Camera Maintenance SOW_Final.pdf

PDF 250 KB Posted Jan 17, 2020

Attached to: SFS CCTV CAMERA MAINTENANCE Federal contract opportunity
Solicitation number: FA820120Q0002
Issued by: Department of the Air Force Materiel Command Air Force Sustainment Center

About this file

Written by GovTribe AI · Dec 27, 2023

This statement of work outlines the requirements for a closed circuit television camera maintenance contract to be awarded by the Department of the Air Force Materiel Command Air Force Sustainment Center. The contractor shall provide all necessary personnel, equipment, supplies, facilities, transportation, tools, materials, supervision, and other non-personal services to perform bi-yearly preventative maintenance inspections and restore unscheduled outages of CCTV cameras and associated equipment located across Hill Air Force Base in Utah and the Utah Test and Training Range. Key requirements include inspecting, testing, cleaning and servicing over 300 cameras and equipment; notifying the government of needed repairs or replacements; providing a centralized contact for reporting issues and responding on-site within one day for repairs; and accomplishing all work in accordance with Air Force and industry standards.

View the file

Other files for this federal contract opportunity

Other files attached to SFS CCTV CAMERA MAINTENANCE, newest first.
File	Type	Posted
Contractor question Gov responses.pdf	PDF	Feb 20, 2020
Camera Maintenance SOW_Final 18 Feb 2020.pdf	PDF	Feb 20, 2020
Solicitation Amendment - FA820120Q00020003.pdf	PDF	Feb 20, 2020
Solicitation Amendment - FA820120Q00020001.pdf	PDF	Jan 17, 2020
Solicitation - FA820120Q0002.pdf	PDF	Jan 17, 2020
SBA.pdf	PDF	Jan 17, 2020

On GovTribe

Work with this file on GovTribe

Download the original file
Contacts named in this file
Similar government files
Ask GovTribe AI about this file

Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

STATEMENT OF WORK (SOW)

For

Installation Closed Circuit Television (CCTV) Camera Maintenance Located on:

Hill AFB, Utah

1. GENERAL: This is a non-personal services, to be on a firm-fixed price contract, to provide bi- yearly Preventive Maintenance Inspection (PMI) of Hill AFB cameras system to include all other associated equipment such as digital recording devices, camera housing units and cabling. The contractor will also be responsible for service responses for unscheduled camera and associated equipment outages as outlined in this SOW. The government shall not exercise any supervision or control over the contract service providers performing the services herein. Such contract service providers shall be accountable solely to the Contractor who, in turn is responsible to the Government. This contract will be funded for a base year and four option years.

1.1 Description of Services/Introduction: The contractor shall provide all personnel, equipment, supplies, facilities, transportation, tools, materials, supervision, and other items and non-personal services necessary to perform quarterly PMI as defined in this SOW except for those items specified as government furnished property and services (see attached List of Equipment). The contractor shall perform to the standards in this Statement of Work.

1.2 Background: The Base Camera System is an enhanced security measure. The cameras provide monitoring of all customers entering and exiting gates and facilities on Hill AFB. The cameras also assist the Emergency Communications Center (ECC) in monitoring gates and facilities during and after normal duty hours.

1.3 Objectives: Inspect, test, clean and service all CCTV cameras and associated equipment. PMI work shall be accomplished in accordance with (IAW) manufacturer and maintenance manuals specifications for that specific equipment. Restore unscheduled service outages with the timelines outlined in this Statement of Work (SOW).

All the required work will be accomplished in accordance with United States Air Force regulations and industry standards.

1.4 Scope: This SOW provides information for a contractor to provide the necessary trained and fully qualified personnel, supervision, task management, hardware, materials, tools, and technical services required for the successful accomplishment of the requirements and tasks set forth herein. Contractor shall be responsible for providing personnel with the necessary expertise to complete the assigned tasks satisfactorily. Personnel shall be capable of working independently and with demonstrated working knowledge of the equipment required by this SOW. Tasks include:

1) Notify COR if cameras need to be repaired or replaced. The contractor will not be reimbursed in the event they purchase replacement parts or cameras. If the contractor procures replacement parts or cameras, and install them on the base, it then becomes government property.

2) Inspect, test, clean, and service the head-end video equipment, cabling, and fiber optic transceivers.

3) Inspect all monitors to ensure clarity, eliminate blooming, and minimize Radio Frequency (RF) interference and reduce the risk of burn-in by bright lights by repositioning stationary (staring) cameras.

4) Inspect and test all video matrix switches and digital video recorder functions, upgrade software as required, and replace defective components as necessary, IAW DoD approved equipment and software list.

5) Clean all fiber optic connections at transceiver location and all intermediate patch panels with appropriate cleaning materials as stated by manufacture and reconnect.

NOTE: This step is only required if the end-to-end fiber optic testing indicates there is a problem.

6) Perform an end-to-end power test of each camera location.

7) Inspect all power cables, fuses, circuit breakers, and lightning protection devices at each camera location.

8) Inspect the camera mounts at each location, repair, or replace as needed.

9) Inspect the lightning protection and grounding, repair as necessary.

10) Perform a complete system check upon completion of PMI Camera Assemblies.

11) Disassemble, visually inspect for cracks and corrosion, clean and repair all camera and housing assemblies.

12) Clean all contacts and connectors on the inside of the camera housings.

13) Test and repair interior heaters.

14) Replace desiccant packages within the camera housings.

15) Replace humidity detectors within camera housings.

16) Reassemble and weatherproof camera housings.

17) Recharge housings with Nitrogen after reassembly.

18) Repair and/or replace all broken/failing cameras.

1.4.1 Scheduled Maintenance and Repair:

The PMI shall be completed bi-yearly during the months of May and October. The contractor will notify and obtain approval from the on-site Contracting Officer Representative (COR) or designated representative in advance of scheduled PMI.

1.4.2 Service Calls:

All Camera systems will be operational 24-hours-per-day, 7-days-per-week. The contractor shall provide a centralized call-in number and e-mail address for reporting outages or service issues. It is not necessary that the centralized call-in number be manned 24/7, only that the contractor telephonically respond within one (24) hour from the placement of the outage service call to begin troubleshooting of the issue. When telephone trouble-shooting is unable to resolve the problem, the Contractor will dispatch a service technician to the site within one (1) day of the service call to begin repair of the system. The service technician must arrive on-site within the next business day to begin servicing/repairing of the system. Upon arrival at the site/location the Contractor is required to report in with the Contracting Officer’s Representative (COR). Only the services specified by this agreement are authorized, the Contractor is cautioned that ONLY the Contracting Officer (CO) may authorize additional services and that any authorized services provided by the Contractor without proper authorization from the CO is done at Contractor’s risk and may not be reimbursed. The COR must be briefed on any work that needs to be accomplished and provided with a written work order documenting all work performed or services provided. All service calls shall be responded to without undue delay. If the contractor is unable to respond to a service call or restore the service to its normal operational state, the Contractor shall compensate the Government for the downtime by prorating the monthly bill for the time (day) reflective of the period of non-service, equivalent to the downtime of the service. The Contractor will be responsible for ensuring that their personnel are instructed on performing service on Government property and are properly badged and easily identifiable. During normal duty hours, covered in paragraph 1.8.4, the contractor shall respond in person to all service call requests within (24) hours for Hill AFB proper and LMTF, call requests for UTTR (24) hours. The contractor will specify the starting time and duration of any interruptions along with what cameras will be affected. The contractor will provide verbal notification to the on- site COR or designated representative immediately after service has been restored.

1.4.3 Replacement Parts:

The contractor will notify the COR if camera(s) need to be replaced; The Government will procure cameras. All equipment must meet Air Force Mandated Assessment Subsystems PL1 through PL4 applications and configurations, including any model updated versions to the authorized Air Force list. All replaced equipment or parts remain the property of the Government. The Government retains the right to either approve or disapprove all parts, which are other than new OEM, used in performance of this contract. The contractor shall procure all required repair and replacement parts, however it will not be reimbursed as the contract will be a Firm-Fixed Price.

1.4.3.1 Cameras that meet the Air Force Mandate are:

• Aventura CAM-IPE-2XW Internet Protocol (JP) Aventura CAM-IPM-8ZA-36X-1R (PTZ)

• Bosch NWC-04-95-20P Internet Protocol (LP) Camera*

• Bosch NWC-04-95-20P (1/3 Format)*

• Bosch NBN-498-2 lP Internet Protocol (fP) Camera*

• Bosch Auto Dome VG 4-322-ECE IM*

• Bosch Auto Dome VG5-623-ECS*

• Bosch Auto Dome VG5-624-ECS*

• Bosch Auto Dome VG5-724-ECE2*

• Bosch Auto Dome 7000 Internet Protocol (LP) Camera with environmental housing

• Bosch Dinion Internet Protocol (fP) 7000 Camera with environmental housing*

• Bosch DIN ION Internet Protocol (IP) Starlight 7000 HD (NBN-73013-BA)

• Bosch NBN-63013-8

• Bosch NBN-63023-B

• Bosch NBN-71013-B

• Bosch NBN-7 l 022-B

• Burle 300H Camera*

• Burle TC 351 Camera (1/2 inch format)*

• Cohu 4865 Camera (WS3) (2/3 inch format)*

• Cohu 48x Camera (KUMMSC) (2/3 inch format)*

• Cohu 4915/4912-3000 Camera (1/2 inch format)*

• Cohu 3930HD

• Indigo Vision 512147 (PTZ)

• Indigo Vision l l 650-Audio-HD

• IQ Eye 752 Internet Protocol (fP) Camera*

• Lumenera Le l 65M-DN Internet Protocol (IP) Camera*

• Lumenera Le 165ME-DN Internet Protocol (LP) Camera with environmental housing

• Lumenera Le I 65MP-DN Internet Protocol (IP) Camera with environmental housing*

• Pelco ES31CBW35-2N Pan Tilt Zoom (PTZ) System*

• Pelco ES30C/ES31 C Pan Tilt Zoom (PTZ) System ( 1/4 inch format) with/ without optional Wiper*

• Pelco ES4 l 36-2N Esprit ES system Pan Tilt Zoom (PTZ) System (1/4 inch format) with/ without optional Wiper

• Pelco MC365 lH-2 Interior Camera (l/3 inch format) *

• Pelco IXE20 IP Camera*

• Pelco ES4036-5W Esprit Series, with and without wiper, standard and pressurized

• Pelco ES40E36-5W Esprit Series, with and without wiper, standard and pressurized*

• Pelco ES40/4 l Series Positioning System, Analog, PTZ, w/wo wiper Esprit SE Standard & pressurized, model

ES4036-5W

• Pelco ES40E/4 l E Series Positioning System, fP, PTZ, w/wo wiper Esprit SE Standard &

• Pressurized, Model ES40E36-5W

• Pelco LXE21 Internet Protocol (IP)

• Pelco P1220-ESRI (PTZ)

• Pelco Sarix IXE Series Box Cameras w/ Sure Vision 3.0

• YICON SN680D-B-WNIR (PTZ)

• VJCON IQ762Wl-V6 lnternet Protocol (lP)

• Yivotek IP 7151*

• Vivotek SD8364E (PTZ)

• Yivotek lP816A-HP (interior only)

*Indicates item may be legacy but is still approved for use

1.5 Original Equipment Manufacturer (OEM) Parts:

Only new OEM parts or parts of equal quality (when authorized by the Government in advance) shall be used for repair. All replacement parts used for maintenance activities under this contract become the property of the Government. The faulty parts, which were replaced, remain the property of the Government. The contractor may submit a listing of all anticipated parts which will not be new OEM but of equal quality to the COR for review and approval in advance of the work requirements or obtain the approval of the on-site COR or designated representative prior to installation of the parts. The Government retains the right to either approve or disapprove all parts, which are other than new OEM, used in performance of this contract.

1.6 Training: Contractor will provide refresher-training classes on camera system operations when performing on-site preventive maintenance (PMI). Training will consist of camera location, multiplexer operation, and Digital Video Recorder familiarization at all locations with associated equipment. Refresher training classes will be scheduled prior to contractor’s arrival on the installation. Additionally, the contractor shall provide a listing of all cameras and associated equipment locations.

1.7 Period of Performance: The period of performance will be for (1) base year and (4) option years.

1.8 General Information

1.8.1 Quality Control (QC): The contractor shall develop and maintain an effective quality control program, to ensure services are performed in accordance with this SOW. The contractor shall develop and implement procedures to identify, prevent, and ensure non-recurrence of defective services. The contractor’s quality control program is the means by which he assures himself that his work complies with the requirement of the contract. A written quality control plan (QCP) will be submitted within 30 days after contract award for acceptance. After acceptance of the quality control plan the contractor shall receive the contracting officer’s acceptance in writing of any proposed change to his QC system. The contractor is highly encouraged to provide BOSCH Camera Operators Certification for all installers and p r o g r a m m e r s .

1.8.2 Quality Assurance: The government shall evaluate the contractor’s performance under this contract in accordance with the Quality Assurance Surveillance Plan. This plan is primarily focused on what the Government must do to ensure that the contractor has performed in accordance with the performance standards. It defines how the performance standards will be applied, the frequency of surveillance, and the minimum acceptable defect rate (s).

1.8.3 Recognized Holidays: The contractor is not required to perform PMI services on holidays.

New Year’s Day Labor Day Martin Luther King Jr.’s Birthday Columbus Day President’s Day Veteran’s Day Memorial Day Thanksgiving Day Independence Day Christmas Day

1.8.4 Hours of Operation: The contractor is responsible for conducting business, between the hours of 0730-1630 Monday thru Friday except Federal holidays or when the Government facility is closed due to local or national emergencies, administrative closings, or similar Government directed facility closings. For other than firm fixed price contracts, the contractor will not be reimbursed when the government facility is closed for the above reasons.

The Contractor must at all times maintain an adequate workforce for the uninterrupted performance of all tasks defined within this SOW when the Government facility is not closed for the above reasons.

1.8.5 Place of Performance: The work to be performed under this contract will be performed at the following locations: Bldg.’s 5, 10, 25, 37, 43, 45, 133, 220, 225, 233, 238, 270, 295, 408, 501, 510, 520, 533, 541, 542, 578, 590, 674, 680, 772, 778, 845, 850, 870, 886, 900, 905, 911, 914, 990, 1211, 1214, 1298, 1299, 1424, 1477, 1926, 1930, 1938, 1964, 2102, 2103, 4301, 40018, 40020, 1A, NE of B-4301, Near 23, Near Tank 873, NW of B-20050. Area’s Hill AFB Flight line (23) locations, Hill AFB Fuel Pumps (8) locations, Hill AFB street cameras (23), Little Mountain Test Facility (LMTF) (9) locations, Utah Training and Test Range (UTTR) (5) locations. A detail outline of cameras locations will be maintained and given to contractor by 75 SFS/ESS. Work will also be performed at Bldg. 408/Base Defense Operation Center (BDOC) to verify all systems are operat ional .

1.8.6 Contractor Consent to Background Checks: The contractor and, as applicable, subcontractor shall not employ persons for work on this contract if such employee is identified as a potential threat to the health, safety, 1547444163A Highlight security, general well-being or operational mission of the installation and its population, nor shall the contractor or subcontractor employ persons under this contract who have an outstanding criminal warrant as identified by Utah Criminal Justice Information System (UCJIS) through the National Crime Information Center. UCJIS checks will verify if a person is wanted by local, state, and federal agencies. All contractor and subcontractor personnel must consent to UCJIS background checks. Contractor and subcontractor personnel who do not consent to an UCJIS check will be denied access to the installation. Information required to conduct an UCJIS check includes: full name, driver’s license number, and/or social security number, date of birth of the person entering the installation, and completion of a background check questionnaire. The contractor shall provide this information using the Hill AFB Form 496, Application for Installation Access Control, and shall submit it in conjunction with the contractor’s request for either base or vehicle passes. Contractor will also provide the date of birth, driver’s license number or Identification number, along with the full name of the person or persons whom will need access to the installation to perform maintenance to the SFS/Electronic Security System (ESS) office no later than five business days prior to expected arrival to the installation. Completion of a successful UCJIS check does not invalidate the requirement for an escort when contractor or subcontractor personnel are working within controlled or restricted areas. Contractors shall ensure their employees and those of their subcontracts have the proper credentials allowing them to work in the United States.

Persons later found to be undocumented or illegal aliens will be remanded to the proper authorities. The contractor shall not be entitled to any compensation for delays or expenses associated with complying with the provisions of this clause. Furthermore, nothing in this clause shall excuse the contractor from proceeding with the contract as required.

1.8.7 Access to Installation during Force Protection Conditions (FPCONs): Contractor access during FPCONs Charlie and Delta can be denied or limited as determined appropriate by the COR or higher authority.

1.8.8 Contractors Working in Controlled or Restricted Areas:

The unit requesting contract support will provide escort (s) for contractors’ at all times when within a controlled area.

Contractors shall not escort other contractor employees within controlled or restricted areas. In addition, contractors shall fulfill, maintain, and comply with all security requirements IAW AFI 31-101, Integrated Defense, and command/local directives.

1.8.9 Access to Government Facilities within Controlled or Restricted Areas:

The contractor shall comply with security regulations imposed by the installation commander and/or the agency responsible for the project location. Due to specific mission requirements inherent in the nature of controlled or restricted areas on Hill AFB, the government may direct the contractor to leave the controlled or restricted areas at any given time.

1.8.10 Contractors Responsibilities while Working within Controlled or Restricted Areas:

Only contractor personnel with proper authority and qualifications shall enter a controlled or restricted area unless escorted. The 75 SFS ESS will coordinate escort requirements as needed.

1.8.11 Contracting Officer Representative (COR): The (COR) will be 75 SFS/ESS Non-Commissioned Officer in Charge (NCOIC) or representative located in bldg. 408, contact information is outlined below in 1.8.12. The COR monitors all technical aspects of the contract and assists in contract administration. The COR is authorized to perform the following functions: assure that the Contractor performs the technical requirements of the contract, perform inspections necessary in connection with contract performance, maintain written and oral communications with the Contractor concerning technical aspects of the contract, issue written interpretations of technical requirements, including Government drawings, designs, specifications, monitor Contractor's performance and notifies both the Contracting Officer and Contractor of any deficiencies, coordinate availability of government furnished property, and provide site entry of Contractor personnel. A letter of designation issued to the COR, a copy of which is sent to the Contractor, states the responsibilities and limitations of the COR, especially with regard to changes in cost or price, estimates or changes in delivery dates. The COR is not authorized to change any of the terms and conditions of the resulting order.

1.8.12 Key Personnel: The follow personnel are considered key personnel by the government:

Installation Security Section NCOIC, Electronic Systems Security 75th Security Forces Squadron 75th Security Forces Squadron Phone: 801-777-6615 Phone: 801-777-5532 Currently:

Email: robert.nolan.1@us.af.mil Email: luke.sitzman@us.af.mil mailto:robert.nolan.1@us.af.mil mailto:luke.sitzman@us.af.mil

1.8.13 The contractor shall provide a contract manager who shall be responsible for the performance of the work.

The name of this person and an alternate who shall act for the contractor when the manager is absent shall be designated in writing to the contracting officer. The contract manager or alternate shall have full authority to act for the contractor on all contract matters relating to daily operation of this contract. The contract manager or alternate shall be available between 0730-1630, Monday thru Friday except Federal holidays or when the government facility is closed for administrative reasons.

1.8.14 Identification of Contractor Employees: All contract personnel attending meetings, answering Government telephones, and working in other situations where their contractor status is not obvious to third parties are required to identify themselves as such to avoid creating an impression in the minds of members of the public that they are Government officials. They must also ensure that all documents or reports produced by contractors are suitably marked as contractor products or that contractor participation is appropriately disclosed.

1.8.15 Data Rights: The Government has unlimited rights to all documents/material produced under this contract.

All documents and materials, to include the source codes of any software, produced under this contract shall be Government owned and are the property of the Government with all rights and privileges of ownership/copyright belonging exclusively to the Government. These documents and materials may not be used or sold by the contractor without written permission from the Contracting Officer. All materials supplied to the Government shall be the sole property of the Government and may not be used for any other purpose. This right does not abrogate any other Government rights.

1.8.16 Administrator and Operator Passwords: All passwords (i.e. for Administrator and Operator) for the systems of operation will be turned over to 75 SFS/ESS upon completion of project.

1.8.17 Government Furnished Items and Services:

• Facilities: Security Forces will coordinate escorts, building access, communication room access and access to additional rooms and facilities as required.

• Utilities: The Contractor shall instruct employees in utilities conservation practices. The contractor shall be responsible for operating under conditions that preclude the waste of utilities.

• Equipment: The Government will not provide any equipment for this contract.

• Materials: The Government will not provide any materials for this contract.

Attachment: List of Equipment

Camera

Location Responsible Org PTZ Existing make and model, proposed replacement, added notes.

Survey Notes

Little

Mountain

LM1 Compound Gate Slide 4 Camera 1, SW External 4301

SFS No Axis P3364-L Corner Mount, Cat 5E Outdoor Rated; 100'

LM2 Building 4301 External NW corner Slide 4 Camera 2

SFS Yes Axis Q6045-E High Zoom Camera, Prarpet Mount, Cat 5E Outdoor Rated; 200'

LM3 Building 850 West side External Slide 4 Camera 3

SFS Yes Axis Q6045-E High Zoom Camera, Tripod w/ Brace, Cat 5E Outdoor Rated; 200';

Needs 12 Port Switch

LM4 Building 850 external East side Slide 4 Camera 4

SFS Yes Axis Q6045-E Prapret Mount, Cat 5E Outdoor Rated; 200'

LM5 Building 4301 internal Slide 4 Camera 5

SFS No Axis P3364-L Interior Camera with Standard Lighting; replace with new dome and new wall mount; needs encoder/decoder

LM6 Building 4301 internal vault Slide 4 Camera

SFS No Axis P3364-L 2MP IR dome camera with mount;

needs encoder/decoder

LM7 Building 501 external South Slide 4 Camera

SFS Yes Axis Q6045-E Mount below existing camera;

Prapret Mount, Cat 5E Outdoor Rated; 200'; Needs 12 Port Switch

LM8 Main Gate inbound Slide 4 Camera 8

SFS No Axis P3364-L Requires encoder to switch; Cat 5E Indoor; Contractor shall run; * needs to be split one for network and the other to monitor

LM9 Main Gate outbound Slide 4 Camera 9

SFS No Axis P3364-L Requires encoder to switch; Cat 5E Indoor; Contractor shall run; * needs to be split one for network and the other to monitor

LM10 Building 2103 (water tower) external Slide 4 Camera 10

SFS Yes Axis Q6045-E Semi harsh conditions with possibility of lightning strike, Prapret Mount with brace for high winds, Cat 5E; 150'

LM11 North fence light post to watch the fence line and the exposed hiding spots from other cameras

SFS Yes

Requires 110 power supply, will require trenching, PTZ pole mount;

*Need Measurement*

UTTR

(ANALOG)(n o service)

UT1 Munitions Storage area gate Slide 5 Camera 1

Cisco Point-to-Point Wireless, Parapet mount; *Possible Pole Mount, does it need power*

UT2 Building 40020 VCC internal Slide 5 Camera

SFS No

Ceiling Dome; 50' Cat 5E Indoor Rated

UT3 Main gate inbound Slide 5 Camera 3

Encoder/Decoder

UT4 Main gate outbound Slide 5 Camera 4

SFS No

Fixed; Encoder/Decoder

Flight Line

FL1 Building 1477 Hotpad Slide 9 Camera 1

SFS, OSS Yes Pole Mount, Requires cable and power from wireless to camera; Cat 5E Outdoor; 25'

Bosch

FL2 Building 772 Zulu area Slide 9 Camera 3

SFS, OSS Yes Axis Q6045-E Pole mount, requires 30' trench from building to pole, Cat 5E Outdoor, 100'

FL3 778 Zulu SFS, OSS Yes Axis Q6045-E Pole mount, requires 30' trench from building to pole, Cat 5E Outdoor, 100'

FL4 Building 772 Zulu area OSS Alert light pole camera Slide 9 Camera 4

OSS Yes Axis 6032-E

FL5 Hot Pad 1 Pole Mount Slide 9 Camera 5

OSS Yes Axis 6032-E

FL6 Building 900 NW Tarmac Slide 10 Camera 1

SFS, OSS, Fuels, LRS

Yes Axis Q6045-E Corner mount, Cat 5E Outdoor;

200'

FL7 Building 900 NE Tarmac Slide 10 Camera 2

SFS, OSS, Fuels, LRS

Yes Axis Q6032-E

FL7.5 Building 45 NW corner

SFS, OSS Yes Axis Q6045-E Corner mount and camera need to be purchased and provided to the PM. Will not be installed at this time due to construction on the building.

FL8 Building 43 Tarmac Slide 10 Camera 4

SFS, OSS Yes Axis Q6045-E Cat 5E Outdoor; 250', use existing conduit

FL9 Building 37 Tarmac Slide 10 Camera 5

SFS, OSS Yes Axis Q6045-E Cat 5E Outdoor; 250', use existing conduit

FL10 Building 25 Tarmac Slide 10 Camera 6

SFS, OSS Yes Axis Q6045-E Cat 5E Outdoor; 250', use existing conduit

FL11 Building 1 west to watch gate 52-P and hush houses Slide 10 Camera 7

SFS, OSS Yes Axis Q6045-E Cat 5E Outdoor; 200'

FL12 Building 5053 Tarmac Slide 10 Camera 8

SFS Yes Pole mount, Cat 5E Outdoor; 40'

Bosch

?? Building 5053 Tarmac OSS Slide 10 Camera 8b (not shown)

SFS, OSS Yes

Axis

FL13 Building 10 Tower North Slide 10 Camera 9

SFS, OSS Yes Axis Q6045-E Requires tie in to existing lightning protection, use existing BNC

FL14 Building 10 Tower North Slide 10 Camera 9b

(OSS)

SFS, OSS Yes Axis Q6032-E

FL15 Building 10 Tower South Slide 10 Camera 10

SFS Yes Axis Q6045-E Requires tie in to existing lightning protection, use existing BNC

FL16 Building 10 Tower South Slide 10 Camera 10b

(OSS)

SFS, OSS Yes Axis Q6032-E

FL17 Building 233 Northeast corner Slide 10 Camera 11

SFS, OSS Yes Axis Q6045-E Mk II Corner mount, Cat 5E Outdoor;

200'

FL18 Building 220 NE Tarmac Slide 10 Camera 12

SFS, OSS Yes Axis Q6045-E Encoder/Decoder required use existing BNC

FL19 Building 225 SW corner area to watch personnel gate and Building 237 Slide 10 Camera 14

SFS, OSS Yes Axis Q6045-E Corner mount, Cat 5E Outdoor;

200'

FL20 Hanger 1 West, roof mount Slide 10 Camera 23

SFS, OSS Yes Axis Q6055-E

FL21 Hanger 1 East, roof mount Slide 10 Camera 24

SFS, OSS Yes Axis Q6032-E

FL22 Building 270 NW corner Slide 10 Camera 25

SFS, OSS Yes Axis Q6045-E Corner mount, Cat 5E Outdoor;

250'

FL23 Building 590 SE Tarmac Slide 11 Camera 6

SFS, OSS Yes Axis Q6045-E Parapet Mount, Cat 5E; 150' outdoor; *remove old camera*

FL24 Building 590 NE Tarmac Slide 11 Camera 7

SFS, OSS Yes Axis Q6045-E Parapet Mount, Cat 5E; 150' outdoor; *remove old camera*

FL25 Building 295 Tarmac. Slide 11 Camera 8

SFS, OSS Yes Axis Q6045-E Corner mount, Cat 5E Outdoor;

200'

FL26 Building 578 NE corner Slide 11 Camera 11

OSS Yes

Axis

FL27 Building 680 SW corner Slide 9

SFS, OSS Yes Axis Q6045-E Corner mount, Cat 5E Outdoor;

350' + signal booster

FL28 Building 680 SW corner Slide 9 Camera

OSS Yes Axis Q6032

FL29 Building 674 SW corner Slide 9

SFS, OSS Yes Axis Q6045-E Corner mount, Cat 5E Outdoor;

300'

Command Center Building 133

CC1 Building 133 NW Outside Slide 10 Camera 15

SFS, CC Yes Axis Q6045-E MK II Pole mount, Cat 5E; 125' in conduit

CC2 Building 133 North, Northwest

DOOR

Outside Slide 10 Camera 16

SFS, CC Yes Axis Q6045-E MK II Parapet Mount, Cat 5E; 150' in conduit

CC3 Building 133 North, Northeast DOOR Outside Slide 10 Camera 17

SFS, CC Yes Axis Q6045-E MK II Parapet Mount, Cat 5E; 150' in conduit

CC4 Building 133 Southwest Outside Slide 10 Camera 18

SFS, CC Yes Axis Q6045-E MK II Parapet Mount, Cat 5E; 150' in conduit

CC5 Building 133 South door Outside Slide 10 Camera 19

SFS, CC Yes Axis Q6045-E MK II Parapet Mount, Cat 5E; 150' in conduit

Gates

G1 Building 541 South gate Slide 11 Camera 3

SFS Yes Axis Q6045-E MKII Pole mount, encoder/decoder required

G2 Building 542 Lobby Slide 11 Camera 4

SFS No Axis M3005 Interior mini dome in ceiling, Cat 5E interior, 50'

G3 Building 542 Parking Slide 11 Camera 5

SFS No Axis P3364-L Parapet Mount, Cat 5E Outdoor;

100'

G4 Building 886 SW Gate inbound Slide 12 Camera 2

SFS Yes Axis Q6045-E Pole mount, 50' trench, Cat 5E Outdoor; 100'

G5 Building 886 SW Gate outbound Slide 12 Camera 3

SFS Yes Axis 6045-E Pole mount, encoder/decoder required, use existing BNC

G6 Building 1299 West Gate VCC Parking lot Slide 12 Camera 4

SFS No Axis 6045-E

G7 Building 1299 West Gate Slide 12 Camera 5

SFS Yes Axis Q6045-E Pole mount use existing Cat 6 cable

G8 Building 1298 West Gate personnel revolving gate Slide 12 Camera 7

SFS No Axis P3364-L tie into existing system and need license

G9 Building 1299 VCC Lobby West Gate Slide 12 Camera 6

SFS No Axis P3364-L Interior mini dome in ceiling; Cat 6 interior; 30'

G10 Building 1964 Roy gate Truck traffic Slide 7 Camera 1

SFS Yes Axis Q6045-E Mk II Parapet Mount extension, Cat 5E Outdoor; 50'

G11 Building 1964 Roy Gate Commercial drivers VCC lobby internal Slide 7 Camera

SFS No Axis P3364-L Interior mini dome in ceiling; Cat 5E interior; 25'

G12 Building 1964 Roy Gate inbound and outbound traffic (light pole north mount) Slide 7 Camera 3

SFS Yes Axis Q6045-E Requires existing cable to be moved to self-contained box; hand hole; Pole mount

G13 West Gate Outbound bld

SFS Axis Q6045-E

G14 MSA I V-105

Gate

SFS No Axis P3364-L

G15 MSA I V-105

Gate Access Point

SFS No Axis P3364-L

SFS

LRS Fuels

LRS1 Tank Farm Tank 873 Slide 14 Camera 1

LRS Yes Axis Q6045-E Pole mount, Cat 5E Outdoor in explosive sealed conduit; 75'

LRS2 Tank Farm Tank 882 Slide 14 Camera 2

LRS Yes

Pole Mount, Point-to-Point Cisco Wirless (reuse firtide)

LRS3 Hydrant Building 905 NW corner Slide 14 Camera 3

LRS Yes Axis Q6045-E Corner mount, Cat 5E Outdoor in explosive sealed conduit; 100'

LRS4 Hydrant Building 905 SE corner Slide 14 Camera 4

LRS Yes Axis Q645-E Corner mount, Cat 5E Outdoor in explosive sealed conduit; 100'

LRS5 Building 914 North Slide 14 Camera 5

LRS Yes Axis Q6045-E Corner mount, Cat 5E Outdoor in explosive sealed conduit; 100'

LRS6 Building 911 NE Slide 14 Camera 6

LRS Yes Axis Q6045-E Corner mount, Cat 5E Outdoor in explosive sealed conduit; 100'

LRS7 Building 911 SW Slide 14 Camera 7

LRS Yes Axis Q6045-E Corner mount, Cat 5E Outdoor in explosive sealed conduit; 50'

LRS8 Building 911 SW side, lower mount to watch service station

LRS No Axis Q1765-LE-PT Telephoto camera, wall mount, Cat 5E Outdoor in explosive sealed condutit; 50'

LRS9 Building 911 LRS Axis Q1765-LE-PT

Buildings

B1 Building 1211 NW External Slide 8

SFS, SC Yes Bosch tie in to existing VMS, license required

B2 Building 1211 NE External Slide 8

SFS, SC Yes Bosch tie in to existing VMS, license required

B3 Building 1211 SW external Slide 8

SFS, SC Yes tie in to existing VMS, license required

B4 Building 1211 SE External Slide 8

SFS, SC Yes Bosch tie in to existing VMS, license required

B5 Building 1211 North Hallway internal Slide 8

SFS, SC No Bosch tie in to existing VMS, license required

B6 Building 1211 North Computer door Slide 8

SFS, SC No Bosch tie in to existing VMS, license required

B7 Building 1211 South Computer room door Slide 8

SFS, SC No Bosch tie in to existing VMS, license required

B7.5 Building 1211 SIPR Room

SFS, SC No Axis M3005

B8 Building 1214 NE External Slide 8

SFS, SC Yes Axis M7001 Video Encoder tie in to existing VMS, license required

B9 Building 1214 SW External Slide 8

SFS, SC Yes tie in to existing VMS, license required

B10 Building 1214 Computer Room East internal Slide 8

SFS, SC No Axis M7001 Video Encoder tie in to existing VMS, license required

B11 Building 1214 Computer Room West internal Slide

SFS, SC No Axis M7001 Video Encoder tie in to existing VMS, license required

B12 Building 533 Warrior Fitness Center Slide 11 Camera 2

SFS, FSS Yes AXIS Q6045 Cat 5E Outdoor; 100'

B13 Building 533 Warrior Fitness Center internal cameras Slide 11 Camera(s)

SFS, FSS No Axis M7016 Video Encoder Encoder/Decoder

B14 Building 520 Hess Fitness Center Slide 11 Camera(s)

SFS, FSS No Axis M7016 Video Encoder Encoder/Decoder, requires T-connection for multi streaming

B15 Building 850, Bay G Slide 13

SFS No Axis M3005 Ceiling Mount, Cat 6 Indoor; 100'

B16 Building 850, Bay F Slide 13 Camera 1

SFS, SC No Axis P3364-L Parapet Mount, Cat 6 Outdoor, requires conduit; 50'

B17 Building 850, Bay F Slide 13 Camera 2

SFS, SC No Axis P3364-L Corner Mount, Cat 6 Indoor; 250'

B18 Building 850, Bay F Slide 13 Camera 3

SFS, SC No Axis P3364-L Corner mount, Cat 6 Indoor; 100'

B19 Building 850, Bay F Slide 13 Camera 4

SFS, SC No Axis P3364-L Pole Mount, Cat 6 Indoor; 50'

B20 Building 850, Bay F Slide 13 Camera 5

SFS, SC No Axis P3364-L Ceiling Mount, Cat 6 Indoor; 75'

B21 Building 850, Bay F Slide 13 Camera 6

SFS, SC No Axis P3364-L Ceiling Mount, Cat 6 Indoor; 150'

B22 Building 5 SE corner External (to watch traffice and Gate 44-V Slide 10 Camera 20

SFS Yes Axis Q6045-E Corner mount, Cat 5E Outdoor;

260'

B23 Building 36 NE Corner External (to watch Canterbury gate) Slide 10 Camera 21

SFS, OSS No Axis P3364 Corner mount, Cat 5E Outdoor; 80'

B24 Building 36 SW corner (to watch traffic) Slide 10 Camera 22

SFS Yes Axis Q6045-E Corner mount, Cat 5E Outdoor;

200'

B25 Building 238 SW corner External (for watching traffic) Slide 11 Camera 1

SFS Yes Axis Q6045 Mk II Corner mount, Cat 5E Outdoor;

200'

B26 Building 845 NW corner External (for watching traffic) Slide 12 Camera 1

SFS Yes Corner mount, Cat 5E Outdoor;

450' + signal booster

B27 Building 900 South (for watching door entry and traffic) Slide 10 Camera 3

SFS, LRS Yes Axis Q6045-E Corner mount, Cat 5E Outdoor;

250'

B28 Building 408 North External Slide 10 Camera 25

SFS Yes Axis Q6032-E requires licenses

B29 Building 408 Lobby 1 Slide 10 Camera 25

SFS Yes Axis M5013 requires licenses

B30 Building 408 Lobby 2 Slide 10 Camera 25

SFS No Axis M5013 requires licenses

B31 Building 408 Lobby 3/Hallway Slide 10 Camera 25

SFS No Axis M5013 requires licenses

B32 Building 408 Armory Slide 10 Camera 25

SFS No Axis M5013 requires licenses

B33 Building 408 Main hall East/West Slide 10 Camera 25

SFS No Axis M5013 requires licenses

B34 Building 408 Main hall North/South Slide 10 Camera 25

SFS No Axis M5013 requires licenses

B35 Building 408 OSI lobby Slide 10 Camera 25

SFS No Axis M5013 requires licenses

B36 Building 408 Interrogation Room

SFS Yes Axis M5013

B37 408 Warehouse

SFS

B38 408 Warehouse

SFS

B39 408 Warehouse

SFS

B40 Building 1217 Entry

SFS, ICBM Axis P3228-LV

729 ACS

ACS1 Bldg 1926 - 1926 01