONTRACTING WITH INVERTED DOMESTIC CORPORATIONS

(MAY 2012)

(IAW FAR 9.108-5(b))

252.209-7004 SUBCONTRACTING WITH FIRMS THAT ARE OWNED OR CONTROLLED BY THE

GOVERNMENT OF A TERRORIST COUNTRY (DEC 2006)

(IAW DFARS 209.409)

52.211-15 DEFENSE PRIORITY AND ALLOCATION REQUIREMENTS (APR 2008)

(IAW FAR 11.604(b)) This is a rated order certified for national defense , emergency preparedness, and energy program use, and the Contractor shall follow all the requirements of the Defense Priorities and Allocations System regulation (15 CFR 700).

252.211-7007 REPORTING OF GOVERNMENT-FURNISHED PROPERTY (AUG 2012)

(IAW DFARS 211.274-6(B))

52.213-1 FAST PAYMENT PROCEDURE (MAY 2006)

(IAW FAR 13.404, FAR 16.703(c)(1)(vi))

52.215-2 AUDIT AND RECORDS--NEGOTIATION (OCT 2010)

(IAW FAR 15.209(b)(1))

52.215-8 ORDER OF PRECEDENCE--UNIFORM CONTRACT FORMAT (OCT 1997)

(IAW FAR 15.209(h), AFFARS 53.15.209(h))

52.215-10 PRICE REDUCTION FOR DEFECTIVE CERTIFIED COST OR PRICING DATA

(AUG 2011)

(IAW FAR 15.408(b))

52.215-12 SUBCONTRACTOR CERTIFIED COST OR PRICING DATA (OCT 2010)

(IAW FAR 15.408(d))

52.215-15 PENSION ADJUSTMENTS AND ASSET REVERSIONS (OCT 2010)

(IAW FAR 15.408(g))

52.215-18 REVERSION OR ADJUSTMENT OF PLANS FOR POSTRETIREMENT BENEFITS (PRB)

OTHER THAN PENSIONS (JUL 2005)

(IAW FAR 15.408(j))

52.215-19 NOTIFICATION OF OWNERSHIP CHANGES (OCT 1997)

(IAW FAR 15.408(k))

52.215-23 LIMITATIONS ON PASS-THROUGH CHARGES (OCT 2009)

(IAW FAR 15.408(n)(2))

252.215-7000 PRICING ADJUSTMENTS (DEC 2012)

(IAW DFARS 215.408(1))

252.215-7002 COST ESTIMATING SYSTEM REQUIREMENTS (DEC 2012)

(IAW DFARS 215.408(2))

52.216-7 ALLOWABLE COST AND PAYMENT (JUN 2011)

(IAW FAR 16.307(a))

(a) Invoicing.

(3) The designated payment office will make interim payments for contract financing on the _30th day

52.216-8 FIXED FEE (JUN 2011)

(IAW FAR 16.307(b))

52.216-11 COST CONTRACT--NO FEE (APR 1984)

(IAW FAR 16.307(e)(1))

52.216-19 ORDER LIMITATIONS (OCT 1995)

(IAW FAR 16.506(b))

(a) Minimum order. When the Government requires supplies or services covered by this contract in an amount of less than TBN, the Government is not obligated to purchase, nor is the Contractor obligated to furnish, those supplies or services under the contract.

(b) Maximum order. The Contractor is not obligated to honor--

(1) Any order for a single item in excess of TBN;

(2) Any order for a combination of items in excess of ; or

(3) A series of orders from the same ordering office within 30 days that together call for quantities exceeding the limitation in subparagraph (b)(1) or (2) of this section.

(c) If this is a requirements contract (i.e., includes the Requirements clause at subsection 52.216-21 of the Federal Acquisition Regulation (FAR)), the Government is not required to order a part of any one requirement from the Contractor if that requirement exceeds the maximum-order limitations in paragraph (b) of this section.

(d) Notwithstanding paragraphs (b) and (c) of this section, the Contractor shall honor any order exceeding the maximum order limitations in paragraph (b), unless that order (or orders) is returned to the ordering office within 30 days after issuance, with written notice stating the Contractor's intent not to ship the item (or items) called for and the reasons.

Upon receiving this notice, the Government may acquire the supplies or services from another source.

(The above Clause/Provision has been modified.)

52.216-22 INDEFINITE QUANTITY (OCT 1995)

(IAW FAR 16.506(e))

(d) Contractor shall not be required to make any deliveries under this contract after .

252.216-7006 ORDERING (MAY 2011)

(IAW DFARS 216.506(a))

(a) Any supplies and services to be furnished under this contract shall be ordered by issuance of delivery orders or task orders by the individuals or activities designated in the contract schedule. Such orders may be issued from .

52.217-2 CANCELLATION UNDER MULTIYEAR CONTRACTS (OCT 1997)

(IAW FAR 17.109(a))

52.217-8 OPTION TO EXTEND SERVICES (NOV 1999)

(IAW FAR 17.208(f)) The Government may require continued performance of any services within the limits and at the rates specified in the contract. These rates may be adjusted only as a result of revisions to prevailing labor rates provided by the Secretary of Labor. The option provision may be exercised more than once, but the total extension of performance hereunder shall not exceed 6 months. The Contracting Officer may exercise the option by written notice to the Contractor within 30 Days.

52.217-9 OPTION TO EXTEND THE TERM OF THE CONTRACT (MAR 2000)

(IAW FAR 17.208(g))

(a) The Government may extend the term of this contract by written notice to the Contractor within 6 Months; provided that the Government gives the Contractor a preliminary written notice of its intent to extend at least 60 days before the contract expires. The preliminary notice does not commit the Government to an extension.

(b) If the Government exercises this option, the extended contract shall be considered to include this option clause.

(c) The total duration of this contract, including the exercise of any options under this clause, shall not exceed This contract will be a 5 year ordering period, with the potential 6 month option. The performance period will be 24 months after the last task order has been awarded.

52.219-8 UTILIZATION OF SMALL BUSINESS CONCERNS (JAN 2011)

(IAW FAR 19.708(a))

52.219-9 SMALL BUSINESS SUBCONTRACTING PLAN (JAN 2011)

(IAW FAR 19.708(b))

52.219-9 SMALL BUSINESS SUBCONTRACTING PLAN -- ALTERNATE II (OCT 2001)

(IAW FAR 19.708(b)(1))

52.219-16 LIQUIDATED DAMAGES--SUBCONTRACTING PLAN (JAN 1999)

(IAW FAR 19.708(b)(2))

52.219-28 POST-AWARD SMALL BUSINESS PROGRAM REREPRESENTATION (APR 2012)

(IAW FAR 19.309(d))

(g) If the Contractor does not have representations and certifications in ORCA, or does not have a representation in ORCA for the NAICS code applicable to this contract, the Contractor is required to complete the following rerepresentation and submit it to the contracting office, along with the contract number and the date on which the rerepresentation was completed:

The Contractor represents that it [ ] is, [ ] is not a small business concern under NAICS Code _____________ assigned to contract number ______________________________.

[Contractor to sign and date and insert authorized signer's name and title].

252.219-7003 SMALL BUSINESS SUBCONTRACTING PLAN (DoD CONTRACTS) (AUG 2012)

(IAW DFARS 219.708(b)(1)(A))

52.222-1 NOTICE TO THE GOVERNMENT OF LABOR DISPUTES (FEB 1997)

(IAW FAR 22.103-5(a), AFFARS 5322.101-1)

52.222-2 PAYMENT FOR OVERTIME PREMIUMS (JUL 1990)

(IAW FAR 22.103-5(b))

(a) overtime premium does not exceed ___*___

*Overtime Premium $ Zero

52.222-3 CONVICT LABOR (JUN 2003)

(IAW FAR 22.202)

52.222-21 PROHIBITION OF SEGREGATED FACILITIES (FEB 1999)

(IAW FAR 22.810(a)(1))

52.222-26 EQUAL OPPORTUNITY (MAR 2007)

(IAW FAR 22.810(e))

52.222-35 EQUAL OPPORTUNITY FOR VETERANS (SEP 2010)

(IAW FAR 22.1310(a)(1), DFARS 222.1310(a)(1))

52.222-36 AFFIRMATIVE ACTION FOR WORKERS WITH DISABILITIES (OCT 2010)

(IAW FAR 22.1408(a))

52.222-37 EMPLOYMENT REPORTS ON VETERANS (SEP 2010)

(IAW FAR 22.1310(b))

52.222-40 NOTIFICATION OF EMPLOYEE RIGHTS UNDER THE NATIONAL LABOR RELATIONS

ACT (DEC 2010)

(IAW FAR 22.1605)

52.222-41 SERVICE CONTRACT ACT OF 1965 (NOV 2007)

(IAW FAR 22.1006(a))

52.222-43 FAIR LABOR STANDARDS ACT AND SERVICE CONTRACT ACT--PRICE

ADJUSTMENT (MULTIPLE YEAR AND OPTION CONTRACTS) (SEP 2009)

(IAW FAR 22.1006(c)(1))

52.222-50 COMBATING TRAFFICKING IN PERSONS (FEB 2009)

(IAW FAR 22.1705(a))

52.222-54 EMPLOYMENT ELIGIBILITY VERIFICATION (JUL 2012)

(IAW FAR 22.1803)

(c) Web site. Information on registration for and use of the E-Verify program can be obtained via the Internet at the Department of Homeland Security Web site: http://www.dhs.gov/E-Verify .

252.222-7006 RESTRICTIONS ON THE USE OF MANDATORY ARBITRATION AGREEMENTS

(DEC 2010)

(IAW DFARS 222.7405)

52.223-5 POLLUTION PREVENTION AND RIGHT-TO-KNOW INFORMATION (MAY 2011)

(IAW FAR 23.1005(a))

52.223-6 DRUG-FREE WORKPLACE (MAY 2001)

(IAW FAR 23.505)

52.223-18 ENCOURAGING CONTRACTOR POLICIES TO BAN TEXT MESSAGING WHILE

DRIVING (AUG 2011)

(IAW FAR 23.1105)

252.223-7006 PROHIBITION ON STORAGE AND DISPOSAL OF TOXIC AND HAZARDOUS

MATERIALS (APR 2012)

(IAW DFARS 223.7103(a))

5352.223-9001 HEALTH AND SAFETY ON GOVERNMENT INSTALLATIONS (OCT 2012)

(IAW AFFARS 5323.9001)

52.225-13 RESTRICTIONS ON CERTAIN FOREIGN PURCHASES (JUN 2008)

(IAW FAR 25.1103(a))

252.225-7004 REPORT OF INTENDED PERFORMANCE OUTSIDE THE UNITED STATES AND

CANADA -- SUBMISSION AFTER AWARD (OCT 2010)

(IAW DFARS 225.7204(b))

252.225-7006 QUARTERLY REPORTING OF ACTUAL CONTRACT PERFORMANCE OUTSIDE THE

UNITED STATES (OCT 2010)

(IAW DFARS 225.7204(c))

252.225-7012 PREFERENCE FOR CERTAIN DOMESTIC COMMODITIES (FEB 2013)

(IAW DFARS 225.7002-3(a))

252.226-7001 UTILIZATION OF INDIAN ORGANIZATIONS, INDIAN-OWNED ECONOMIC

ENTERPRISES, AND NATIVE HAWAIIAN SMALL BUSINESS CONCERNS (SEP 2004)

(IAW DFARS 226.104)

52.227-1 AUTHORIZATION AND CONSENT (DEC 2007)

(IAW FAR 27.201-2(a)(1))

52.227-2 NOTICE AND ASSISTANCE REGARDING PATENT AND COPYRIGHT INFRINGEMENT

(DEC 2007)

(IAW FAR 27.201-2(b))

252.227-7013 RIGHTS IN TECHNICAL DATA--NONCOMMERCIAL ITEMS (MAY 2013)

(IAW DFARS 227.7102-4(b), DFARS 227.7103-6(a), DFARS 212.7003(b)(1))

(e) (3) The Contractor asserts for itself, or the persons identified below, that the Government's rights to use, release, or disclose the following technical data should be restricted—

Technical Data to be Furnished With Restrictions*

Basis for Assertion**

Asserted Rights Category***

Name of person Asserting Restrictions****

(LIST) (LIST) (LIST) (LIST)

*If the assertion is applicable to items, components, or processes developed at private expense, identify both the data and each such item, component, or process.

**Generally, the development of an item, component, or process at private expense, either exclusively or partially, is the only basis for asserting restrictions on the Government's rights to use, release, or disclose technical data pertaining to such items, components, or processes. Indicate whether development was exclusively or partially at private expense. If development was not at private expense, enter the specific reason for asserting that the Government's rights should be restricted.

***Enter asserted rights category (e.g., government purpose license rights from a prior contract, rights in SBIR data generated under another contract, limited or government purpose rights under this or a prior contract, or specifically negotiated licenses).

****Corporation, individual, or other person, as appropriate.

Date ___________________________________ Printed Name ___________________________________ and Title ___________________________________ Signature ___________________________________

(End of identification and assertion)

(f) (2) Government purpose rights markings.

Data delivered or otherwise furnished to the Government purpose rights shall be marked as follows:

GOVERNMENT PURPOSE RIGHTS

Contract No __________________________________ Contractor Name __________________________________ Contractor Address

Expiration Date __________________________________

The Government's rights to use, modify, reproduce, release, perform, display, or disclose these technical data are restricted by paragraph (b)(2) of the Rights in Technical Data--Noncommercial Items clause contained in the above identified contract. No restrictions apply after the expiration date shown above. Any reproduction of technical data or portions thereof marked with this legend must also reproduce the markings.

(End of Legend)

(3) Limited rights markings.

Data delivered or otherwise furnished to the Government with limited rights shall be marked with the following legend:

LIMITED RIGHTS

Contract No __________________________________ Contractor Name __________________________________ Contractor Address __________________________________

The Government's rights to use, modify, reproduce, release, perform, display, or disclose these technical data are restricted by paragraph (b)(3) of the Rights in Technical Data--Noncommercial Items clause contained in the above identified contract. Any reproduction of technical data or portions thereof marked with this legend must also reproduce the markings. Any person, other than the Government, who has been provided access to such data must promptly notify the above name Contractor.

(End of legend)

(4) Special license rights markings.

(i) Data in which the Government's rights stem from a specifically negotiated license shall be marked with the following legend:

SPECIAL LICENSE RIGHTS

The Government's rights to use, modify, reproduce, release, perform, display, or disclose these data are restricted by Contract No. __________ (Insert contract number)_______, License No. __________ (Insert license identifier)______. Any reproduction of technical data or portions thereof marked with this legend must also reproduce the markings.

(End of legend)

252.227-7016 RIGHTS IN BID OR PROPOSAL INFORMATION (JAN 2011)

(IAW DFARS 227.7103-6(e)(1), DFARS 227.7104(e)(1), DFARS 227.7203-6(b))

252.227-7025 LIMITATIONS ON THE USE OR DISCLOSURE OF GOVERNMENT-FURNISHED

INFORMATION MARKED WITH RESTRICTIVE LEGENDS (MAY 2013)

(IAW DFARS 227.7103-6(c), DFARS 227.7104(f)(1), DFARS 227.7203-6(d))

252.227-7030 TECHNICAL DATA--WITHHOLDING OF PAYMENT (MAR 2000)

(IAW DFARS 227.7103-6(e)(2), DFARS 227.7104(e)(4))

(a) the Contracting Officer may until such data is accepted by the Government, withhold payment to the Contractor of ten percent (10%) of the total contract price or amount

252.227-7037 VALIDATION OF RESTRICTIVE MARKINGS ON TECHNICAL DATA (JUN 2012)

(IAW DFARS 227.7102-3, DFARS 227.7103-6(e)(3), DFARS 227.7104(e)(5), DFARS 227.7203-6(f))

52.228-5 INSURANCE--WORK ON A GOVERNMENT INSTALLATION (JAN 1997)

(IAW FAR 28.310)

52.228-7 INSURANCE--LIABILITY TO THIRD PERSONS (MAR 1996)

(IAW FAR 28.311-1)

52.229-4 FEDERAL, STATE, AND LOCAL TAXES (STATE AND LOCAL ADJUSTMENTS)

(FEB 2013)

(IAW FAR 29.401-3(b))

52.230-2 COST ACCOUNTING STANDARDS (MAY 2012)

(IAW FAR 30.201-4(a))

52.230-6 ADMINISTRATION OF COST ACCOUNTING STANDARDS (JUN 2010)

(IAW FAR 30.201-4(d)(1))

252.231-7000 SUPPLEMENTAL COST PRINCIPLES (DEC 1991)

(IAW DFARS 231.100-70)

52.232-1 PAYMENTS (APR 1984)

(IAW FAR 32.111(a)(1))

52.232-8 DISCOUNTS FOR PROMPT PAYMENT (FEB 2002)

(IAW FAR 32.111(b)(1))

52.232-11 EXTRAS (APR 1984)

(IAW FAR 32.111(c)(2))

52.232-17 INTEREST (OCT 2010)

(IAW FAR 32.611(a), FAR 32.611(b))

52.232-20 LIMITATION OF COST (APR 1984)

(IAW FAR 32.705-2(a))

52.232-22 LIMITATION OF FUNDS (APR 1984)

(IAW FAR 32.706-2(b))

52.232-23 ASSIGNMENT OF CLAIMS (JAN 1986)

(IAW FAR 32.806(a)(1))

52.232-25 PROMPT PAYMENT (OCT 2008)

(IAW FAR 32.908(c))

(a) Invoice payments—

(5) Computing penalty amount. The Government will compute the interest penalty in accordance with the Office of Management and Budget prompt payment regulations at 5 CFR part 1315.

(i) For the sole purpose of computing an interest penalty that might be due the Contractor, Government acceptance is deemed to occur constructively on the 7th day (unless otherwise specified in this contract) after the Contractor delivers the supplies or performs the services in accordance with the terms and conditions of the contract, unless there is a disagreement over quantity, quality, or Contractor compliance with a contract provision. If actual acceptance occurs within the constructive acceptance period, the Government will base the determination of an interest penalty on the actual date of acceptance. The constructive acceptance requirement does not, however, compel Government officials to accept supplies or services, perform contract administration functions, or make payment prior to fulfilling their responsibilities.

52.232-32 PERFORMANCE-BASED PAYMENTS (APR 2012)

(IAW FAR 32.1005)

(c) Approval and payment of requests.

The designated payment office will pay approved requests on the 30th day after receipt of the request for performance-based payment by the designated payment office.

(m) Content of Contractor's certification.

I certify to the best of my knowledge and belief that—

(1) This request for performance-based payment is true and correct; this request (and attachments) has been prepared from the books and records of the Contractor, in accordance with the contract and the instructions of the Contracting Officer;

(2) (Except as reported in writing on _____ _____), all payments to subcontractors and suppliers under this contract have been paid, or will be paid, currently, when due in the ordinary course of business;

(3) There are no encumbrances (except as reported in writing on __________) against the property acquired or produced for, and allocated or properly chargeable to, the contract which would affect or impair the Government's title;

(4) There has been no materially adverse change in the financial condition of the Contractor since the submission by the Contractor to the Government of the most recent written information dated __________;

and

(5) After the making of this requested performance-based payment, the amount of all payments for each deliverable item for which performance-based payments have been requested will not exceed any limitation in the contract, and the amount of all payments under the contract will not exceed any limitation in the contract.

52.232-33 PAYMENT BY ELECTRONIC FUNDS TRANSFER--CENTRAL CONTRACTOR

REGISTRATION (OCT 2003)

(IAW FAR 32.1110(a)(1))

252.232-7003 ELECTRONIC SUBMISSION OF PAYMENT REQUESTS AND RECEIVING REPORTS

(JUN 2012)

(IAW DFARS 232.7004)

(a) Definitions. As used in this clause—

(1) “Contract financing payment” and “invoice payment” have the meanings given in section 32.001 of the Federal Acquisition Regulation.

(2) “Electronic form” means any automated system that transmits information electronically from the initiating system to all affected systems. Facsimile, e-mail, and scanned documents are not acceptable electronic forms for submission of payment requests. However, scanned documents are acceptable when they are part of a submission of a payment request made using Wide Area WorkFlow (WAWF) or another electronic form authorized by the Contracting Officer.

(3) “Payment request” means any request for contract financing payment or invoice payment submitted by the Contractor under this contract.

(b) Except as provided in paragraph (c) of this clause, the Contractor shall submit payment requests and receiving reports using WAWF, in one of the following electronic formats that WAWF accepts: Electronic Data Interchange, Secure File Transfer Protocol, or World Wide Web input. Information regarding WAWF is available on the Internet at https://wawf.eb.mil/ .

(c) The Contractor may submit a payment request and receiving report using other than WAWF only when—

(1) The Contracting Officer authorizes use of another electronic form. With such an authorization, the Contractor and the Contracting Officer shall agree to a plan, which shall include a timeline, specifying when the Contractor will transfer to WAWF;

(2) DoD is unable to receive a payment request or provide acceptance in electronic form;

(3) The Contracting Officer administering the contract for payment has determined, in writing, that electronic submission would be unduly burdensome to the Contractor. In such cases, the Contractor shall include a copy of the Contracting Officer’s determination with each request for payment; or

(4) DoD makes a payment for commercial transportation services provided under a Government rate tender or a contract for transportation services using a DoD-approved electronic third party payment system or other exempted vendor payment/invoicing system (e.g., PowerTrack, Transportation Financial Management System, and Cargo and Billing System).

(d) The Contractor shall submit any non-electronic payment requests using the method or methods specified in Section G of the contract.

(e) In addition to the requirements of this clause, the Contractor shall meet the requirements of the appropriate payment clauses in this contract when submitting payment requests.

252.232-7010 LEVIES ON CONTRACT PAYMENTS (DEC 2006)

(IAW DFARS 232.7102)

52.233-1 DISPUTES (JUL 2002)

(IAW FAR 33.215)

52.233-1 DISPUTES -- ALTERNATE I (DEC 1991)

(IAW FAR 33.215, DFARS 233.215)

52.233-3 PROTEST AFTER AWARD (AUG 1996)

(IAW FAR 33.106(b))

52.233-3 PROTEST AFTER AWARD -- ALTERNATE I (JUN 1985)

(IAW FAR 33.106(b))

52.233-4 APPLICABLE LAW FOR BREACH OF CONTRACT CLAIM (OCT 2004)

(IAW FAR 33.215(b))

52.237-2 PROTECTION OF GOVERNMENT BUILDINGS, EQUIPMENT, AND VEGETATION

(APR 1984)

(IAW FAR 37.110(b))

252.237-7010 PROHIBITION ON INTERROGATION OF DETAINEES BY CONTRACTOR PERSONNEL

(NOV 2010)

(IAW DFARS 237.173-5)

252.237-7023 CONTINUATION OF MISSION ESSENTIAL FUNCTIONS (OCT 2010)

(IAW DFARS 237.7603(a))

(b) The Government has identified all or a portion of the Contractor services performed under this Contract as essential contractor services in support of mission essential functions. These services are listed in attachment IAW PWS 4.7.5 , Mission Essential Contractor Services, dated 00 - *** - 0000 .

52.242-1 NOTICE OF INTENT TO DISALLOW COSTS (APR 1984)

(IAW FAR 42.802)

52.242-2 PRODUCTION PROGRESS REPORTS (APR 1991)

(IAW FAR 42.1107)

52.242-4 CERTIFICATION OF FINAL INDIRECT COSTS (JAN 1997)

(IAW FAR 42.703-2(f))

(c) The certificate of final indirect costs shall read as follows:

CERTIFICATE OF FINAL INDIRECT COSTS

This is to certify that I have reviewed this proposal to establish final indirect cost rates and to the best of my knowledge and belief:

1. All costs included in this proposal (identify proposal and date) to establish final indirect costs rates for (identify period covered by rate) are allowable in accordance with the cost principles of the Federal Acquisition Regulation (FAR) and its supplements applicable to the contracts to which the final indirect cost rates will apply; and

2. This proposal does not include any costs which are expressly unallowable under applicable cost principles of the FAR or its supplements.

Firm: ___________________________________________________ Signature: _______________________________________________ Name of Certifying Official: __________________________________ Title: ____________________________________________________ Date of Execution: _________________________________________

52.242-13 BANKRUPTCY (JUL 1995)

(IAW FAR 42.903)

252.242-7004 MATERIAL MANAGEMENT AND ACCOUNTING SYSTEM (MAY 2011)

(IAW DFARS 242.7204)

252.242-7005 CONTRACTOR BUSINESS SYSTEMS (FEB 2012)

(IAW DFARS 242.7001)

5352.242-9000 CONTRACTOR ACCESS TO AIR FORCE INSTALLATIONS (AUG 2007)

(IAW AFFARS 5342.490-1)

(a) The contractor shall obtain base identification and vehicle passes, if required, for all contractor personnel who make frequent visits to or perform work on the Air Force installation(s) cited in the contract. Contractor personnel are required to wear or prominently display installation identification badges or contractor-furnished, contractor identification badges while visiting or performing work on the installation.

(b) The contractor shall submit a written request on company letterhead to the contracting officer listing the following:

contract number, location of work site, start and stop dates, and names of employees and subcontractor employees needing access to the base. The letter will also specify the individual(s) authorized to sign for a request for base identification credentials or vehicle passes. The contracting officer will endorse the request and forward it to the issuing base pass and registration office or Security Forces for processing. When reporting to the registration office, the authorized contractor individual(s) should provide a valid driver's license, current vehicle registration, valid vehicle insurance certificate, and When reporting to the registration office, the authorized contractor individual(s) should provide a valid driver's license, current vehicle registration, valid vehicle insurance certificate, and Shall comply with the site's requirement, but at a minimum, the contractor must: 1. Appear in person, 2.

Provide two forms of identity source documents in original form. The identity source documents must come from the list of acceptable documents include in Form I-9, OMB No. 1115-0136, Employment Eligibility Varification. At least one document shall be a valid State or Federal Government-issued picture identification.

to obtain a vehicle pass.

(c) During performance of the contract, the contractor shall be responsible for obtaining required identification for newly assigned personnel and for prompt return of credentials and vehicle passes for any employee who no longer requires access to the work site.

(d) When work under this contract requires unescorted entry to controlled or restricted areas, the contractor shall comply with When work under this contract requires unescorted entry to controlled or restricted areas, the contractor shall comply withthe instructions in (b) above and any base specific requiremts, plus: 1. Meet the requirements for successful adjudication of a National Agency Check (NAC), National agency Check with Written Inquiries (NACI), or other OPM or National Security community investigation as required for Federal employment, 2. Obtain security awareness training prior to the start of contract performance, 3. Provide a completed and appropriately signed DD Form 1172-2 verifying/authorizing issuance of a common access card; if access to DoD networks is not required, provide a properly completed and signed AFMC Form 496 citing the appropriate paragraphs as applicable.

(e) Upon completion or termination of the contract or expiration of the identification passes, the prime contractor shall ensure that all base identification passes issued to employees and subcontractor employees are returned to the issuing office.

(f) Failure to comply with these requirements may result in withholding of final payment.

5352.242-9001 COMMON ACCESS CARDS (CAC) FOR CONTRACTOR PERSONNEL (AUG 2004)

(IAW AFFARS 5342.490-2)

52.243-1 CHANGES--FIXED-PRICE (AUG 1987)

(IAW FAR 43.205(a)(1))

52.243-1 CHANGES--FIXED-PRICE -- ALTERNATE I (APR 1984)

(IAW FAR 43.205(a)(2))

52.243-2 CHANGES--COST-REIMBURSEMENT (AUG 1987)

(IAW FAR 43.205(b)(1))

52.243-2 CHANGES--COST-REIMBURSEMENT -- ALTERNATE I (APR 1984)

(IAW FAR 43.205(b)(2))

52.243-7 NOTIFICATION OF CHANGES (APR 1984)

(IAW FAR 43.107)

(b) the Contractor shall notify the Administrative Contracting Officer in writing promptly, within 30 calendar days

(d) The Contracting Officer shall promptly, within 30 calendar days

252.243-7001 PRICING OF CONTRACT MODIFICATIONS (DEC 1991)

(IAW DFARS 243.205-70)

252.243-7002 REQUESTS FOR EQUITABLE ADJUSTMENT (DEC 2012)

(IAW DFARS 243.205-71)

52.244-2 SUBCONTRACTS (OCT 2010)

(IAW FAR 44.204(a)(1), FAR 44.204(a)(3))

(d) If the Contractor has an approved purchasing system, the Contractor nevertheless shall obtain the Contracting Officer's written consent before placing the following subcontracts:

Subcontracts

(j) Paragraphs (c) and (e) of this clause do not apply to the following subcontracts, which were evaluated during negotiations:

Subcontracts

52.244-5 COMPETITION IN SUBCONTRACTING (DEC 1996)

(IAW FAR 44.204(c)) (Applicable exceeding the simplified acquisition threshold when the order/contract results from noncompetitive procedures)

52.244-6 SUBCONTRACTS FOR COMMERCIAL ITEMS (DEC 2010)

(IAW FAR 44.403)

252.244-7001 CONTRACTOR PURCHASING SYSTEM ADMINISTRATION (JUN 2012)

(IAW DFARS 244.305-71)

52.245-1 GOVERNMENT PROPERTY (APR 2012)

(IAW FAR 45.107(a), DFARS 237.7003(c), DFARS 245.107)

52.245-1 GOVERNMENT PROPERTY - ALTERNATE I (APR 2012)

(IAW FAR 45.107(a)(2), DFARS 237.7003(c), DFARS 245.107(6))

52.245-1 GOVERNMENT PROPERTY - ALTERNATE II (APR 2012)

(IAW FAR 45.107(a)(3))

52.24…