DD254-Final.pdf

For the best experience, open this PDF portfolio in

Acrobat X or Adobe Reader X, or later.

Get Adobe Reader Now!

http://www.adobe.com/go/reader

Reference DD Form 254 Items 13, 14 & 17

Solicitation #FD2020-16-50183

Item 13

Ref Item 8.a: The contractor work performance locations revolves between USAF ICBM Wings at Malstrom AFB, MT, F.E. Warren AFB, WY, and Minot AFB, ND. Work will also be conducted at contractor identified facilities to be determined upon contract award.

Ref Item 10.a: COMSEC safeguarding requirements apply. See the NISPOM chapter 9, section 4 for details. For on-base performance, COMSEC is incumbent on the government. Access on a government installation is granted by the user agency. Access to COMSEC information is restricted to U.S. Citizens holding a final U.S. government clearance. Personnel must receive the required COMSEC briefing. Prior approval is required from the Government Contracting Activity prior to granting access to COMSEC information to a subcontractor. Contractor will comply with Air Force COMSEC guidance.

Ref Item 10.b: The contractor is permitted access to RESTRICTED DATA (RD) in performance of this contract. Access to RD requires a final U.S. Government clearance at the appropriate level.

Ref Item 10.c: The contractor is permitted access to Critical Nuclear Weapon Design Information (CNWDI) in performance of this contract. Access to CNWDI requires a special briefing and debriefing. The government program manager or designated representative will ensure contractor employees are briefed for CNWDI. Prior to granting subcontractors access to CNWDI approval must be obtained from the Government Contracting Activity.

Ref Item 10.d: The contractor is permitted access to FORMERLY RESTRICTED DATA (FRD) in performance of this contract. Access to FRD requires a final U.S. Government clearance at the appropriate level.

Ref Item 10.e(2): Contractor will be required to and must comply with the Director of Intelligence Directives (DCID) 6/6, AFI 14-303, Release of Intelligence to U.S. Contractors, and AFI 14-303, AFMC Sup 1.

Ref Item 10.j: FOUO information provided under this contract shall be safeguarded as specified in DOD Manual 5200.01, Volume 4, DoD Information Security Program: Controlled Unclassified Information (CUI).”

Ref Item 10.k: The contractor is permitted access to Nuclear Command and Control – Extremely Sensitive Information (NC2-ESI) in performance of this contract. Access to NC2-ESI Information requires a final U.S. Government clearance at the appropriate level. The servicing NC2-ESI Program Manager will ensure the contractor Facility Security Officer and concerned employees are briefed prior to access being granted. Prior approval of the contracting office is required for subcontracting.

Refer to AFI 13-502, Safeguarding Nuclear Command and Control Extremely Sensitive Information (NC2-ESI), for additional security requirements.

Ref Item 11.c: The Defense Security Services (DSS) is relieved of all industrial security review responsibilities for contractor performance on government installations identified in Items 8.a. The

SSAs, identified in Items 8.c have exclusive oversight responsibilities while operating on the Air Force Installation

Ref Item 11.d: The contractor must provide adequate storage for classified hardware and materials to the level of Top Secret which exceeds 2 cubic feet and is of size and quantity that it cannot be safeguarded in a General Service Administration (GSA) approved security container.”

Ref Item 11.h: COMSEC safeguarding requirements apply. See the NISPOM chapter 9, section 4 for details. For on-base performance, COMSEC is incumbent on the government.

Ref Item 11.i: See attached Emission Security (EMSEC) addendum to the DD Form 254 for requirements and guidance.

Ref Item 11.k: This contract requires the use of the Defense Courier Service (DCS). The government contracting activity will request written approval for DCS services from the Commander, Defense Courier Service, ATTN: Operations Divisions, Fort George G. Meade, MD 20755-5370. Prior approval is required from the contracting activity, prior to authorizing a subcontractor to utilized DCS services.

Ref Item 11.l: For performance on government installations the contractor will provide the information requested by the Notification of Government Security Activity and Visitor Group Security Agreements Clause, Air Force Federal Acquisition Regulation Supplement 5352.204-9000, to the Servicing Security Activity addresses, listed in Items 8.c, at least 30 days prior to beginning operations. Refer to AFFARS 5352.204-9000 attachment for this clause.

Item 14

Ref Item 10.e.(2): See attached non-SCI Release of Intelligence Information for additional security requirements. Contractor will require access to intelligence information and must comply with AF 14-303/AFMC Supplement 1. The Program Manager has determined that disclosure does not create an unfair competitive advantage for the contractor or a conflict of interest with the contractor's obligation to protect the information. Program manager will document the release of intelligence information to the contractor. Prior approval of the contracting activity is required for subcontracting. Access to intelligence information requires special briefings and a final U.S.

Government clearance at the appropriate level.” AFLCMC/INL (SSO Hill), 801-777-0484.

Item 17

Ref Item 17.f: OO-ALC/TICS & 75 ABW/SCXS

341 SW/IP

7410 Flightline Drive Malstrom AFB, MT 59402-7533

90 SW/IP

7101 Garrison Loop F.E. Warren AFB, WY 82005-3933

5 BW/IP

201 Summit Drive, Suite 1

Minot AFB, ND 58705-5012

EMSEC

Emission Security (EMSEC) Requirements

FD2020 16-50183

EMISSIONS SECURITY ASSESSMENT REQUEST (ESAR)

FOR ALL CLASSIFIED SYSTEMS

1. The contractor shall ensure that compromising emanations (EMSEC) conditions related to this contract are minimized.

2. The contractor shall provide countermeasures assessment data to the Contracting Officer (CO), in the form of an ESAR. The ESAR shall provide only specific responses to the date required in paragraph c, below. The contractor’s standard security plan shall NOT be used as a “stand-alone” ESAR response. The contractor shall NOT submit a detailed facility analysis/assessment. The ESAR information will be used to complete an EMSEC Countermeasures Assessment Review of the contractor’s facility to be performed by the government EMSEC authority using current Air Force EMSEC directives. EMSEC is applied on a case-by-case basis and further information may be required to complete the review. Should this be the case, the contractor shall provide this information to the contracting officer when requested. After the evaluation of the ESAR by the government EMSEC authority, additional EMSEC requirements may be established.

3. ESAR contents shall include, as a minimum, the following information (NISPOM, paragraph 11- 101c) (Note: A copy of your Automated Information System Security Plan(s) (AISSP) will suffice.

a. The specific classification and special categories of material to be processed or handled by electronic means.

b. The specific location where classified processing will be performed.

c. The name, address, title and telephone number of a point-of-contact at the facility where processing will occur.

NOTE: Once the above information has been provided to the CO, no further reporting is required for equipment reconfigurations. However, if the facility is physically relocated to another geographical location, the information requested in paragraph c above MUST be furnished to the CO.

4. The prime contractor shall ensure that all subcontractors and/or vendors comply with EMSEC requirements when performing classified processing related to this contract. They will provide the above documentation through their prime to the contracting officer to complete the ESAR.

Non-Sensitive Compartmented Information (SCI)

Reference DD Form 254 Item 10e (2)

1. Special Requirements of Intelligence Information: The contractor will require access to, and receipt of, classified intelligence documents in the performance of this contract. In addition to the requirements and controls for classified material in DoD 5220.22-M, National Industrial Security Program Operating Manual (NISPOM), the contractor shall adhere to the following requirements and controls of intelligence, per AFI 14-303 and applicable supplements.

2. Contact AFLCMC/INL 6137 Wardleigh Rd., Hill AFB UT 84056-5843, for permission to make extra copies of intelligence data required by the contractor if approval has not previously been stipulated above, or been stipulated in the release letter. The Contract Monitor (CM) then maintains accountability of copies and ensures all information is returned to the Air Force upon contract termination/expiration.

3. Maintain a record of all intelligence materials released to the contractor, and ensures all data is returned to the CM within 2 years after final delivery of goods and services or after completion or termination of the classified contract, whichever comes first. If retention is required beyond the 2 year period the contractor must request and receive written authority from the CM.

4. Contractor shall maintain accountability for all intelligence released in his/her custody.

Contractors must agree that all intelligence data released to them, all reproductions, and other material generated (including authorized reproductions) is the property of the US Government and will be returned upon request of the sponsoring agency or expiration date of the contract, whichever comes first.

5. Contractor shall not reproduce intelligence without permission from the Unit IN (AFLCMC/INL) through the CM. If approved, must control each copy in the same manner as the original.

6. Contractor shall not reproduce intelligence without advance approval from the CM, except for working papers and derivative material produced in the publication process. Working papers and derivative material produced in the publication process do not need destruction approval.

7. Contractor shall restrict access to those individuals with a valid need-to-know who are actually providing services under the contract. Further dissemination to other contractors, subcontractors, or other government agencies and private individuals or organizations is prohibited unless authorized in writing by the CM with prior approval of the Unit IN (AFLCMC/INL)/contracting activity.

8. Contractor shall not release intelligence data to foreign nationals or immigrant aliens regardless of their security clearance or contract status without advanced written permission from the CM, Unit IN (AFLCMC/INL), Foreign Disclosure Policy Office, and HQ AFMC/A2OS.

9. Contractor shall ensure the each employee having access to intelligence material is fully aware of the special security requirements for this material and maintains records in a manner that permits the contractor to furnish on demand the names of individuals who have access to the material in their custody.

10. Contractor shall restrict access to those individuals with a valid need-to-know who are actually providing services under the contract. Further dissemination to other contractors, subcontractors, or other government agencies and private individuals or organizations is prohibited unless authorized in writing by the CM with prior approval of the Unit IN (AFLCMC/INL)/contracting activity.

Operations Security (OPSEC) DD Form 254 Addendum

OPSEC

All contractors, subcontractors, their employees, associates, and consultants who have access to critical information must comply with the Air Force-sponsored Operations Security (OPSEC) program.

OPSEC is a systematic means of identifying and protecting information which an adversary could use to their advantage or to our disadvantage. Critical Information (CI) is generally unclassified but sensitive information which has been identified by the OPSEC program as requiring protection.

OPSEC Measures (OM) are control standards with which all personnel must comply in order to protect critical information.

Responsibilities:

The AFNWC/NIE must provide / approve OPSEC training curriculum for use by the contractor.

Training must provide listings of critical information that must be protected by all personnel, listings of OPSEC measures which must be used by all personnel to protect critical information, and current foreign intelligence and industrial espionage threats. The contractor must ensure all personnel working on the contract or having access to critical information attend initial and annually recurring refresher training and that the approved curriculum is presented. Training must be provided before personnel are allowed access to critical information. All personnel must comply with OPSEC standards and practices as trained. Additional training may be required based on updates to critical information, OPSEC measures, intelligence threat, or other fundamental changes to the OPSEC program.

The contractor must track OPSEC training statistics to include the personnel working on the contract, when each individual received the required OPSEC training, and when refresher training is due.

Training statistics must be forwarded to AFNWC/NIE at the end of each calendar quarter and upon request.

Prior to seeking approval through Hill AFB Public Affairs, any information to be released outside of official U.S. Government channels, via any media, must be approved through an OPSEC review by AFNWC/NIE. All personnel must promptly report OPSEC related incidents, issues, and concerns to

AFNWC/NIE.

Prime Contract or Solicitation #: FD2020-16-50183

EMSEC

Emission Security (EMSEC) Requirements

EMISSIONS SECURITY ASSESSMENT REQUEST (ESAR)

FOR ALL CLASSIFIED SYSTEMS

1. The contractor shall ensure that compromising emanations (EMSEC) conditions related to this contract are minimized.

2. The contractor shall provide countermeasures assessment data to the Contracting Officer (CO), in the form of an ESAR. The ESAR shall provide only specific responses to the date required in paragraph c, below. The contractor’s standard security plan shall NOT be used as a “stand-alone” ESAR response. The contractor shall NOT submit a detailed facility analysis/assessment. The ESAR information will be used to complete an EMSEC Countermeasures Assessment Review of the contractor’s facility to be performed by the government EMSEC authority using current Air Force EMSEC directives. EMSEC is applied on a case-by-case basis and further information may be required to complete the review. Should this be the case, the contractor shall provide this information to the contracting officer when requested. After the evaluation of the ESAR by the government EMSEC authority, additional EMSEC requirements may be established.

3. ESAR contents shall include, as a minimum, the following information (NISPOM, paragraph 11- 101c) (Note: A copy of your Automated Information System Security Plan(s) (AISSP) will suffice.

a. The specific classification and special categories of material to be processed or handled by electronic means.

b. The specific location where classified processing will be performed.

c. The name, address, title and telephone number of a point-of-contact at the facility where processing will occur.

NOTE: Once the above information has been provided to the CO, no further reporting is required for equipment reconfigurations. However, if the facility is physically relocated to another geographical location, the information requested in paragraph c above MUST be furnished to the CO.

4. The prime contractor shall ensure that all subcontractors and/or vendors comply with EMSEC requirements when performing classified processing related to this contract. They will provide the above documentation through their prime to the contracting officer to complete the ESAR.

Non-Sensitive Compartmented Information (SCI)

Reference DD Form 254 Item 10e (2)

1. Special Requirements of Intelligence Information: The contractor will require access to, and receipt of, classified intelligence documents in the performance of this contract. In addition to the requirements and controls for classified material in DoD 5220.22-M, National Industrial Security Program Operating Manual (NISPOM), the contractor shall adhere to the following requirements and controls of intelligence, per AFI 14-303 and applicable supplements.

2. Contact AFLCMC/INL 6137 Wardleigh Rd., Hill AFB UT 84056-5843, for permission to make extra copies of intelligence data required by the contractor if approval has not previously been stipulated above, or been stipulated in the release letter. The Contract Monitor (CM) then maintains accountability of copies and ensures all information is returned to the Air Force upon contract termination/expiration.

3. Maintain a record of all intelligence materials released to the contractor, and ensures all data is returned to the CM within 2 years after final delivery of goods and services or after completion or termination of the classified contract, whichever comes first. If retention is required beyond the 2 year period the contractor must request and receive written authority from the CM.

4. Contractor shall maintain accountability for all intelligence released in his/her custody.

Contractors must agree that all intelligence data released to them, all reproductions, and other material generated (including authorized reproductions) is the property of the US Government and will be returned upon request of the sponsoring agency or expiration date of the contract, whichever comes first.

5. Contractor shall not reproduce intelligence without permission from the Unit IN (AFLCMC/INL) through the CM. If approved, must control each copy in the same manner as the original.

6. Contractor shall not reproduce intelligence without advance approval from the CM, except for working papers and derivative material produced in the publication process. Working papers and derivative material produced in the publication process do not need destruction approval.

7. Contractor shall restrict access to those individuals with a valid need-to-know who are actually providing services under the contract. Further dissemination to other contractors, subcontractors, or other government agencies and private individuals or organizations is prohibited unless authorized in writing by the CM with prior approval of the Unit IN (AFLCMC/INL)/contracting activity.

8. Contractor shall not release intelligence data to foreign nationals or immigrant aliens regardless of their security clearance or contract status without advanced written permission from the CM, Unit IN (AFLCMC/INL), Foreign Disclosure Policy Office, and HQ AFMC/A2OS.

9. Contractor shall ensure the each employee having access to intelligence material is fully aware of the special security requirements for this material and maintains records in a manner that permits the contractor to furnish on demand the names of individuals who have access to the material in their custody.

10. Contractor shall restrict access to those individuals with a valid need-to-know who are actually providing services under the contract. Further dissemination to other contractors, subcontractors, or other government agencies and private individuals or organizations is prohibited unless authorized in writing by the CM with prior approval of the Unit IN (AFLCMC/INL)/contracting activity.

Operations Security (OPSEC) DD Form 254 Addendum

OPSEC

All contractors, subcontractors, their employees, associates, and consultants who have access to critical information must comply with the Air Force-sponsored Operations Security (OPSEC) program.

OPSEC is a systematic means of identifying and protecting information which an adversary could use to their advantage or to our disadvantage. Critical Information (CI) is generally unclassified but sensitive information which has been identified by the OPSEC program as requiring protection.

OPSEC Measures (OM) are control standards with which all personnel must comply in order to protect critical information.

Responsibilities:

The AFNWC/NIE must provide / approve OPSEC training curriculum for use by the contractor.

Training must provide listings of critical information that must be protected by all personnel, listings of OPSEC measures which must be used by all personnel to protect critical information, and current foreign intelligence and industrial espionage threats. The contractor must ensure all personnel working on the contract or having access to critical information attend initial and annually recurring refresher training and that the approved curriculum is presented. Training must be provided before personnel are allowed access to critical information. All personnel must comply with OPSEC standards and practices as trained. Additional training may be required based on updates to critical information, OPSEC measures, intelligence threat, or other fundamental changes to the OPSEC program.

The contractor must track OPSEC training statistics to include the personnel working on the contract, when each individual received the required OPSEC training, and when refresher training is due.

Training statistics must be forwarded to AFNWC/NIE at the end of each calendar quarter and upon request.

Prior to seeking approval through Hill AFB Public Affairs, any information to be released outside of official U.S. Government channels, via any media, must be approved through an OPSEC review by AFNWC/NIE. All personnel must promptly report OPSEC related incidents, issues, and concerns to

AFNWC/NIE.

Prime Contract or Solicitation #: TBD

SOLICITATION #: TBD

COORDINATION SHEET FOR HSEP DD FORM 254

Item 13:

THIS DD FORM 254 HAS BEEN REVIEWED AND COORDINATED BY:

X Lt. R. Copeland Stubbs HSEP Program Manager

Enrique Zamora Security Manager

Lori Prendergast COMSEC Manager

Scott Logerquist

AFLCMC/INLS

Steven Nutt 75 ABW Industrial Security Specialist

ZAMORA.ENRIQ

UE.1152994466

Digitally signed by

ZAMORA.ENRIQUE.1152994466

DN: c=US, o=U.S. Government, ou=DoD, ou=PKI, ou=USAF, cn=ZAMORA.ENRIQUE.1152994466 Date: 2015.08.06 15:19:16 -06'00'

STUBBS.RUSSELL.C.III

.1375360361

Digitally signed by STUBBS.RUSSELL.C.III.1375360361 DN: c=US, o=U.S. Government, ou=DoD, ou=PKI, ou=USAF, cn=STUBBS.RUSSELL.C.III.1375360361 Date: 2015.08.07 08:36:15 -06'00'

LOGERQUIST.SCOTT.D.1116539930

DN: c=US, o=U.S. Government, ou=DoD, ou=PKI, ou=USAF, cn=LOGERQUIST.SCOTT.D.11165399 Date: 2015.08.13 10:15:54 -06'00'

PRENDERGAST.LORI.

AMELIA.1205258341

PRENDERGAST.LORI.AMELIA.1205258341

DN: c=US, o=U.S. Government, ou=DoD, ou=PKI, ou=USAF, cn=PRENDERGAST.LORI.AMELIA.1205258341 Date: 2015.08.18 07:37:20 -06'00'

NUTT.STEVEN.

G.1120109525

NUTT.STEVEN.G.1120109525

DN: c=US, o=U.S. Government, ou=DoD, ou=PKI, ou=USAF, cn=NUTT.STEVEN.G.1120109525 Date: 2015.08.19 11:07:31 -06'00'

DEPARTMENT OF DEFENSE

CONTRACT SECURITY CLASSIFICATION SPECIFICATION

(The requirements of the DoD Industrial Security Manual apply to all security aspects of this effort.)

1. CLEARANCE AND SAFEGUARDING

a. FACILITY CLEARANCE REQUIRED

b. LEVEL OF SAFEGUARDING REQUIRED

2. THIS SPECIFICATION IS FOR: (X and complete as applicable)

a. PRIME CONTRACT NUMBER

b. SUBCONTRACT NUMBER

c. SOLICITATION OR OTHER NUMBER DUE DATE (YYYYMMDD)

3. THIS SPECIFICATION IS: (X and complete as applicable)

a. ORIGINAL (Complete date in all cases)

REVISION NO.

c. FINAL (Complete Item 5 in all cases)

DATE (YYYYMMDD)

b. REVISED (Supersedes all previous specs)

4. IS THIS A FOLLOW-ON CONTRACT? YES NO. If Yes, complete the following:

Classified material received or generated under (Preceding Contract Number) is transferred to this follow-on contract.

5. IS THIS A FINAL DD FORM 254? YES NO. If Yes, complete the following:

In response to the contractor's request dated , retention of the classified material is authorized for the period of

6. CONTRACTOR (Include Commercial and Government Entity (CAGE) Code)

a. NAME, ADDRESS, AND ZIP CODE b. CAGE CODE c. COGNIZANT SECURITY OFFICE (Name, Address, and Zip Code)

7. SUBCONTRACTOR

a. NAME, ADDRESS, AND ZIP CODE b. CAGE CODE c. COGNIZANT SECURITY OFFICE (Name, Address, and Zip Code)

8. ACTUAL PERFORMANCE

a. LOCATION b. CAGE CODE c. COGNIZANT SECURITY OFFICE (Name, Address, and Zip Code)

9. GENERAL IDENTIFICATION OF THIS PROCUREMENT

10. CONTRACTOR WILL REQUIRE ACCESS TO: 11. IN PERFORMING THIS CONTRACT, THE CONTRACTOR WILL:YES NO YES NO

a. COMMUNICATIONS SECURITY (COMSEC) INFORMATION

b. RESTRICTED DATA

c. CRITICAL NUCLEAR WEAPON DESIGN INFORMATION

d. FORMERLY RESTRICTED DATA

e. INTELLIGENCE INFORMATION

(1) Sensitive Compartmented Information (SCI)

(2) Non-SCI

f. SPECIAL ACCESS INFORMATION

g. NATO INFORMATION

h. FOREIGN GOVERNMENT INFORMATION

i. LIMITED DISSEMINATION INFORMATION

j. FOR OFFICIAL USE ONLY INFORMATION

k. OTHER (Specify)

a. HAVE ACCESS TO CLASSIFIED INFORMATION ONLY AT ANOTHER

CONTRACTOR'S FACILITY OR A GOVERNMENT ACTIVITY

b. RECEIVE CLASSIFIED DOCUMENTS ONLY

c. RECEIVE AND GENERATE CLASSIFIED MATERIAL

d. FABRICATE, MODIFY, OR STORE CLASSIFIED HARDWARE

e. PERFORM SERVICES ONLY

f. HAVE ACCESS TO U.S. CLASSIFIED INFORMATION OUTSIDE THE U.S., PUERTO RICO, U.S. POSSESSIONS AND TRUST TERRITORIES

g. BE AUTHORIZED TO USE THE SERVICES OF DEFENSE TECHNICAL INFORMATION

CENTER (DTIC) OR OTHER SECONDARY DISTRIBUTION CENTER

h. REQUIRE A COMSEC ACCOUNT

i. HAVE TEMPEST REQUIREMENTS

j. HAVE OPERATIONS SECURITY (OPSEC) REQUIREMENTS

k. BE AUTHORIZED TO USE THE DEFENSE COURIER SERVICE

l. OTHER (Specify)

DD FORM 254, DEC 1999 PREVIOUS EDITION IS OBSOLETE. Adobe Professional 7.0

12. PUBLIC RELEASE. Any information (classified or unclassified) pertaining to this contract shall not be released for public dissemination except as provided by the Industrial Security Manual or unless it has been approved for public release by appropriate U.S. Government authority. Proposed public releases shall be submitted for approval prior to release

a. TYPED NAME OF CERTIFYING OFFICIAL

Direct Through (Specify)

d. ADDRESS (Include Zip Code)

Yes No to the Directorate for Freedom of Information and Security Review, Office of the Assistant Secretary of Defense (Public Affairs)* for review.

*In the case of non-DoD User Agencies, requests for disclosure shall be submitted to that agency.

13. SECURITY GUIDANCE. The security classification guidance needed for this classified effort is identified below. If any difficulty is encountered in applying this guidance or if any other contributing factor indicates a need for changes in this guidance, the contractor is authorized and encouraged to provide recommended changes; to challenge the guidance or the classification assigned to any information or material furnished or generated under this contract; and to submit any questions for interpretation of this guidance to the official identified below. Pending final decision, the information involved shall be handled and protected at the highest level of classification assigned or recommended. (Fill in as appropriate for the classified effort. Attach, or forward under separate correspondence, any documents/guides/extracts referenced herein. Add additional pages as needed to provide complete guidance.)

14. ADDITIONAL SECURITY REQUIREMENTS. Requirements, in addition to ISM requirements, are established for this contract.

(If Yes, identify the pertinent contractual clauses in the contract document itself, or provide an appropriate statement which identifies the additional requirements. Provide a copy of the requirements to the cognizant security office. Use Item 13 if additional space is needed.)

Yes No15. INSPECTIONS. Elements of this contract are outside the inspection responsibility of the cognizant security office.

(If Yes, explain and identify specific areas or elements carved out and the activity responsible for inspections. Use Item 13 if additional space is needed.)

16. CERTIFICATION AND SIGNATURE. Security requirements stated herein are complete and adequate for safeguarding the classified information to be released or generated under this classified effort. All questions shall be referred to the official named below.

b. TITLE c. TELEPHONE (Include Area Code)

e. SIGNATURE

17. REQUIRED DISTRIBUTION

a. CONTRACTOR

b. SUBCONTRACTOR

c. COGNIZANT SECURITY OFFICE FOR PRIME AND SUBCONTRACTOR

d. U.S. ACTIVITY RESPONSIBLE FOR OVERSEAS SECURITY ADMINISTRATION

e. ADMINISTRATIVE CONTRACTING OFFICER

f. OTHERS AS NECESSARY

DD FORM 254 (BACK), DEC 1999

fac_clear: TOP SECRET safe_level: TOP SECRET prime_no:

xprime: Off sub_no:

xsub: Off xsolic: Yes solic_no: FD2020-16-50183 due_date:

xspec3: Orig orig_date: 20150715 rev_no:

rev_date:

final_date:

xfollowon: Yes prec_no:

xfinal: No req_dated:

period:

ctr_name: TBD ctr_cage: TBD ctr_ofc: TBD sub_name: N/A sub_cage: N/A sub_ofc: N/A perf_loc: TBD perf_cage: TBD perf_ofc: TBD gen_id: The Hardness Surveillance Electromagnetic Pulse (HSEP) Program was developed to evaluate the hardness or our launch facilities and missile alert facilities against electromagnetic pulses (EMP) generated during a nuclear event. The HSEP contractor uses special instrumentation and EMP generators to evaluate the response of key systems and protection devices. The program also includes inspection of each site to evaluate hardness degradation due to aging and misconfiguration. A major objective of HSEP is to identify hardness degradation trends with enough lead-time to prevent future problems.

x10a: Yes x10b: Yes x10c: Yes x10d: Yes x10e1: No x10e2: Yes x10f: No x10g: No x10h: No x10i: No x10j: Yes x10k: Yes other10k: See Item #14 x11a: Yes x11b: Yes x11c: Yes x11d: Yes x11e: Yes x11f: Yes x11g: Yes x11h: Yes x11i: Yes x11j: Yes x11k: Yes x11l: Yes other11l: The AFFARS clause 5352.204-9000 applies xrelease: No release_thru: 75 ABW/PA 7285 4th Street

HILL AFB, UT 84056

guidance: See Attached Item 13 xaddlsec: Yes addl_sec: 1. 10.k. Maintain compliance with Personal Reliability Program IAW AFI36-2104; 2. 11.i. See attached Emission Security (EMSEC) addendum to the DD Form 254 for requirements and guidance; 3. 11.j. OPSEC requirements are referenced in the applicable OPSEC DD Form 254 addendum; 4. See attachment for 10.e(2) xinsp: Yes inspections: The Defense Security Services (DSS) is relieved of all industrial security review responsibilities for contractor performance on government installations identified in Items 8.a. The SSAs, identified in Items 8.c have exclusive oversight responsibilities while operating on the Air Force Installations.

cert_name: Brent Michelson cert_title: Contracting Officer cert_phone: 801-777-9494 cert_addr: AFNWC/PZB cert_sign:

x17a: Yes x17b: Off x17c: Yes x17d: Off x17e: Yes x17f: Yes other_dist:

Reset: