JRC_Lighting_equipment_approval.pdf

Date: Mar 19, 2015 Page 1/2

Transmittal JRC, Inc.

3041 West 2100 South Salt Lake City UT 84119 Phone: (801) 972-3970 From: Richard Palmer

FF00009 Page 1/2JRC, Inc.

Project HAFB B1 A1 Quote# JRC15-48426 Location To Envision Engineering. PC

240 E. Morris Ave, Suite 200 Salt Lake City UT 84115 Contact: Alexander Hood

ATTACHED WE ARE SENDING YOU 1 COPIES OF THE FOLLOWING ITEMS:

Drawings Specifications Other:

Prints Information Plans X Submittals

THESE ARE TRANSMITTED FOR:

X Prior Approval Resubmittal for Approval Record

Approval Corrections Bids due on:

Approval as Submitted Your Use Other:

Approval as Noted Review and Comment

Type MFG Part DL1 Gotham Lighting EVO 35/14 6AR WD LS MVOLT DLE Gotham Lighting EVO 35/14 6AR WD LS MVOLT EL EX1 Lithonia Lighting LQM S W 3 R 120/277 EL N SD GB1 Lithonia Lighting 2AV G 254T5HO MDR MVOLT 2 GEB115

Item Note: T5HO requires two ballasts for inboard outboard switching GB1E Lithonia Lighting 2AV G 254T5HO MDR MVOLT 2

GEB115 EL14

Item Note: T5HO requires two ballasts for inboard outboard switching

GB2 Lithonia Lighting 2AV G 2 28T5 MDR MVOLT GEB115S Item Note: Step dim ballast

GB2E Lithonia Lighting 2AV G 2 28T5 MDR MVOLT GEB115S

EL14

Item Note: Step dim ballast GB3 Lithonia Lighting 2AV G 2 14T5 ADP MVOLT GEB115S

Item Note: Step dim ballast. Verify if ADP is really required.

GB3E Lithonia Lighting 2AV G 2 14T5 ADP MVOLT GEB115S

EL14

Item Note: Step dim ballast. Verify if ADP is really required.

PD2 Lithonia Lighting TAVSM 2 54T5HO MDR ULR MVOLT 2

GEB10PS AVACF24

Item Note: T5HO requires two ballasts for inboard outboard switching. Verify lengths req.

PD3 Lithonia Lighting TAVSM 2 54T5HO MDR ULR MVOLT 2

GEB10PS AVACF24

Item Note: T5HO requires two ballasts for inboard outboard switching. Verify lengths req.

PDE Lithonia Lighting C 2 32 MVOLT GEB10PS EL14 HC

WGCUN NST

RBL Miscellaneous Supplier FBO SG1 Lithonia Lighting C 2 32 MVOLT GEB10PS UC1 Lithonia Lighting STK18 UC1 Lithonia Lighting STKTRANS24

Date: Mar 19, 2015 Page 2/2

Transmittal JRC, Inc.

3041 West 2100 South Salt Lake City UT 84119 Phone: (801) 972-3970 From: Richard Palmer

FF00009 Page 2/2JRC, Inc.

Type MFG Part W Lithonia Lighting CSXW LED 30C 700 40K T3M MVOLT

PE DDBXD

WM1 Lithonia Lighting WT5 2 28T5 MVOLT GEB10PS EL14

WW1-120 Gotham Lighting ICO ADJ 35/20 6AC T00 25D 120 WW1-277 Gotham Lighting ICO ADJ 35/20 6AC T00 25D 277

WWP Winona LSRU LS LED 120V P1 SCBA X MOD Item Note: Modified to be LED with 35k color. Lumen output to be 1000

Submitted by JRC, Inc.

Job Name:

HAFB B1 A1

Catalog Number:

EVO 35/14 6AR WD LS MVOLT

Notes:

Type:

DL1

JRC15-48426

Luminaire Type:

Catalog Number (autopopulated):

GOTHAM ARCHITECTURAL DOWNLIGHTING | 1400 Lester Road Conyers GA 30012 | P 800.315.4982 | gothamlighting.com

© 2010-2014 Acuity Brands Lighting, Inc. All Rights Reserved. Rev. 12/09/14. Specifications subject to change without notice.PAGE 1 OF 4

EVO-6-OPEN

Gotham Architectural Downlighting LED Downlights

6” Evo®

Downlight

Solid-State Lighting

OPTICAL SYSTEM

MECHANICAL SYSTEM

4” vertical adjustment

ELECTRICAL SYSTEM

LISTINGS

• Fixtures are CSA certified to meet US and Canadian standards; wet location, covered ceiling

WARRANTY

• 5-year limited warranty. Complete warranty terms located at:

www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx

EXAMPLE: EVO 35/10 6AR 120 AZ10

Series Color temperature Nominal lumen values Aperture/Trim color Distribution Finish Voltage

EVO 27/ 2700 K

30/ 3000 K 35/ 3500 K 41/ 4100 K

10 1000 lumens 14 1400 lumens 18 1800 lumens 22 2200 lumens

6AR Clear 6PR Pewter 6WTR Wheat 6GR Gold 6WR1 White 6BR1 Black

(blank) 1.0 s/mh VND Very narrow (0.5 s/mh) ND Narrow (0.6 s/mh) MD Medium (0.8 s/mh) WD Wide (1.2 s/mh)

(blank) Semi-specular LD Matte diffuse LS Specular

MVOLT

Driver Options

AZ103 Philips Xitanium 0-10V dimming driver. Minimum dimming level 10%

EZB eldoLED SOLOdrive 0-10V dimming driver. Mini-mum dimming level <1%. 120V or 277V

EDAB eldoLED SOLOdrive DALI dimming driver. Minimum dimming level <1%. 120V or 277V

EDXB eldoLED POWERdrive DMX with RDM (remote device management). Minimum dimming level <1%.

Includes termination resistor. 120V or 277V

ECOS23,4,5 Lutron® Hi-Lume® 2-wire forward-phase dimming driver. Minimum dimming level 1%

ECOS33,4 Lutron® Hi-Lume® 3-wire or EcoSystem® dimming driver. Minimum dimming level 1%

SF Single fuse NPP16D nLight® network relay pack with 0-10V dimming. Refer to TN-602.

NPP16D ER6 nLight® network relay pack with 0-10V dimming for emergency circuit operation.

Refer to TN-602.

NPS80EZ nLight® dimming pack controls 0-10V eldoLED drivers.

NPS80EZ ER6 nLight® dimming pack controls 0-10V eldoLED drivers. ER controls fixtures on emergency circuit.

TRW7 White painted flange

TRBL8 Black painted flange EL9 Emergency battery pack with integral test switch ELR9 Emergency battery pack with remote test switch CRI90 High CRI (90+) CP10 Chicago plenum BGTD Bodine generator transfer device RRL__ RELOC®-ready luminaire connectors enable a simple and consistent factory installed op-tion across all ABL luminaire brands. Refer to RRL for complete nomenclature.

ACCESSORIES order as separate catalog numbers (shipped separately)

SCA6 Sloped ceiling adapter. Degree of slope must be specified (10D, 15D, 20D, 25D, 30D). Ex: SCA6 10D. Refer to TECH-190.

CTA4-8 YK Ceiling thickness adapter (extends mounting frame to accommodate ceiling thickness up to 2”).

GVRT Vandal-resistant trim accessory. Refer to TECH-200.

ISD BC 0-10V wallbox dimmer. Refer to ISD-BC.

FEATU

RES

ORDERIN

G IN

FORM

ATION

HAFB B1 A1

Catalog Number:

EVO 35/14 6AR WD LS MVOLT

Notes:

Type:

DL1

JRC15-48426

GOTHAM ARCHITECTURAL DOWNLIGHTING | 1400 Lester Road Conyers GA 30012 | P 800.315.4982 | gothamlighting.com

© 2010-2014 Acuity Brands Lighting, Inc. All Rights Reserved. Rev. 12/09/14. Specifications subject to change without notice. PAGE 2 OF 4

EVO-6-OPEN

6” EVO

Downlight Solid-State Lighting

PH

OTOM

ETRY

All dimensions are inches (centimeters) unless otherwise noted.

7 9 16 [19.1]

Aperture: 6-1/4 (15.9) Ceiling Opening: 7-1/8 (18.1) Overlap Trim: 7-1/2 (19.1)

15 7 8 [40.3]

15 1 16 [38.3]

ORDERING NOTES

1. Not available with finishes.

2. Not valid with emergency options, i.e., EL and ELR.

3. Refer to TECH-240 for compatible dimmers.

4. Not available with nLight® option.

5. 120V only.

6. For use with generator supply EM power. Will require an emergency hot feed and normal hot feed.

7. Not available with white reflector.

8. Not available with black reflector

9. For dimensional changes, refer to TECH-140. Not available with

CP option. Specify 120V or 277V. Not available with 347V.

10. Not available with EL or ELR options.

DIM

EN

SION

AL DATA

ELECTRICAL

N

OTES

WATTAGE CONSUMPTION MATRIX

LUMENS WATTAGE LUMENS per WATT

1000 18 61

1400 25 63

1800 28 66

2000 32 67 nLight® Control Accessories:

Order as separate catalog number. Visit www.sensorswitch.com/nLight for complete listing of nLight controls.

WallPod stations Model number Occupancy sensors Model number On/Off nPODM [color] Small motion 360°, ceiling (PIR / dual tech) nCM 9 / nCM PDT 9 On/Off & Raise/Lower nPODM DX [color] Large motion 360°, ceiling (PIR / dual tech) nCM 10 / nCM PDT 10 Graphic Touchscreen nPOD GFX [color] Wide view (PIR / dual tech) nWV 16 / nWV PDT 16 Photocell controls Model number Wall Switch w/ Raise/Lower (PIR / dual tech) nWSX LV DX / nWSX PDT LV DX On/Off & Dimming nCM ADCX Cat-5 cables (plenum rated) Model number

10', CAT5 10FT CAT5 10FT J1

15', CAT5 15FT CAT5 15FT J1AVAILABILITY/COMPATIBILITY -- INITIAL LUMENS

LED INITIAL LUMENS

PRODUCT LUMENS WATTS EL/ELR ELRHL

EVO 6" 1000 22 405 N/A

EVO 6" 1400 30 736 N/A

EVO 6" 1800 38 821 N/A

EVO 6" 2200 32 1078 N/A

HAFB B1 A1

Catalog Number:

EVO 35/14 6AR WD LS MVOLT

Notes:

Type:

DL1

JRC15-48426

GOTHAM ARCHITECTURAL DOWNLIGHTING | 1400 Lester Road Conyers GA 30012 | P 800.315.4982 | gothamlighting.com

© 2010-2014 Acuity Brands Lighting, Inc. All Rights Reserved. Rev. 12/09/14. Specifications subject to change without notice.PAGE 3 OF 4

EVO-6-OPEN

EVO 35/18 6AR LS INPUT WATTS: 28.1, DELIVERED LUMENS: 1858.1, LM/W=66.1, 1.1 S/MH, TEST NO. LTL20947

PH

OTOM

ETRY

Distribution Curve Distribution Data Output Data Coefficient of Utilization Illuminance: Single Luminaire 30” Above Floor

6” EVO

Downlight

Solid-State Lighting

PHOTOMETRY NOTES

0° 20°

40°

60°

80°

Ave Lumens

Zone Lumens % Lamp 0° - 30° 0° - 40° 0° - 60° 0° - 90°

90° - 180° 0° - 180°

1374.7 1772.2 1856.8 1858.1

0.0 1858.1

74.0 95.4 99.9 100.0 0.0

*100.0 *Efficiency

%02fp pc 80% 70% 50% pw 50% 30% 10% 50% 30% 10% 50% 30% 10%

R C

R

50% beam - 55.6°

10% beam - 77.0°

Mounting Height

Inital FC Center Beam Diameter FC Diameter FC

8.0 10.0 12.0 14.0 16.0

57.1 30.7 19.1 13.1 9.5

5.8 7.9 10.0 12.1 14.2

28.6 15.4 9.6 6.5 4.7

8.7 11.9 15.1 18.3 21.5

5.7 3.1 1.9 1.3 0.9

EVO 35/10 6AR LS INPUT WATTS: 18.4, DELIVERED LUMENS: 1113.4, LM/W=60.5, 1.1 S/MH, TEST NO. LTL21133

EVO 35/14 6AR LS INPUT WATTS: 24.6, DELIVERED LUMENS: 1538.8, LM/W=62.6, 1.0 S/MH, TEST NO. LTL21127

0° 20°

40°

60°

80°

Ave Lumens

Zone Lumens % Lamp 0° - 30° 0° - 40° 0° - 60° 0° - 90°

90° - 180° 0° - 180°

822.0 1062.1 1112.7 1113.4

0.0 1113.4

73.8 95.4 99.9 100.0 0.0

*100.0 *Efficiency

%02fp pc 80% 70% 50% pw 50% 30% 10% 50% 30% 10% 50% 30% 10%

R C

R

50% beam - 56.3°

10% beam - 77.2°

Mounting Height

Inital FC Center Beam Diameter FC Diameter FC

8.0 10.0 12.0 14.0 16.0

33.6 18.1 11.3 7.7 5.6

5.9 8.0 10.2 12.3 14.4

16.8 9.0 5.6 3.8 2.8

8.8 12.0 15.2 18.3 21.5

3.4 1.8 1.1 0.8 0.6

0° 20°

40°

60°

80°

Ave Lumens

Zone Lumens % Lamp 0° - 30° 0° - 40° 0° - 60° 0° - 90°

90° - 180° 0° - 180°

1152.8 1470.5 1537.5 1538.8

0.0 1538.8

74.9 95.6 99.9 100.0 0.0

*100.0 *Efficiency

%02fp pc 80% 70% 50% pw 50% 30% 10% 50% 30% 10% 50% 30% 10%

R C

R

50% beam - 54.6°

10% beam - 76.2°

Mounting Height

Inital FC Center Beam Diameter FC Diameter FC

8.0 10.0 12.0 14.0 16.0

48.8 26.2 16.4 11.2 8.1

5.7 7.7 9.8 11.9 13.9

24.4 13.1 8.2 5.6 4.1

8.6 11.8 14.9 18.0 21.2

4.9 2.6 1.6 1.1 0.8

HAFB B1 A1

Catalog Number:

EVO 35/14 6AR WD LS MVOLT

Notes:

Type:

DL1

JRC15-48426

GOTHAM ARCHITECTURAL DOWNLIGHTING | 1400 Lester Road Conyers GA 30012 | P 800.315.4982 | gothamlighting.com

© 2010-2014 Acuity Brands Lighting, Inc. All Rights Reserved. Rev. 12/09/14. Specifications subject to change without notice. PAGE 4 OF 4

EVO-6-OPEN

CON

TROLS

6” EVO

Downlight Solid-State Lighting

Choose Wall Controls.

nLIGHT o�ers multiple styles of wall controls – each with varying features and user experience.

Push-Button WallPod Traditional tactile buttons and LED user feedback

Touch WallPod Contemporary capacitive touch style buttons with audible clicker for user feedback

Graphic WallPod Full color touch screen provides a sophisticated look and feel

A

A

B

B

A nPS 80 EZ nCM PDT 9 nCM ADCX nPS 80 EZ

EXAMPLE

Group Fixture Control* *Application diagram applies for �xtures with eldoLED drivers only.

nPS 80 EZ Dimming/Control Pack (qty 2 required) nPODM 2P DX Dual On/O�/Dim Push-Button WallPod nCM ADCX Daylight Sensor with Automatic Dimming Control nCM PDT 9 Dual Technology Occupancy Sensor

Description: This design provides a dual on/o�/dim wall station that enables manual control of the �xtures in Row A and Row B separately.

Additionally, a daylight harvesting sensor is provided so the lights in row B can be con�gured to dim automatically when daylight is available. An occupancy sensor turns o� all lights when the space is vacant.

nPODM 2P DX

B

C

C

A

OPTIONAL

WIRING KEY

BA C

CAT-5e Cable Line Power Low Voltage Dimming Wires

HAFB B1 A1

Catalog Number:

EVO 35/14 6AR WD LS MVOLT EL

Notes:

Type:

DLE

JRC15-48426

Luminaire Type:

Catalog Number (autopopulated):

GOTHAM ARCHITECTURAL DOWNLIGHTING | 1400 Lester Road Conyers GA 30012 | P 800.315.4982 | gothamlighting.com

© 2010-2014 Acuity Brands Lighting, Inc. All Rights Reserved. Rev. 12/09/14. Specifications subject to change without notice.PAGE 1 OF 4

EVO-6-OPEN

Gotham Architectural Downlighting LED Downlights

6” Evo®

Downlight

Solid-State Lighting

OPTICAL SYSTEM

MECHANICAL SYSTEM

4” vertical adjustment

ELECTRICAL SYSTEM

LISTINGS

• Fixtures are CSA certified to meet US and Canadian standards; wet location, covered ceiling

WARRANTY

• 5-year limited warranty. Complete warranty terms located at:

www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx

EXAMPLE: EVO 35/10 6AR 120 AZ10

Series Color temperature Nominal lumen values Aperture/Trim color Distribution Finish Voltage

EVO 27/ 2700 K

30/ 3000 K 35/ 3500 K 41/ 4100 K

10 1000 lumens 14 1400 lumens 18 1800 lumens 22 2200 lumens

6AR Clear 6PR Pewter 6WTR Wheat 6GR Gold 6WR1 White 6BR1 Black

(blank) 1.0 s/mh VND Very narrow (0.5 s/mh) ND Narrow (0.6 s/mh) MD Medium (0.8 s/mh) WD Wide (1.2 s/mh)

(blank) Semi-specular LD Matte diffuse LS Specular

MVOLT

Driver Options

AZ103 Philips Xitanium 0-10V dimming driver. Minimum dimming level 10%

EZB eldoLED SOLOdrive 0-10V dimming driver. Mini-mum dimming level <1%. 120V or 277V

EDAB eldoLED SOLOdrive DALI dimming driver. Minimum dimming level <1%. 120V or 277V

EDXB eldoLED POWERdrive DMX with RDM (remote device management). Minimum dimming level <1%.

Includes termination resistor. 120V or 277V

ECOS23,4,5 Lutron® Hi-Lume® 2-wire forward-phase dimming driver. Minimum dimming level 1%

ECOS33,4 Lutron® Hi-Lume® 3-wire or EcoSystem® dimming driver. Minimum dimming level 1%

SF Single fuse NPP16D nLight® network relay pack with 0-10V dimming. Refer to TN-602.

NPP16D ER6 nLight® network relay pack with 0-10V dimming for emergency circuit operation.

Refer to TN-602.

NPS80EZ nLight® dimming pack controls 0-10V eldoLED drivers.

NPS80EZ ER6 nLight® dimming pack controls 0-10V eldoLED drivers. ER controls fixtures on emergency circuit.

TRW7 White painted flange

TRBL8 Black painted flange EL9 Emergency battery pack with integral test switch ELR9 Emergency battery pack with remote test switch CRI90 High CRI (90+) CP10 Chicago plenum BGTD Bodine generator transfer device RRL__ RELOC®-ready luminaire connectors enable a simple and consistent factory installed op-tion across all ABL luminaire brands. Refer to RRL for complete nomenclature.

ACCESSORIES order as separate catalog numbers (shipped separately)

SCA6 Sloped ceiling adapter. Degree of slope must be specified (10D, 15D, 20D, 25D, 30D). Ex: SCA6 10D. Refer to TECH-190.

CTA4-8 YK Ceiling thickness adapter (extends mounting frame to accommodate ceiling thickness up to 2”).

GVRT Vandal-resistant trim accessory. Refer to TECH-200.

ISD BC 0-10V wallbox dimmer. Refer to ISD-BC.

FEATU

RES

ORDERIN

G IN

FORM

ATION

HAFB B1 A1

Catalog Number:

EVO 35/14 6AR WD LS MVOLT EL

Notes:

Type:

DLE

JRC15-48426

GOTHAM ARCHITECTURAL DOWNLIGHTING | 1400 Lester Road Conyers GA 30012 | P 800.315.4982 | gothamlighting.com

© 2010-2014 Acuity Brands Lighting, Inc. All Rights Reserved. Rev. 12/09/14. Specifications subject to change without notice. PAGE 2 OF 4

EVO-6-OPEN

6” EVO

Downlight Solid-State Lighting

PH

OTOM

ETRY

All dimensions are inches (centimeters) unless otherwise noted.

7 9 16 [19.1]

Aperture: 6-1/4 (15.9) Ceiling Opening: 7-1/8 (18.1) Overlap Trim: 7-1/2 (19.1)

15 7 8 [40.3]

15 1 16 [38.3]

ORDERING NOTES

1. Not available with finishes.

2. Not valid with emergency options, i.e., EL and ELR.

3. Refer to TECH-240 for compatible dimmers.

4. Not available with nLight® option.

5. 120V only.

6. For use with generator supply EM power. Will require an emergency hot feed and normal hot feed.

7. Not available with white reflector.

8. Not available with black reflector

9. For dimensional changes, refer to TECH-140. Not available with

CP option. Specify 120V or 277V. Not available with 347V.

10. Not available with EL or ELR options.

DIM

EN

SION

AL DATA

ELECTRICAL

N

OTES

WATTAGE CONSUMPTION MATRIX

LUMENS WATTAGE LUMENS per WATT

1000 18 61

1400 25 63

1800 28 66

2000 32 67 nLight® Control Accessories:

Order as separate catalog number. Visit www.sensorswitch.com/nLight for complete listing of nLight controls.

WallPod stations Model number Occupancy sensors Model number On/Off nPODM [color] Small motion 360°, ceiling (PIR / dual tech) nCM 9 / nCM PDT 9 On/Off & Raise/Lower nPODM DX [color] Large motion 360°, ceiling (PIR / dual tech) nCM 10 / nCM PDT 10 Graphic Touchscreen nPOD GFX [color] Wide view (PIR / dual tech) nWV 16 / nWV PDT 16 Photocell controls Model number Wall Switch w/ Raise/Lower (PIR / dual tech) nWSX LV DX / nWSX PDT LV DX On/Off & Dimming nCM ADCX Cat-5 cables (plenum rated) Model number

10', CAT5 10FT CAT5 10FT J1

15', CAT5 15FT CAT5 15FT J1AVAILABILITY/COMPATIBILITY -- INITIAL LUMENS

LED INITIAL LUMENS

PRODUCT LUMENS WATTS EL/ELR ELRHL

EVO 6" 1000 22 405 N/A

EVO 6" 1400 30 736 N/A

EVO 6" 1800 38 821 N/A

EVO 6" 2200 32 1078 N/A

HAFB B1 A1

Catalog Number:

EVO 35/14 6AR WD LS MVOLT EL

Notes:

Type:

DLE

JRC15-48426

GOTHAM ARCHITECTURAL DOWNLIGHTING | 1400 Lester Road Conyers GA 30012 | P 800.315.4982 | gothamlighting.com

© 2010-2014 Acuity Brands Lighting, Inc. All Rights Reserved. Rev. 12/09/14. Specifications subject to change without notice.PAGE 3 OF 4

EVO-6-OPEN

EVO 35/18 6AR LS INPUT WATTS: 28.1, DELIVERED LUMENS: 1858.1, LM/W=66.1, 1.1 S/MH, TEST NO. LTL20947

PH

OTOM

ETRY

Distribution Curve Distribution Data Output Data Coefficient of Utilization Illuminance: Single Luminaire 30” Above Floor

6” EVO

Downlight

Solid-State Lighting

PHOTOMETRY NOTES

0° 20°

40°

60°

80°

Ave Lumens

Zone Lumens % Lamp 0° - 30° 0° - 40° 0° - 60° 0° - 90°

90° - 180° 0° - 180°

1374.7 1772.2 1856.8 1858.1

0.0 1858.1

74.0 95.4 99.9 100.0 0.0

*100.0 *Efficiency

%02fp pc 80% 70% 50% pw 50% 30% 10% 50% 30% 10% 50% 30% 10%

R C

R

50% beam - 55.6°

10% beam - 77.0°

Mounting Height

Inital FC Center Beam Diameter FC Diameter FC

8.0 10.0 12.0 14.0 16.0

57.1 30.7 19.1 13.1 9.5

5.8 7.9 10.0 12.1 14.2

28.6 15.4 9.6 6.5 4.7

8.7 11.9 15.1 18.3 21.5

5.7 3.1 1.9 1.3 0.9

EVO 35/10 6AR LS INPUT WATTS: 18.4, DELIVERED LUMENS: 1113.4, LM/W=60.5, 1.1 S/MH, TEST NO. LTL21133

EVO 35/14 6AR LS INPUT WATTS: 24.6, DELIVERED LUMENS: 1538.8, LM/W=62.6, 1.0 S/MH, TEST NO. LTL21127

0° 20°

40°

60°

80°

Ave Lumens

Zone Lumens % Lamp 0° - 30° 0° - 40° 0° - 60° 0° - 90°

90° - 180° 0° - 180°

822.0 1062.1 1112.7 1113.4

0.0 1113.4

73.8 95.4 99.9 100.0 0.0

*100.0 *Efficiency

%02fp pc 80% 70% 50% pw 50% 30% 10% 50% 30% 10% 50% 30% 10%

R C

R

50% beam - 56.3°

10% beam - 77.2°

Mounting Height

Inital FC Center Beam Diameter FC Diameter FC

8.0 10.0 12.0 14.0 16.0

33.6 18.1 11.3 7.7 5.6

5.9 8.0 10.2 12.3 14.4

16.8 9.0 5.6 3.8 2.8

8.8 12.0 15.2 18.3 21.5

3.4 1.8 1.1 0.8 0.6

0° 20°

40°

60°

80°

Ave Lumens

Zone Lumens % Lamp 0° - 30° 0° - 40° 0° - 60° 0° - 90°

90° - 180° 0° - 180°

1152.8 1470.5 1537.5 1538.8

0.0 1538.8

74.9 95.6 99.9 100.0 0.0

*100.0 *Efficiency

%02fp pc 80% 70% 50% pw 50% 30% 10% 50% 30% 10% 50% 30% 10%

R C

R

50% beam - 54.6°

10% beam - 76.2°

Mounting Height

Inital FC Center Beam Diameter FC Diameter FC

8.0 10.0 12.0 14.0 16.0

48.8 26.2 16.4 11.2 8.1

5.7 7.7 9.8 11.9 13.9

24.4 13.1 8.2 5.6 4.1

8.6 11.8 14.9 18.0 21.2

4.9 2.6 1.6 1.1 0.8

HAFB B1 A1

Catalog Number:

EVO 35/14 6AR WD LS MVOLT EL

Notes:

Type:

DLE

JRC15-48426

GOTHAM ARCHITECTURAL DOWNLIGHTING | 1400 Lester Road Conyers GA 30012 | P 800.315.4982 | gothamlighting.com

© 2010-2014 Acuity Brands Lighting, Inc. All Rights Reserved. Rev. 12/09/14. Specifications subject to change without notice. PAGE 4 OF 4

EVO-6-OPEN

CON

TROLS

6” EVO

Downlight Solid-State Lighting

Choose Wall Controls.

nLIGHT o�ers multiple styles of wall controls – each with varying features and user experience.

Push-Button WallPod Traditional tactile buttons and LED user feedback

Touch WallPod Contemporary capacitive touch style buttons with audible clicker for user feedback

Graphic WallPod Full color touch screen provides a sophisticated look and feel

A

A

B

B

A nPS 80 EZ nCM PDT 9 nCM ADCX nPS 80 EZ

EXAMPLE

Group Fixture Control* *Application diagram applies for �xtures with eldoLED drivers only.

nPS 80 EZ Dimming/Control Pack (qty 2 required) nPODM 2P DX Dual On/O�/Dim Push-Button WallPod nCM ADCX Daylight Sensor with Automatic Dimming Control nCM PDT 9 Dual Technology Occupancy Sensor

Description: This design provides a dual on/o�/dim wall station that enables manual control of the �xtures in Row A and Row B separately.

Additionally, a daylight harvesting sensor is provided so the lights in row B can be con�gured to dim automatically when daylight is available. An occupancy sensor turns o� all lights when the space is vacant.

nPODM 2P DX

B

C

C

A

OPTIONAL

WIRING KEY

BA C

CAT-5e Cable Line Power Low Voltage Dimming Wires

HAFB B1 A1

Catalog Number:

LQM S W 3 R 120/277 EL N SD

Notes:

Type:

EX1

JRC15-48426

EMERGENCY LQM-EL-N

Catalog Number

Notes

Type

ORDERING INFORMATION Example: LQM S W 3 R 120/277 EL N

LQM 3 120/277 EL N

Family Face type Housing color Number of faces Letter color Input voltage2 Emergency operation Options

LQM S Stencil P Panel1

(blank) Black W White

3 Single face with extra faceplate and color panel

R Red G Green

120/277 Dual voltage

EL N Nickel cadmium battery

(blank) None NOM NOM certified for Mexico3

SD Self-diagnostics SDFIFA Self-diagnostics, fire alarm flashing interface and flashing emergency operation and intermittent audible alarm (one flash/one second)

7-5/8 (19.3)

11-3/4 (29.8)

(5.1)All dimensions are inches (centimeters) unless otherwise specified.

Specifications

Length: 11-3/4 (29.8)

Depth: 2 (5.1)

Height: 7-5/8 (19.3)

Weight: 2.6 lbs (1.2 kgs)

Accessories: Order as separate item.

ELA WG1 Back-mount wireguard4

ELA WGEXT Top-mount wireguard4

ELA WGEXE End-mount wireguard4

ELA LQMUS12 12” stem kit5

FEATURES & SPECIFICATIONS

INTENDED USE — Ideal for applications requiring attractive, quick-installation exit signs and low energy consumption.

CONSTRUCTION — Engineering-grade thermoplastic housing is impact-resistant, scratch-resistant, and corro-sion-proof. UL94V-0 flame rating. UV-stable resin resists discoloration from natural and man-made light sources.

Rugged unibody housing snaps together with no additional mechanical fasteners. Faceplate and back cover are inter-changeable on housing. Positive snap-fit tabs hold faceplate securely, yet easily removable for lamp compartment access.

Universal directional Chevron inserts are easily removed and reinserted. Uniform illumination without shadows or hot spots. Reinforced, impact-resistant color panels. Letters 6” high with 3/4” stroke, with 100

ft. viewing distance rating, based upon UL924 standards.

U.S. Patent No. 5,526,251; 5,611,163; 5,739,639; 5,954,423; D495,751 and 6,502,044. Other patents pending.

OPTICS — LEDs mounted on printed circuit boards. Low energy consumption – less than one watt. LED lamp operates in normal (AC input) and emergency (DC input) modes.

The typical life of the exit LED lamp is 10 years.

ELECTRICAL — Low-voltage disconnect prevents excessively deep discharge that can permanently damage battery. Conveniently located test switch and LED provide visual and manual means of monitoring system.

Constant-current series charger minimizes energy consumption and provides low operating costs. Printed circuit boards are 100% quality tested during manufacturing. Current-limiting charger circuitry protects printed circuit boards from shorts.

AC/LV reset (line latch) allows battery connection before AC power is applied and aids in preventing battery damage from deep discharge.

Crystal oscillator timing system with watchdog protection for precision accuracy.

Brownout protection is automatically switched to emergency mode when supply voltage drops below 80% of nominal.

Battery: Sealed, maintenance-free nickel-cadmium battery delivers 90-minutes capacity to emergency lamps.

Two-state constant-current charge maximizes battery life and automatically recharges after battery discharge.

Diagnostics: Single-point microcomputer control for all electronic features.

Single multi-chromatic LED indicator to display two-state charging, test activation and three-state diag-nostic status.

Test switch provides manual activation of 30-second diagnostic testing for on-demand visual inspection.

Self-diagnostic testing for five minutes every 30 days and 30 minutes every six months.

Diagnostic evaluation of LED light source, AC to DC transfer, charging and battery condition. Continuously monitors AC functionality.

INSTALLATION — Universal (top-, end-, or back-) mounting. Easily removed mounting knockouts. J-box pattern on back panel. Housing snaps to canopy with four positive-locking tabs. Cam-locking pin tightly secures housing to canopy.

LISTINGS — UL damp location listed 50o-104oF (10o-40oC) standard. Meets UL924, NFPA 101 (current Life Safety Code), NEC and OSHA illumination standards. NEMA Premium certified.

WARRANTY — 5-year limited warranty. Complete warranty terms located at www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx Actual performance may differ as a result of end-user environment and application.

Note: Specifications subject to change without notice.

Notes 1 Only available in custom signage. See spec sheet, Custom-Signage.

2 Some special voltages available. Consult factory.

3 Available with stencil or panel faces in white housing, red letters only.

4 See spec sheet ELA-WG.

5 See spec sheet ELA-Stemkits.

Thermoplastic Exits

LQM EL N

LED LAMPS

Emergency Operation Nickel-Cadmium Battery

For shortest lead times, configure product using standard options (shown in bold)..

HAFB B1 A1

Catalog Number:

LQM S W 3 R 120/277 EL N SD

Notes:

Type:

EX1

JRC15-48426

LQM-EL-N

EMERGENCY: One Lithonia Way Conyers, GA 30012 Phone: 800.334.8694 Fax: 770.981.8141 www.lithonia.com ©1993-2013 Acuity Brands Lighting, Inc. All rights reserved. Rev. 02/26/13

LQM EL N Emergency LED, Quantum®

MOUNTING

All dimensions are inches (centimeters) unless otherwise specified.

Shipping weight: 2.6 lbs. (1.2 kgs.)

SPECIFICATIONS

5-5/8 (14.7)

7-5/8 (19.3)

7-5/8 (19.3)

3-7/8 (9.6)

8-3/8 (21.3)

11-3/4 (29.8)

11-3/4 (29.8)

5-7/8 (14.9)

4-1/2 (11.4)

(5.1)

Top Mounting

End Mounting

Back Mounting

ELECTRICAL

Primary Circuit

Type1 Typical

LED life2 Supply voltage

Input watts

Max.

amps

Red LED 10 years 120 .71 .05 277 .92 .06

Green LED 10 years 120 .66 .05 277 .70 .06

BATTERY

Nickel Cadmium

Voltage Shelf life3

Typical life3 Maintenance4

Optimum temperature5

1.2 3 years 7-9 years none 10°C - 40°C

Notes 1 LED lamps operate in normal (AC input) and emergency (DC input) modes.

2 Based on continuous operation. The typical life of the exit LED lamp is 10 years.

3 At 77°F (25°C).

4 All life safety equipment, including emergency lighting for path of egress must be maintained, serviced and tested in accordance with all National Fire Protection Association (NFPA) and local codes. Failure to perform the required maintenance, service, or testing could jeopardize the safety of occupants and will void all warranties.

5 Optimum ambient temperature range where unit will provide capacity for 90 minutes. Higher and lower tempera-tures affect life and capacity. Consult factory for detailed information.

HAFB B1 A1

Catalog Number:

2AV G 254T5HO MDR MVOLT 2

GEB115

Notes: T5HO requires two ballasts for inboard outboard switching

Type:

GB1

JRC15-48426

Catalog Number

Notes Type

2AV 2'x4' Linear Fluorescent

T5 or T5HO 1, 2 or 3 lamps

FEATURES & SPECIFICATIONS

INTENDED USE — The Avante 2x4 is a general lighting luminaire for large spaces including open offices, circulation areas, classrooms, libraries, cafeterias, airport ticketing and waiting areas, and numerous other commercial applications. Static or air functions available. Certain airborne contaminants can diminish integrity of acrylic. Click here for Acrylic Environmental Compatibility table for suitable uses.

CONSTRUCTION — Housing is gloss white enamel on cold rolled steel. All edges hemmed or rounded.

All shieldings pivot on light traps and swing down for easy lamp access.

Molded light traps prevent light leaks between shielding and endplates.

All air and screw slot units supplied with screw-on tee bar clips. Ballast access is from below.

OPTICS — Twin matte white polyester powder paint finished reflectors provide uniform light distribution. Optional low brightness diffuse aluminum stepped reflectors available.

All diffusers control direct light distribution and glare by shielding lamps from direct view.

Metal diffuser staggered round holes (MDR) 52% open perforated metal with .075" diameter holes backed with white acrylic diffuser.

Straight blade louver (SBL) sides of perforated metal with staggered round holes and solid blade louvered center. Sides and louver backed with white acrylic diffuser.

Metal diffuser aligned mini slots (MDM) 46% open perforated metal backed with white acrylic diffuser.

Acrylic diffuser prismatic lens (ADP) extruded acrylic lens backed with white acrylic diffuser.

Metal diffuser with center slots (MDC). 52% open metal, .075" diameter holes with 1" wide solid center. With 1/2"x2" open slots. Diffuser is backed with white acrylic overlay.

ELECTRICAL — All ballasts supplied are class P, thermally protected, resetting, HPF, non-PCB, UL Listed, CSA Certified. Ballasts are sound rated A. Standard combinations conform to UL 935. All T5 and T5HO ballasts are program start.

Step-level dimming option allows system to be switched to 50% power for compliance with common energy codes while maintaining fixture appearance.

The F28T5 two-lamp configuration is available with SIMPLY5™ lighting intelligence. S5 option available for use with Simply5 lighting intelligence system. See 2AV-2x4-T5_S5 or Lithonia Controls specification sheets for more information.

INSTALLATION — Trims available for standard 1" and 9/16" tee bar or screw slot grids.

Fixtures can be row mounted end-to-end.

Drywall ceiling adapters available.

LISTINGS — UL Listed to US and Canadian safety standards. Chicago Plenum ap-proved and NYC approved (see Options).

Avante is covered by one or more of the following patents: 5,988,829; 399,586; 411,641;

413,402; 2,212,513; 87,513.

Sheet #: 2AV 2X4 T5 ARCH-285Fluorescent

NOTES:

1 Refer to options and accessories section for more detailed information.

2 MVOLT (120 - 277 volt).

3 For two-lamp 28T5 only.

4 SIMPLY5 system includes 13' S5SSC RELOC® wiring system. Specify voltage unless HW (hardwire) or PWS1836 is ordered.

5 Must specify voltage, 120 or 277.

WARRANTY — 1-year limited warranty. Complete warranty terms located at www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx NOTE: Specifications are subject to change without notice.

Lamp type

28T5 28W T5 (46")

54T5HO 54W T5HO (46")

Series

2AV 2' wide

2AV

Trim type

G Grid trim ST Screw slot

Number of lamps

Not included.

Diffuser

MDR Metal diffuser, round holes

SBL Straight blade louver, round holes

MDM Metal diffuser, mini slots ADP Acrylic diffuser, linear prismatic lens MDC Metal diffuser, round holes with large center slots1

Others available.

Voltage

MVOLT2

Others avail-able.

Air function

(blank) Static (no air function) A Air return/supply

Options

GEB10PS Electronic ballast, < 10% THD, program start

GEB115 1.15 ballast factor, two-lamp only3

GEB115S 1.15 ballast factor, step-dim3

S5 0.95 ballast factor, SIMPLY5 system4

ALG Acrylic litter guard1

EL14 Emergency battery pack (nominal 1400 lumens, see Life Safety section)

HW Hardwire for SIMPLY5TM system; replaces

RELOC®

GLR Internal fast-blow fuse5

LP_ Lamped. Specify lamp type and color PWS1836 6' prewire, 3/8" dia., 18-gauge, 3 wires QFC Quick-Flex® cable5

NY3 New York City approved CP Chicago Plenum approved APB Air pattern control blades1

Reflector option ASR Aluminum stepped reflector

For shortest lead times, configure product using standard options (shown in bold).

Example: 2AV G 2 28T5 MDR MVOLT GEB115

ORDERING INFORMATION

Specifications Length: 48 (121.9) Width: 24 (61.0) Diffuser width: 8 (20.3) Depth: 5-1/2 (14.0) 5-7/8 (14.9) for air fixture

All dimensions are inches (centimeters) unless otherwise indicated.

Accessories Order as separate catalog number.

DGA24 Drywall ceiling adapter, unit installation. Use G trim plus DGA accessory for fixture trim flange and fixture support in plaster or plasterboard ceilings.

HAFB B1 A1

Catalog Number:

2AV G 254T5HO MDR MVOLT 2

GEB115

Notes: T5HO requires two ballasts for inboard outboard switching

Type:

GB1

JRC15-48426

Lithonia Lighting Fluorescent One Lithonia Way, Conyers, GA 30012 Phone: 800-858-7763 Fax: 770-929-8789 www.lithonia.com

10˚ 30˚

50˚

70˚

90˚

0˚0˚0˚ 90˚

Coefficients of Utilization pf 20% pc 80% 70% 50% pw 70%50%30% 50%30%10% 50%30%10%

R C

R

Zonal Lumen Summary Zone Lumens % Lamp % Fixture 0˚ - 30˚ 0˚ - 40˚ 0˚ - 60˚ 0˚ - 90˚ 90˚ - 180˚ 0˚ - 180˚

19.4 32.1 57.7 73.7 0.0 73.7

26.3 43.5 78.3

100.0 0.0

100.0

Efficiency: 73.7%

CP Summary 0˚ 90

0˚ 5˚ 15˚ 25˚ 35˚ 45˚ 55˚ 65˚ 75˚ 85˚

10˚ 30˚

50˚

70˚

90˚

0˚0˚0˚ 90˚

Coefficients of Utilization pf 20% pc 80% 70% 50% pw 70%50%30% 50%30%10% 50%30%10%

R C

R

Zonal Lumen Summary Zone Lumens % Lamp % Fixture 0˚ - 30˚ 0˚ - 40˚ 0˚ - 60˚ 0˚ - 90˚ 90˚ - 180˚ 0˚ - 180˚

20.6 34.1 61.5 78.5 0.0 78.5

26.3 43.5 78.3

100.0 0.0

100.0

Efficiency: 78.5%

CP Summary 0˚ 90

0˚ 5˚ 15˚ 25˚ 35˚ 45˚ 55˚ 65˚ 75˚ 85˚

Sheet #: 2AV 2X4 T5 © 2007-2012 Acuity Brands Lighting, Inc. All rights reserved. Rev. 03/23/12

2AV 2x4 Direct/Indirect Lighting

2AV G 2 54T5HO MDR, (2) 54W T5HO lamps, 4450 lumens per lamp, s/m 1.3 (along) 1.3 (across), test no. LTL 10196

2AV G 3 54T5HO MDR, (3) 54W T5HO lamps, 4450 lumens per lamp, s/m 1.3 (along) 1.3 (across), test no. LTL 10197

0° 20°

40°

60°

80°

90°

0°0°0° 90°

180°

Coefficients of Utilization pf 20% pc 80% 70% 50% pw 70%50%30% 50%30%10% 50%30%10%

R C

R

Zonal Lumen Summary Zone Lumens % Lamp % Fixture 0° - 30° 0° - 40° 0° - 60° 0° - 90° 90° - 180° 0° - 180°

20.0 33.1 59.6 76.5 0.0 76.5

26.1 43.2 77.9

100.0 0.0

100.0

Efficiency: 76.5%

CP Summary 0° 90

0° 5° 15° 25° 35° 45° 55° 65° 75° 85°

2AV G 2 28T5 MDR, (2) 28W T5 lamps, 2600 lumens per lamp, test no. LTL 8780

MOUNTING DATA

*DGA accessory available to provide ceiling trim flange and fixture support for plaster or plasterboard ceiling. Recommended rough-in dimensions for DGA installation is 24-3/4" x 48-3/4" (Tolerance is +1/8", -0”).

Appropriate Ceiling Type Trim Type Exposed grid tee (1' and 9/16") G Concealed grid tee G Screw slot ST Plaster or plasterboard G*

STAGASTG

Screw Slot (screw slot tee)Lay-in trim (exposed grid teeLay-in trim (exposed grid tee Screw slot trim (screw slot tee))

HAFB B1 A1

Catalog Number:

2AV G 254T5HO MDR MVOLT 2

GEB115 EL14

Notes: T5HO requires two ballasts for inboard outboard switching

Type:

GB1E

JRC15-48426

Catalog Number

Notes Type

2AV 2'x4' Linear Fluorescent

T5 or T5HO 1, 2 or 3 lamps

FEATURES & SPECIFICATIONS

INTENDED USE — The Avante 2x4 is a general lighting luminaire for large spaces including open offices, circulation areas, classrooms, libraries, cafeterias, airport ticketing and waiting areas, and numerous other commercial applications. Static or air functions available. Certain airborne contaminants can diminish integrity of acrylic. Click here for Acrylic Environmental Compatibility table for suitable uses.

CONSTRUCTION — Housing is gloss white enamel on cold rolled steel. All edges hemmed or rounded.

All shieldings pivot on light traps and swing down for easy lamp access.

Molded light traps prevent light leaks between shielding and endplates.

All air and screw slot units supplied with screw-on tee bar clips. Ballast access is from below.

OPTICS — Twin matte white polyester powder paint finished reflectors provide uniform light distribution. Optional low brightness diffuse aluminum stepped reflectors available.

All diffusers control direct light distribution and glare by shielding lamps from direct view.

Metal diffuser staggered round holes (MDR) 52% open perforated metal with .075" diameter holes backed with white acrylic diffuser.

Straight blade louver (SBL) sides of perforated metal with staggered round holes and solid blade louvered center. Sides and louver backed with white acrylic diffuser.

Metal diffuser aligned mini slots (MDM) 46% open perforated metal backed with white acrylic diffuser.

Acrylic diffuser prismatic lens (ADP) extruded acrylic lens backed with white acrylic diffuser.

Metal diffuser with center slots (MDC). 52% open metal, .075" diameter holes with 1" wide solid center. With 1/2"x2" open slots. Diffuser is backed with white acrylic overlay.

ELECTRICAL — All ballasts supplied are class P, thermally protected, resetting, HPF, non-PCB, UL Listed, CSA Certified. Ballasts are sound rated A. Standard combinations conform to UL 935. All T5 and T5HO ballasts are program start.

Step-level dimming option allows system to be switched to 50% power for compliance with common energy codes while maintaining fixture appearance.

The F28T5 two-lamp configuration is available with SIMPLY5™ lighting intelligence. S5 option available for use with Simply5 lighting intelligence system. See 2AV-2x4-T5_S5 or Lithonia Controls specification sheets for more information.

INSTALLATION — Trims available for standard 1" and 9/16" tee bar or screw slot grids.

Fixtures can be row mounted end-to-end.

Drywall ceiling adapters available.

LISTINGS — UL Listed to US and Canadian safety standards. Chicago Plenum ap-proved and NYC approved (see Options).

Avante is covered by one or more of the following patents: 5,988,829; 399,586; 411,641;

413,402; 2,212,513; 87,513.

Sheet #: 2AV 2X4 T5 ARCH-285Fluorescent

NOTES:

1 Refer to options and accessories section for more detailed information.

2 MVOLT (120 - 277 volt).

3 For two-lamp 28T5 only.

4 SIMPLY5 system includes 13' S5SSC RELOC® wiring system. Specify voltage unless HW (hardwire) or PWS1836 is ordered.

5 Must specify voltage, 120 or 277.

WARRANTY — 1-year limited warranty. Complete warranty terms located at www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx NOTE: Specifications are subject to change without notice.

Lamp type

28T5 28W T5 (46")

54T5HO 54W T5HO (46")

Series

2AV 2' wide

2AV

Trim type

G Grid trim ST Screw slot

Number of lamps

Not included.

Diffuser

MDR Metal diffuser, round holes

SBL Straight blade louver, round holes

MDM Metal diffuser, mini slots ADP Acrylic diffuser, linear prismatic lens MDC Metal diffuser, round holes with large center slots1

Others available.

Voltage

MVOLT2

Others avail-able.

Air function

(blank) Static (no air function) A Air return/supply

Options

GEB10PS Electronic ballast, < 10% THD, program start

GEB115 1.15 ballast factor, two-lamp only3

GEB115S 1.15 ballast factor, step-dim3

S5 0.95 ballast factor, SIMPLY5 system4

ALG Acrylic litter guard1

EL14 Emergency battery pack (nominal 1400 lumens, see Life Safety section)

HW Hardwire for SIMPLY5TM system; replaces

RELOC®

GLR Internal fast-blow fuse5

LP_ Lamped. Specify lamp type and color PWS1836 6' prewire, 3/8" dia., 18-gauge, 3 wires QFC Quick-Flex® cable5

NY3 New York City approved CP Chicago Plenum approved APB Air pattern control blades1

Reflector option ASR Aluminum stepped reflector

For shortest lead times, configure product using standard options (shown in bold).

Example: 2AV G 2 28T5 MDR MVOLT GEB115

ORDERING INFORMATION

Specifications Length: 48 (121.9) Width: 24 (61.0) Diffuser width: 8 (20.3) Depth: 5-1/2 (14.0) 5-7/8 (14.9) for air fixture

All dimensions are inches (centimeters) unless otherwise indicated.

Accessories Order as separate catalog number.

DGA24 Drywall ceiling adapter, unit installation. Use G trim

HAFB B1 A1

Catalog Number:

2AV G 254T5HO MDR MVOLT 2

GEB115 EL14

Notes: T5HO requires two ballasts for inboard outboard switching

Type:

GB1E

JRC15-48426

Lithonia Lighting Fluorescent One Lithonia Way, Conyers, GA 30012 Phone: 800-858-7763 Fax: 770-929-8789 www.lithonia.com

10˚ 30˚

50˚

70˚

90˚

0˚0˚0˚ 90˚

Coefficients of Utilization pf 20% pc 80% 70% 50% pw 70%50%30% 50%30%10% 50%30%10%

R C

R

Zonal Lumen Summary Zone Lumens % Lamp % Fixture 0˚ - 30˚ 0˚ - 40˚ 0˚ - 60˚ 0˚ - 90˚ 90˚ - 180˚ 0˚ - 180˚

19.4 32.1 57.7 73.7 0.0 73.7

26.3 43.5 78.3

100.0 0.0

100.0

Efficiency: 73.7%

CP Summary 0˚ 90

0˚ 5˚ 15˚ 25˚ 35˚ 45˚ 55˚ 65˚ 75˚ 85˚

10˚ 30˚

50˚

70˚

90˚

0˚0˚0˚ 90˚

Coefficients of Utilization pf 20% pc 80% 70% 50% pw 70%50%30% 50%30%10% 50%30%10%

R C

R

Zonal Lumen Summary Zone Lumens % Lamp % Fixture 0˚ - 30˚ 0˚ - 40˚ 0˚ - 60˚ 0˚ - 90˚ 90˚ - 180˚ 0˚ - 180˚

20.6 34.1 61.5 78.5 0.0 78.5

26.3 43.5 78.3

100.0 0.0

100.0

Efficiency: 78.5%

CP Summary 0˚ 90

0˚ 5˚ 15˚ 25˚ 35˚ 45˚ 55˚ 65˚ 75˚ 85˚

Sheet #: 2AV 2X4 T5 © 2007-2012 Acuity Brands Lighting, Inc. All rights reserved. Rev. 03/23/12

2AV 2x4 Direct/Indirect Lighting

2AV G 2 54T5HO MDR, (2) 54W T5HO lamps, 4450 lumens per lamp, s/m 1.3 (along) 1.3 (across), test no. LTL 10196

2AV G 3 54T5HO MDR, (3) 54W T5HO lamps, 4450 lumens per lamp, s/m 1.3 (along) 1.3 (across), test no. LTL 10197

0° 20°

40°

60°

80°

90°

0°0°0° 90°

180°

Coefficients of Utilization pf 20% pc 80% 70% 50% pw 70%50%30% 50%30%10% 50%30%10%

R C

R

Zonal Lumen Summary Zone Lumens % Lamp % Fixture 0° - 30° 0° - 40° 0° - 60° 0° - 90° 90° - 180° 0° - 180°

20.0 33.1 59.6 76.5 0.0 76.5

26.1 43.2 77.9

100.0 0.0

100.0

Efficiency: 76.5%

CP Summary 0° 90

0° 5° 15° 25° 35° 45° 55° 65° 75° 85°

2AV G 2 28T5 MDR, (2) 28W T5 lamps, 2600 lumens per lamp, test no. LTL 8780

MOUNTING DATA

*DGA accessory available to provide ceiling trim flange and fixture support for plaster or plasterboard ceiling. Recommended rough-in dimensions for DGA installation is 24-3/4" x 48-3/4" (Tolerance is +1/8", -0”).

Appropriate Ceiling Type Trim Type Exposed grid tee (1' and 9/16") G Concealed grid tee G Screw slot ST Plaster or plasterboard G*

Screw Slot (screw slot tee)Lay-in trim (exposed grid teeLay-in trim (exposed grid tee Screw slot trim (screw slot tee))

HAFB B1 A1

Catalog Number:

2AV G 2 28T5 MDR MVOLT

GEB115S

Notes: Step dim ballast

Type:

GB2

JRC15-48426

Catalog Number

Notes Type

2AV 2'x4' Linear Fluorescent

T5 or T5HO 1, 2 or 3 lamps

FEATURES & SPECIFICATIONS

INTENDED USE — The Avante 2x4 is a general lighting luminaire for large spaces including open offices, circulation areas, classrooms, libraries, cafeterias, airport ticketing and waiting areas, and numerous other commercial applications. Static or air functions available. Certain airborne contaminants can diminish integrity of acrylic. Click here for Acrylic Environmental Compatibility table for suitable uses.

CONSTRUCTION — Housing is gloss white enamel on cold rolled steel. All edges hemmed or rounded.

All shieldings pivot on light traps and swing down for easy lamp access.

Molded light traps prevent light leaks between shielding and endplates.

All air and screw slot units supplied with screw-on tee bar clips. Ballast access is from below.

OPTICS — Twin matte white polyester powder paint finished reflectors provide uniform light distribution. Optional low brightness diffuse aluminum stepped reflectors available.

All diffusers control direct light distribution and glare by shielding lamps from direct view.

Metal diffuser staggered round holes (MDR) 52% open perforated metal with .075" diameter holes backed with white acrylic diffuser.

Straight blade louver (SBL) sides of perforated metal with staggered round holes and solid blade louvered center. Sides and louver backed with white acrylic diffuser.

Metal diffuser aligned mini slots (MDM) 46% open perforated metal backed with white acrylic diffuser.

Acrylic diffuser prismatic lens (ADP) extruded acrylic lens backed with white acrylic diffuser.

Metal diffuser with center slots (MDC). 52% open metal, .075" diameter holes with 1" wide solid center. With 1/2"x2" open slots. Diffuser is backed with white acrylic overlay.

ELECTRICAL — All ballasts supplied are class P, thermally protected, resetting, HPF, non-PCB, UL Listed, CSA Certified. Ballasts are sound rated A. Standard combinations conform to UL 935. All T5 and T5HO ballasts are program start.

Step-level dimming option allows system to be switched to 50% power for compliance with common energy codes while maintaining fixture appearance.

The F28T5 two-lamp configuration is available with SIMPLY5™ lighting intelligence. S5 option available for use with Simply5 lighting intelligence system. See 2AV-2x4-T5_S5 or Lithonia Controls specification sheets for more information.

INSTALLATION — Trims available for standard 1" and 9/16" tee bar or screw slot grids.

Fixtures can be row mounted end-to-end.

Drywall ceiling adapters available.

LISTINGS — UL Listed to US and Canadian safety standards. Chicago Plenum ap-proved and NYC approved (see Options).

Avante is covered by one or more of the following patents: 5,988,829; 399,586; 411,641;

413,402; 2,212,513; 87,513.

Sheet #: 2AV 2X4 T5 ARCH-285Fluorescent

NOTES:

1 Refer to options and accessories section for more detailed information.

2 MVOLT (120 - 277 volt).

3 For two-lamp 28T5 only.

4 SIMPLY5 system includes 13' S5SSC RELOC® wiring system. Specify voltage unless HW (hardwire) or PWS1836 is ordered.

5 Must specify voltage, 120 or 277.

WARRANTY — 1-year limited warranty. Complete warranty terms located at www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx NOTE: Specifications are subject to change without notice.

Lamp type

28T5 28W T5 (46")

54T5HO 54W T5HO (46")

Series

2AV 2' wide

2AV

Trim type

G Grid trim ST Screw slot

Number of lamps

Not included.

Diffuser

MDR Metal diffuser, round holes

SBL Straight blade louver, round holes

MDM Metal diffuser, mini slots ADP Acrylic diffuser, linear prismatic lens MDC Metal diffuser, round holes with large center slots1

Others available.

Voltage

MVOLT2

Others avail-able.

Air function

(blank) Static (no air function) A Air return/supply

Options

GEB10PS Electronic ballast, < 10% THD, program start

GEB115 1.15 ballast factor, two-lamp only3

GEB115S 1.15 ballast factor, step-dim3

S5 0.95 ballast factor, SIMPLY5 system4

ALG Acrylic litter guard1

EL14 Emergency battery pack (nominal 1400 lumens, see Life Safety section)

HW Hardwire for SIMPLY5TM system; replaces

RELOC®

GLR Internal fast-blow fuse5

LP_ Lamped. Specify lamp type and color PWS1836 6' prewire, 3/8" dia., 18-gauge, 3 wires QFC Quick-Flex® cable5

NY3 New York City approved CP Chicago Plenum approved APB Air pattern control blades1

Reflector option ASR Aluminum stepped reflector

For shortest lead times, configure product using standard options (shown in bold).

Example: 2AV G 2 28T5 MDR MVOLT GEB115

ORDERING INFORMATION

Specifications Length: 48 (121.9) Width: 24 (61.0) Diffuser width: 8 (20.3) Depth: 5-1/2 (14.0) 5-7/8 (14.9) for air fixture

All dimensions are inches (centimeters) unless otherwise indicated.

Accessories Order as separate catalog number.

DGA24 Drywall ceiling adapter, unit installation. Use G trim

HAFB B1 A1

Catalog Number:

2AV G 2 28T5 MDR MVOLT

GEB115S

Notes: Step dim ballast

Type:

GB2

JRC15-48426

Lithonia Lighting Fluorescent One Lithonia Way, Conyers, GA 30012 Phone: 800-858-7763 Fax: 770-929-8789 www.lithonia.com

10˚ 30˚

50˚

70˚

90˚

0˚0˚0˚ 90˚

Coefficients of Utilization pf 20% pc 80% 70% 50% pw 70%50%30% 50%30%10% 50%30%10%

R C

R

Zonal Lumen Summary Zone Lumens % Lamp % Fixture 0˚ - 30˚ 0˚ - 40˚ 0˚ - 60˚ 0˚ - 90˚ 90˚ - 180˚ 0˚ - 180˚

19.4 32.1 57.7 73.7 0.0 73.7

26.3 43.5 78.3

100.0 0.0

100.0

Efficiency: 73.7%

CP Summary 0˚ 90

0˚ 5˚ 15˚ 25˚ 35˚ 45˚ 55˚ 65˚ 75˚ 85˚

10˚ 30˚

50˚

70˚

90˚

0˚0˚0˚ 90˚

Coefficients of Utilization pf 20% pc 80% 70% 50% pw 70%50%30% 50%30%10% 50%30%10%

R C

R

Zonal Lumen Summary Zone Lumens % Lamp % Fixture 0˚ - 30˚ 0˚ - 40˚ 0˚ - 60˚ 0˚ - 90˚ 90˚ - 180˚ 0˚ - 180˚

20.6 34.1 61.5 78.5 0.0 78.5

26.3 43.5 78.3

100.0 0.0

100.0

Efficiency: 78.5%

CP Summary 0˚ 90

0˚ 5˚ 15˚ 25˚ 35˚ 45˚ 55˚ 65˚ 75˚ 85˚

Sheet #: 2AV 2X4 T5 © 2007-2012 Acuity Brands Lighting, Inc. All rights reserved. Rev. 03/23/12

2AV 2x4 Direct/Indirect Lighting

2AV G 2 54T5HO MDR, (2) 54W T5HO lamps, 4450 lumens per lamp, s/m 1.3 (along) 1.3 (across), test no. LTL 10196

2AV G 3 54T5HO MDR, (3) 54W T5HO lamps, 4450 lumens per lamp, s/m 1.3 (along) 1.3 (across), test no. LTL 10197

0° 20°

40°

60°

80°

90°

0°0°0° 90°

180°

Coefficients of Utilization pf 20% pc 80% 70% 50% pw 70%50%30% 50%30%10% 50%30%10%

R C

R

Zonal Lumen Summary Zone Lumens % Lamp % Fixture 0° - 30° 0° - 40° 0° - 60° 0° - 90° 90° - 180° 0° - 180°

20.0 33.1 59.6 76.5 0.0 76.5

26.1 43.2 77.9

100.0 0.0

100.0

Efficiency: 76.5%

CP Summary 0° 90

0° 5° 15° 25° 35° 45° 55° 65° 75° 85°

2AV G 2 28T5 MDR, (2) 28W T5 lamps, 2600 lumens per lamp, test no. LTL 8780

MOUNTING DATA

*DGA accessory available to provide ceiling trim flange and fixture support for plaster or plasterboard ceiling. Recommended rough-in dimensions for DGA installation is 24-3/4" x 48-3/4" (Tolerance is +1/8", -0”).

Appropriate Ceiling Type Trim Type Exposed grid tee (1' and 9/16") G Concealed grid tee G Screw slot ST Plaster or plasterboard G*

Screw Slot (screw slot tee)Lay-in trim (exposed grid teeLay-in trim (exposed grid tee Screw slot trim (screw slot tee))

HAFB B1 A1

Catalog Number:

2AV G 2 28T5…