Section_L_ATTACHMENT_7_Labor_Category_Rates_Matrix.xls

XLS spreadsheet 109 KB Posted

Attached to
Professional, Administrative and Management Support Services Federal contract opportunity
Solicitation number
FA8202-08-R-1000
Issued by
Department of the Air Force Materiel Command Lifecycle Management Center Hill Air Force Base

About this file

From the source

TLPS Section L Attachment 7

View the file

Other files for this federal contract opportunity

Other files attached to Professional, Administrative and Management Support Services, newest first.
File Type Posted
FA820208R1000_______0003.RTF RTF text file
FA820209D000X_______0001.RTF RTF text file
Integration_Support_Task_Order.pdf PDF
Notice to Industry 23 Jan 09 - Response to Industry Question.doc DOC document
Industry Comments - Air Force Responses 12 Jan 09.pdf PDF
Industry Comments - Air Force Responses 21 Jan 09.pdf PDF
Industry Comments - Air Force Responses 16 Jan 09.docx DOCX document
Industry Comments - Air Force Responses 12 Jan 09.docx DOCX document
FA820208R1000_______0001.RTF RTF text file
Section_L_ATTACHMENT_3_Questionnaire.doc DOC document
Section_L_ATTACHMENT_2_Quest_Cover_Letter.doc DOC document
Section_L_ATTACHMENT_1_PPIS.docx DOCX document
DD254_TLPS.pdf PDF
FA820208R1000.RTF RTF text file
Section_L_ATTACHMENT_4_Consent_Form.doc DOC document
Section_L_ATTACHMENT_5_Commercial_Client_Authorization.doc DOC document
Notice to Industry 5 Jan 09 - Official RFP release.doc DOC document
Small_Business_Participation_CDRL_A100.pdf PDF
Section_L_ATTACHMENT_7_Labor_Category_Rates_Matrix.xls XLS spreadsheet
Notice to Industry 16 Dec - Discription of Changes Reflected in Draft RFP Posted 16 Dec 08.doc DOC document
TLPS Section M 11 Dec 08 —
TLPS Section L 11 Dec 08 —
K Provision —
Section_L_ATTACHMENT_7_Labor_Category_Rates_Matrix.xls XLS spreadsheet
Section_L_ATTACHMENT_4_Consent_Form.doc DOC document
Section_L_ATTACHMENT_1_PPIS.docx DOCX document
Section_L_ATTACHMENT_5_Commercial_Client_Authorization.doc DOC document
TLPS_PWS.doc DOC document
FA820208R1000.RTF RTF text file
Small_Business_Participation_CDRL_A100.pdf PDF
Section_L_ATTACHMENT_2_Quest_Cover_Letter.doc DOC document
Notice to Industry 20 Nov - Estimated RFP Release.doc DOC document
Notice to Industry 14 Nov - Past Performance Volume.doc DOC document
Notice to Industry 6 Oct - H Clauses.doc DOC document
Draft Task Order Proposal Evaluation Method 23 Sep.doc DOC document
RFI Rates Adjustment Clause 8 Sep.doc DOC document
Alternate Approach Rates Adjustment Clause.doc DOC document
Section_L_ATTACHMENT_2_Quest_Cover_Letter.doc DOC document
Section_L_ATTACHMENT_1_PPIS.doc DOC document
Integration_Support_Task_Order.pdf PDF
Section_L_ATTACHMENT_3_Questionnaire.doc DOC document
DD254_TLPS.pdf PDF
Notice to Industry 28 Aug.doc DOC document
Notice to Industry 18 July.doc DOC document
Section_L_ATTACHMENT_4_Consent_Form.doc DOC document
Response to Industry Questions 18 July.docx DOCX document
DD254_TLPS.pdf PDF
Section_L_ATTACHMENT_2_Quest_Cover_Letter.doc DOC document
Section_L_ATTACHMENT_1_PPIS.doc DOC document
Small_Business_Report-CDRL-A100.xls XLS spreadsheet
Show all 50

Professional, Administrative and Management Support Services has more files on GovTribe.

On GovTribe

Work with this file on GovTribe

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file
Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

Labor Hour Rates

Labor Category Rate Matrix
NTENTENTENTENTENTENTENTENTENTENTENTE
Labor CategoriesLEVELsCY 2009CY 2010CY2011CY 2012CY 2013CY 2014CY 2015CY 2016CY 2017CY 2018CY 2019CY 2020
1Computer SystemsAnalyst, Operations/ResearchN/A
2Computer SystemsComputer Scientist1
3Computer SystemsComputer Scientist2
4Computer SystemsComputer Scientist3
5Computer SystemsComputer Scientist4
6EngineeringScientist1
7EngineeringScientist2
8EngineeringEngineer, Quality Assurance1
9EngineeringEngineer, Reliability and Maintainability1
10EngineeringEngineer, Reliability and Maintainability2
11EngineeringEngineer, Reliability and Maintainability3
12EngineeringEngineer, Reliability and Maintainability4
13EngineeringEngineer, Aerospace1
14EngineeringEngineer, Aerospace2
15EngineeringEngineer, Aerospace3
16EngineeringEngineer, Aerospace4
17EngineeringEngineer, Computer1
18EngineeringEngineer, Computer2
19EngineeringEngineer, Computer3
20EngineeringEngineer, Computer4
21EngineeringEngineer, Electrical1
22EngineeringEngineer, Electrical2
23EngineeringEngineer, Electrical3
24EngineeringEngineer, Electrical4
25EngineeringEngineer, Environmental1
26EngineeringEngineer, Environmental2
27EngineeringEngineer, Environmental3
28EngineeringEngineer, Environmental4
29EngineeringEngineer, Industrial1
30EngineeringEngineer, Industrial2
31EngineeringEngineer, Industrial3
32EngineeringEngineer, Industrial4
33EngineeringEngineer, General1
34EngineeringEngineer, General2
35EngineeringEngineer, General3
36EngineeringEngineer, General4
37EngineeringEngineer, Materials1
38EngineeringEngineer, Materials2
39EngineeringEngineer, Materials3
40EngineeringEngineer, Materials4
41EngineeringEngineer, Mechanical1
42EngineeringEngineer, Mechanical2
43EngineeringEngineer, Mechanical3
44EngineeringEngineer, Mechanical4
45EngineeringEngineer, Manufacturing1
46EngineeringEngineer, Manufacturing2
47EngineeringEngineer, Manufacturing3
48EngineeringEngineer, Manufacturing4
49EngineeringEngineer, Logistics1
50EngineeringEngineer, Logistics2
51EngineeringEngineer, Logistics3
52EngineeringEngineer, Logistics4
53EngineeringEngineer, Software1
54EngineeringEngineer, Software2
55EngineeringEngineer, Software3
56EngineeringEngineer, Software4
57EngineeringEngineer, Specification1
58EngineeringEngineer, Specification2
59EngineeringEngineer, Specification3
60EngineeringEngineer, Specification4
61EngineeringEngineer, System1
62EngineeringEngineer, System2
63EngineeringEngineer, System3
64EngineeringEngineer, System4
65EngineeringEngineer, Test1
66EngineeringEngineer, Test2
67EngineeringEngineer, Test3
68EngineeringEngineer, Test4
69EngineeringEngineer, Test, Non-Destructive1
70EngineeringEngineer, Test, Non-Destructive2
71EngineeringEngineer, Test, Non-Destructive3
72EngineeringEngineer, Test, Non-Destructive4
73EngineeringEngineer, EMSECN/A
74EngineeringEngineer, ElectronicsN/A
75EngineeringEngineer, Human FactorsN/A
76EngineeringEngineer, Mechanical, Ground VehicleN/A
77Miscellaneous CategoriesAdministrative AssistantN/A
78Miscellaneous CategoriesIntegrated Logistics Support (ILS) SpecialistN/A
79Miscellaneous CategoriesLogisticianN/A
80Miscellaneous CategoriesManager, Contract / SubcontractN/A
81Miscellaneous CategoriesManager, FacilityN/A
82Miscellaneous CategoriesManager, FinanceN/A
83Miscellaneous CategoriesManager, ILSN/A
84Miscellaneous CategoriesManager, Program1
85Miscellaneous CategoriesManager, Program2
86Miscellaneous CategoriesQuality Assurance SpecialistN/A
87Miscellaneous CategoriesManager, Design ConfigurationN/A
88Miscellaneous CategoriesOrientation SpecialistN/A
89Miscellaneous CategoriesTelecommunications SpecialistN/A
Not To Exceed Profit FactorN/A
Not To Exceed Fee Factor (R&D)*N/A
Not To Exceed Fee Factor (Other)**N/A
Notes:
The Fixed Labor Hour Rates include applicable overheads and G&A
The Fixed Labor Hour Rates will be used to reimburse the primes contractor for actual hours incurred by him and/or his teaming partners
Teaming partners include all subcontractors which will provide service labor in those labor categories
The Labor Hour Rates and Not To Exceed Profit and Fee Factors are contractually binding
Not To Exceed Fee Factors must be with in the limits identified in FAR 15.404-4; *R&D refers to FAR 15.404-4(c)(4)(A); **Other refers to FAR 15.404-4(c)(4)(C)

Descriptions

Labor AreaLabor CategoryLevelMinimum Education and
ExperienceDescription
Computer SystemsAnalyst, Operations/ResearchN/AMust have a Bachelor’s degree in Operations Research, Mathematics, Computer Science, Cost Accounting or related discipline. A minimum of five (5) years of related work experience is required.Must be able to perform professional and scientific work requiring the design, development and adaptation of mathematical and statistical modeling and scientific methods to analyze operational problems.
Computer SystemsComputer Scientist1Must have a Bachelor of Science or Bachelor of Arts in a computer-related discipline. Must have two (2) years experience in requirement analysis, design, and coding methodologies; database design approaches; documentation standards; configuration management; DOD software policy; and DOD test and evaluation requirements.Performs software engineering and programming for large computers, minicomputer and microprocessor based applications. Develops detailed flow charts and associated documentation from general program statements. Codes segments of a program using Machine Operating Language (MOL) or High Order Language (HOL), employing flow charts and associated prose. Analyzes computer programs and identifies refinements to reduce operating time or otherwise improve performance.
Computer SystemsComputer Scientist2Must have a Bachelor of Science (BS) or Bachelor of Arts (BA) in a computer-related discipline. Must have five (5) years experience in requirements analysis, design, and coding methodologies; documentation standards; configuration management; DOD software policy; and DOD test and evaluation requirements.Performs software engineering and programming for large computers and minicomputer and microprocessor based applications. Performs analyses of system requirements and develops operational software subsystems. Experience in real-time operating systems, distributed systems, timing and sizing analysis, performance analysis, database design and management, and resource utilization assessment is essential. Background in machine and assembly languages, MOLs and HOLs, is required. Background in more than one software development environment is preferred.
Computer SystemsComputer Scientist3Must have a Bachelor of Science or Bachelor of Arts in a computer-related discipline. A Master of Science in Computer Science is preferred. Provides technical direction and guidance to lower level technical personnel as necessary. Must have ten (10) years experience in requirements analysis, design, and coding methodologies; documentation standards; configuration management; DOD software policy; and DOD test and evaluation requirements.Performs software engineering and programming for large computers and minicomputer and microprocessor based applications. Performs analyses of system requirements and develops operational software subsystems. Works with minimal supervision. Provides technical direction and guidance to lower level technical personnel as necessary. Must have experience in real-time operating systems, distributed systems, timing and sizing analysis, performance analysis, data base design and management, and resource utilization assessment is essential. Background in machine and assembly languages, MOLs and HOLs is required, as is background in more than one software development environment.
Computer SystemsComputer Scientist4Must have a Bachelor of Science or Bachelor of Arts in a computer-related discipline. A Master of Science in Computer Science is preferred. Provides technical direction and guidance to lower level technical personnel as necessary. Must have ten (15) years experience in requirements analysis, design, and coding methodologies; documentation standards; configuration management; DOD software policy; and DOD test and evaluation requirements.Performs software engineering and programming for large computers and minicomputer and microprocessor based applications. Performs analyses of system requirements and develops operational software subsystems. Works with minimal supervision. Provides technical direction and guidance to lower level technical personnel as necessary. Must have experience in real-time operating systems, distributed systems, timing and sizing analysis, performance analysis, data base design and management, and resource utilization assessment is essential. Background in machine and assembly languages, MOLs and HOLs is required, as is background in more than one software development environment.
EngineeringScientist1Ph.D. or equivalent in a Technical FieldPerforms highly complex technical studies and analysis efforts. Experience in designing, building and interpreting complex experiments and analyzing the data. Capable of substantially independent research or scholarship under general management supervision. Effectively function in a collaborative, multi-disciplinary team. Experience in project leadership.
EngineeringScientist2Ph.D. or equivalent in a Technical Field
10 years post Ph.D. experiencePerforms highly complex technical studies and analysis efforts. Experience in designing, building and interpreting complex experiments and analyzing the data. Capable of substantially independent research or scholarship under general management supervision. Effectively function in a collaborative, multi-disciplinary team. Experience in project leadership.
EngineeringEngineer, Quality Assurance1Bachelor of Science in Engineering, Mathematics or Physical SciencesMust have engineering experience, including engineering knowledge of probability, reliability, statistical analysis methods, sampling and test and evaluation techniques, data collection and familiarity with applicable regulations and standards. Must have required experience level in the areas of government development and operational testing; other contractor testing to include first article, environmental and performance testing at both component and system levels; preparation, review and analysis of failure reports, verification of corrective actions; requirements validation and their translation and traceability to technical requirements and test specifications; preparation and review of detailed test plans/procedures/reports. Must have detailed, working knowledge of MIL-STD-781, and be familiar with requirements of MIL-STD-810, MIL-STD-781 and MIL-STD-785.
EngineeringEngineer, Reliability and Maintainability1Bachelor of Science degree in Engineering, Mathematics or Physical Sciences

0 - 5 years total experience (BS)

0 - 3 years total experience (MS or PhD)Knowledge of probability, reliability prediction, maintainability analysis, statistical analysis methods, sampling and test and evaluation techniques, data collection and familiarity with applicable regulations and standards. Experience in the areas of development and operational testing to include first article, environmental and performance testing at both component and system levels; preparation, review and analysis of failure reports, verification of corrective actions; requirements validation and their translation and traceability to technical requirements and test specifications; preparation and review of detailed test plans/procedures/reports.
EngineeringEngineer, Reliability and Maintainability2BS in Engineering, Mathematics or Physical Sciences (MS or PhD. Preferred)

5 years total experience (BS)

3 years total experience (MS or PhD)Knowledge of probability, reliability prediction, maintainability analysis, statistical analysis methods, sampling and test and evaluation techniques, data collection and familiarity with applicable regulations and standards. Experience in the areas of development and operational testing to include first article, environmental and performance testing at both component and system levels; preparation, review and analysis of failure reports, verification of corrective actions; requirements validation and their translation and traceability to technical requirements and test specifications; preparation and review of detailed test plans/procedures/reports.
EngineeringEngineer, Reliability and Maintainability3BS in Engineering, Mathematics or Physical Sciences (MS or PhD. Preferred)

12 years total experience (BS) 10 years total experience (MS)

8 years total experience (PhD)Knowledge of probability, reliability prediction, maintainability analysis, statistical analysis methods, sampling and test and evaluation techniques, data collection and familiarity with applicable regulations and standards. Experience in the areas of development and operational testing to include first article, environmental and performance testing at both component and system levels; preparation, review and analysis of failure reports, verification of corrective actions; requirements validation and their translation and traceability to technical requirements and test specifications; preparation and review of detailed test plans/procedures/reports.
EngineeringEngineer, Reliability and Maintainability4BS in Engineering, Mathematics or Physical Sciences (MS or PhD. Preferred)

20 years total experience (BS) 18 years total experience (MS)

16 years total experience (PhD)Knowledge of probability, reliability prediction, maintainability analysis, statistical analysis methods, sampling and test and evaluation techniques, data collection and familiarity with applicable regulations and standards. Experience in the areas of development and operational testing to include first article, environmental and performance testing at both component and system levels; preparation, review and analysis of failure reports, verification of corrective actions; requirements validation and their translation and traceability to technical requirements and test specifications; preparation and review of detailed test plans/procedures/reports.
EngineeringEngineer, Aerospace1Bachelor of Science degree in Aerospace, Mechanical Engineering, or Civil Engineering

OR

Physical/Mathematics degree with an Engineer-in-Training Certificate (EIT)

0 - 5 years total experience (BS)

0 - 3 years total experience (MS or PhD)Progressive experience in design and development of aerospace engineering projects required. Must have experience and skills necessary to perform the following tasks: a) provide highly technical expertise and guidance in solving complex engineering problems; b) perform in all phases of hardware development, integration / implementation and analysis; c) participate in hardware evaluations; d) analyze aircraft structure and/or mechanical systems e) develop standards and guidelines for tasks being performed; and, f) interface with government personnel.
EngineeringEngineer, Aerospace2Bachelor of Science degree in Aerospace, Mechanical Engineering, or Civil Engineering

OR

Physical/Mathematics degree with an Engineer-in-Training Certificate (EIT)

5 years total experience (BS)

3 years total experience (MS or PhD)Progressive experience in design and development of aerospace engineering projects required. Must have experience and skills necessary to perform the following tasks: a) provide highly technical expertise and guidance in solving complex engineering problems; b) perform in all phases of hardware development, integration / implementation and analysis; c) participate in hardware evaluations; d) analyze aircraft structure and/or mechanical systems e) develop standards and guidelines for tasks being performed; and, f) interface with government personnel.
EngineeringEngineer, Aerospace3Bachelor of Science degree in Aerospace, Mechanical Engineering, or Civil Engineering

OR

Physical/Mathematics degree with an Engineer-in-Training Certificate (EIT)

12 years total experience (BS) 10 years total experience (MS) 8 years total experience (PhD)

AND

3 years technical leadershipProgressive experience in design and development of aerospace engineering projects required. Must have experience and skills necessary to perform the following tasks: a) provide highly technical expertise and guidance in solving complex engineering problems; b) perform in all phases of hardware development, integration / implementation and analysis; c) participate in hardware evaluations; d) analyze aircraft structure and/or mechanical systems e) develop standards and guidelines for tasks being performed; and, f) interface with government personnel.
EngineeringEngineer, Aerospace4Bachelor of Science degree in Aerospace, Mechanical Engineering, or Civil Engineering

OR

Physical/Mathematics degree with an Engineer-in-Training Certificate (EIT)

20 years total experience (BS) 18 years total experience (MS) 16 years total experience (PhD)

AND

10 years technical leadershipProgressive experience in design and development of aerospace engineering projects required. Must have experience and skills necessary to perform the following tasks: a) provide highly technical expertise and guidance in solving complex engineering problems; b) perform in all phases of hardware development, integration / implementation and analysis; c) participate in hardware evaluations; d) analyze aircraft structure and/or mechanical systems e) develop standards and guidelines for tasks being performed; and, f) interface with government personnel.
EngineeringEngineer, Computer1Bachelor of Science degree in Engineering or Computer Science

0 - 5 years total experience (BS)

0 - 3 years total experience (MS or PhD)Must be thoroughly familiar with UNIX and Windows-based operating systems and be capable of performing system administration and network administration functions to include management of software and hardware maintenance; utilizing contractor services as applicable; backup procedures; problem troubleshooting; user support; system security and other normal administration requirements. Background in CAD and graphics applications is desired and familiarity with networked workstations, servers, storage, printing and plotting devices.
EngineeringEngineer, Computer2Bachelor of Science (Master of Science or Doctorate {Ph.D.} preferred) degree in engineering OR mathematics/physical science degree with an EIT Certificate

5 years total experience (BS)

3 years total experience (MS or PhD)Must be thoroughly familiar with UNIX and Windows-based operating systems and be capable of performing system administration and network administration functions to include management of software and hardware maintenance; utilizing contractor services as applicable; backup procedures; problem troubleshooting; user support; system security and other normal administration requirements. Background in CAD and graphics applications is desired and familiarity with networked workstations, servers, storage, printing and plotting devices.
EngineeringEngineer, Computer3Bachelor of Science (Master of Science or Doctorate {Ph.D.} preferred) degree in engineering OR mathematics/physical science degree with an EIT Certificate

12 years total experience (BS) 10 years total experience (MS)

8 years total experience (PhD)Must be thoroughly familiar with UNIX and Windows-based operating systems and be capable of performing system administration and network administration functions to include management of software and hardware maintenance; utilizing contractor services as applicable; backup procedures; problem troubleshooting; user support; system security and other normal administration requirements. Background in CAD and graphics applications is desired and familiarity with networked workstations, servers, storage, printing and plotting devices.
EngineeringEngineer, Computer4Bachelor of Science (Master of Science or Doctorate {Ph.D.} preferred) degree in engineering OR mathematics/physical science degree with an EIT Certificate

20 years total experience (BS) 18 years total experience (MS)

16 years total experience (PhD)Must be thoroughly familiar with UNIX and Windows-based operating systems and be capable of performing system administration and network administration functions to include management of software and hardware maintenance; utilizing contractor services as applicable; backup procedures; problem troubleshooting; user support; system security and other normal administration requirements. Background in CAD and graphics applications is desired and familiarity with networked workstations, servers, storage, printing and plotting devices.
EngineeringEngineer, Electrical1Bachelor of Science in Electrical/Electronic Engineering

OR

Mathematics/Physical Science Degree with an EIT Certificate

0 - 5 years total experience (BS)

0 - 3 years total experience (MS or PhD)Must have progressive experience in complex military electronics microprocessor-based systems, real-time networks, computer graphics, and analog and digital electronics; experience shall include design, development, and integration of complex military electronics; plus experience in supervising design and development of hardware projects. Must have experience and skills necessary to perform the following tasks: 1) provide highly technical expertise and guidance in solving complex engineering problems; 2) perform in all phases of hardware development, integration/implementation, troubleshooting, risk and safety evaluations, and analysis; 3) participate in hardware evaluations; 4) develop standards and guidelines for tasks being performed; and, 5) interface with government personnel.
EngineeringEngineer, Electrical2Bachelor of Science in Electrical/Electronic Engineering

OR

Mathematics/Physical Science Degree with an EIT Certificate

5 years total experience (BS)

3 years total experience (MS or PhD)Must have progressive experience in complex military electronics microprocessor-based systems, real-time networks, computer graphics, and analog and digital electronics; experience shall include design, development, and integration of complex military electronics; plus experience in supervising design and development of hardware projects. Must have experience and skills necessary to perform the following tasks: 1) provide highly technical expertise and guidance in solving complex engineering problems; 2) perform in all phases of hardware development, integration/implementation, troubleshooting, risk and safety evaluations, and analysis; 3) participate in hardware evaluations; 4) develop standards and guidelines for tasks being performed; and, 5) interface with government personnel.
EngineeringEngineer, Electrical3Bachelor of Science in Electrical/Electronic Engineering

OR

Mathematics/Physical Science Degree with an EIT Certificate

12 years total experience (BS) 10 years total experience (MS)

8 years total experience (PhD)Must have progressive experience in complex military electronics microprocessor-based systems, real-time networks, computer graphics, and analog and digital electronics; experience shall include design, development, and integration of complex military electronics; plus experience in supervising design and development of hardware projects. Must have experience and skills necessary to perform the following tasks: 1) provide highly technical expertise and guidance in solving complex engineering problems; 2) perform in all phases of hardware development, integration/implementation, troubleshooting, risk and safety evaluations, and analysis; 3) participate in hardware evaluations; 4) develop standards and guidelines for tasks being performed; and, 5) interface with government personnel.
EngineeringEngineer, Electrical4Bachelor of Science in Electrical/Electronic Engineering

OR

Mathematics/Physical Science Degree with an EIT Certificate

20 years total experience (BS) 18 years total experience (MS)

16 years total experience (PhD)Must have progressive experience in complex military electronics microprocessor-based systems, real-time networks, computer graphics, and analog and digital electronics; experience shall include design, development, and integration of complex military electronics; plus experience in supervising design and development of hardware projects. Must have experience and skills necessary to perform the following tasks: 1) provide highly technical expertise and guidance in solving complex engineering problems; 2) perform in all phases of hardware development, integration/implementation, troubleshooting, risk and safety evaluations, and analysis; 3) participate in hardware evaluations; 4) develop standards and guidelines for tasks being performed; and, 5) interface with government personnel.
EngineeringEngineer, Environmental1Bachelors in Environmental Sciences, Chemistry or Related Field

0 - 5 years total experience (BS)

0 - 3 years total experience (MS or PhD)Must have progressive experience in development and management of environmental compliance programs, environmental monitoring and remediation, pollution prevention programs, environmental restoration, and hazardous and non-hazardous materials. Knowledge of and experience with federal, state, and local environmental regulations. Must have experience in personal protection and safety; government/commercial practices for handling, storage, disposal, and recycling of hazardous materials.
EngineeringEngineer, Environmental2Bachelors in Environmental Sciences, Chemistry or Related Field

5 years total experience (BS)

3 years total experience (MS or PhD)Must have progressive experience in development and management of environmental compliance programs, environmental monitoring and remediation, pollution prevention programs, environmental restoration, and hazardous and non-hazardous materials. Knowledge of and experience with federal, state, and local environmental regulations. Must have experience in personal protection and safety; government/commercial practices for handling, storage, disposal, and recycling of hazardous materials.
EngineeringEngineer, Environmental3Bachelors in Environmental Sciences, Chemistry or Related Field

12 years total experience (BS) 10 years total experience (MS)

8 years total experience (PhD)Must have progressive experience in development and management of environmental compliance programs, environmental monitoring and remediation, pollution prevention programs, environmental restoration, and hazardous and non-hazardous materials. Knowledge of and experience with federal, state, and local environmental regulations. Must have experience in personal protection and safety; government/commercial practices for handling, storage, disposal, and recycling of hazardous materials.
EngineeringEngineer, Environmental4Bachelors in Environmental Sciences, Chemistry or Related Field

20 years total experience (BS) 18 years total experience (MS)

16 years total experience (PhD)Must have progressive experience in development and management of environmental compliance programs, environmental monitoring and remediation, pollution prevention programs, environmental restoration, and hazardous and non-hazardous materials. Knowledge of and experience with federal, state, and local environmental regulations. Must have experience in personal protection and safety; government/commercial practices for handling, storage, disposal, and recycling of hazardous materials.
EngineeringEngineer, Industrial1Bachelor of Science in Industrial Engineering

OR

mathematics/physical science degree with an EIT Certificate

0 - 5 years total experience (BS)

0 - 3 years total experience (MS or PhD)Must have progressive experience in development, improvement, and integration of industrial processes. Must have experience and skills necessary to perform the following: 1) provide technical expertise and guidance in solving complex engineering and information management problems through software assisted process modeling; 2) perform in all phases of process development, integration, implementation, modeling, and analysis; 3) evaluate software/hardware/information systems integration; 4) develop standards and guidelines for tasks being performed; 5) ensure compliance with all applicable safety standards; and 6) interface with government personnel.
EngineeringEngineer, Industrial2Bachelor of Science in Industrial Engineering

OR

mathematics/physical science degree with an EIT Certificate

5 years total experience (BS)

3 years total experience (MS or PhD)Must have progressive experience in development, improvement, and integration of industrial processes. Must have experience and skills necessary to perform the following: 1) provide technical expertise and guidance in solving complex engineering and information management problems through software assisted process modeling; 2) perform in all phases of process development, integration, implementation, modeling, and analysis; 3) evaluate software/hardware/information systems integration; 4) develop standards and guidelines for tasks being performed; 5) ensure compliance with all applicable safety standards; and 6) interface with government personnel.
EngineeringEngineer, Industrial3Bachelor of Science in Industrial Engineering

OR

mathematics/physical science degree with an EIT Certificate

12 years total experience (BS) 10 years total experience (MS)

8 years total experience (PhD)Must have progressive experience in development, improvement, and integration of industrial processes. Must have experience and skills necessary to perform the following: 1) provide technical expertise and guidance in solving complex engineering and information management problems through software assisted process modeling; 2) perform in all phases of process development, integration, implementation, modeling, and analysis; 3) evaluate software/hardware/information systems integration; 4) develop standards and guidelines for tasks being performed; 5) ensure compliance with all applicable safety standards; and 6) interface with government personnel.
EngineeringEngineer, Industrial4Bachelor of Science in Industrial Engineering

OR

mathematics/physical science degree with an EIT Certificate

20 years total experience (BS) 18 years total experience (MS)

16 years total experience (PhD)Must have progressive experience in development, improvement, and integration of industrial processes. Must have experience and skills necessary to perform the following: 1) provide technical expertise and guidance in solving complex engineering and information management problems through software assisted process modeling; 2) perform in all phases of process development, integration, implementation, modeling, and analysis; 3) evaluate software/hardware/information systems integration; 4) develop standards and guidelines for tasks being performed; 5) ensure compliance with all applicable safety standards; and 6) interface with government personnel.
EngineeringEngineer, General1Bachelor of Science in Engineering

OR

Mathematics/Physical Science Degree with an EIT Certificate

0 - 5 years total experience (BS)

0 - 3 years total experience (MS or PhD)Must have progressive experience in engineering management of military systems/sub-systems. Proven expertise is required in technology transfer, technology insertion, information systems, system upgrade/replacement, and application of emerging technologies. Must have extensive knowledge of military specifications and standards pertaining to military systems and sub-systems. Must have the capability to manage and integrate complicated sub-systems into higher level systems. Specialized experience is required to demonstrate understanding of engineering project development from inception to deployment and sustainment. Responsible for technical aspects of each project or program. Serves as technical point of contact with client on program activities. Ensures required resources including manpower, production standards, computer time and facilities are available for program implementation.
EngineeringEngineer, General2Bachelor of Science in Engineering

OR

Mathematics/Physical Science Degree with an EIT Certificate

5 years total experience (BS)

3 years total experience (MS or PhD)Must have progressive experience in engineering management of military systems/sub-systems. Proven expertise is required in technology transfer, technology insertion, information systems, system upgrade/replacement, and application of emerging technologies. Must have extensive knowledge of military specifications and standards pertaining to military systems and sub-systems. Must have the capability to manage and integrate complicated sub-systems into higher level systems. Specialized experience is required to demonstrate understanding of engineering project development from inception to deployment and sustainment. Responsible for technical aspects of each project or program. Serves as technical point of contact with client on program activities. Ensures required resources including manpower, production standards, computer time and facilities are available for program implementation.
EngineeringEngineer, General3Bachelor of Science in Engineering

OR

Mathematics/Physical Science Degree with an EIT Certificate

12 years total experience (BS) 10 years total experience (MS)

8 years total experience (PhD)Must have progressive experience in engineering management of military systems/sub-systems. Proven expertise is required in technology transfer, technology insertion, information systems, system upgrade/replacement, and application of emerging technologies. Must have extensive knowledge of military specifications and standards pertaining to military systems and sub-systems. Must have the capability to manage and integrate complicated sub-systems into higher level systems. Specialized experience is required to demonstrate understanding of engineering project development from inception to deployment and sustainment. Responsible for technical aspects of each project or program. Serves as technical point of contact with client on program activities. Ensures required resources including manpower, production standards, computer time and facilities are available for program implementation.
EngineeringEngineer, General4Bachelor of Science in Engineering

OR

Mathematics/Physical Science Degree with an EIT Certificate

20 years total experience (BS) 18 years total experience (MS)

16 years total experience (PhD)Must have progressive experience in engineering management of military systems/sub-systems. Proven expertise is required in technology transfer, technology insertion, information systems, system upgrade/replacement, and application of emerging technologies. Must have extensive knowledge of military specifications and standards pertaining to military systems and sub-systems. Must have the capability to manage and integrate complicated sub-systems into higher level systems. Specialized experience is required to demonstrate understanding of engineering project development from inception to deployment and sustainment. Responsible for technical aspects of each project or program. Serves as technical point of contact with client on program activities. Ensures required resources including manpower, production standards, computer time and facilities are available for program implementation.
EngineeringEngineer, Materials1Bachelor of Science in Materials Science/Mechanical Engineering

OR

Mathematics/Physical Science Degree with an EIT Certificate

0 - 5 years total experience (BS)

0 - 3 years total experience (MS or PhD)Must have progressive experience in the design and use of aerospace materials including metal alloys, composites and polymer materials (fiberglass, aluminum honeycomb, plastics, elastomers, resins, etc.) with the skills necessary to perform the following tasks: 1) provide technical expertise and guidance in solving complex engineering problems; 2) plan, organize, and conduct tests to determine material composition, reaction of materials to different chemicals, and performance of materials under various operational conditions, including corrosion control and prevention, as required; 3) develop nondestructive inspections (NDI) from the classic methods to innovative new methods/technologies; 4) perform in all phases of material development, integration/implementation, and analysis; 5) develop standards and guidelines for tasks being performed; and, 6) interface with government personnel.
EngineeringEngineer, Materials2Bachelor of Science in Materials Science/Mechanical Engineering

OR

Mathematics/Physical Science Degree with an EIT Certificate

5 years total experience (BS)

3 years total experience (MS or PhD)Must have progressive experience in the design and use of aerospace materials including metal alloys, composites and polymer materials (fiberglass, aluminum honeycomb, plastics, elastomers, resins, etc.) with the skills necessary to perform the following tasks: 1) provide technical expertise and guidance in solving complex engineering problems; 2) plan, organize, and conduct tests to determine material composition, reaction of materials to different chemicals, and performance of materials under various operational conditions, including corrosion control and prevention, as required; 3) develop nondestructive inspections (NDI) from the classic methods to innovative new methods/technologies; 4) perform in all phases of material development, integration/implementation, and analysis; 5) develop standards and guidelines for tasks being performed; and, 6) interface with government personnel.
EngineeringEngineer, Materials3Bachelor of Science in Materials Science/Mechanical Engineering

OR

Mathematics/Physical Science Degree with an EIT Certificate

12 years total experience (BS) 10 years total experience (MS)

8 years total experience (PhD)Must have progressive experience in the design and use of aerospace materials including metal alloys, composites and polymer materials (fiberglass, aluminum honeycomb, plastics, elastomers, resins, etc.) with the skills necessary to perform the following tasks: 1) provide technical expertise and guidance in solving complex engineering problems; 2) plan, organize, and conduct tests to determine material composition, reaction of materials to different chemicals, and performance of materials under various operational conditions, including corrosion control and prevention, as required; 3) develop nondestructive inspections (NDI) from the classic methods to innovative new methods/technologies; 4) perform in all phases of material development, integration/implementation, and analysis; 5) develop standards and guidelines for tasks being performed; and, 6) interface with government personnel.
EngineeringEngineer, Materials4Bachelor of Science in Materials Science/Mechanical Engineering

OR

Mathematics/Physical Science Degree with an EIT Certificate

20 years total experience (BS) 18 years total experience (MS)

16 years total experience (PhD)Must have progressive experience in the design and use of aerospace materials including metal alloys, composites and polymer materials (fiberglass, aluminum honeycomb, plastics, elastomers, resins, etc.) with the skills necessary to perform the following tasks: 1) provide technical expertise and guidance in solving complex engineering problems; 2) plan, organize, and conduct tests to determine material composition, reaction of materials to different chemicals, and performance of materials under various operational conditions, including corrosion control and prevention, as required; 3) develop nondestructive inspections (NDI) from the classic methods to innovative new methods/technologies; 4) perform in all phases of material development, integration/implementation, and analysis; 5) develop standards and guidelines for tasks being performed; and, 6) interface with government personnel.
EngineeringEngineer, Mechanical1Bachelor of Science in Mechanical Engineering

OR

Mathematics/Physical Science Degree with an EIT Certificate

0 - 5 years total experience (BS)

0 - 3 years total experience (MS or PhD)Must have progressive experience in the design, development, and integration of aircraft hydraulic/pneumatic/mechanical systems, with two years of supervising design and development of engineering projects. Must have experience and skills necessary to perform the following tasks: 1) provide highly technical expertise and guidance in solving complex engineering problems; 2) perform in all phases of hardware design, development, integration/implementation, and analysis; 3) plan and conduct engineering feasibility studies for the design improvement modifications and implementation of advanced technologies; 4) develop standards and guidelines for tasks being performed; and, 5) interface with government personnel.
EngineeringEngineer, Mechanical2Bachelor of Science in Mechanical Engineering

OR

Mathematics/Physical Science Degree with an EIT Certificate

5 years total experience (BS)

3 years total experience (MS or PhD)Must have progressive experience in the design, development, and integration of aircraft hydraulic/pneumatic/mechanical systems, with two years of supervising design and development of engineering projects. Must have experience and skills necessary to perform the following tasks: 1) provide highly technical expertise and guidance in solving complex engineering problems; 2) perform in all phases of hardware design, development, integration/implementation, and analysis; 3) plan and conduct engineering feasibility studies for the design improvement modifications and implementation of advanced technologies; 4) develop standards and guidelines for tasks being performed; and, 5) interface with government personnel.
EngineeringEngineer, Mechanical3Bachelor of Science in Mechanical Engineering

OR

Mathematics/Physical Science Degree with an EIT Certificate

12 years total experience (BS) 10 years total experience (MS)

8 years total experience (PhD)Must have progressive experience in the design, development, and integration of aircraft hydraulic/pneumatic/mechanical systems, with two years of supervising design and development of engineering projects. Must have experience and skills necessary to perform the following tasks: 1) provide highly technical expertise and guidance in solving complex engineering problems; 2) perform in all phases of hardware design, development, integration/implementation, and analysis; 3) plan and conduct engineering feasibility studies for the design improvement modifications and implementation of advanced technologies; 4) develop standards and guidelines for tasks being performed; and, 5) interface with government personnel.
EngineeringEngineer, Mechanical4Bachelor of Science in Mechanical Engineering

OR

Mathematics/Physical Science Degree with an EIT Certificate

20 years total experience (BS) 18 years total experience (MS)

16 years total experience (PhD)Must have progressive experience in the design, development, and integration of aircraft hydraulic/pneumatic/mechanical systems, with two years of supervising design and development of engineering projects. Must have experience and skills necessary to perform the following tasks: 1) provide highly technical expertise and guidance in solving complex engineering problems; 2) perform in all phases of hardware design, development, integration/implementation, and analysis; 3) plan and conduct engineering feasibility studies for the design improvement modifications and implementation of advanced technologies; 4) develop standards and guidelines for tasks being performed; and, 5) interface with government personnel.
EngineeringEngineer, Manufacturing1Bachelor of Science in Mechanical, Industrial, and/or Electrical Engineering

0 - 5 years total experience (BS)

0 - 3 years total experience (MS or PhD)Must have progressive experience in an industrial/manufacturing environment. Experience should include the full range of manufacturing tasks including planning, understanding of military specifications and certifications, raw material selection and evaluation, engineering change process, design modification, use of CAD, CAM and MRP systems, tooling, manufacturing process development, and lifecycle support considerations. Must have the skills to; 1) work closely with program management and design engineers in a concurrent engineering environment; 2) contribute manufacturing considerations to design, raw material selection and lead times in advance of entering the manufacturing phase; 3) sign off on completed drawings; 4) evaluate Engineering Change Proposals (ECP) with manufacturing efficiencies in mind; 5) participate in major reviews; and 6) interface with government personnel.
EngineeringEngineer, Manufacturing2Bachelor of Science in Mechanical, Industrial, and/or Electrical Engineering

5 years total experience (BS)

3 years total experience (MS or PhD)Must have progressive experience in an industrial/manufacturing environment. Experience should include the full range of manufacturing tasks including planning, understanding of military specifications and certifications, raw material selection and evaluation, engineering change process, design modification, use of CAD, CAM and MRP systems, tooling, manufacturing process development, and lifecycle support considerations. Must have the skills to; 1) work closely with program management and design engineers in a concurrent engineering environment; 2) contribute manufacturing considerations to design, raw material selection and lead times in advance of entering the manufacturing phase; 3) sign off on completed drawings; 4) evaluate Engineering Change Proposals (ECP) with manufacturing efficiencies in mind; 5) participate in major reviews; and 6) interface with government personnel.
EngineeringEngineer, Manufacturing3Bachelor of Science in Mechanical, Industrial, and/or Electrical Engineering

12 years total experience (BS) 10 years total experience (MS)

8 years total experience (PhD)Must have progressive experience in an industrial/manufacturing environment. Experience should include the full range of manufacturing tasks including planning, understanding of military specifications and certifications, raw material selection and evaluation, engineering change process, design modification, use of CAD, CAM and MRP systems, tooling, manufacturing process development, and lifecycle support considerations. Must have the skills to; 1) work closely with program management and design engineers in a concurrent engineering environment; 2) contribute manufacturing considerations to design, raw material selection and lead times in advance of entering the manufacturing phase; 3) sign off on completed drawings; 4) evaluate Engineering Change Proposals (ECP) with manufacturing efficiencies in mind; 5) participate in major reviews; and 6) interface with government personnel.
EngineeringEngineer, Manufacturing4Bachelor of Science in Mechanical, Industrial, and/or Electrical Engineering

20 years total experience (BS) 18 years total experience (MS)

16 years total experience (PhD)Must have progressive experience in an industrial/manufacturing environment. Experience should include the full range of manufacturing tasks including planning, understanding of military specifications and certifications, raw material selection and evaluation, engineering change process, design modification, use of CAD, CAM and MRP systems, tooling, manufacturing process development, and lifecycle support considerations. Must have the skills to; 1) work closely with program management and design engineers in a concurrent engineering environment; 2) contribute manufacturing considerations to design, raw material selection and lead times in advance of entering the manufacturing phase; 3) sign off on completed drawings; 4) evaluate Engineering Change Proposals (ECP) with manufacturing efficiencies in mind; 5) participate in major reviews; and 6) interface with government personnel.
EngineeringEngineer, Logistics1Bachelor of Computer Science, Information Systems, Engineering, Business, Logistics or related scientific or technical discipline

0 - 5 years total experience (BS)

This is the start of the file's text. The full file is on GovTribe.

File details come from the government source that posted it. Updated .