Item_Description.pdf

ITEM DESCRIPTION FOR

STRUCTURAL STEEL AND METAL STUDS

ITEMS

1. 127ea. SSMA 600T200-68 14ga, 50ksi 6" Wide Metal Top & Bottom Runner 20' Long (SSMA -

STEEL STUD MFG. ASSOCIATION).

2. 310ea. SSMA 600S200-54 16ga, 50ksi 6" Wide Metal Stud with 2" Flange 18' 6" Long.

3. 16ea. SSMA 600S200-54 16ga, 50ksi 6" Wide Metal Stud with 2" Flange 10' 6" Long.

4. 340ea. SSMA 600S200-54 16ga, 50ksi 6" Wide Metal Stud with 2" Flange 11' 6" Long.

5. 140ea. SSMA 600S200-54 16ga, 50ksi 6" Wide Metal Stud with 2" Flange 5' 6" Long.

6. 18ea. SSMA 1400T200-97 12ga, 50ksi Joist Track with 2" Flange 20ft. Long.

7. 140ea. SSMA 1400S200-97 12ga, 50ksi Roof Joists with 2" Flange 33' Long.

8. 140ea. SSMA 1400S200-97 12ga, 50ksi Roof Joists with 2" Flange 22' Long.

9. 12ea. SSMA 400S200-54 16ga, 50ksi 4" Wide Metal Studs with 2" Flange 11' 6" Long.

10. 21ea. SSMA 400T200-54 16ga, 50ksi 4" Wide Metal Top & Bottom Runner 10' Long.

11. 11ea. SSMA 1200S200-54 16ga, 50ksi Metal Boxed Header 14' Long.

12. 6ea. 6" x 6" x 1/4" ASTM (American Society For Testing and Materials) A500 Grade B, fy 46ksi

Square Tubing 25' Long.

13. 28ea. W14 x 26.0 x 25' Wide Flange Beams ASTM A36, fy 50ksi.

14. 4ea. C8 x 11.5 C Channel ASTM A36, fy 36ksi 20' Long.

15. 1ea. C10 x 15.3 C Channel ASTM A36, fy 36ksi 20' Long.

16. 4ea. 18" x 6" x 1/4" x 20' Rectangular Steel Tubing ASTM A36, fy 46ksi.

17. 3ea. 3/16" x 60" x 120" Steel Diamond Floor Plate A786 Grade 50, fy 50ksi.

18. 4ea. 1/4" x 60" x 120" Steel Diamond Floor Plate A786 Grade 50, fy 50ksi.

19. 130ea. 1.5b 22ga. 36” x 242” Roof Decking

20. 50ea. #5 Rebar Grade 40 - 20' Long.

21. 51ea. 11ga. H.R. Comm. Quality Sheet Metal 60” x 120”

22. 30ea. 4” x 4” x ¼” x 20’ Steel Angle Iron A36, fy 36ksi.

23. 4ea. 3” x 2” x ¼” x 20’ Steel Angle Iron A 36, fy 36ksi

24. 1ea. 1" x 1" x 3/16" x 20' Steel Angle Iron A36, fy 36ksi.

25. 1ea. ¾” x 20’ HR Round Bar Stock A36

26. 2ea. 6” (6.625OD) STD .280WL A500 Pipe 21’

27. 6ea. 6” Pipe Caps (6.625OD)

Standards

ASTM A786 Steel Floor Plate, also known as Steel Diamond Plate or Steel Tread Plate has a raised diamond lug pattern that provides excellent skid resistance for a wide range of applications commonly used in stairs, walkways, ramps and entrances where ‘rough’ or

‘high-wear’ surfaces are preferred.

• Specifications: ASTM A-786, medium 4-way pattern, commercial grade

• Mechanical Properties: Tensile = 60,000 +/-, Yield = 33,000 +/-

SSMA See Attachment ssmatechcatalog

ITEM DESCRIPTION FOR

STRUCTURAL STEEL AND METAL STUDS

ASTM A500 ASTM A500 Structural Steel Pipe, is a welded steel tube with a variety of sizes to meet the structural piping requirements for applications the water, petroleum, oil & gas and other industries. Carbon steel pipe can be structural in nature or used in fluid, gas, oil transmission. It has an internal weld seam that is measured in nominal size unlike DOM or Welded Round Tube. A500 Steel Pipe is a economical structural grade pipe with a smooth bare finish that has slighter higher mechanical properties than standard pipe.

Pipe

• Specifications: ASTM A500 Grade B; A106; A252, ASTM A53 Gr B, Type E, Tested

• Mechanical Properties: A500 - Tensile = 58,000, Yield = 46,000+/-

Square Tube

• Specifications: ASTM A513, ASTM A500 Grade B

• Mechanical Properties: Brinell = 63, Tensile = 58,000 +/-, Yield = 46,000 +/-

ASTM A36 ASTM A36 is a hot-rolled, low-alloy carbon steel that exhibits good tensile strength. Its properties include ductility, ease of machinability and welding. As a result, it is one of the most popular structural steels. A36 channel is available with a galvanized finish for increased corrosion resistance.

Channel

• AKA: HR steel channel, mild steel channel, steel C channel

• Mechanical Properties: Brinell = 112, Tensile = 58-80,000 +/-, Yield = 36,000 +/-

Wide Flange Beam

• AKA W Beam or H Beams have non-tapered flanges

• Specifications: ASTM A36 / A572 Gr. 50, the standard specification for steel structural shapes for use in general construction.

• Mechanical Properties: Tensile = 60/80,000 PSI, Yield = 36,000 PSI, Brinell Hardness

= 137 (+/-)

Angle

• Mechanical Properties: Tensile = 58-80,000 +/-, Yield = 36,000+/-

Round Bar-Stock

• Mechanical Properties: Brinell = 112, Tensile = 58-80,000 +/-, Yield = 36,000 +/-