SPECIAL_PACKAGING_INSTRUCTIONS_HIT.pdf
PDF 177 KB Posted
- Attached to
- HIGH IMPACT TRANSDUCER - HIT Federal contract opportunity
- Solicitation number
- FA8206-15-R-01015
About this file
SPECIAL PACKAGING INSTRUCTIONS
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| Redacted_J A.pdf | ||
| FA820615R010150004.pdf | ||
| FA820615R010150003.pdf | ||
| Form_260_FEB_10_2016.pdf | ||
| FA820615R010150002.pdf | ||
| CDRL_1423.pdf | ||
| FA820615R010150001.pdf | ||
| Form_260_Jan_13_2016.pdf | ||
| FA8206-15-R-01015.pdf | ||
| FRIST_ARTICLE_HIT.pdf | ||
| PACKAGING_REQUIREMENS_HIT.pdf | ||
| CDRL_HIT_JUNE_24 _2015.pdf | ||
| ITEM_DESCRIPTION.pdf | ||
| SOW_APR_5_2014_HIT.pdf | ||
| ENGINEERING_DATA_LIST_REV_10.pdf | ||
| TRANSPORTATION_DATA.pdf | ||
| FORM_462_ENGINEERING_DATA_ATTACH_A_FIRST_ARTICLE.doc | DOC document | |
| Manufacturing_Source_Qualification_Statement.pdf |
Show all 18
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
CAUTION NOTICES
NOTES
1. ENSURE END CAPS ARE ATTACHED TO CONNECTORS.
2. ENSURE THE HIT PROTECTIVE CAP IS INSTALLED ON THE HIT CABLE ASSEMBLY PRIOR TO PACKAGING.
3. PLACE BARE ITEM IN BOTTOM CUSHION, REF.-3, PLACE TOP CUSHION, REF.-4, OVER ITEM AND PLACE IN INTERIOR
CONTAINER, REF.-2. PLACE IN BARRIER BAG, REF.-5, EVACUATE AIR AND SEAL. PLACE BAGGED CONTAINER IN
EXTERIOR CONTAINER, REF.-1, USE SUFFICIENT AMOUNT OF CUSHIONING, REF.-6, TO FILL VOIDS AND PREVENT
MOVEMENT.
4. ADDITIONAL CUTOUTS ON TOP CUSHION, REF.-4, ARE ACCEPTABLE BUT SHALL NOT BE USED.
INTERNATIONAL STANDARDS FOR PHYTOSANITARY MEASURES
REVISION OF ISPM NO. 15
REVISION OF WOOD PACKAGING MATERIAL FOR INTERNATIONAL TRADE
THE FOLLOWING STATEMENT IS IN COMPLIANCE WITH THE UNITED NATIONS-IMPLEMENTED RESTRICTIONS ON WOOD
PACKAGING MATERIAL (WPM). THIS REQUIREMENT IS SPECIFICALLY CONCERNED WITH INVASIVE SPECIES SUCH AS THE
PINEWOOD NEMATODE. WPM IS DEFINED AS WOOD PALLETS, SKIDS, LOAD BOARDS, PALLET COLLARS, WOODEN BOXES, REELS, DUNNAGE, CRATES, FRAMES, AND CLEATS. THE STATEMENT BELOW CITES THE REQUIREMENTS IN DETAIL AND
COVERS LUMBER FOR BUILDING CONTAINERS AND PALLETS USED FOR DELIVERIES, RESULTING IN SHIPMENTS WORLDWIDE
(DIRECT, OR THROUGH AIR LOGISTICS CENTERS (ALC), CONTAINER CONSOLIDATION POINTS (CCP), OR OTHER BASES).
WOODEN LUMBER, WOODEN PALLET AND PACKAGING/CONTAINER STATEMENT:
ALL WOODEN LUMBER, WOODEN PALLETS, AND WOODEN CONTAINERS PRODUCED ENTIRELY OR IN PART OF WOOD
PACKAGING MATERIAL (WPM) SHALL BE CONSTRUCTED FROM DEBARKED WOOD IN ADDITION TO THE APPLICATION OF
HEAT-TREATED (HT) MATERIAL (HT TO 56 DEGREES CENTIGRADE OR 133 DEGREES FAHRENHEIT FOR 30 MINUTES).
CERTIFICATION/MARKING IS REQUIRED BY AN ACCREDITED AGENCY RECOGNIZED BY THE AMERICAN LUMBER STANDARDS
COMMITTEE (ALSC). FOR REFERENCE DOCUMENTATION, SEE LATEST REVISION OF "INTERNATIONAL STANDARDS FOR
PHYTOSANITARY MEASURES (ISPM NO. 15), "REGULATION OF WOOD PACKAGING MATERIAL IN INTERNATIONAL TRADE."
File details come from the government source that posted it. Updated .